Montanuniversität

Organisational unit: University

601 - 700 out of 30,152Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Emulsion Charakterisierung in porösen Medien

    Brandstätter, B., 2021

    Research output: Thesis › Master's Thesis

  3. Published

    Energiebetrachtung einer pharmazeutischen Produktionsanlage

    Prantl, M., 2021

    Research output: Thesis › Master's Thesis

  4. Published

    Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation

    Holzapfel, D. M., Music, D., Hans, M., Wolff-Goodrich, S., Holec, D., Bogdanovski, D., Arndt, M., Eriksson, A. O., Yalamanchili, K., Primetzhofer, D., Liebscher, C. & Schneider, J. M., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Entwicklung einer automatisierten Probenentnahme für Sinter

    Scherz, S., 2021

    Research output: Thesis › Master's Thesis

  6. Published

    Entwicklung einer effizienten Simulationsmethode für einen Gewindewalzprozess

    Weindl, C., 2021

    Research output: Thesis › Master's Thesis

  7. Published

    Entwicklung einer maßgeschneiderten Wärmebehandlungsroute für SLM gefertigte γ-TiAl-Hochtemperaturkomponenten

    Pürstl, F., 2021

    Research output: Thesis › Master's Thesis

  8. Published

    Entwicklung einer Reifegradsystematik für den Einkauf am Beispiel der voestalpine

    Pozdena, C. S. L., 2021

    Research output: Thesis › Master's Thesis

  9. Published

    Entwicklung eines Prüfkonzeptes für die hochfrequente Ermüdungsprüfung von kleinen, bauteilähnlichen Proben

    Klösch, R., 2021

    Research output: Thesis › Master's Thesis

  10. Published

    Entwicklung von Brandversuchen im Technikums-Maßstab zur Beurteilung der Effizienz von Löschmittelzusätzen

    Holubar, S., 2021

    Research output: Thesis › Master's Thesis

  11. Published

    Epigenetic-Hydrothermal Fluorite Veins in a Phosphorite Deposit from Balaton Highland (Pannonian Basin, Hungary): Signatures of a Regional Fluid Flow System in an Alpine Triassic Platform

    Molnar, Z., Kiss, G., Molnar, F., Vaczi, T., Czuppon, G., Dunkl, I., Zaccarini, F. & Dodony, I., 2021, In: Minerals. 11, 6, 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    ERLY CRETACEOUS PLUME-RIDGE INTERACTION IN THE BAND-E-ZEYARAT OPHIOLITE (NORTH MAKRAN, IRAN): NEW CONSTRAINTS FROM PETROLOGICAL, MINERAL CHEMISTRY AND GEOCHRONOLOGICAL DATA

    Barbero, E., Delavari, M., Dolati, A., Vahedi, L., Langone, A., Marroni, M., Pandolfi, L., Zaccarini, F. & Saccani, E., 2021, Ofioliti, GLOM 2021 Virtual Winter Meeting. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Erratum: Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers

    Sun, Y. W., Holec, D., Gehringer, D., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 2021, In: Physical review : B, Condensed matter and materials physics. 2021, 103, p. 119901-1 - 119901-3

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Errichtung eines Eisenbahntunnels in Deckelbauweise über dem Hauptsammler West der Stadt Stuttgart

    Granitzer, A., Tschuchnigg, F., Summerer, W., Galler, R. & Stoxreiter, T., 2021, In: Bauingenieur. 2021, 5, p. 156-164 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Erstellung eines Lastprofilgenerators für die Eisen- und Stahlbranche mittels ereignisorientierter Simulation

    Staubmann, T., 2021

    Research output: Thesis › Master's Thesis

  16. Published

    Erstellung eines Vorgehensmodells für die Akquise von Prozessdaten als Basis für die Anwendung von Predictive Maintenance

    Niederl, P., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    Erweichung von Kunststoffformenstählen beim Spritzgießen

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  18. Published

    Erzpetrographische und geochemische Analyse der polymetallischen Kupferlagerstätte Walchen bei Öblarn, Steiermark

    Brandner, P., 2021

    Research output: Thesis › Master's Thesis

  19. Published

    Estimating in Situ Rock Mass Strength and Elastic Modulus of a Geothermal Reservoir

    Villeneuve, M., Heap, M. J., Kushnir, A. R. L. & Baud, P., 2021.

    Research output: Contribution to conference › Paper › peer-review

  20. Accepted/In press

    Estimating Parameters of a Sine Wave by the Method of Variable Projection

    O'Leary, P. & Ninevski, D., 2021, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Evaluating Uniaxial Compressive Strength of Cement by Applying Ultrasonic Measurement Technique

    Roknian, P., 2021

    Research output: Thesis › Master's Thesis

  22. Published

    Evaluation of Seepage Failure of Overlying Rock in No.8105 Work Face of Zhuxianzhuang Coalmine

    Zhang, J., 2021

    Research output: Thesis › Master's Thesis

  23. Published

    Evaluation of the mechanisms of CO2-optimised chlorination reactions during the multi-metal recovery from precipitation residues of the zinc industry

    Lerche, R., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 2021, In: Surface & coatings technology. 2021, 418, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 406

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Existence, Uniqueness and Regularity of the Projection onto Differentiable Manifolds

    Steinicke, A. & Leobacher, G., 2021, In: Annals of global analysis and geometry.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Experimental Investigation on the Performance of Transition Metal Chloride in Catalyzing Coal Combustion

    Wei, H., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Experimental study and numerical simulation on rheological properties of PA66GF30 and ABS under pressure

    Gao, F., 2021

    Research output: Thesis › Master's Thesis

  29. Published

    Experimentelle Validierung der Richtlinien für die Vergleichbarkeit von Messungen zur Charakterisierung von Stoffaustauscheinbauten

    Triebl, A., Schlager, M. & Wolf-Zoellner, V., 2021.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fatigue strength assessment of additively manufactured 17-4PH structures considering surface layer effects and residual stresses

    Entfellner, P., 2021

    Research output: Thesis › Master's Thesis

  32. Published

    Fault Detection in a Combined Cycle Power Plant Based on Neural Networks of Simulated Process Data

    Rohrweck, P., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Features of thermal and hydraulic calculations in designing of cryogenic pipeline for LNG

    Basharova, L., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    FE-Simulation zur Vorhersage von Phasenspannungen mit dem Ziel der Vermeidung von Härterissen während der Wärmebehandlung

    Posch, C., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

    Zulfiqar, U., Kostoglou, N., Thomas, A. G., Rebholz, C., Matthews, A. & Lewis, D. J., 2021, In: Nanoscale. 2021, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Fluid Inclusions in Magnesites of Brumado Deposit, Bahia, Brazil

    Hauzinger, E., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Fracture Toughness Measurement

    Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices

    Buchinger, J., Wagner, A., Chen, Z., Zhang, Z., Holec, D., Mayrhofer, P. H. & Bartosik, M., 2021, In: Acta materialia. 2021, 202, p. 376-386

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fundamental material properties of the strontium-free SOC air electrode material La2Ni0.9Co0.1O4+δ

    Eisbacher-Lubensky, S. L., Egger, A., Bucher, E. & Sitte, W., 2021, 45th International Conference and Exposition on Advanced Ceramics and Composites (ICACC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Fundamental material property trends in the La0.8-xNdxCa0.2FeO3-δ series: crystal structure and thermal expansion

    Berger, C., Bucher, E., Lammer, J., Nader, C. & Sitte, W., 2021, In: Journal of materials science. 2021, 56, p. 10191–10203

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Funktionalisierung und Optimierung von Anti-Haft-Beschichtungen auf Organosilan-Basis

    Müller, M., 2021

    Research output: Thesis › Master's Thesis

  43. Published

    Generalization and Benchmarking of a Nonparametric Method for Derivative Discontinuity Detection

    Deutsch, K. H., 2021

    Research output: Thesis › Master's Thesis

  44. Published

    Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes

    Siller, M., Minkkinen, M., Bogust, P., Jelinek, A., Schatte, J., Bostrom, N., Greenland, K., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021, In: Medical physics. 2021, 48, p. 1546-1556

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Gezielte Beeinflussung der lokalen Eigenschaften von Sphäroguss unter Verwendung von 3D-gedruckten Kernen

    Brait, M., Koppensteiner, E., Schindelbacher, G. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68, 01/2021, p. 12-25

    Research output: Contribution to journal › Article › Research

  46. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Growth morphologies of dihydro-tetraaza-pentacene and -heptacene on (0001) sapphire

    Cicek, A., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    H2020 - Projekt DigiEcoQuarry

    Hartlieb, P., 2021, In: Stein & Kies : Wissenswertes zur Gewinnung mineralischer Rohstoffe in Österreich. 173

    Research output: Contribution to journal › Article › Research

  49. Published

    Hardware-in-the-loop for Simulation and Control of Greenhouse Climate

    Zaev, E., Babunski, D., Jovanovic, D., Rath, G. & Payr, M., 2021, p. 445. 448 p.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Heavy metal content of Lactuca sativa L. grown on soils from historic mining and smelting sites in Styria (Austria), determined by the electro-ultrafiltration (EUF) method and kinetic models

    Jelecevic, A., Sager, M., Vollprecht, D. & Liebhard, P., 2021, In: Journal of Elementology.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Herstellung und Testung von Wabenkatalysatoren für die Methanisierung von kohlenstoffhaltigen Prozessgasen im Labormaßstab

    Zawodnik, V., 2021

    Research output: Thesis › Master's Thesis

  52. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 2021, In: Surface & coatings technology. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    High-temperature high-pressure SCC testing of corrosion-resistant alloys

    Galakhova, A., Mori, G. K. & Prattes, K., 2021, In: Materials and Corrosion.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., 2021, In: Materialia. 2021, 16, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance

    Koutná, N., Brenner, A., Holec, D. & Mayrhofer, P. H., 2021, In: Acta materialia. 2021, 206, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, p. 1-11 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Hybrid Model for Detecting Abnormal Drilling Behaviors

    Lindner, A., 2021

    Research output: Thesis › Master's Thesis

  58. Published

    Hydrothermal alteration can result in pore pressurization and volcano instability

    Heap, M. J., Baumann, T., Gilg, H. A., Kolzenberg, S., Ryan, A., Villeneuve, M., Russell, K., Kennedy, L., Rosas-Carbajal, M. & Clynne, M., 2021, In: Geology.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Identifikation neuer Märkte zur wirtschaftlichen Verwendung vom Nebenprodukt „Nanopartikel“ aus der Metallpulverproduktion

    Brandner, K., 2021

    Research output: Thesis › Master's Thesis

  60. Published

    Impact of Conditioning Processes on the Performance of Rotating Anodes

    Sommerauer, M., 2021

    Research output: Thesis › Master's Thesis

  61. Published

    Impact of Covid‐19 on the Mining Sector and Raw Materials Security in Selected European Countries

    Galas, A., Kot‐Niewiadomska, A., Czerw, H., Simic, V., Tost, M., Warell, L. & Galas, S., 2021, In: Resources. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 2021, 100, p. 91-100

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Impact of the stacking sequence on the stability of transition-metal diborides

    Leiner, T., 2021

    Research output: Thesis › Master's Thesis

  64. Published

    Implementierung eines Low-Cost Human-Machine Interfaces in ein Cyber Physical Production System

    Messner, F., 2021

    Research output: Thesis › Master's Thesis

  65. Published

    Improved fracture resistance of Cu/Mo bilayers with thickness tailoring

    Cordill, M. J., Jörg, T., Többens, D. & Mitterer, C., 2021, In: Scripta materialia. 2021, 202, p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Improvement of the Utilization Versatility of High Chromium, Manganese and Phosphorus Basic Oxygen Furnace Slags by Carbo-thermal Reduction

    Breuer, F., 2021

    Research output: Thesis › Master's Thesis

  67. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 2021, 112, p. 262-270

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 417, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Influence of microalloying elements and deformation parameters on the recrystallization and precipitation behavior of two low-alloyed steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., 2021, In: Steel research international. 2021, 2100065, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy

    Ibanez-Perez, J., No, M. L., Oehring, M., Clemens, H. & San Juan, J. M., 2021, In: Journal of alloys and compounds. 2021, 867, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Influence of Nd-substitution on (La,Ca)FeO3 perovskites with regard to application in solid oxide fuel cell cathodes

    Bucher, E., Berger, C., Lammer, J., Nader, C. & Sitte, W., 2021, KERAMIK 2021- 96. Jahrestagung der Deutschen Keramischen Gesellschaft.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., 2021, In: Materialia. 2021, 15, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Influence of Slag Viscosity and Composition on the Inclusion Content in Steel

    You, D., Bernhard, C., Mayerhofer, A. & Michelic, S. K., 2021, In: ISIJ international. 61, 12, p. 2991-2997

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of the heat input on the dentritic solidification structure and the mechanical properties of 2.25Cr-1Mo-0,25V submerged-arc weld metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 2021, In: Journal of Materials Engineering and Performance. p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Influence of the silver content on mechanical properties of Ti-Cu-Ag thin films

    Rashid, S., Sebastiani, M., Mughal, Z. M., Daniel, R. & Bemporad, E., 2021, In: Nanomaterials. 2021, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Influence of Y-substitution on crystal structure and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ nanocomposites

    Berger, C., Lammer, J., Nader, C., Bucher, E., Grogger, W., Merkle, R., Maier, J. & Sitte, W., 2021, 2021 Spring Meeting of the European Materials Research Society (E-MRS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 2021, In: Surface & coatings technology. 2021, 406, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    In situ investigation of the rapid solidification behavior of intermetallic γ-TiAl-based alloys using high-energy X-ray diffraction

    Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 2021, In: Advanced Engineering Materials. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    In situ TEM observation of phase transformation in bulk metallic glass composites

    Sheng, H., Zhang, L., Zhang, H., Wang, J., Eckert, J. & Gammer, C., 2021, In: Materials Research Letters. 9, 4, p. 190-195 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Integration of an automated gas distribution station of a new generation

    Pestov, P., 2021

    Research output: Thesis › Master's Thesis

  83. Published

    Interim Report for the Activities of the First Half Year 2021A | Austrian branch Centre Mining Education UNESCO

    Voica, A., Brandl, J., Trettler, M. & Kucheryavaya, A., 2021, 52 p.

    Research output: Book/Report › Commissioned report › Research

  84. Published

    Investigating novel concepts to characterize the resistance against rapid crack propagation of polyamide 12 pipe grades

    Waly, C., 2021

    Research output: Thesis › Master's Thesis

  85. Published

    Investigation of Coal Pore Structure and Methane Adsorption and Diffusion Capacities Based on SAXS and Nano-CT

    Han, C., 2021

    Research output: Thesis › Master's Thesis

  86. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Investigation of the crude oil/brine interaction through interfacial viscoelasticity and microdispersion

    Nazifi, P., 2021

    Research output: Thesis › Master's Thesis

  88. Published

    Jet pump performance analysis and optimization plan

    Khammassi, C., 2021

    Research output: Thesis › Master's Thesis

  89. Published

    Konzeption eines Referenzmodells für ein Warehouse Management System

    Kaufmann, K., 2021

    Research output: Thesis › Master's Thesis

  90. Published

    Lean Improvement of Fenghuangshan silver mine's Beneficiation Process Based on Value Stream Map

    Li, L., 2021

    Research output: Thesis › Master's Thesis

  91. Published

    Leveraging Iterative Plan Refinement for Reactive Smart Manufacturing Systems

    Wally, B., Vyskocil, J., Novak, P., Huemer, C., Sindelar, R., Kadera, P., Mazak-Huemer, A. & Wimmer, M., 2021, In: IEEE transactions on automation science and engineering. 18, 1, p. 230-243 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Lithium-Ionen-Batterien – Kreislaufwirtschaftliche Herausforderungen am Ende des Lebenszyklus und im Recycling

    Altendorfer, M., Nigl, T., Rutrecht, B., Scherhaufer, S., Meyer, I., Sommer, M. & Beigl, P., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 2021, Vol. 166, p. 144-149

    Research output: Contribution to journal › Article › Research

  93. Published

    LSTM Hyperparameter Optimization: Impact of the Selection of Hyperparameters on Machine Learning Performance when applied to Time Series in Physical Systems

    Terbuch, A., 2021

    Research output: Thesis › Master's Thesis

  94. Published

    Machine Learning and KPI Analysis applied to Time-Series Data in Physical Systems: Comparison and Combination

    Haider, M., 2021

    Research output: Thesis › Master's Thesis

  95. Published

    Machine Learning Application in Early Stuck Pipe Sign Detection by Real-time Monitoring Surface Drilling Parameters

    Kobets, V., 2021

    Research output: Thesis › Master's Thesis

  96. Published

    Magnetostrictive behavior of severe plastically deformed, nanocrystalline materials

    Paulischin, A. B., 2021

    Research output: Thesis › Master's Thesis

  97. Published

    Managed pressure casing drilling analysis for an appraisal well in Jordan

    Al Hmoud, A., 2021

    Research output: Thesis › Master's Thesis

  98. Published

    Mechanical Constitution of Stable and Metastable Phases in Cu20Sn

    Lumper, L., 2021

    Research output: Thesis › Master's Thesis

  99. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Mechanische und thermische Simulation eines Formel 1 Einzylinder-Prüfstandsmotors bei extrem hohen Spitzendrücken

    Kübler, P., 2021

    Research output: Thesis › Master's Thesis

  101. Published

    Messung der Strömungsgeschwindigkeiten in Querschnitten von zwei Tunnelbauwerken

    De Monte, P., 2021

    Research output: Thesis › Master's Thesis

Previous 1...3 4 5 6 7 8 9 10 ...302 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402