Chair of Chemistry of Polymeric Materials (231)

Organisational unit: Chair

1 - 500 out of 730Page size: 500

Publications / Theses

  1. 2023
  2. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124, 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2021
  4. Published

    Hybrid silica micro-particles with light-responsive surface properties and Janus-like character

    Romano, A., Sangermano, M., Rossegger, E., Mühlbacher, I., Griesser, T., Giebler, M., Palmara, G., Frascella, F., Roppolo, I. & Schlögl, S., 21 Jul 2021, In: Polymer Chemistry. 12, 27, p. 3925-3938 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Tailoring the chemical functionalization of a transparent polyethylene foil for its application in an OLED-based DNA biosensor

    Daniso, E., Maroh, B., Feldbacher, S., Mühlbacher, I., Schlögl, S. & Melpignano, P., 30 Jun 2021, In: Applied surface science. 552, 149408.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Introduction of Photolatent Bases for Locally Controlling Dynamic Exchange Reactions in Thermo-Activated Vitrimers

    Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Rieger, B. & Schlögl, S., 21 Jun 2021, In: Angewandte Chemie - International Edition. 60, 26, p. 14302-14306 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Locally controlling dynamic exchange reactions in 3D printed thiol-acrylate vitrimers using dual-wavelength digital light processing

    Rossegger, E., Moazzen, K., Fleisch, M. & Schlögl, S., 7 Jun 2021, In: Polymer Chemistry. 12, 21, p. 3077-3083 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits

    Krawczyk, K. K., Groten, J., Glushko, O., Krivec, M., Frühwirth, M., Schulz, G., Wolf, C., Hartmann, D., Moser, M., Cordill, M. J., Stadlober, B. & Griesser, T., 27 Apr 2021, In: Chemistry of materials. 33, 8

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

    Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 20 Apr 2021, In: Journal of applied polymer science. 138, 16, 50239.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    High resolution additive manufacturing with acrylate based vitrimers using organic phosphates as transesterification catalyst

    Rossegger, E., Höller, R., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Griesser, T. & Schlögl, S., 14 Apr 2021, In: Polymer. 221, 14 April, 7 p., 123631.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Role of Organic Phosphates and Phosphonates in Catalyzing Dynamic Exchange Reactions in Thiol-Click Vitrimers

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 14 Apr 2021, In: Macromolecular chemistry and physics.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Dielectric properties of shrinkage-free poly(2-oxazoline) networks from renewable resources

    Blaschke, F., Marx, P., Hirner, S., Mühlbacher, I., Wewerka, K. & Wiesbrock, F., 2 Apr 2021, In: Polymers. 13, 8, 1263.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Approaches Toward In Situ Reinforcement of Organic Rubbers: Strategy and Recent Progress

    Strohmeier, L., Schrittesser, B. & Schlögl, S., 28 Mar 2021, In: Polymer reviews.

    Research output: Contribution to journal › Review article › peer-review

  15. Published

    Application of organosilane coatings for improvedanti-adhesive properties enabling facilitated demoldingin polymer processing

    Bandl, C., Krempl, N., Berger-Weber, G., Kern, W. & Friesenbichler, W., 10 Mar 2021, In: Journal of Applied Polymer Science. 2021, 10 p., 50714.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Expanding monomers as anti-shrinkage additives

    Marx, P. & Wiesbrock, F., 1 Mar 2021, In: Polymers. 13, 5, 806.

    Research output: Contribution to journal › Review article › peer-review

  17. Published

    Assessment of the chemical degradation of PFPE lubricants and greases for space applications: implications for long-term on-ground storage

    Wolfberger, A., Hausberger, A., Schlögl, S. & Hołyńska, M., 18 Feb 2021, In: CEAS space journal.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Resins for frontal photopolymerization: Combining depth-cure and tunable mechanical properties

    Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 2 Feb 2021, In: Materials. 14, 4, p. 1-10 10 p., 743.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices

    Lassnig, A., Terziyska, V. L., Zalesak, J., Jörg, T., Toebbens, D. M., Griesser, T., Mitterer, C., Pippan, R. & Cordill, M. J., 22 Jan 2021, In: ACS Applied Nano Materials. 4, 1, p. 61-70 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Funktionalisierung und Optimierung von Anti-Haft-Beschichtungen auf Organosilan-Basis

    Müller, M., 2021

    Research output: Thesis › Master's Thesis

  21. Published

    Thiol-En basierte Vitrimere für Formgedächtnis-unterstützte Selbstheilung von Photopolymeren

    Hron, T., 2021

    Research output: Thesis › Master's Thesis

  22. 2020
  23. Published

    Recent Advances in Functional Polymers Containing Coumarin Chromophores

    Cazin, I., Rossegger, E., Guedes de la Cruz, G., Griesser, T. & Schlögl, S., 25 Dec 2020, In: Polymers. 13.2021, 1, 48 p., 56.

    Research output: Contribution to journal › Review article › peer-review

  24. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    2-Methoxyhydroquinone from Vanillin for Aqueous Redox-Flow Batteries

    Schlemmer, W., Nothdurft, P., Petzold, A., Riess, G., Frühwirt, P., Schmallegger, M., Gescheidt-Demner, G., Fischer, R., Freunberger, S. A., Kern, W. & Spirk, S., 14 Dec 2020, In: Angewandte Chemie. 59.2020, 51, p. 22943-22946

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Digital light processing 3D printing with thiol-Acrylate vitrimers

    Rossegger, E., Höller, R., Reisinger, D., Strasser, J., Fleisch, M., Griesser, T. & Schlögl, S., 14 Dec 2020, In: Polymer Chemistry. 12.2021, 5, p. 639-644 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of Accelerated Aging on the Chemical Signature and Performance of a Multiply-Alkylated Cyclopentane (MAC) Lubricant for Space Applications

    Wolfberger, A., Zehl, M., Hausberger, A., Tockner, M., Schlögl, S., Hołyńska, M. & Semprimoschnig, C., 8 Dec 2020, In: Tribology Letters. 69.2021, 3, 13 p., 3.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Thermomechanical and microhardness data of melamine-formaldehyde-based self-healing resin film able to undergo reversible crosslinking via Diels-Alder reaction

    Urdl, K., Christöfl, P., Weiss, S., Kandelbauer, A., Müller, U. & Kern, W., Dec 2020, In: Data in Brief. 33, 106559.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  31. Published

    Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

    Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 4 Nov 2020, In: Journal of Applied Polymer Science. 138.2021, 16, 13 p., 50239.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The Chemistry of Acylgermanes: Triacylgermenolates Represent Valuable Building Blocks for the Synthesis of a Variety of Germanium-Based Photoinitiators

    Frühwirt, P., Knoechl, A., Pillinger, M., Müller, S. M., Wasdin, P. T., Fischer, R. C., Radebner, J., Torvisco, A., Moszner, N., Kelterer, A. M., Griesser, T., Gescheidt, G. & Haas, M., 19 Oct 2020, In: Inorganic chemistry. 59, 20, p. 15204-15217 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Investigation of the Adsorption Behavior of Jet-Cooked Cationic Starches on Pulp Fibers

    Ferstl, E., Gabriel, M., Gomernik, F., Müller, S. M., Selinger, J., Thaler, F., Bauer, W., Uhlig, F., Sprik, S. & Chemelli, A., 29 Sept 2020, In: Polymers. 12.2020, 10, 13 p., 2249.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Photopatternable and Rewritable Epoxy-Anhydride Vitrimers

    Giebler, M., Alabiso, W., Wieser, V., Radl, S. & Schlögl, S., 29 Sept 2020, In: Macromolecular rapid communications.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements

    Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S., 9 Sept 2020, In: Polymer. 204, 122804.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Review on UV-induced cationic frontal polymerization of epoxy monomers

    Malik, M. S., Schlögl, S., Wolfahrt, M. & Sangermano, M., Sept 2020, In: Polymers. 12, 9, 2146.

    Research output: Contribution to journal › Review article › peer-review

  37. Published

    GEBIRGSANKER MIT SENSOR ZUR MESSUNG MECHANISCHER SPANNUNG

    Moser, P. (Inventor), Feiel, S. (Inventor), Kern, W. (Inventor) & Griesser, T. (Inventor), 27 Aug 2020, IPC No. E21D 21/ 02 A I, Patent No. WO2020169356, Priority date 19 Feb 2019, Priority No. AT20190060039

    Research output: Patent

  38. Published

    Design and characterisation of vitrimer-like elastomeric composites from HXNBR rubber

    Kaiser, S., Jandl, J., Novak, P. & Schlögl, S., 3 Aug 2020, In: Soft Matter. 16.2020, 37, p. 8577-8590 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The impact of vitrimers on the industry of the future: Chemistry, properties and sustainable forward-looking applications

    Alabiso, W. & Schlögl, S., Aug 2020, In: Polymers. 12, 8, 1660.

    Research output: Contribution to journal › Review article › peer-review

  40. Published

    Multilayer coatings based on the combination of perfluorinated organosilanes and nickel films for injection moulding tools

    Calderon, J. C., Koch, L., Bandl, C., Kern, W., Jilg, J., Schilp, C., Moritzer, E. & Grundmeier, G., 8 Jul 2020, In: Surface & coatings technology. 399.2020, 15 October, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 1 Jul 2020, In: ChemPhotoChem . 4, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Digital light processing 3D printing of modified liquid isoprene rubber using thiol-click chemistry

    Strohmeier, L., Frommwald, H. & Schlögl, S., 22 Jun 2020, In: RSC Advances. 10, 40, p. 23607-23614 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Recent trends in applying ortho-nitrobenzyl esters for the design of photo-responsive polymer networks

    Romano, A., Roppolo, I., Rossegger, E., Schlögl, S. & Sangermano, M., 2 Jun 2020, In: Materials. 13, 12, p. 1-26 26 p., 2777.

    Research output: Contribution to journal › Review article › peer-review

  44. Published

    Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

    Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Ultra-High Through-Cure of (Meth) Acrylate Copolymers via Photofrontal Polymerization

    Ebner, C., Mitterer, J., Eigruber, P., Stieger, S., Rieß, G. & Kern, W., 1 Jun 2020, In: Polymers. 12, 6, 1291.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Adhesives for “debonding-on-demand”: Triggered release mechanisms and typical applications

    Bandl, C., Kern, W. & Schlögl, S., Jun 2020, In: International Journal of Adhesion and Adhesives. 99, 102585.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

    Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Photo-switching of surface wettability on micropatterned photopolymers for fast transport of water droplets over a long-distance

    Rossegger, E., Nees, D., Turisser, S., Radl, S., Griesser, T. & Schlögl, S., 14 May 2020, In: Polymer Chemistry. 11, 18, p. 3125-3135 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    3D multiphoton lithography using biocompatible polymers with specific mechanical properties

    Buchroithner, B., Hartmann, D., Mayr, S., Oh, Y. J., Sivun, D., Karner, A., Buchegger, B., Griesser, T., Hinterdorfer, P., Klar, T. A. & Jacak, J., 9 May 2020, In: Nanoscale advances. 2.2020, 6, p. 2422-2428 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Laser-Triggered Writing and Biofunctionalization of Thiol-Ene Networks

    Romano, A., Angelini, A., Rossegger, E., Palmara, G., Castellino, M., Frascella, F., Chiappone, A., Chiadò, A., Sangermano, M., Schlögl, S. & Roppolo, I., 1 May 2020, In: Macromolecular rapid communications. 41, 10, 2000084.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 20 Mar 2020, In: ChemPhotoChem . 4.2020, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Fast gas chromatography–mass spectrometry method for the detection of gas phase composition of polyurethane foam and its role in foam thermal conductivity

    Galakhova, A. & Rieß, G., 17 Mar 2020, In: Journal of Cellular Plastics [Elektronische Ressource]. 56.2020, 5, p. 531-545 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Diels-Alder modified self-healing melamine resin

    Urdl, K., Weiss, S., Christöfl, P., Kandelbauer, A., Müller, U. & Kern, W., 15 Mar 2020, In: European polymer journal. 127, 109601.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Diels-Alder modified self-healing melamine resin

    Urdl, K., Weiss, S., Christoefl, P., Kandelbauer, A., Mueller, U. & Kern, W., 6 Mar 2020, In: European polymer journal. 127-2021, 15 March, 12 p., 109601.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Adhesives for “debonding-on-demand”: triggered release mechanisms and typical applications

    Bandl, C., Kern, W. & Schlögl, S., 5 Mar 2020, In: International Journal of Adhesion and Adhesives. 99.2020, June, 36 p., 102585.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Tribological characteristics of medical gloves in contact with human skin and skin equivalents

    Manhart, J., Hausberger, A., Maroh, B., Holzner, A., Schaller, R., Kern, W. & Schlögl, S., Feb 2020, In: Polymer Testing. 82.2020, February, 7 p., 106318.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Development of dismantable adhesives and reversible bonding concepts for photovoltaic applications

    Wanghofer, F., 2020

    Research output: Thesis › Master's Thesis

  59. Published

    Flame Retardants

    Fink, J., 2020

    Research output: Book/Report › Book › Research

  60. Published

    Funktionelle Lack- und Harzsysteme zur additiven Fertigung von Medizinprodukten und gedruckten Leiterbahnen

    Hartmann, D. G., 2020

    Research output: Thesis › Doctoral Thesis

  61. Published

    Hydraulic Fracturing Chemicals and Fluids Technology Second Edition

    Fink, J., 2020, Elsevier.

    Research output: Book/Report › Book › Research

  62. Published

    Influences of Morphology Controllable Alumina on the Thermal Conductivity of Composites of Silicone Rubber

    Zou, Z., Wu, W., Wang, Y., Kern, W. & Drummer, D., 2020, In: Gaofenzi-cailiao-kexue-yu-gongcheng = Polymer materials science and engineering / Chengdu Keji Daxue Gaofenzi Yanjiusuo. 2020, 36(4)

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    The Chemistry of Bio-based Polymers: Second Edition

    Fink, J., 2020

    Research output: Book/Report › Book › Research

  64. Published

    The Chemistry of Environmental Engineering

    Fink, J., 2020

    Research output: Book/Report › Book › Research

  65. Published

    Thermomechanical and microhardness data of melamine-formaldehyde-based self-healing resin film able to undergo reversible crosslinking via Diels-Alder reaction

    Urdl, K., Christöfl, P., Weiss, S., Kandelbauer, A., Müller, U. & Kern, W., 2020, In: Data in Brief. 2020, 33

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Verfahren zur Herstellung einer flüssigen Formulierung für die Herstellung eines Elastomers im 3-D-Druck, Formulierung daraus und deren Verwendung

    Frommwald, H. (Inventor), Strohmeier, L. (Inventor) & Schlögl, S. (Inventor), 2020, Patent No. 50051/2020, 23 Jan 2020, Priority date 15 Mar 2021, Priority No. AT 522889 B1

    Research output: Patent

  67. 2019
  68. Published

    Simple and rapid method for restoring anti-adhesive organosilane coatings on metal substrates

    Bandl, C., Kern, W., Krempl, N. & Friesenbichler, W., 20 Dec 2019, In: Progress in organic coatings. 140.2020, March, 105490.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior

    Du, C., Soeler, R., Völker, B., Matoy, K., Zechner, J., Langer, G., Reisinger, M., Todt, J., Kirchlechner, C. & Dehm, G., 1 Dec 2019, In: Materialia. 8, 100503.

    Research output: Contribution to journal › Article › Research › peer-review

  70. E-pub ahead of print

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G. G., 18 Nov 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 545-551 7 p.

    Research output: Contribution to journal › Article › Research

  71. E-pub ahead of print

    Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno)cellulosic surfaces revealed by nanoindentation

    Herzele, S., van Herwijnen, H. W., Griesser, T., Gindl-Altmutter, W., Rößler, C. & Konnerth, J., 14 Nov 2019, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 98.2020, April, 102507.

    Research output: Contribution to journal › Article › Research › peer-review

  72. E-pub ahead of print

    3D-Printing of High-κ Thiol-Ene Resins with Spiro-Orthoesters as Anti-Shrinkage Additive

    Marx, P., Romano, A., Roppolo, I., Chemelli, A., Mühlbacher, I., Kern, W., Chaudhary, S., Andritsch, T., Sangermano, M. & Wiesbrock, F., 14 Oct 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 12, 10 p., 1900515.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Chemical versus physical grafting of photoluminescent amino-functional carbon dots onto transparent nematic nanocellulose gels and aerogels

    Quraishi, S., Plappert, S. F., Grießer, T., Gindl-Altmutter, W. & Liebner, F. W., 30 Sept 2019, In: Cellulose. 26, 13-14, p. 7781-7796 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Molecularly imprinted polymers by thiol–yne chemistry: making imprinting even easier

    Paruli, E., Griesser, T., Merlier, F., Gonzato, C. & Haupt, K., 14 Sept 2019, In: Polymer Chemistry. 10.2019, 34, p. 4732-4739 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Investigation of the Applicability of Neogene Sediments as Fillers for Polymeric Materials

    Wegerer, E. & Aust, N., 11 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Physical foaming and crosslinking of polyethylene with modified talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 1 Sept 2019, In: Polymers. 11, 9, 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  78. Published

    Data on production and characterization of melamine-furan-formaldehyde particles and reversible reactions thereof

    Urdl, K., Weiss, S., Hesser, G., Kandelbauer, A., Zikulnig-Rusch, E., Müller, U. & Kern, W., 1 Aug 2019, In: Data in Brief. 25, 104056.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Homogeneous, monodispersed furan-melamine particles performing reversible binding and forming networks

    Urdl, K., Weiss, S., Brodbeck, B., Kandelbauer, A., Zikulnig-Rusch, E., Müller, U. & Kern, W., 1 Jul 2019, In: European polymer journal. 116, p. 158-168 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

    Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. & Schlögl, S., 2 May 2019, In: International journal of biomaterials . 2019, p. 2019 12 p., Article ID 2393481.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Dual-Cure Coatings: Spiroorthoesters as Volume-Controlling Additives in Thiol–Ene Reactions

    Marx, P., Romano, A., Fischer, R., Roppolo, I., Sangermano, M. & Wiesbrock, F., Apr 2019, In: Macromolecular materials and engineering. 304, 4, 1800627.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Copper/epoxy joints in printed circuit boards: Manufacturing and interfacial failure mechanisms

    Nothdurft, P., Riess, G. & Kern, W., 12 Feb 2019, In: Materials. 12, 3, 550.

    Research output: Contribution to journal › Review article › peer-review

  83. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, p. 1 - 5 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Preparation of a water-based photoreactive azosulphonate-doped poly(vinyl alcohol) and the investigation of its UV response

    Nothdurft, P., Schauberger, J. G., Riess, G. & Kern, W., 18 Jan 2019, In: Polymers / Molecular Diversity Preservation International. 11, 1, 169.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    UV-Induced reduction of graphene oxide in cellulose nanofibril composites

    Pottathara, Y. B., Thomas, S., Kalarikkal, N., Griesser, T., Grohens, Y., Bobnar, V., Finšgar, M., Kokol, V. & Kargl, R., 14 Jan 2019, In: New Journal of Chemistry. 43.2019, 2, p. 681-688 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 9 Jan 2019, IPC No. C08J 5/ 02 A I, Patent No. EP3423514, Priority date 2 Mar 2017, Priority No. WO2017AT60052

    Research output: Patent

  87. Published

    3D Industrial Printing with Polymers

    Fink, J., 2019, Beverly, MA Hoboken, New Jersey. 326 p.

    Research output: Book/Report › Book › Research

  88. Published

    Additive manufacturing of tailored lightweight mechanical metamaterials for industrial applications

    Truszkiewicz, E., Meier, G., Vetter, M., Rossegger, M., Schlögl, S. & Fuchs, P. F., 2019, Tagungsband First European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Comparison of the photolytic versus the hydrolytic degradation of dual-responsive polydimethylsiloxane networks

    Giebler, M., Radl, S., Ast, M., Grießer, T. & Schlögl, S., 2019.

    Research output: Contribution to conference › Poster › Research

  90. Published

    Development of pressure sensitive adhesive tapes for temporary applications at high temperatures

    Bandl, C., 2019

    Research output: Thesis › Doctoral Thesis

  91. Published

    Directed motion of water droplets on multi-gradient photopolymer surfaces

    Rossegger, E., Hennen, D., Roppolo, I., Grießer, T. & Schlögl, S., 2019, In: Polymer Chemistry. 2019, 10, p. 1882 – 1893 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Directed motion of water droplets on multi-gradient photopolymer surfaces

    Rossegger, E., Hennen, D., Grießer, T., Roppolo, I. & Schlögl, S., 2019.

    Research output: Contribution to conference › Poster › Research

  93. Published

    Evaluierung von Thiol-Alkin-Methacrylat-Systemen für die Additive Fertigung von keramischen Komposit-Strukturen

    Sommer, K., 2019

    Research output: Thesis › Master's Thesis

  94. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of orthodontic clear aligners

    Schwarz, R. & Griesser, T. (Co-editor), 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Fast Cross-Linking-Characterization of Waveguide-Polymers on Wafers by Imaging Low-Coherence Interferometry

    Taudt, C., Nelsen, B., Schlögl, S., Koch, E. & Hartmann, P., 2019, In: Proceedings / MDPI AG . 2.2018, 13, 1046.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Functional Synthetic Polymers

    Fink, J., 2019, Wiley-Blackwell.

    Research output: Book/Report › Book › Research

  97. Published

    Identification and Quantification of Cell Gas Evolution in Rigid Polyurethane Foams by Novel GCMS Methodology

    Galakhova, A., Rieß, G., Santiago-Calvo, M., Tirado-Mediavilla, J., Villafane, F. & Rodriguez-Perez, M. A., 2019, In: Polymers / Molecular Diversity Preservation International. 11, 7, p. 1192-1202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Inkjet Printing: A Versatile Method for The Fabrication of Functional Patterns

    Samusjew, A., 2019

    Research output: Thesis › Doctoral Thesis

  99. Published

    Liquid Silicone Rubber

    Fink, J., 2019, Wiley-Blackwell.

    Research output: Book/Report › Book › Research

  100. Published

    Oberflächenfunktionalisiertes Talkum zur Optimierung der Vernetzungsstruktur und der Schaummorphologie von Polyethylen

    Kaltenegger-Uray, A., 2019

    Research output: Thesis › Doctoral Thesis

  101. Published

    Polyethylene Nanocomposites for Power Cable Insulations

    Plesa, G.-I., Schlögl, S., Noţingher, P., Stancu, C. & Wiesbrock, F., 2019, In: Polymers / Molecular Diversity Preservation International. 11.2019, 1

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Polyols bearing azosulphonate units as novel additives for polyurethane foams

    Galakhova, A., 2019

    Research output: Thesis › Doctoral Thesis

  103. Published

    Polyurethan-Nanocomposite als Werkstoffe zur Schwingungsisolierung

    Ziegler, W., 2019

    Research output: Thesis › Doctoral Thesis

  104. Published

    Self-Healing Approaches for Melamine-Based Surfaces

    Urdl, K., 2019

    Research output: Thesis › Doctoral Thesis

  105. Published

    Stabile wässrige Zusammensetzungen umfassend Chinone und deren Verwendung in Redox-Flow-Batterien

    Schlemmer, W. (Inventor), Spirk, S. (Inventor), Kern, W. (Inventor), Nothdurft, P. (Inventor) & Sahin, M. (Inventor), 2019, Patent No. 19212222.4-1108, 28 Nov 2019

    Research output: Patent

  106. Published

    Zeta Potential Measurments for Surface Characterization: Streaming Potential & Electrophoresis

    Mühlbacher, I., Schlögl, S. & Wiesbrock, F., 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. 2018
  108. Published

    Thiol-Yne Photo-Click Chemistry—Towards Biocompatible and Tough Photopolymers for 3D Printing

    Hartmann, D. G., Oesterreicher, A. (Co-editor) & Grießer, T. (Co-editor), 26 Nov 2018.

    Research output: Contribution to conference › Poster › Research

  109. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Furan-functionalised melamine-formaldehyde particles performing Diels-Alder reactions

    Urdl, K., Weiss, S., Karpa, A., Perić, M., Zikulnig-Rusch, E., Brecht, M., Kandelbauer, A., Müller, U. & Kern, W., 1 Nov 2018, In: European polymer journal. 108, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Dual-Responsive Polydimethylsiloxane Networks

    Giebler, M., Radl, S. V., Ast, M., Kaiser, S., Griesser, T., Kern, W. & Schlögl, S., 15 Oct 2018, In: Journal of Polymer Science, Part A: Polymer Chemistry. 56, 20, p. 2319-2329 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Influence of different polyol segments on the crystallisation behavior of polyurethane elastomers measured with DSC and DMA experiments

    Ziegler, W., Guttmann, P., Kopeinig, S., Dietrich, M., Amirosanloo, S., Riess, G. & Kern, W., 1 Oct 2018, In: Polymer Testing. 71, p. 18-26 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Photo-triggered self-healing of elastomers

    Manhart, J., Kern, W. & Schlögl, S., 1 Oct 2018, In: Kautschuk, Gummi, Kunststoffe : KGK. 71, 9, p. 30-32 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Kern, W., Bandl, C., Friesenbichler, W. & Gröger, T., Oct 2018, 2 p. 4020 Linz

    Research output: Other contribution › Research

  115. Published

    Mineralogical properties of continental related pelites in the Eastern Alps

    Wegerer, E., Wessely, G. & Aust, N., 24 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  116. Published

    Stratigraphic distribution and lithofacial variations of Carboniferous shales

    Wegerer, E., Aust, N. & Rachetti, A., 17 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  117. Published

    UV-curable Inkjet-Inks for the Printing on Surfaces with Frequent Skin Contact

    Hartmann, D. G., Edler, M. (Co-editor), Oesterreicher, A. (Co-editor) & Grießer, T. (Co-editor), 3 Sept 2018.

    Research output: Contribution to conference › Poster › Research

  118. Published

    Reconstructing Lithofacial Variations and Depositional Processes in Carboniferous Black Shales

    Wegerer, E. & Aust, N., 16 Aug 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  119. Published

    Surface characterization of copper substrates modified with carboxyl terminated phosphonic acids

    Nothdurft, P., Feldbacher, S., Jakopic, G., Mühlbacher, I., Pötz, S. & Kern, W., 1 Aug 2018, In: International Journal of Adhesion and Adhesives. 84, p. 143-152 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Corrigendum to “Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane”[Int. J. Biol. Macromol. 106 (2018) 1288–1296](S0141813017321785)(10.1016/j.ijbiomac.2017.08.136)

    Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M. & Griesser, T., 1 Jul 2018, In: International Journal of Biological Macromolecules. 113, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  121. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2, 2

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide

    Kettner, O., Šimić, S., Kunert, B., Schennach, R., Resel, R., Grießer, T. & Friedel, B., 1 Jun 2018, In: Advanced Engineering Materials. 20, 6, 1701067.

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

    Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W., Friesenbichler, W. & Berger-Weber, G., 20 Apr 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  126. Published

    Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

    Kaynak, B., Spörk, M., Shirole, A., Ziegler, W. & Sapkota, J., 14 Apr 2018, In: Macromolecular materials and engineering. 12, p. 1800037

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Tailoring the interfaces in glass fiber-reinforced photopolymer composites

    Sahin, M., Schlögl, S., Kalinka, G., Wang, J., Kaynak, B., Mühlbacher, I., Ziegler, W., Kern, W. & Grützmacher, H., 11 Apr 2018, In: Polymer. 141, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates

    Samusjew, A., Lassnig, A., Cordill, M. J., Krawczyk, K. & Grießer, T., 1 Apr 2018, In: Advanced Materials Technologies. 3, 4, 1700250.

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Influence of Environmentally Affected Hole-Transport Layers on Spatial Homogeneity and Charge-Transport Dynamics of Organic Solar Cells

    Chien, H. T., Pilat, F., Griesser, T., Fitzek, H., Poelt, P. & Friedel, B., 28 Mar 2018, In: ACS Applied Materials and Interfaces. 10, 12, p. 10102-10114 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Enhancement of the Insulation Properties of Poly(2-oxazoline)-co-Polyester Networks by the Addition of Nanofillers

    Eibel, A., Marx, P., Jin, H., Tsekmes, I. A., Mühlbacher, I., Smit, J. J., Kern, W. & Wiesbrock, F., 1 Mar 2018, In: Macromolecular rapid communications. 39, 6, 1700681.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 24-31 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Interaction of industrially relevant cationic starches with cellulose

    Niegelhell, K., Chemelli, A., Hobisch, J., Griesser, T., Reiter, H., Hirn, U. & Spirk, S., 1 Jan 2018, In: Carbohydrate Polymers. 179, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Photoactive silica nanoparticles: Influence of surface functionalization on migration and kinetics of radical-induced photopolymerization reactions

    Sahin, M., Krawczyk, K. K., Roszkowski, P., Wang, J., Kaynak, B., Kern, W., Schlögl, S. & Grützmacher, H., 1 Jan 2018, In: European polymer journal. 98, p. 430-438 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane

    Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M. & Griesser, T., 1 Jan 2018, In: International Journal of Biological Macromolecules. 106, p. 1288-1296 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Tuning of material properties of ZnO thin films grown by plasma-enhanced atomic layer deposition at room temperature

    Pilz, J., Perrotta, A., Christian, P., Tazreiter, M., Resel, R., Leising, G., Griesser, T. & Coclite, A. M., 1 Jan 2018, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 36, 1, 01A109.

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    About switchable material properties and selfhealing strategies: using the reversible nature of anthracenes in stimuli-responsive polymers

    Radl, S., Giebler, M., Kaiser, S., Manhart, J. C., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  138. Published

    About switchable material properties and selfhealing strategies: using the reversible nature of anthracenes in stumuli-responsive polymers

    Radl, S., Giebler, M., Kaiser, S., Manhart, J., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  139. Published

    Aktivierung und Charakterisierung von Kunststoffoberflächen

    Kern, W. & Fankhauser, P., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Antiadhäsive Hybrid-Beschichtungen für Formen und Werkzeuge in der Kunststoffverarbeitung

    Kaynak, B., Fecke, N. & Kern, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Antiblocking Additives

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 833 852 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  142. Published

    Beschichtungen für Formen und Werkzeuge in der kunststoffverarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Beschichtung mit beschränkter Haftung

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. p. 49 52 p., 8.

    Research output: Contribution to journal › Article › Research

  144. Published

    Bio-Polyethylene and Polyethylene-Biopolymer Blends

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 1253 1296 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  145. Published

    Comparison of the photolytic versus the hydrolytic degradation of dual-responsive polydimethylsiloxane network

    Giebler, M., Radl, S. V., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  146. Published

    Control of Material Behavior and Media Resistance of Carboxylated Nitrile Butadiene Rubber (XNBR)

    Fleischmann, D. D., Schlögl, S., Arbeiter, F. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  147. Published

    Design von schaltbaren Polymeren - neue Konzepte für intelligente Beschichtungen

    Schlögl, S. & Radl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Evaluierung eines Thiol-In-Systems für den Einsatz in biokompatiblen 3D-gedruckten Verbundmaterialien

    Rieger, P., 2018

    Research output: Thesis › Master's Thesis

  149. Published

    Fabrication of nanocomposites with silica nanoparticles

    Constantinescu, D. M., Apostol, D. A., Picu, C. R., Krawczyk, K., Sieberer, M., Hadar, A. & Feuchter, M., 2018, In: Materials Today: Proceedings. p. 26727 26732 p., 5.

    Research output: Contribution to journal › Conference article › peer-review

  150. Published

    Fuel Cells, Solar Panels, and Storage Devices

    Fink, J., 2018, Wiley-VCH .

    Research output: Book/Report › Book › Research

  151. Published

    In situ reinforcement of high-performance elastomers with thermosetting resins

    Fleischmann, D. D., 2018

    Research output: Thesis › Doctoral Thesis

  152. Published

    Lubricants for Polyethylene

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 877 888 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  153. Published

    Materials, Chemicals and Methods for Dental Applications

    Fink, J., 2018, Beverly, MA Hoboken, New Jersey. 324 p.

    Research output: Book/Report › Book › Research

  154. Published

    Modified Natural Rubber Surface with Tunable Tribological Properties

    Maroh, B., Manhart, J. C., Hausberger, A., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  155. Published

    Nonokomposite als Hochleistungs-Dielektrika für elektronische Anwendungen

    Marx, P., Wiesbrock, F. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  156. Published

    Photochemical modification of natural rubber surfaces to tune tribological properties

    Maroh, B., Manhart, J. C. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Photochemical modification of natural rubber surfaces to tune tribological properties

    Maroh, B., Manhart, J. C. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  158. Published

    Photo-responsive thiol-ene networks for the design of surfaces with polarity gradient

    Rossegger, E., Radl, S., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  159. Published

    Photo-responsive thiol-ene networks for the design of surface with polarity gradient

    Rossegger, E., Radl, S. V., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  160. Published

    Polyethylene Fiber Extrusion

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 669 693 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  161. Published

    Polymer Waste Management

    Fink, J., 2018, Beverly, USA. 367 p.

    Research output: Book/Report › Book › Research

  162. Published

    Reactive Polymers: Fundamentals and Applications

    Fink, J., 2018, 3. ed. Elsevier.

    Research output: Book/Report › Book › Research

  163. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Paper

  164. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  165. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Reversible Cycloadditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilunsstrategien und Rissdetektion

    Radl, S., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  167. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S. V., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Paper

  168. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S. V., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  169. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S., Kern, W. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Reversible switching of the adhesion in photo- and thermoresponsive elastomers

    Kaiser, S., Radl, S., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  171. Published

    Stimuli-responsive thiol-epoxy networks with photo-switchable bulk and surface properties

    Romano, A., Roppolo, I., Giebler, M., Dietliker, K., Možina, Š., Šket, P., Mühlbacher, I., Schlögl, S. & Sangermano, M., 2018, In: RSC Advances. 73.2018, 8

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    STUDY OF LOW MIGRATABLE PHOTOPOLYMER NETWORKS

    Sahin, M., 2018

    Research output: Thesis › Doctoral Thesis

  173. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums, 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzylester links

    Giebler, M., Radl, S. V., Ast, M., Grießer, T. & Kern, W., 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien. Vol. 8.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzylester links

    Giebler, M., Radl, S., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  176. Published

    Switching "on" and "off" the adhesion in stimuli-responsive elastomers

    Kaiser, S., Radl, S. V., Manhart, J., Ayalur-Karunakaran, S., Griesser, T., Moser, A., Ganser, C., Teichert, C., Kern, W. & Schlögl, S., 2018, In: Soft Matter. 14, 13, p. 2547-2559 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Switching on and off the Adhesion in Stimuli-responsive Elastomers

    Kaiser, S., Radl, S. V., Schlögl, S., Grießer, T. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  178. Published

    Synthesis and Applications of Stimuli-Responsive Elastomers

    Schlögl, S., Radl, S., Grießer, T. & Kern, W., 2018, Tagungsband Deutsche Kautschuktagung 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Verbesserte dielektrische Eigenschaften von poly(2-oxazolin)-basierenden Oberflächenbeschichtungen durch Zugabe von nanoskalierten Additiven

    Marx, P., Eibel, A., M.S., W., H., J., Tsekmes, I. A., Smit, J. J., Mühlbacher, I., Kern, W. & Wiesbrock, F., 2018, 27. Leobener Kunststoffkolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien. Vol. 8.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. Published

    Verbesserte dielektrische Eigenschaften von poly(2-oxazolin)-basierenden Oberflächenbeschichtungen durch Zugabe von nanoskalierten Additiven

    Marx, P., Eibel, A., M.S., W., H., J., Tsekmes, I. A., Smit, J. J., Mühlbacher, I., Kern, W. & Wiesbrock, F., 2018.

    Research output: Contribution to conference › Poster › Research

  181. Published

    Verfahren zur Herstellung eines Objektes aus einem Polymer mittels 3-D-Druckes, Österreichische Patentanmeldung

    Radl, S. (Inventor) & Schlögl, S. (Inventor), 2018, Patent No. A 50535/2018, 28 Jun 2018

    Research output: Patent

  182. 2017
  183. Published

    Novel silicone thermoplastic elastomers with tailored permeation properties

    Riess, G. & Kern, W., 14 Dec 2017, Proceedings of PPS 2016: The 32nd International Conference of the Polymer Processing Society - Conference Papers. Maazouz, A. (ed.). 120003. (AIP Conference Proceedings; vol. 1914).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    One-Step Noncovalent Surface Functionalization of PDMS with Chitosan-Based Bioparticles and Their Protein-Repellent Properties

    Bracic, M., Mohan, T., Grießer, T., Stana-Kleinschek, K., Strnad, S. & Fras-Zemlijc, 9 Nov 2017, In: Advanced Materials Interfaces. Volume 4, Issue 21, Article number 1700416

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 5/ 02 A I, Patent No. WO2017147637, Priority date 4 Mar 2016, Priority No. AT20160050173

    Research output: Patent

  186. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 5/ 02 A I, Patent No. WO2017147638, Priority date 4 Mar 2016, Priority No. AT20160050175

    Research output: Patent

  187. Published

    VERFAHREN ZUM HERSTELLEN EINES PROPHYLAXEARTIKELS

    Holzner, A. (Inventor), Kern, W. (Inventor), Manhart, J. C. (Inventor), Sahin, M. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 8 Sept 2017, IPC No. C08J 3/ 26 A I, Patent No. WO2017147639, Priority date 4 Mar 2016, Priority No. AT20160050176

    Research output: Patent

  188. Published

    Photo-Reversible Elastomeric Materials as Shape Memory Polymers and Reversible Adhesives

    Kaiser, S., Radl, S. V. (Co-editor), Grießer, T. (Co-editor), Kern, W. & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  189. Published

    Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links

    Giebler, M., Radl, S. V. (Co-editor), Ast, M. (Co-editor), Grießer, T., Kern, W. (Co-editor) & Schlögl, S. (Co-editor), 6 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  190. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  191. Published

    Exploring photo-curable thiol-yne resins for the 3D printing of biomedical devices

    Griesser, H., Oesterreicher, A. (Co-editor), Moser, A. (Co-editor), Schlögl, S. (Co-editor), Pichelmayer, M. (Co-editor) & Grießer, T. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  192. Published

    Light triggered formation of photo-responsive epoxy based networks

    Rinaldi, R., Radl, S. V. (Co-editor), Roppolo, I. (Co-editor), Pölzl, K. (Co-editor), Ast, M. (Co-editor), Spreitz, J. (Co-editor), Grießer, T. (Co-editor), Kern, W. (Co-editor), Schlögl, S. (Co-editor) & Sangermano, M. (Co-editor), 22 Aug 2017.

    Research output: Contribution to conference › Poster › Research

  193. E-pub ahead of print

    Simple method for the quantitative analysis of thin copolymer films on substrates by infrared spectroscopy using direct calibration

    Tazreiter, M., Christian, P., Schennach, R., Grießer, T. & Coclite, A. M., 21 Aug 2017, (E-pub ahead of print) In: Analytical Methods. 9.2017, 36, p. 5266-5273 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites

    Marx, P., Wanner, A. J., Zhang, Z., Jin, H., Tsekmes, I. A., Smit, J. J., Kern, W. & Wiesbrock, F., 1 Jun 2017, In: Polymers. 9, 6, 195.

    Research output: Contribution to journal › Article › Research › peer-review

  195. Published

    Highly Water-soluble alpha-Hydroxyalkylphenone Based Photoinitiator for Low-migration Applications

    Roth, M., Hennen, D., Oesterreicher, A., Mostegel, F., Samusjew, A., Edler, M., Maier, E. & Grießer, T., 18 Apr 2017, In: Macromolecular chemistry and physics. 218.2017, 14, 6 p., 1700022.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Neue anti-adhäsive Beschichtungen für Metalle

    Kaynak, B., Berger, G. & Kern, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 187-199 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  197. E-pub ahead of print

    The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons

    Berger, K., Keimel, C., Helfer, E., Haar, B., Mattausch, H., Riess, G. & Kern, W., 6 Mar 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 25, 8 p., 44968.

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Enhancing the stability of UV‐curable thiol/vinyl carbonate resins

    Edler, M., Mostegel, F., Roth, M., Österreicher, A. & Kappaun, S., 20 Feb 2017, In: Journal of Applied Polymer Science. 134.2017, 24, 7 p., 44934.

    Research output: Contribution to journal › Article › Research

  199. Published

    METHOD FOR PRODUCING A CROSSLINKED ELASTOMER

    Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 15 Feb 2017, IPC No. C08G 61/ 04 A I, Patent No. MY159943, Priority date 17 Mar 2009, Priority No. AT20090000421

    Research output: Patent

  200. Published

    Inkjet Printing of Soft, Stretchable Optical Waveguides through the Photopolymerization of High-Profile Linear Patterns

    Samusjew, A., Kratzer, M., Moser, A., Teichert, C. & Krawczyk, K., 17 Jan 2017, In: ACS Applied Materials & Interfaces. 9.2017, 5, p. 4941-4947 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Additives for High Performance Applications

    Fink, J., 2017, Wiley-VCH .

    Research output: Book/Report › Book › Research

  202. Published

    Anti-adhesive layers on stainless steel using thermally stable dipodal perfluoroalkyl silanes

    Kaynak, B., Alpan, C., Kratzer, M., Ganser, C., Teichert, C. & Kern, W., 2017, In: Applied surface science. 416, p. 824-833

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Clay minerals as geochemical- and facies indicators of an intercratonic rift basin

    Wegerer, E. & Aust, N., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  204. Published

    Design of Smart Elastomers with Tailored Network Architecture: From Advanced Crosslinking Strategies towards Stimuli-Responsive Materials with Spatially Resolved and Switchable Characteristics

    Manhart, J. C., 2017

    Research output: Thesis › Doctoral Thesis

  205. Published

    Document Simple method for the quantitative analysis of thin copolymer films on substrates by infrared spectroscopy using direct calibration

    Tazreiter, M., Christian, P., Schennach, R., Grießer, T. & Coclite, A. M., 2017, In: Analytical Methods. 9, 5266

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Efficient initiation of radical‐mediated thiol‐ene chemistry with photoactive silica particles

    Sahin, M., Schlögl, S., Kaiser, S., Kern, W., Wang, J. & H., G., 2017, In: Journal of polymer science : A, Polymer chemistry. p. 894-902 55.

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Enhancing the Stability of UV Curable Thiol/Vinyl Carbonate Resins

    Edler, M., Mostegel, F., Roth, M., Oesterreicher, A., Kappaun, S. & Grießer, T., 2017, In: Journal of Applied Polymer Science. 134, 44934

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Entwicklung von Kompositmaterialien für Hochspannungsanwendungen

    Andraschek, N., 2017

    Research output: Thesis › Doctoral Thesis

  209. Published

    Exploring functionalized benzophenones as low-migration photoinitiators for vinyl carbonate/thiol formulations

    Roth, M., Oesterreicher, A., Hennen, D., Edler, M., Kappaun, S., Mostegel, F. & Grießer, T., 2017, In: European polymer journal. 88, 403

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    Fast gas chromatography – mass spectrometry method for the separation of nitrogen, oxygen, carbon dioxide, cyclopentane, argon and its application in analysis of PU foam aging

    Galakhova, A. & Rieß, G. (Co-editor), 2017.

    Research output: Contribution to conference › Poster › Research

  211. Published

    Functional photopolymers with permanent and reversible crosslinks: design, characterization and application

    Schlögl, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  212. Published

    Interfacial adhesion in printed circuit boards

    Nothdurft, P., 2017

    Research output: Thesis › Doctoral Thesis

  213. Published

    Investigating photo-curable thiol-yne resins for biomedical materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Pinter, G., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017, In: Macromolecular materials and engineering. 302, 1600450, DOI: 10.1002/mame.201600450

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    Investigationg Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017

    Research output: Non-textual form › Web publication/site › Research

  215. Published

    Light triggered formation of photo-responsive epoxy based networks

    Radl, S. V., Roppolo, I., Pölzl, K., Ast, M., Spreitz, J., Grießer, T., Kern, W., Schlögl, S. & Sangermano, M., 2017, In: Polymer. 109, 349

    Research output: Contribution to journal › Article › Research › peer-review

  216. Published

    Neue Isolationsharze für die Hochspannungstechnik

    Wanner, A. J., 2017

    Research output: Thesis › Doctoral Thesis

  217. Published

    Perfluoralkylsilan Beschichtungen für Formen und Werkzeuge in der Kunststofftechnik

    Kaynak, B., 2017

    Research output: Thesis › Doctoral Thesis

  218. Published

    Photoreaktive Epoxidharze

    Pölzl, K., 2017

    Research output: Thesis › Master's Thesis

  219. Published

    Photo-responsive thiol-ene networks for the design of switchable polymer patterns

    Radl, S. V., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W. & Schlögl, S., 2017, In: Polymer Chemistry. 2017, p. 1562-1572 8.

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Reduced polarity and improved dispersion of microfibrillated cellulose in poly(lactic-acid) provided by residual lignin and hemicellulose

    Winter, A., Andorfer, L., Herzele, S., Zimmermann, T., Saake, B., Edler, M., Grießer, T., Konnerth, J. & Gindl-Altmutter, W., 2017, In: Journal of materials science. 52, 1, p. 60 - 72 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Suzuki-Miyaura coupling reactions using novel metal oxide supported ionic palladium catalysts

    Lichtenegger, G. J., Maier, M., Hackl, M., Khinast, J. G., Gössler, W., Grießer, T., Phani Kumar, V. S., Gruber-Woelfler, H. & Deshpande, P. A., 2017, In: Journal of molecular catalysis / A. 426, 39

    Research output: Contribution to journal › Article › Research › peer-review

  222. Published

    Synthesis and Characterization of Thiol-yne and Thiol-yne-methacrylate Derived Photo-curable Resins

    Wiener, J., 2017

    Research output: Thesis › Master's Thesis

  223. Published

    Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization

    Roszkowski, P., Sahin, M., Ayalur Karunakaran, S., Gammer, C., Schlögl, S., Kern, W. & Krawczyk, K., 2017, In: Polymer. 2017, 129, p. 207-220

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    The mineralogical composition of organic rich pelitic sediments associated with the syn- and post-rift phase of an intracratonic basin

    Wegerer, E. & Aust, N., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  225. Published

    Verfahren zur Frontalpolymerisation von kationisch polymerisierbaren Monomeren

    Liska, R. (Inventor), Bomze, D. (Inventor) & Kern, W. (Inventor), 2017, Patent No. WO 2017035551A1, Priority date 2 Sept 2015, Priority No. ATA576/2015

    Research output: Patent

  226. Published

    X-ray induced cationic curing of epoxy-bonded composites

    Puchleitner, R., Rieß, G. & Kern, W., 2017, In: European polymer journal. 91, p. 31-45

    Research output: Contribution to journal › Article › Research › peer-review

  227. 2016
  228. Published

    VERPACKUNGSELEMENT

    Brandstätter, A. (Inventor), Schlögl, S. (Inventor), Kramer, R. (Inventor) & Riess, G. (Inventor), 30 Nov 2016, IPC No. B32B 27/ 30 A I, Patent No. EP3098070, Priority date 29 May 2015, Priority No. AT20150050441

    Research output: Patent

  229. E-pub ahead of print

    Thiol-Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur-Karunakaran, S., Manhart, J., Wolfahrt, M., Kern, W. & Schlögl, S., 23 Nov 2016, (E-pub ahead of print) In: Advanced Engineering Materials. 19.2017, 4, 10 p., 1600620.

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    Flexible epoxy based composites with enhanced delamination resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Holzer, C. H. & Payer, M. (eds.). 080007. (AIP Conference Proceedings; vol. 1779).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Holzer, C. H. & Payer, M. (eds.). 080004. (AIP Conference Proceedings; vol. 1779).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Tough and Biocompatible Thiol-yne Based Photopolymers for 3D Printing of Biomedical Materials

    Grießer, T., 29 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  233. Published

    Measurements of viscoelasticity and adhesion force of polymer materials with large radius AFM tips

    Ganser, C., Czibula, C., Manhart, J., Radl, S., Schlögl, S., Hirn, U. & Teichert, C., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  234. Published

    Application of Vinyl Carbonates as Low-Toxic Monomers in Digital Inkjet Inks

    Edler, M., Mostegel, F. & Grießer, T., 12 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  235. Published

    Thiol-Yne Based Low-Cytotoxic Monomers: Towards Biocompatible and Tough Photopolymers for 3D Printing;

    Grießer, T., 11 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  236. Published

    Effect of water absorption on dielectric spectrum of nanocomposites

    Kochetov, R., Tsekmes, I. A., Morshuis, P. H. F., Smit, J. J., Wanner, A. J., Wiesbrock, F. & Kern, W., 22 Aug 2016, 34th Electrical Insulation Conference, EIC 2016. Institute of Electrical and Electronics Engineers Inc., p. 579-582 4 p. 7548669

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Distribution and variation of the inorganic fraction of Devonian to Bashkirian black shales in the north-western part of the Dniepr-Donets Basin, Ukraine

    Wegerer, E., Sachsenhofer, R., Misch, D. & Aust, N., 22 Apr 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  238. Published

    Neuartige Elastomerwerkstoffe auf Basis von Nanocompositen

    Ziegler, W., Rieß, G. (Co-editor), Winter, J. (Co-editor), Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt: Schriftenreihe Kunststofftechnik Leoben. Pinter, G. & Pilz, G. (eds.). Leoben, Vol. 6. p. 209-210 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    Adsorption Studies of Organophosphonic Acids on Differently Activated Gold Surfaces

    Niegelhell, K., Leimgruber, S., Grießer, T., Brandl, C., Chernev, B., Schennach, R., Trimmel, G. & Spirk, S., 16 Feb 2016, In: Langmuir. 32, 6, p. 1550-1559 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  241. Published

    Method for modifying the surface of an elastomer product

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schlögl, S. (Inventor), 29 Jan 2016, IPC No. C08K 9/ 04 A I, Patent No. PL2719720T, Priority date 9 Oct 2013, Priority No. EP20130187837

    Research output: Patent

  242. Published

    Reactive cellulose-based thin films-a concept for multifunctional polysaccharide surfaces

    Elschner, T., Reishofer, D., Kargl, R., Grießer, T., Heinze, T. & Kleinschek, K. S., 1 Jan 2016, In: RSC Advances. 6, 76, p. 72378-72385 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  243. Published

    Advanced Materials via thiol-ene click reactions

    Sahin, M., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  244. Published

    A Novel UV Tunable and Patternable Polyaniline Derivate as a Charge Injection Layer in OLEDs

    Simone, R., Grießer, T., Edler, M., Kern, W., Rath, T., Trimmel, G., Pavitschitz, A., Teichert, C., Simbrunner, C., Schwabegger, G. & Sitter, H., 2016.

    Research output: Contribution to conference › Poster › Research

  245. Published

    Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid)

    Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H. C., Keckes, J., Emsenhuber, G., Mahendran, A. R., Liebner, F. & Gindl-Altmutter, W., 2016, In: Cellular polymers. 8, 6

    Research output: Contribution to journal › Article › Research › peer-review

  246. Published

    Coupling of functionalised PTHF to amine-modified silica particles via aza-Michael reaction

    Winter, J., 2016

    Research output: Thesis › Master's Thesis

  247. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  248. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  249. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  250. Published

    Einfluss verschiedenster Modifizierungen auf das Sedimentationsverhalten von Bornitrid für die Verwendung in Beschichtungssystemen

    Andraschek, N., Ebner, C., Schweiger, M., Rieß, G. & Kern, W., 2016.

    Research output: Contribution to conference › Poster › Research

  251. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  252. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization;

    Oesterreicher, A.; Ayalur-Karunakaran, S.; Moser, A.; Mostegel, F.H.; Edler, M.; Kaschnitz, P.; Pinter, G.; Trimmel, G.; Schlögl, S.; Griesser, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, , 21, p. 3484-3494.

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Film formation and network characteristics of thiol-ene elastomers

    Trutschel, M., Chassé, W., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2016.

    Research output: Contribution to conference › Presentation › Research

  255. Published

    Guide to the practical use of chemicals in refineries and pipelines

    Fink, J., 2016, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  256. Published

    Herstellung und Recyclingfähigkeit von Kunststoffverbunden

    Kern, W., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  257. Published

    High Performance Additives

    Fink, J., 2016, Wiley-VCH .

    Research output: Book/Report › Book › Research

  258. Published

    Inorganic geochemical components of Paleozoic source rocks associated with basin stratigraphy and depositional processes

    Wegerer, E., Aust, N. & Rachetti, A., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  259. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Christine, B., Schlögl, S., Feldbacher, S. & Kern, W., 2016.

    Research output: Contribution to conference › Poster › Research

  260. Published

    Investigation of temporary binding pressure sensitive adhesives comprising external triggered release

    Bandl, C., Schlögl, S., Feldbacher, S. & Kern, W., 2016, Proceedings of the 11th European Adhesion Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  262. Published

    Lithofacial characteristics of Devonian to Bashkirian black shales and the sedimentary environment of the Dniepr-Donets Basin, Ukraine

    Wegerer, E. & Aust, N., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  263. Published

    Low migration type I photoinitiators for biocompatible thiol-ene formulations

    Oesterreicher, A., Roth, M., Hennen, D., Mostegel, F., Edler, M., Kappaun, S. & Grießer, T., 2016, In: European polymer journal. 88, 3, p. 393 - 402 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  264. Published

    Mettallized and Magnetic Polymers

    Fink, J., 2016, Hoboken: Wiley-VCH .

    Research output: Book/Report › Book › Research

  265. Published

    Mica/Epoxy Composites in the Electrical Industry: Applications, Composits for Insulations, and Investigations on Failure Mechanisms for Prospective Optimizations

    Kern, W., Andraschek, N., Wanner, A. J., Ebner, C. & Rieß, G., 2016, In: Polymers / Molecular Diversity Preservation International. 8, 5, p. 201

    Research output: Contribution to journal › Article › Research › peer-review

  266. Published

    Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

    Yutao Yan 1, Sabine Herzele 2, Arunjunai Raj Mahendran 2, Matthias Edler 3, Thomas Griesser 3, Bodo Saake 4, Jianzhang Li 1,* and Wolfgang Gindl-Altmutter 5,*, 2016, In: Polymers / Molecular Diversity Preservation International. 8, 255

    Research output: Contribution to journal › Article › Research › peer-review

  267. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  268. Published

    Polyvinylalkohol und Poly(vinylalkohol-co-vinylamin) als Barrierematerialien zur Optimierung der Permeationseigenschaften von Polymerverbunden

    Kramer, R., 2016

    Research output: Thesis › Doctoral Thesis

  269. Published

    Properties of Polymer Composites Used in High-Voltage Applications

    Plesa, G.-I., Noţingher, P., Schlögl, S., Sumereder, C. & Muhr, M., 2016, In: Polymers / Molecular Diversity Preservation International. 2016, 8

    Research output: Contribution to journal › Article › Research › peer-review

  270. Published

    Surface Functionalization of Natural Rubber by UV‐Induced Thiol‐ene Chemistry

    Manhart, J. C., Kramer, R., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2016, In: Macromolecular Symposia. 2016, 365

    Research output: Contribution to journal › Article › Research › peer-review

  271. Published

    Thermosets from Renewable Resources - Fundamentals, Preparation, and Properties

    Mahendran, A. R. & Aust, N., 2016, Advances in Polymer Materials and Technology. Srinivasan, A. & Bandyopadhyay, S. (eds.). p. 553-571

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  272. Published

    Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, In: Advanced Engineering Materials. 2016, 19, 19.

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  274. Published

    Thiol-yne Derived Resins for 3D Printing of Biocompatible Structures

    Oesterreicher, A., 2016

    Research output: Thesis › Doctoral Thesis

  275. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  276. Published

    Untersuchung und Optimierung der Barriereeigenschaften von Polyolefinen gegen die Permeation von kurzkettigen Kohlenwasserstoffen

    Berger, K., 2016

    Research output: Thesis › Doctoral Thesis

  277. Published

    Versatz zur Herstellung eines Grünkörpers zur Herstellung eines feuerfesten kohlenstoffgebundenen Erzeugnisses, Verfahren zur Herstellung eines solchen Grünkörpers sowie ein hierdurch hergestellter Grünkörper

    Puchleitner, R. (Inventor), Kern, W. (Inventor), Rieß, G. (Inventor), Deutsch, G. (Inventor), Heid, S. (Inventor), Michelitsch, A. (Inventor) & Köhler, J. (Inventor), 2016, Patent No. EP 3 093 305 A1

    Research output: Patent

  278. Published

    Vinylcarbonates as low-toxic monomers for digital ink-jet inks: Promising alternatives to acrylate based systems

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2016, In: Progress in organic coatings.

    Research output: Contribution to journal › Article › Research › peer-review

  279. Published

    Vorrichtung zum elektrischen Verbinden von Komponenten mit einem rissminimierenden Haftvermittler und Herstellungsverfahren dafür

    Nothdurft, P. (Inventor), Feldbacher, S. (Inventor), Kern, W. (Inventor) & Steinberger, A. (Inventor), 2016

    Research output: Patent

  280. Published

    X-ray Curing of Organic Bonded High Temperature Resistant Ceramics

    Puchleitner, R., 2016

    Research output: Thesis › Doctoral Thesis

  281. 2015
  282. Published

    From Photosensitive Polymers for Advanced Applications to High-performance Photopolymers

    Grießer, T., 10 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  283. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs + 4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S.a, Kreimer, M.a, Griesser, T.bc, Oesterreicher, A.c, Moser, A.d, Kern, W.ab, Schlögl, S.a, 2 Dec 2015, In: Polymer. Volume 80, p. Pages 76-87

    Research output: Contribution to journal › Article › Research › peer-review

  284. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  285. Published

    Verfahren zur Herstellung eines epoxidbasierten Duromers und damit hergestelltes Duromer

    Griesser, T. T. (Inventor), Kern, W. M. T. (Inventor), Radl, S. (Inventor) & Schlögl, S. T. (Inventor), 15 Nov 2015, IPC No. C08G 59/ 40 A I, Patent No. AT515711, Priority date 23 Apr 2014, Priority No. AT20140050295

    Research output: Patent

  286. Published

    Microwave-Assisted Syntheses in Recyclable Ionic Liquids: Photoresists Based on Renewable Resources

    Petit, C.a, Luef, K.P.bc, Edler, M.d, Griesser, T.d, Kremsner, J.M.e, Stadler, A.e, Grassl, B.a, Reynaud, S.a , Wiesbrock, F.b, Edler, M. & Wiesbrock, F., 1 Oct 2015, In: ChemSusChem. Volume 8, Issue 20 , p. Pages 3401-3404

    Research output: Contribution to journal › Article › Research › peer-review

  287. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  288. Published

    Silicon-based mercaptans: High-performance monomers for thiol-ene photopolymerization

    Roth, M., Oesterreicher, A., Mostegel, F., Moser, A., Pinter, G., Edler, M., Piock, R. & Grießer, T., 17 Aug 2015, In: Journal of polymer science : A, Polymer chemistry. 54, 3, p. 418-424 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Photocleavable epoxy based materials

    Radl, S. V., Kreimer, M., Manhart, J., Grießer, T., Moser, A., Pinter, G., Kalinka, G., Kern, W. & Schlögl, S., 15 Jun 2015, In: Polymer. 2015, Vol.69, July, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  290. Published

    Erratum: Inhomogeneities and local chain stretching in partially swollen networks (Soft Matter (2013) 9 (6943-6954))

    Chassé, W., Schlögl, S., Riess, G. & Saalwächter, K., 7 Jun 2015, In: Soft Matter. 11, 21, p. 4337-4338 2 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  291. Published

    Comparative investigation of different silane surface functionalizations of fullerene-like WS2

    Haba, D., Griesser, T., Müller, U. & Brunner, A. J., 6 May 2015, In: Journal of materials science. 50, 15, p. 5125-5135 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  292. Published

    New water-based sol-gel synthesis routes for LaNi0.6Fe0.4O3-δ thin films

    Perz, M.a , Bucher, E.a, Sitte, W.a, Griesser, T.b , 1 May 2015, In: Solid State Ionics. Volume 273, p. Pages 30-34 Article number 13512.

    Research output: Contribution to journal › Article › Research › peer-review

  293. Published

    Erratum: Entanglement effects in elastomers: Macroscopic vs microscopic properties (Macromolecules (2014) 47:9 (2759-2773) DOI: 10.1021/ma4026064)

    Schlögl, S., Trutschel, M. L., Chassé, W., Riess, G. & Saalwächter, K., 28 Apr 2015, In: Macromolecules. 48, 8, p. 2855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  294. Published

    ROHR, INSBESONDERE FERNWÄRMEROHR

    Schlögl, S. (Inventor), Riess, G. (Inventor) & Kramer, R. (Inventor), 23 Apr 2015, IPC No. F16L 59/ 14 A I, Patent No. WO2015054713, Priority date 14 Oct 2013, Priority No. AT20130050662

    Research output: Patent

  295. Published

    New elastomers based on polyurethanes

    Ziegler, W., Winter, J. (Co-editor), Rieß, G., Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 9 Mar 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  296. Published

    Cellulose-Derivative-Based Gate Dielectric for High-Performance Organic Complementary Inverters

    Petritz, A., Wolfberger, A., Fian, A., Griesser, T., Irimia-Vladu, M. & Stadlober, B., 1 Jan 2015, In: Advanced materials. 27, 46, p. 7645-7656 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  297. Published

    Dielectrics: Cellulose-Derivative-Based Gate Dielectric for High-Performance Organic Complementary Inverters (Adv. Mater. 46/2015)

    Petritz, A., Wolfberger, A., Fian, A., Griesser, T., Irimia-Vladu, M. & Stadlober, B., 1 Jan 2015, In: Advanced materials. 27, 46, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  298. Published

    Cationic Frontal Polymerization for the Production of Electrical Insulation Materials

    D., B., P., K., Kern, W. & Liska, R., 2015, Danube Vltava Sava Polymer Meeting. p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  299. Published

    Cellulose based thin films as a platform for drug release studies to mimick wound dressing materials

    Maver, T.a, Maver, U.b , Mostegel, F.c, Griesser, T.c, Spirk, S.ad , Smrke, D.M.e, Stana-Kleinschek, K.a , 2015, In: Cellulose. Volume 22, Issue 1 , p. Pages 749-761

    Research output: Contribution to journal › Article › Research › peer-review

  300. Published

    Chemical functionalization of composite surfaces for improved structural bonded repairs

    Jölly, I., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. & Schlögl, S., 2015, In: Composites Part B: Engineering. 69, p. 296-303

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    CHEMICAL/PHYSICAL PRE-PROCESSING OF NANOCLAY PARTICLES

    Rieß, G. & Schauberger, J., 2015, POLYMER NANOCLAY COMPOSITES.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  302. Published

    curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems

    Moser, A., Feuchter, M., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Design of Stimuli Triggered Smart Composite Materials with Enhanced Recyclability and Selfhealing Properties

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  304. Published

    Digital Inkjet Inks Based on Biocompatible Vinylcarbonates: An Alternative to Acrylates

    Mostegel, F., Roth, M., Gassner, M., Oesterreicher, A., Piock, R., Edler, M. & Grießer, T., 2015.

    Research output: Contribution to conference › Poster › Research

  305. Published

    Entwicklung funktioneller Polymerblends mit maßgeschneiderten Barriereeigenschaften

    Schmidt, M., 2015

    Research output: Thesis › Master's Thesis

  306. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  307. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Exploring thiol-based chemistry for photopolymerizable inkjet inks and for advanced surface functionalization

    Mostegel, F., 2015

    Research output: Thesis › Doctoral Thesis

  309. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  310. Published

    Flexible Epoxy-Based Composites with Enhanced Delamination Resistance

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2015, In: Polymer Composites. 36, p. 2238-2247

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  312. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  313. Published

    High voltage insulations with enhanced delamination resistance

    Schlögl, S. & Lenko, D., 2015, In: Rubber, fibres, plastics international. p. 260-262 4.

    Research output: Contribution to journal › Article › Research

  314. Published

    Hochspannungsisolation mit verbesserter Delaminationsbeständigkeit

    Schlögl, S. & Lenko, D., 2015, In: GAK (Gummi Fasern Kunststoffe). p. 108-110 2.

    Research output: Contribution to journal › Article › Research

  315. Published

    Investigation of the Rubber-Brass Adhesion Layer Using the Olefin-Metathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., M., M., Holzner, A. & Trimmel, G., 2015, In: Rubber chemistry and technology. 88, p. 219-233

    Research output: Contribution to journal › Article › Research › peer-review

  316. Published

    Investigations on the flame retardant and crosslinking properties of polypropylene compounds grafted with nitrogen and phosphorus containing monomers

    Spörk, M., 2015

    Research output: Thesis › Master's Thesis

  317. Published

    Irreversible and reversible crosslinking of carboxylated acrylonitrile butadiene rubber

    Fleischmann, D. D., 2015

    Research output: Thesis › Master's Thesis

  318. Published

    Low Migration Photoinitiators for Thiol-ene and Water Based Systems

    Roth, M., 2015

    Research output: Thesis › Doctoral Thesis

  319. Published

    Marine, Waterborne, and Water-Resistant Polymers: Chemistry and Applications

    Fink, J., 2015, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  320. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  321. Published

    New strategies towards reversible and mendable epoxy based materials employing [4πs+4πs] photocycloaddition and thermal cycloreversion of pendant anthracene groups

    Radl, S., Kreimer, M., Grießer, T., Oesterreicher, A., Moser, A., Kern, W. & Schlögl, S., 2015, In: Polymer. p. 76-87 80.

    Research output: Contribution to journal › Article › Research › peer-review

  322. Published

    Olefin-Metathesis Method: A useful Fool for the Investigation of Rubber-Brass Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  323. Published

    Olefin-Metathesis Method: A valuable Tool for the Investigation of Rubber-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Poster › Research

  324. Published

    Olefin-Metathesis Method h A practical Tool for the Investigation of Elastomer-Metal Adhesion Interfaces

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  325. Published

    Photochemical Patterning of Green Fluorescent Protein on Molecular Layers

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S., Edler, M., Cartron, M. L., Leggett, G. J. & Grießer, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  326. Published

    Photo-patterned natural rubber surfaces with tunable tribological properties

    Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015, In: European polymer journal. p. 236-246

    Research output: Contribution to journal › Article › Research › peer-review

  327. Published

    Radical induced Cationic Frontal Polymerization

    D., B., P., K., Kern, W. & Liska, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  328. Published

    Schaltbare intelligente Polymere für Selbstheilungs- und Recyclingstrategien

    Radl, S., 2015

    Research output: Thesis › Doctoral Thesis

  329. Published

    Strategies for the surface functionalization of (nano)-particles and their application in (nano)-composites

    Kern, W., Wanner, A. J., Rieß, G., Andraschek, N., Brasch, M., Moser, A., Bergmann, I., Ladstätter, W., Stecher, H., Zenz, C., Wallner, A., Fischer, K. & Ochs, C., 2015.

    Research output: Contribution to conference › Presentation › Research

  330. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  331. Published

    Thermo-mechanical and dielectric properties of epoxy nanocomposites containing inorganic nanoparticles

    Kern, W., Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R. & Smit, J. J., 2015.

    Research output: Contribution to conference › Poster › Research

  332. Published

    UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlles Anisotropic Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Lenko, D., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  333. Published

    Versatile thiol-based reactions for micrometer- and nanometer-scale photopatterning of polymers and biomolecules

    Mostegel, F., Ducker, R. E., Rieger, P., El Zubir, O., Xia, S., Radl, S. V., Edler, M., Cartron, M. L., Hunter, C. N., Leggett, G. J. & Grießer, T., 2015, In: Journal of Materials Chemistry B. 3, 21, p. 4431–4438

    Research output: Contribution to journal › Article › Research › peer-review

  334. Published

    Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids

    Fink, J., 2015, Burlington, MA: Elsevier.

    Research output: Book/Report › Book › Research

  335. 2014
  336. Published

    Photolithographic patterning of cellulose: a versatile dual-tone photoresist for advanced applications

    Wolfberger, A., Petritz, A., Fian, A., Herka, J., Schmidt, V., Stadlober, B., Kargl, R., Spirk, S. & Grießer, T., 16 Oct 2014, In: Cellulose. Volume 22, Issue 1, p. 717-727 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  337. Published

    Photoregeneration of Trimethylsilyl Cellulose as a Tool for Microstructuring Ultrathin Cellulose Supports

    Wolfberger, A., Kargl, R., Grießer, T. & Spirk, S., Oct 2014, In: Molecules. 19, 10, p. 16266-16273

    Research output: Contribution to journal › Article › Research › peer-review

  338. Published

    Elastomerprodukt mit kovalent gebundenen Partikel

    Holzner, A. (Inventor), Kern, W. (Inventor), Lenko, D. (Inventor), Manhart, J. C. (Inventor), Schaller, R. (Inventor) & Schloegl, S. (Inventor), 16 Apr 2014, IPC No. C08K 9/ 08 A I, Patent No. EP2719710, Priority date 9 Oct 2012, Priority No. AT20120001087

    Research output: Patent

  339. Published

    Elastomerprodukt mit kovalent gebundenen Partikeln

    Schlögl, S. (Inventor), Lenko, D. (Inventor), Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Manhart, J. (Inventor), 16 Apr 2014, Patent No. EP20130187847

    Research output: Patent

  340. Published

    Verfahren zur Modifizierung der Oberfläche eines Elastomerproduktes

    Schlögl, S. (Inventor), Holzner, A. (Inventor), Lenko, D. (Inventor), Schaller, R. (Inventor), Manhart, J. (Inventor) & Kern, W. (Inventor), 16 Apr 2014, Patent No. EP20130187837

    Research output: Patent

  341. Published

    3D Optical Waveguides Produced by Two Photon Photopolymerisation of a Flexible Silanol Terminated Polysiloxane Containing Acrylate Functional Groups

    Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R. & Kern, W., 1 Mar 2014, In: Optical Materials Express. 4, 3, p. 486-498 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  342. Published

    Method of Manufacturing an Electrically-Conductive or Semiconductive Structure and Electronic Device Comprising the Same

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  343. Published

    Migrationsarme Photoinitiatoren für Thiol-En / Thiol-In Systeme

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  344. Published

    Multidimensionally photopatterned substates on the basis of monosaccaride derivatives, their oligomers and their polymers and a method of production there of

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  345. Published

    Resin composition suitable for printing and printing mehtod utilizing the same, Patent application

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  346. Published

    Verfahren zur Herstellung eines epoxidbasierten Harzes und damit hergestelltes Harz

    Grießer, T. (Inventor), 1 Jan 2014

    Research output: Patent

  347. Published

    Adjustment of Organic Electronic Device Performance by Means of UV-Light

    Edler, M., Grießer, T., Teichert, C., Zojer, E. & Marchl, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  348. Published

    Cellulose based thin films as a platform for drug release studies to minick wound dressing materials

    Maver, T., Maver, U., Mostegel, F., Grießer, T., Spirk, S., Smrke, D. M. & Stana-Kleinschek, K., 2014, In: Cellulose.

    Research output: Contribution to journal › Article › Research › peer-review

  349. Published

    Charakterisierung und Evaluierung von Schlüsselparametern für die Herstellung defektfreier Isolationsverbundmaterialien

    Weingrill, H., 2014

    Research output: Thesis › Master's Thesis

  350. Published

    Christian Doppler Laboratory for Functional and Polymer Based Ink-Jet Inks

    Grießer, T. & Edler, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 50-54

    Research output: Contribution to journal › Article › Research › peer-review

  351. Published

    Dissolution Testing of Hardly Soluble Materials by Surface Sensitive Techniques: Clotrimazole from an Insoluble Matrix

    Ehmann, H. M. A., Winter, S., Grießer, T., Keimel, R., Schrank, S., Zimmer, A. & Werzer, O., 2014, In: Pharmaceutical Research. p. 2708-2708

    Research output: Contribution to journal › Article › Research › peer-review

  352. Published

    Entanglement Effects in Elastomers: Macroscopic vs Microscopic Properties

    Schlögl, S., Rieß, G., Chassé, W., Saalwächter, K. & Trutschel, M.-L., 2014, In: Macromolecules. 47, p. 2759-2773

    Research output: Contribution to journal › Article › Research › peer-review

  353. Published

    Epoxidharze und anorganische Füllstoffe mit photochemisch steuerbaren Eigenschaften: Neue Strategien für die Herstellung von Verbundwerkstoffen mit verbesserter Rezyklierbarkeit

    Kreimer, M., 2014

    Research output: Thesis › Master's Thesis

  354. Published

    Epoxy-Based Composites with Modified Elastomeric Damping Layers: New Approaches for the Manufacture of High Voltage Insulations with Improved Delamination Resistance

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  355. Published

    Evaluation of Selected Characterization Techniques to Determine Failure Mechanisms of Epoxy-Based Composite Materials

    Kreimer, M., Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. & Kern, W., 2014, 33nd Annual International Conference on Composites/Nanoenginering. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  356. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  357. Published

    Härtung von Composit-Werkstoffen durch strahlungsbasierte Prozesse

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Hocheffiziente Verbundwerkstoffe. p. 115-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  358. Published

    High Performance Polymers, 2nd Edition

    Fink, J., 2014

    Research output: Book/Report › Book › Research

  359. Published

    Increase of the Thermal Stability of Polymers based on Renewable Resources

    Laske, S., Ziegler, W. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  360. Published

    Influence of TiOx and Ti cathode interlayers on the performance and stability of hybrid solar cells

    Dunst, S., Rath, T., Moscher, S., Troi, L., Edler, M., Grießer, T. & Trimmel, G., 2014, In: Solar energy materials and solar cells. 130, p. 217-224

    Research output: Contribution to journal › Article › Research › peer-review

  361. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  362. Published

    Nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, ESPS 2014. p. IL14-IL14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  363. Published

    New approaches towards the investigation on defects and failure mechanisms of insulating composites used in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J. & Kern, W., 2014, In: Composites Part B: Engineering. 58, p. 83-90

    Research output: Contribution to journal › Article › Research › peer-review

  364. Published

    New Epoxy-Based Resins and Functional Inorganic Fillers with Tunable Mechanical Properties for the Preparation of Composite Materials with Enhanced Recyclability

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  365. Published

    Photochemical Patterning of Proteins in Thiol-terminated Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  366. Published

    Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups

    Radl, S. V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W. & Grießer, T., 2014, In: European polymer journal. 52, p. 98-104

    Research output: Contribution to journal › Article › Research › peer-review

  367. Published

    Photo-Induced Polymer Brush Growth on Thiol Terminated Self-Assembled Monolayers

    Mostegel, F., Rieger, P., Edler, M. & Grießer, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  368. Published

    Photoreactive Materials for Applications in Organic Electronics

    Wolfberger, A., 2014, 125 p.

    Research output: Thesis › Doctoral Thesis

  369. Published

    Photoreversible Crosslinking of Elastomer Materials

    Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Grießer, T., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, Photoreversible Crosslinking of Elastomer Materials. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  370. Published

    Photosensitive polymers for optical devices and organic electronics

    Grießer, T., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  371. Published

    Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices

    Schlögl, S., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Rieß, G., Kern, W. & Saalwächter, K., 2014, In: Polymer. 55, p. 5584-5595

    Research output: Contribution to journal › Article › Research › peer-review

  372. Published

    Physical properteis of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 227-240

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  373. Published

    Polymerization and manufacture of polyoxymethylene

    Fink, J., 2014, Polyoxymethylene handbook: Structure, properties, applications and its nanocomposites. p. 53-106

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  374. Published

    Preparation of PDMS ultrathin films and patterned surface modification with cellulose

    Bracic, M., Mohan, T., Kargl, R., Grießer, T., Doliska, A., Ribitsch, V., Stana-Kleinschek, K. & Fras-Zemljica, L., 2014, In: RSC Advances. 4, 23, p. 11955-11961

    Research output: Contribution to journal › Article › Research › peer-review

  375. Published

    Silica nanoparticles bearing a photoreactive shell: interactions with polymer matrices and polymer surfaces

    Kern, W., Muhr, N., Rieß, G. & Schauberger, J., 2014, Symposium Polymerblends & Nanocomposites: Programme & Kurzreferate. Radusch, H.-J. (ed.). Halle (Saale), p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  376. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  377. Published

    Smart composite materials bearing photoswitchable crosslinks

    Radl, S. V., Grießer, T., Kreimer, M., Oesterreicher, A., Kern, W. & Schlögl, S., 2014, 3rd European Symposium of Photopolymer Science. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  378. Published

    Structured and Functional Elastomer-Based Composites with Tailored Friction Properties

    Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 2014, 22nd Annual International Conference of Composites/Nanoengineering (ICCE-22). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  379. Published

    Synthesis, characterization, and properties of isocyanate-free urethane coatings from renewable resources

    Aust, N., 2014, In: Journal of coatings technology research (JCTR). 11, p. 329-339

    Research output: Contribution to journal › Article › Research › peer-review

  380. Published

    The Chemistry of Bio-based Polymers

    Fink, J., 2014

    Research output: Book/Report › Book › Research

  381. Published

    UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2014, UV assisted microcellular foaming - A new approach towards the formation of 3D structures in offset printing techniques. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  382. Published

    UV-crosslinking of poly(vinyl alcohol) using cation exchanged montmorillonite

    Rieß, G., Schauberger, J. & Kern, W., 2014, 15. Problemseminar Polymerblends und Nanocomposites. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  383. 2013
  384. Published

    Photoinitiator

    Roth, M. (Inventor), Mostegel, F. (Inventor), Grießer, T. (Inventor), Edler, M. (Inventor), Oesterreicher, A. (Inventor), Gassner, M. (Inventor) & Billiani, J. (Inventor), 9 Sept 2013

    Research output: Patent

  385. Published

    Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzyl ester groups

    Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W. & Griesser, T., 7 Jul 2013, In: Journal of Materials Chemistry C. 1, 25, p. 3931-3938 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  386. Published

    Accelerator free crosslinking of XNBR-latex using UV techniques

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, Conference Proceedings: Latex and Synthetic Polymer Dispersions 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  387. Published

    Advanced characterization techniques to determine tribological end properties of elastomeric products in contract with human skin forgoing living tissue

    Manhart, J., Lenko, D., Hausberger, A., Schloegl, S., Holzner, A., Schaller, R. & Kern, W., 2013, Book of Abstracts. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  388. Published

    ADVANCED UV-CURABLE RESINS FOR ADHESION APPLICATION

    Kramer, R., Ling, Y., Puchleitner, R., Rieß, G. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  389. Published

    Alternative methods for the crosslinking of poly(vinyl alcohol) by the use of functionalised inorganic particles - A water-based approach towards environmentally benign coating materials

    Schauberger, J. G., 2013, 219 p.

    Research output: Thesis › Doctoral Thesis

  390. Published

    Anchoring of alkylsilanes and alkylphosphonic dericates on copper surfaces

    Nothdurft, P., Feldbacher, S. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  391. Published

    Bio-Based Resins and Green Composites from Renewable Resources

    Mahendran, A.-R., 2013, 184 p.

    Research output: Thesis › Doctoral Thesis

  392. Published

    Cellulose as biodegradable high-k dielectric layer in organic complementary inverters

    Petritz, A., Wolfberger, A., Fian, A., Irimia-Vladu, M., Haase, A., Gold, H., Rothländer, T., Grießer, T. & Stadlober, B., 2013, In: Applied physics letters. 103, p. 153303-153303

    Research output: Contribution to journal › Article › Research › peer-review

  393. Published

    Cross-linking of ROMP derived polymers using the two-photon induced thiol-ene reaction: towards the fabrication of 3D-polymer microstructures

    Grießer, T., Wolfberger, A., Daschiel, U., Schmidt, V., Fian, A., Jerrar, A., Teichert, C. & Kern, W., 2013, In: Polymer Chemistry. 4, p. 1708-1714

    Research output: Contribution to journal › Article › Research › peer-review

  394. Published

    Development and characterization of optoelectronic circuit boards produced by two-photon polymerization using a polysiloxane containing acrylate functional groups

    Woods, R., Feldbacher, S., Langer, G., Satzinger, V., Schmid, G., Leeb, W., Kern, W. & Zidar, D., 2013, In: Applied Optics. 52, p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  395. Published

    Direct extreme UV-lithographic conversion of metal xanthates into nanostructured metal sulfide layers for hybrid photovoltaics

    Rath, T., Padeste, C., Vockenhuber, M., Fradler, C., Edler, M., Reichmann, A., Letofsky-Papst, I., Hofer, F., Ekinci, Y. & Grießer, T., 2013, In: Journal of materials chemistry. 37, p. 11135-11140

    Research output: Contribution to journal › Article › Research › peer-review

  396. Published

    Dual cross-linking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Lenko, D., Schloegl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  397. Published

    Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

    Schlögl, S., Kern, W., Holzner, A., Schaller, R. & Lenko, D., 2013, In: Journal of Applied Polymer Science. 129, p. 2735-2743

    Research output: Contribution to journal › Article › Research › peer-review

  398. Published

    High performance p-type organic thin film transistors with an intrinsically photopatternable, ultrathin polymer dielectric layer

    Petritz, A., Wolfberger, A., Fian, A., Krenn, J. R., Grießer, T. & Stadlober, B., 2013, In: Organic electronics. 14, p. 3070-3082

    Research output: Contribution to journal › Article › Research › peer-review

  399. Published

    Hydraulic Fracturing Chemicals and Fluids Technology

    Fink, J., 2013

    Research output: Book/Report › Book › Research

  400. Published

    Inhomogeneities and local chain stretching in partially swollen network

    Schlögl, S., Rieß, G., Saalwächter, K. & Chassé, W., 2013, In: Soft Matter. 9, p. 6943-6954

    Research output: Contribution to journal › Article › Research › peer-review

  401. Published

    Inhomogeneities and local chain stretching in partially swollen networks

    Chasse, W., Schlögl, S., Rieß, G. & Saalwächter, K., 2013, In: Soft Matter. 9, p. 6943-6954

    Research output: Contribution to journal › Article › Research › peer-review

  402. Published

    Interactions of a cationic cellulose dervative with an ultrathin cellulose support

    Mohan, T., Zarth, C. S. P., Doliska, A., Kargl, R., Grießer, T., Spirk, S., Heinze, T. & Stana-Kleinschek, K., 2013, In: Carbohydrate Polymers. 92, p. 1046-1053

    Research output: Contribution to journal › Article › Research › peer-review

  403. Published

    Investigation of the Rubber-Brass-Interface ursing the Olefin-Matathesis Method

    Leimgruber, S., Kern, W., Hochenauer, R., Holzner, A. & Trimmel, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  404. Published

    Isocyanate Free Urethane Coatings from Renewable Resources

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  405. Published

    Lichtinduzierte Kopplungsreaktionen zwischen Nanopartikeln und Polymeroberflächen

    Muhr, N., 2013

    Research output: Thesis › Doctoral Thesis

  406. Published

    Microcellular foaming with UV light – new strategies for the formation of 3D structures in offset printing techniques

    Schlögl, S., Reischl, M., Ribitsch, V. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  407. Published

    Nanoparticles bearing a photoreactive shell: interaction with polymers and polymer surfaces

    Kern, W., Muhr, N. & Puchleitner, R., 2013, In: European polymer journal. 49, p. 3114-3124

    Research output: Contribution to journal › Article › Research › peer-review

  408. Published

    Neue Verfahren zur Oberflächenmodifizierung von Elastomeren für Anwendungen in der Medizin- und Elektrotechnik

    Lenko, D., 2013

    Research output: Thesis › Doctoral Thesis

  409. Published

    New Functional Polynorbornenes Bearing Anthracene Groups for Reversible Crosslinked Materials

    Radl, S. V., Roth, M., Hirschmann, B., Grießer, T. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  410. Published

    Oberflächenfunktionalisierte Elastomere in Epoxidharzverbunden

    Lenko, D., Schlögl, S., Bichler, S., Ladstätter, W., Ramsauer, F. & Kern, W., 2013, Tagungsband des 22. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  411. Published

    ORGANO-MODIFIED LAYERED DOUBLE HYDROXIDE PARTICLES CARRYING PHOTOACTIVE INTERCALATES

    Puchleitner, R., Rieß, G. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  412. Published

    Photochemical cross-linking of polymer materials via functional inorganic particles

    Manhart, J., Schloegl, S., Schauberger, J., Schaller, R., Holzner, A. & Kern, W., 2013, The Proceedings of the Austrian-Slovenian Polymer Meeting 2013s. p. 118-210

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  413. Published

    Photochemical cross-linking of poly(viny alcohol): New strategies towards water-developable photoresists

    Manhart, J., Schloegl, S., Schauberger, J. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  414. Published

    Photochemical cross-linking of poly(vinyl alcohol): New strategies towards water-developable photoresists

    Manhart, J. C., Schlögl, S., Schauberger, J. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research

  415. Published

    Photochemical cross-linking of XNBR-latex using the thiol-ene reaction - a new approach for the manufacture of low allergenic latex gloves

    Lenko, D., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2013, The proceedings of the Austrian - Slovenian Polymer Meeting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  416. Published

    Photolithographic Patterning of Polynorbornenes: Towards Applications in Optics and Organic Electronics

    Wolfberger, A., Petritz, A., Fian, A., Stadlober, B., Schmidt, V., Teichert, C. & Grießer, T., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  417. Published

    Polypropylene/Polyethylene Blends as Models for High-Impact Propylene-Ethylene Copolymers, Part 2: Relation Between Composition and Mechanical Performance

    Kock, C., Aust, N., Grein, C. & Gahleitner, M., 2013, In: Journal of Applied Polymer Science. 130, p. 287-296

    Research output: Contribution to journal › Article › Research › peer-review

  418. Published

    Preparation of UV reactive montmorillonite and characterisation of its nanocomposites with poly(vinyl alcohol)

    Schauberger, J., Rieß, G. & Kern, W., 2013, In: Journal of Applied Polymer Science. 130, p. 665-672

    Research output: Contribution to journal › Article › Research › peer-review

  419. Published

    Processing and Characterization of Natural Fibre Reinforced Composites using Lignin Phenolic Binder

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Kandelbauer, A., 2013, In: Polymers & Polymer Composites (Polymers and polymer composites). 21, p. 199-206

    Research output: Contribution to journal › Article › Research › peer-review

  420. Published

    Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers

    Fink, J., 2013, Elsevier.

    Research output: Book/Report › Book › Research

  421. Published

    Reaktive Funktionalisierung von Elastomeroberflächen

    Schlögl, S., Lenko, D., Manhart, J. C., Schaller, R., Holzner, A. & Kern, W., 2013, Tagungsband des 22. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  422. Published

    Reversible Cross-linking of Anthracene Functionalized Polynorbornenes

    Radl, S. V., Hirschmann, B., Grießer, T. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  423. Published

    SILICA NANOPARTICLES BEARING A PHOTOREACTIVE SHELL FOR CROSLINKING OF POLYMERS AND IMMOBILIZATON OF POLYMER SURFACES

    Rieß, G., Muhr, N., Schauberger, J. & Kern, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  424. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2013, Proceedings of ECCM 15. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  425. Published

    Thermal decomposition kinetics of natural fiber reinforced green composites

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Vijayakumar, C. T., 2013, In: ScienceJet. 2, 34, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  426. Published

    Thermal Degradation Studies On Non-woven Flex and Hemp Fiber Mat Reinforced Green-Composites

    Mahendran, A. R., Aust, N., Wuzella, G. & Müller, U., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  427. Published

    Ti and TiOx as cathode interlayer for efficient and stable nanocomposite solar cells

    Dunst, S., Moscher, S., Rath, T., Grießer, T. & Trimmel, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  428. Published

    Tuning organic electronics via photoreactive thin films

    Edler, M., Grießer, T., Trimmel, G. & Kern, W., 2013, Small organic molecules on surfaces - fundamentals and applications. p. 141-167

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  429. Published

    Tuning Organic Electronics via Photoreactive Thin Organic Films

    Edler, M., 2013, Small Organic Molecules on Surfaces. p. 141-167

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  430. Published

    UV crosslinking of Fe+3 doped poly(vinyl alcohol) - characterization of optical properties and swelling behaviour

    Schauberger, J., Rieß, G. & Kern, W., 2013, In: Journal of Applied Polymer Science. 129, p. 3623-3628

    Research output: Contribution to journal › Article › Research › peer-review

  431. Published

    Vergleichende GPC-Messungen an 2 Polyetherimiden

    Aust, N., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  432. Published

    Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl-and orthonitrobenzyl ester groups

    Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W. & Grießer, T., 2013, In: Journal of materials chemistry. 25, p. 3931-3938

    Research output: Contribution to journal › Article › Research › peer-review

  433. Published

    Weiterentwicklung und Implementierung eines Isolationssystems der Temperaturklasse H für Hochspannungs-Anwendungen

    Führer, R., 2013, 205 p.

    Research output: Thesis › Doctoral Thesis

  434. 2012
  435. Published

    VERFAHREN ZUR HERSTELLUNG EINES VERNETZTEN ELASTOMERS

    Holzner, A. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor), Schloegl, S. (Inventor) & Schloegl, S. (Inventor), 25 Jan 2012, IPC No. C08J 5/ 02 A I, Patent No. EP2408849, Priority date 17 Mar 2010, Priority No. WO2010AT00081

    Research output: Patent

  436. Published

    Accelerator free cross-linking of XNBR-Latex using UV techniques

    Lenko, D., Schloegl, S., Schaller, R., Holzner, A. & Kern, W., 2012, Latex and Synthetic Polymer Dispersions 2012 Conference Proceedings. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  437. Published

    Bio-Based Non-Isocynate Urethane Derived from Plant Oil

    Mahendran, A. R., Aust, N., Wuzella, G., Müller, U. & Kandelbauer, A., 2012, In: Journal of polymers and the environment. 20, p. 926-931

    Research output: Contribution to journal › Article › Research › peer-review

  438. Published

    Characteristics of the photochemical prevulcanization in a falling film photoreactor

    Schlögl, S., Kern, W., Temel, A., Schaller, R. & Holzner, A., 2012, In: Journal of Applied Polymer Science. p. 3478-3486

    Research output: Contribution to journal › Article › Research › peer-review

  439. Published

    Characterization of Non-Isocyanate Urethane Coatings derived from Plant Oil

    Mahendran, A. R., Wuzella, G., Aust, N., Müller, U. & Kandelbauer, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  440. Published

    Chlorella algae – organic filler for tailor-made properties of polyolefins

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A10-1-A10-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  441. Published

    Contributions to the Characterization of Chlorinated Polyisoprene Surfaces

    Lenko, D., Schloegl, S., Kramer, R., Kern, W., Schaller, R. & Holzner, A., 2012, In: Macromolecular Symposia. 311, p. 9-17

    Research output: Contribution to journal › Article › Research › peer-review

  442. Published

    Copper zinc tin sulfide layers prepared from solution processable metal dithiocarbamate precursors

    Edler, M., Rath, T., Schenk, A., Fischereder, A., Haas, W., Chernev, B., Kunert, B., Hofer, F., Resel, R. & Trimmel, G., 2012, In: Materials chemistry and physics. 136, 2-3, p. 582-588

    Research output: Contribution to journal › Article › Research › peer-review

  443. Published

    Cross-linking of a ROMP Derived Polymer Using the Thiol-Ene Reaction: Towards the Fabrication of Polymer 2D- and 3D- Microstructures

    Grießer, T., Wolfberger, A., Daschiel, U., Schmidt, V., Jerrar, A., Teichert, C. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  444. Published

    Cross-linking of XNBR-latex via thiol-ene reaction

    Lenko, D., Schloegl, S., Kern, W., Schaller, R. & Holzner, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  445. Published

    Crystallization of pentacene thin films on polymeric dielectrics

    Moser, A., Flesch, H.-G., Marchl, M., Edler, M., Grießer, T., Außerlechner, S. J., Haase, A., Smilgies, D.-M., Jakabovic, J. & Resel, R., 2012, In: Synthetic Metals. 161, p. 2598-2602

    Research output: Contribution to journal › Article › Research › peer-review

  446. Published

    Development and characterisation of polymeric matrix materials used for applications in two-photon patterning of optical waveguides

    Woods, R. M., 2012, 211 p.

    Research output: Thesis › Doctoral Thesis

  447. Published

    Entwicklung neuer Methoden zur Funktionalisierung und Charakterisierung von Elastomeroberflächen

    Manhart, J. C., 2012, 82 p.

    Research output: Thesis › Master's Thesis

  448. Published

    From Molecular Structure to Performance of Polymeric Materials: Selected contributions from: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben, Austria, September 8 - 10, 2010

    Aust, N. (Editor), Fink, J. (Editor) & Kern, W. (Editor), 2012, Weinheim/Germany: Wiley-VCH . 125 p. (Macromolecular Symposia; vol. 311)

    Research output: Book/Report › Book › Research

  449. Published

    From Molecular Structure to Performance of Polymeric Materials

    Aust, N., Fink, J. & Kern, W., 2012, Wiley-VCH . 125 p.

    Research output: Book/Report › Anthology › Research

  450. Published

    Functional flexible organic-inorganic hybrid polymer for two photon patterning of optical waveguides

    Woods, R., Feldbacher, S. & Kern, W., 2012, In: Optical Materials. 34, p. 772-780

    Research output: Contribution to journal › Article › Research › peer-review

  451. Published

    Green chemicals in petroleum industries

    Fink, J., 2012, Progress in Mining and Oilfield Chemistry. p. 199-216

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  452. Published

    Hans Sachs zum 70. Geburtstag

    Fink, J., 2012, In: Mathematica Pannonica. 23, p. 165-169

    Research output: Contribution to journal › Article › Research › peer-review

  453. Published

    Improved curing of UV-curable resin formulations

    Kramer, R., Yue, L., Puchleitner, R., Rieß, G. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  454. Published

    Interactions of a cationic cellulose derivative with an ultrathin cellulose support

    Mohan, T., Zarth, C. S. P., Doliska, A., Kargl, R., Grießer, T., Spirk, S., Heinze, T. & Stana-Kleinschek, K., 2012, In: Carbohydrate Polymers. p. 1046-1053

    Research output: Contribution to journal › Article › Research › peer-review

  455. Published

    Investigation on failure mechanisms of electrical insulation in high voltage application

    Lenko, D., Schloegl, S., Kern, W., Bichler, S., Lemesch, G. & Ramsauer, F., 2012, In: VLK-News. 18, p. 22-23

    Research output: Contribution to journal › Article › Research › peer-review

  456. Published

    Materialien zur Herstellung von optischen Wellenleitern mittels Zweiphotoenlithograpie

    Feldbacher, S., Woods, R., Kern, W., Kupfmüller, J. & Liska, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  457. Published

    Modulation of Materials Properties of Thin Surface Layers by Means of UV-Light

    Edler, M., 2012, 154 p.

    Research output: Thesis › Doctoral Thesis

  458. Published

    Molmassenverteilung von Granulatmuster "Lexan LS 2"

    Aust, N., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  459. Published

    Novel silica nanoparticles with photoactive diazosulfonate groups

    Rieß, G., Schauberger, J., Koschell, K. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  460. Published

    Novel temperature dependent tensile test of freestanding copper thin film structures

    Smolka, M., Motz, C., Detzel, T., Robl, W., Grießer, T., Wimmer, A. C. & Dehm, G., 2012, In: Review of scientific instruments. Jun;(6), p. 064702/1-064702/9

    Research output: Contribution to journal › Article › Research › peer-review

  461. Published

    Oberflächenmodifizierung von Naturkautschuk-Latex: Optimierung der Oberflächeneigenschaften zur Herstellung von nicht allergenen medizinischen Handschuhen

    Kramer, R., 2012

    Research output: Thesis › Master's Thesis

  462. Published

    Organische Photovoltaik

    Kern, W., 2012, Kunststoffe - Einsatz in Solarthermie und Photovoltaik. p. 99-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  463. Published

    Patterned immobilisation of silicon dioxide nanoparticles on the surface of a photosensitive polymer

    Muhr, N., Kern, W. & Grießer, T., 2012, In: Thin solid films. 520, p. 1789-1793

    Research output: Contribution to journal › Article › Research › peer-review

  464. Published

    Patterned Immobilization of a Fluorescent Ru(II) Complex in Polymer Films Using the Photoreaction of Benzyl thiocyanate: Towards Color Emission Tuning of Electroluminescent Devices

    Köpplmayr, T., Cardinale, M., Rath, T., Trimmel, G., Rentenberger, S., Zojer, E., Kern, W. & Grießer, T., 2012, In: Macromolecular chemistry and physics. 213, p. 367-373

    Research output: Contribution to journal › Article › Research › peer-review

  465. Published

    Patterned Modulation of the Conductivity of Polyaniline by Means of Photolithography

    Grießer, T., Radl, S., Pavitschitz, A., Teichert, C., Edler, M., Köpplmayr, T., Rath, T., Trimmel, G., Schwabegger, G., Simbrunner, C., Sitter, H. & Kern, W., 2012, In: Chemistry of materials. p. 2922-2922

    Research output: Contribution to journal › Article › Research › peer-review

  466. Published

    Photochemical cross-linking of poly(vinyl alcohol): New strategies towards water-developable photoresists

    Manhart, J., Schlögl, S., Schauberger, J. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research

  467. Published

    Photochemical cross-linking of XNBR latex via thiol-ene reaction

    Lenko, D., Schlögl, S., Kern, W., Schaller, R. & Holzner, A., 2012.

    Research output: Contribution to conference › Poster › Research

  468. Published

    Photochemisches Vernetzungsverfahren für Naturkautschuk-Latex

    Schloegl, S. & Kern, W., 2012, In: Kautschuk, Gummi, Kunststoffe. 01/02, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  469. Published

    Photocrosslinkable modified vegetable oil based resin for wood surface coating application

    Mahendran, A. R., Wuzella, G., Aust, N., Kandelbauer, A. & Müller, U., 2012, In: Progress in organic coatings. 74, p. 697-704

    Research output: Contribution to journal › Article › Research › peer-review

  470. Published

    Photo-Fries-based photosensitive polymeric interlayers for patterned organic devices

    Motaigne Ramil, A., Hernandez-Sosa, G., Grießer, T., Simbrunner, C., Höfler, T., Trimmel, G., Kern, W., Shen, Q., Teichert, C., Schwabegger, G., Sitter, H. & Serdar Sriciftci, N., 2012, In: Applied physics / A (Series A, Materials science & processing). Juni, p. 985-993

    Research output: Contribution to journal › Article › Research › peer-review

  471. Published

    Polymeric Sensors and Actuators

    Fink, J., 2012

    Research output: Book/Report › Book › Research

  472. Published

    Pre-vulcanization of natural rubber latex by UV techniques: a process towards reducting type IV chemical sensitivity of latex articles

    Schloegl, S., Schaller, R., Holzner, A. & Kern, W., 2012, In: Rubber chemistry and technology. 83, p. 133-148

    Research output: Contribution to journal › Article › Research › peer-review

  473. Published

    Properties of chlorella-algea reinforced polyolefin compounds

    Laske, S., Piontek, M., Rieß, G. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 216-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  474. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  475. Published

    Reversible photochromism of polynorbornenes bearing spiropyran side groups

    Hauser, L., Knall, A.-C., Roth, M., Trimmel, G., Edler, M., Grießer, T. & Kern, W., 2012, In: Monatshefte für Chemie = Chemical monthly. 143, p. 1551-1558

    Research output: Contribution to journal › Article › Research › peer-review

  476. Published

    Selective Photo-induced Cross-linking of Polynorbornenes: Towards the Fabrication of Polymer 2D - and 3D-Mircostructures

    Wolfberger, A., Grießer, T., Daschiel, U., Schmidt, V., Jerrar, A., Teichert, C. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  477. Published

    Silica nanoparticles bearing a photoreactive shell

    Rieß, G., Schauberger, J., Muhr, N. & Kern, W., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  478. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  479. Published

    Synthesis and Characterization of a Bio-Based Resin from Linseed Oil

    Mahendran, A. R., Aust, N., Wuzella, G. & Kandelbauer, A., 2012, In: Macromolecular Symposia. 311, p. 18-27

    Research output: Contribution to journal › Article › Research › peer-review

  480. Published

    Thermal cure kinetics of epoxidized linseed oil with anhydride hardener

    Mahendran, A. R., Wuzella, G., Kandelbauer, A. & Aust, N., 2012, In: Journal of thermal analysis and calorimetry. 107, p. 989-998

    Research output: Contribution to journal › Article › Research › peer-review

  481. Published

    Thermal Decomposition Kinetics of Natural Fiber Reinforced Composite Using Model Free Kinetic Method

    Mahendran, A. R., Wuzella, G., Aust, N. & Müller, U., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  482. Published

    Untersuchung der Molmassenverteilung einer PMMA-Deckschicht

    Aust, N., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  483. Published

    UV-härtende Epoxidharzsysteme für Hochspannungsanwendung

    Yue, L., 2012

    Research output: Thesis › Master's Thesis

  484. Published

    UV-Induced Modulation of the Conductivity of Polyaniline: Towards a Photo-Patternable Charge Injection Layer for Structured Organic Light Emitting Diodes

    Grießer, T., Radl, S. V., Köpplmayr, T., Wolfberger, A., Edler, M., Pavitschitz, A., Kratzer, M., Teichert, C., Rath, T., Trimmer, G., Schwabegger, C., Simbrunner, C., Sitter, H. & Kern, W., 2012, In: Journal of materials chemistry. 22, p. 2922-2928

    Research output: Contribution to journal › Article › Research › peer-review

  485. Published

    Water-Developable Poly(2-Oxazoline)-Based Negative Photoresists

    Schenk, V., Ellmaier, L., Rossegger, E., Edler, M., Grießer, T., Weidinger, G. & Wiesbrock, F., 2012, In: Macromolecular rapid communications. 5, p. 396-400

    Research output: Contribution to journal › Article › Research › peer-review

  486. 2011
  487. Published

    Bio-based Non-Isocyanate Polyurethane Coatings Derived from Plant Oils

    Mahendran, A. R., Aust, N., Wuzella, G., Müller, U. & Kandelbauer, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  488. Published

    Charakterisierung von corona-behandelten ABS-Oberflächen

    Fankhauser, P., 2011, 132 p.

    Research output: Thesis › Master's Thesis

  489. Published

    Charakterisierung von PVC-Tunnelbahnen

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  490. Published

    COATING AND FUNCTIONALIZATION OF MONTMORILLONITE NANOPARTICLES FOR IMPROVED POLYMER PROCESSING

    Puchleitner, R., Rieß, G., Mattausch, H., Laske, S. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  491. Published

    Contact Batericides and Fungicides on the Basis of Amino-Functionalized Poly(norbornene)s

    Kreutzwiesner, E., Noormofidi, N., Wiesbrock, F., Kern, W., Rametsteiner, K. & Stelzer, F., 2011, In: Journal of polymer science : A, Polymer chemistry. 48, p. 4504-4514

    Research output: Contribution to journal › Article › Research › peer-review

  492. Published

    Derivatisation of SiO2 nanoparticles and immobilisation of functionalised SiO2 nanoparticles on photosensitive polymer surfaces

    Muhr, N., Kern, W. & Grießer, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  493. Published

    Epoxy silicone based matrix materials for two-photon patterning of optical waveguides

    Woods, R., Feldbacher, S., Langer, G., Satzinger, V., Schmidt, V. & Kern, W., 2011, In: Polymer. 52, p. 3031-3037

    Research output: Contribution to journal › Article › Research › peer-review

  494. Published

    Evaluation of different methods to characterize failure mechanisms of composite materials used as electrical insulation in high voltage applications

    Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F. & Kern, W., 2011, Proceedings of the 27th World Congress of the Polymer Processing Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  495. Published

    Flourination of Elastomer Materials

    Schloegl, S., Kramer, R., Lenko, D., Schaller, R., Holzner, A. & Kern, W., 2011, In: European polymer journal. 47, p. 2321-2330

    Research output: Contribution to journal › Article › Research › peer-review

  496. Published

    Fluorination of elastomer materials

    Kern, W., Kramer, R., Lenko, D., Schröttner, H., Schaller, R., Holzner, A. & Schlögl, S., 2011, In: European polymer journal. p. 2321-2330

    Research output: Contribution to journal › Article › Research › peer-review

  497. Published

    Handbook of Engineering and Speciality Thermoplastics: 2. Water soluble polymers

    Fink, J., 2011, Wiley-VCH . 436 p.

    Research output: Book/Report › Book › Research

  498. Published

    High Performance Polymers

    Fink, J., 2011

    Research output: Book/Report › Book › Research

  499. Published

    Investigation of the influence of stearic acid on rubber-brass adhesion

    Ziegler, E., Macher, J., Gruber, D. P., Pölt, P., Kern, W., Lummerstorfer, T., Feldgitscher, C., Holzner, A. & Trimmel, G., 2011, In: Rubber chemistry and technology. 85, 2, p. 264 - 276

    Research output: Contribution to journal › Article › Research › peer-review

  500. Published

    Manufacture of accelerator-free medical gloves via UV techniques

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2011, Proceedings of the 27th World Congress of the Polymer Processing Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  501. Published

    Molekulare Schichten auf Nickel- und Stahloberflächen und deren thermische Stabilität

    Mostegel, F., 2011

    Research output: Thesis › Master's Thesis

  502. Published

    Molmassenvverteilung von PMMA-Deckschichten

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  503. Published

    Oberflächenaktivierung und Funktionalisierung von Polyethylen

    Angerbauer, D., 2011, 63 p.

    Research output: Thesis › Master's Thesis

  504. Published

    Optimization of double-bond conversion of acrylic UV-curable resin formulationsJ

    Schauberger, J., Puchleitner, R., Yue, L., Rieß, G. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  505. Published

    Patterned Photoreactive Surface Layers Characterized by Friction Force Microscopy and Conductive Atomic-Force Microscopy

    Shen, Q., Pavitschitz, A., Hlawacek, G., Teichert, C., Edler, M., Radl, S., Grießer, T., Lex, A., Höfler, T., Trimmel, G. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  506. Published

    Petroleum Engineer's Guide to Oil Field Chemicals and Fluids

    Fink, J., 2011, 1. ed. ed. Amsterdam. 785 p.

    Research output: Book/Report › Book › Research

  507. Published

    Photolithographische Strukturierung von Polynorbornenderivaten mittels Thiol-en Reaktion

    Wolfberger, A., 2011

    Research output: Thesis › Master's Thesis

  508. Published

    Photosensitive Polymers bearing Fully Aromatic Esters for Multilayer Data Storage Devices

    Köpplmayr, T., Cardinale, M., Jakopic, G., Trimmel, G., Grießer, T. & Kern, W., 2011, In: Journal of materials chemistry. 21, p. 2965-2972

    Research output: Contribution to journal › Article › Research › peer-review

  509. Published

    Prozessevaluierung zur Herstellung von Lichtwellenleitern auf Leiterplatten

    Mayr, L., 2011

    Research output: Thesis › Master's Thesis

  510. Published

    Rheological, thermal and mechanical characterizations of polyolefin-algae compounds

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 127-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  511. Published

    Ring Opening Methathesis Polymerisation Derived Polymers as Photoresists: Making Use of Thiol-ene Chemistry

    Wolfberger, A., Rupp, B., Kern, W., Grießer, T. & Slugovc, C., 2011, In: Macromolecular rapid communications. 32, p. 518-522

    Research output: Contribution to journal › Article › Research › peer-review

  512. Published

    Schicht mit einem Lichtwellenleiter und Verfahren zu deren Herstellung

    Feldbacher, S. (Inventor), Woods, R. (Inventor) & Kern, W. (Inventor), 2011, Patent No. AT512001B1, Priority date 23 Sept 2011, Priority No. A1376/2011

    Research output: Patent

Previous 1 2 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/IV, 8700 Leoben
  • Main phone number: +43 3842 402 2301