Montanuniversität

Organisational unit: University

501 - 600 out of 30,152Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Investigation of particle-specific characteristics of non-hazardous, fine shredded mixed waste

    Weißenbach, T. & Sarc, R., 1 Jan 2021, In: Waste management. 119, 119, p. 162 - 171 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 1 Jan 2021, In: Materials and Design. 197, 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Sucker Rod Antibuckling System: Development and Field Application

    Langbauer, C., Fruhwirth, R. & Volker, L. J., 1 Jan 2021, In: SPE production & operations. 2021, doi.org/10.2118/205352-PA

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Alternative Transfer Chute System

    Prenner, M., Jan 2021, In: Mining Report Glückauf. 157.2021, 1, p. 78-86 9 p.

    Research output: Contribution to journal › Article › Research

  6. Published

    Effect of Pt nanoparticle decoration on the H2 storage performance of plasma-derived nanoporous graphene

    Kostoglou, N., Liao, C.-W., Wang, C.-Y., Kondo, J. N., Tampaxis, C., Steriotis, T., Giannakopoulos, K., Kontos, A. G., Hinder, S. J., Baker, M., Bousser, E., Matthews, A., Rebholz, C. & Mitterer, C., Jan 2021, In: Carbon. 171, 171, p. 294-305 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Lithium-Ion Batteries as Ignition Sources in Waste Treatment Processes—A Semi-Quantitate Risk Analysis and Assessment of Battery-Caused Waste Fires

    Nigl, T., Baldauf, M., Hohenberger, M. & Pomberger, R., Jan 2021, In: Processes : open access journal. 9, 1, p. 1-12 12 p., 49.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., Jan 2021, In: Additive Manufacturing. 37, January 2021, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    MINERALOGICAL, BIB-SEM AND PETROPHYSICAL DATA IN SEAL ROCK ANALYSIS: A CASE STUDY FROM THE VIENNA BASIN, AUSTRIA

    Misch, D., Siedl, W., Drews, M., Liu, B., Klaver, J., Pupp, M. & Sachsenhofer, R., Jan 2021, In: Journal of Petroleum Geology. 44, 1, p. 25-45 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P. & Kiener, D., Jan 2021, In: Materials characterization. 171.2021, January, 110822.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrous membranes

    Gürbüz, R., Sarac, B., Soprunyuk, V., Yüce, E., Eckert, J., Ozcan, A. & Sarac, A. S., Jan 2021, In: Polymers for Advanced Technologies. 32, 1, p. 248-261 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Über theoretische und reale Recyclingfähigkeit

    Pomberger, R., Jan 2021, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . p. 24 - 35 10 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Abgrenzung und Überlappung des europäischen Chemikalien- und Abfallrechts und Auswirkungen auf die Abfallwirtschaft

    Breiner, D., 2021

    Research output: Thesis › Master's Thesis

  16. Published

    A contribution of Middle – Late Jurassic Mélanges in the Northern Calcareous Alps (Raucherschober/Schafkogel) and the Inner Western Carpathians (Jaklovce) to the reconstruction of the Triassic – Jurassic passive and active Neo-Tethys distal continental margin

    Drvoderic, S., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Additive manufacturing of highly textured alumina ceramics

    Hofer, A.-K., Kraleva, I. & Bermejo, R., 2021, In: Open ceramics. 100085.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Additive manufacturing of high-strength alumina through a multi-material approach

    Schlacher, J. C., Hofer, A.-K., Geier, S., Kraleva, I. R., Papsik, R., Schwentenwein, M. & Bermejo, R., 2021, In: Open ceramics. 5, 100082.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Additive manufacturing of magnesium alloy using uniform droplet spraying: modeling of microstructure evolution

    Jaffar, S. M., Kostoglou, N., Fukuda, H., Rebholz, C., Ando, T., Liao, Y. & Doumanidis, C. C., 2021, In: MRS Advances. 2021, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Adsorption of Cholesterol by Carbon Nanotubes

    Vakhrushev, A. (Illustrator), 2021

    Research output: Book/Report › Book › Research

  22. Published

    Advanced Approach of SRP Downhole Dynamometer Evaluation - Proof of Concept

    Gattuso, E., 2021

    Research output: Thesis › Master's Thesis

  23. Published

    Advanced in situ electrochemical nanoindentation testing for understanding hydrogen-materials interactions

    Ebner, A., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Advances of materials for ion-selective membranes for extraction of Lithium ions out of saline water

    Raggam, S., 2021

    Research output: Thesis › Master's Thesis

  25. Published

    A lower bound for Cusick’s conjecture on the digits of n + t

    Spiegelhofer, L., 2021, In: Mathematical proceedings of the Cambridge Philosophical Society. 2021, 23 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Alteration-induced volcano instability at La Soufrière de Guadeloupe (Eastern Caribbean)

    Heap, M. J., Baumann, T., Rosas-Carbajal, M., Komorowski, J.-C., Gilg, H. A., Villeneuve, M., Moretti, R., Baud, P., Carbillet, L., Harnett, C. & Reuschlé, T., 2021, In: Journal of geophysical research.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    A multiscale structural investigation of metallic glass composites with advanced electron microscopic methods

    Fellner, S., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    An additively manufactured titanium alloy in the focus of metallography

    Fleißner-Rieger, C., Pogrielz, T., Obersteiner, D., Pfeifer, T., Clemens, H. & Mayer, S., 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 1, p. 4-31 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Analysis of Gas Trading - Examination of Gas Sales Agreements and Adaption of a ComFin Software Module

    Weninger, F., 2021

    Research output: Thesis › Master's Thesis

  30. Published

    Analysis of the strain information from nanodiffraction data

    Schretter, L., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Analysis of waste energy potential at compressor station and increase of its use

    Mullayanova, A., 2021

    Research output: Thesis › Master's Thesis

  32. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., 2021, In: Computational materials science. 2021, 197, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A New Drop Test Rig for Kiirunavaara Mine

    Ungerer, K., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    A new heuristic and an exact approach for a production planning problem

    Auer, P., Dósa, G., Dulai, T., Fügenschuh, A., Näser, P., Ortner, R. & Werner-Starkne, A., 2021, In: Central European Journal of Operations Research. 29.2021, September, p. 1079-1113 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Anlagenkonzeption für die Scholz Rohstoffhandel GmbH am Standort Laxenburg

    Bauernfeind, F., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    A Positioning System for Mobile Equipment based on Ultra Wideband Radio

    Plessing, L., 2021

    Research output: Thesis › Master's Thesis

  37. Published

    A simple method to model buckling slope instability using continuum numerical models

    Ridl, R., Bell, D., Villeneuve, M. & MacFarlane, D., 2021, Rocscience International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Aufbau eines Versuchsstandes zur Entfernung von Quecksilber aus Erdöl

    Rokita, M., 2021

    Research output: Thesis › Master's Thesis

  39. Published

    Ausbildung und Training am ZAB

    Galler, R., 2021, In: Stein & Kies : Wissenswertes zur Gewinnung mineralischer Rohstoffe in Österreich. Jan-Feb 2021, 170, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  40. Published

    Auswirkungen intergranularer Oxidation auf die Oberflächenrissbildung beim Stranggießen von Stahl

    Gaiser, G., 2021

    Research output: Thesis › Master's Thesis

  41. Published

    Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., 2021, In: Steel research international. 2021, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Bewertung des Einsatzes des Wertstoffscanners bei der Sammlung von gemischtem Siedlungsabfall

    Pum, R., 2021

    Research output: Thesis › Master's Thesis

  44. Published

    Buckling Analysis of an Uncemented Tieback During Production, Injection and Pressure Tests

    Ulrich, B., 2021

    Research output: Thesis › Master's Thesis

  45. Published

    Bulk inclusion micro-zircon U–Pb geochronology: A new tool to date low-grade metamorphism

    Hollinetz, M. S., Schneider, D., McFarlane, C. R. M., Huet, B., Rantitsch, G. & Grasemann, B., 2021, In: Journal of metamorphic geology. 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Burial, accretion, and exhumation of the Oman-UAE metamorphic sole

    Ambrose, T., Searle, M., Waters, D., Gopon, P. & Forshaw, J., 2021, In: Tectonics. 40

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Business Model Innovation in the Fields of Industrial Goods: Designing a Framework

    Hechtl, B., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    CALPHAD assessment of the Ti-W system including experimental and ab-initio data

    Spitaler, T. & Romaner, L., 2021.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 2021, In: Surface & coatings technology. 2021, 421, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Cathodic arc evaporated high-entropy alloy-based metallic and nitride coatings

    Wasenbelz, F., 2021

    Research output: Thesis › Master's Thesis

  51. Published

    Challenges in production and distribution of low-tonnage LNG

    Mikriukov, P., 2021

    Research output: Thesis › Master's Thesis

  52. Published

    Chloridinduzierte Spannungsrisskorrosion neuer CrNiMoMnN-Austenite

    Stiedl, G., 2021

    Research output: Thesis › Master's Thesis

  53. Accepted/In press

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 2021, (Accepted/In press) In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Comparison of different comminution processes to support the automated sorting of refractory recycling materials

    Konkina, D., 2021

    Research output: Thesis › Master's Thesis

  55. Published

    Comparison of evaluation methods regarding the tooth root stress for spur and helical gears in pulsator tests

    Fiedler, F., 2021

    Research output: Thesis › Master's Thesis

  56. Published

    Conceptualization of a data integration and storage framework to enable predictive analytics and application of data analytical algorithms in the manufacturing industry

    Kernbauer, S. P., 2021

    Research output: Thesis › Master's Thesis

  57. Published

    Conditions of the Formation Gas Deposits in the Epart of the Dnieper-Donets Basin: Integration of Basin Modeling Data with Consequences of Strike-Slip Faulting Effects

    Privalov, V., Loktyev, V., Misch, D., Sachsenhofer, R., Karpenko, I., Panova, O. & Formation, O., 2021, Society of Petroleum Engineers - SPE Eastern Europe Subsurface Conference, EESC 2021. The Society of Petroleum Engineers, (Society of Petroleum Engineers - SPE Eastern Europe Subsurface Conference, EESC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Contact Damage of Alumina-Based Layered Ceramics with Tailored Microstructure

    Jabr, A., 2021

    Research output: Thesis › Master's Thesis

  59. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 821, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Correlation of process conditions, microstructure and mechanical properties of magnetron sputtered equiatomic CrMnFeNiCo alloys

    Baumegger, W., 2021

    Research output: Thesis › Master's Thesis

  61. Published

    Crude oil wax remediation using enhanced chemical formulations

    Al-Gaadabi, M. Q. A., 2021

    Research output: Thesis › Master's Thesis

  62. Published

    Damage initiation in hard-coated hard metal substrates under normal and tangential loads at elevated temperature

    Walch, L., 2021

    Research output: Thesis › Master's Thesis

  63. Published

    Darstellung ökologischer Aspekte der Aufbereitung wichtiger Reststoffgruppen und deren Relevanz für den Klimaschutz mittels Ökobilanzierung

    Groiß, A., 2021

    Research output: Thesis › Master's Thesis

  64. Published

    Das Fast Tunnel Modelling Tool für Untertagebauwerke

    Hofer, P., Strauß, C., Eder, J., Hager, L., Wenighofer, R., Nöger, M. & Fuchs, S., 2021. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  65. Published

    Das Kieswerk Sulzau - Bestandsaufnahme und Planung des Abbaues bis zum Lagerstättenende

    Haigermoser, P., 2021

    Research output: Thesis › Master's Thesis

  66. Published

    Data-Driven Model for Measuring Hydraulic Fracturing Efficiency by Utilizing the Real-time Treatment Data.

    Zhukova, K., 2021

    Research output: Thesis › Master's Thesis

  67. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Degradation mechanisms of solid oxide cell air electrodes: The role of cation segregation and contaminants

    Bucher, E., 2021, 45th International Conference and Expo on Advanced Ceramics and Composites (ICACC2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Der Einfluss von Industrie 4.0 Erfolgsfaktoren auf die Unternehmensperformance

    Mühlberger, M., 2021

    Research output: Thesis › Master's Thesis

  70. Published

    Design of a cryogenic pipeline for natural gas transportation

    Dudnikov, N., 2021

    Research output: Thesis › Master's Thesis

  71. Published

    Design of a Heat Exchanger for the Pump Test Facility

    Hasni, M., 2021

    Research output: Thesis › Master's Thesis

  72. Published

    Design of Pressure Control for Optimal Damping in Individual Metering Systems

    Rath, G., Zaev, E., Stojanoski, G. & Babunski, D., 2021.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    Detection of subsurface cracks using inductive thermography

    Oswald-Tranta, B., Tuschl, C. & Hackl, A., 2021.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    Detection of subsurface cracks using inductive thermography

    Oswald-Tranta, B., Tuschl, C. & Hackl, A., 2021, In: Proceedings of SPIE. 11743

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Developing a refractory test method for Platinum-Group-Metals Smelters

    Tichy, S., 2021

    Research output: Thesis › Master's Thesis

  76. Published

    Development and Hardware-in-the-Loop Simulation of an Air Purifier Automativ Control System

    Zaev, E., Babunski, D., Jovanovic, D., Rath, G. & Payr, M., 2021, p. 445. 448 p.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    Development of a multi-layer project management framework for SME's using PHP and SQL

    Schmölzer, H.-J., 2021

    Research output: Thesis › Master's Thesis

  78. Published

    Development of an Excavation Concept for Lunar Regolith

    Höber, D., 2021

    Research output: Thesis › Master's Thesis

  79. Published

    Die biologische Methanisierung von Altspeisefett

    Callegari, M., 2021

    Research output: Thesis › Master's Thesis

  80. Published

    Die Circular Economy an der Montanuniversität im Zeichen des European Green Deal

    Mazak-Huemer, A. & Moser, P., 2021, Reset Europe : Impulse für die Zukunft. Hösele, H. & Wieser, L. (eds.). p. 190-194 5 p. (Edition Geist& Gegenwart).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  81. Published

    Differentiation und Lagerstättenpotential ausgewählter Pegmatite in Defereggen (Osttirol)

    Horvat, C., 2021

    Research output: Thesis › Master's Thesis

  82. Published

    Digitalisierung in der Auftragsabwicklung am Beispiel eines Energiehandelsunternehmens mit eigenem Fuhrpark

    Hatzl, S., 2021

    Research output: Thesis › Master's Thesis

  83. Published

    Digitalisierung in der Gießereitechnik: Teil 1: Herausforderungen und Chancen

    Bührig-Polaczek, A., Rudack, M., Salentin, F. G., Sandt, M., Hartmann, D., Brait, M., Koppensteiner, E., Schindelbacher, G. & Schumacher, P., 2021, In: Gießerei. p. 37-43

    Research output: Contribution to journal › Article › Research

  84. Accepted/In press

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A. & Kharicha, A., 2021, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Dokumentation und Bewertung ausgewählter Schnittzonen im Salinar des Standortes Hattorf/Wintershall (Werk Werra)

    Reiff, M., 2021

    Research output: Thesis › Master's Thesis

  86. Published

    Downhole Dynamometer Sensor Data Evaluation

    Frauscher, G. I., 2021

    Research output: Thesis › Master's Thesis

  87. Published

    Economic and ecological aspects of electro- mobility in commercial fleet operations

    Wiszniewski, L., 2021

    Research output: Thesis › Master's Thesis

  88. E-pub ahead of print

    Effect of binder system on the thermo-physical properties of 3D-printed zirconia ceramics

    Hofer, A.-K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, M., Gavalda-Velasco, I., Schlacher, J. C., Schwentenwein, M. & Bermejo, R., 2021, (E-pub ahead of print) In: International journal of applied ceramic technology.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Effect of environmental relative humidity on hydrogen-induced mechanical degradation in an Al–Zn–Mg–Cu alloy

    Safyari, M., Hojo, T. & Moshtaghi, M., 2021, In: Vacuum.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effect of shape and particle size distribution of inert surface particles on the oxygen exchange kinetics of oxide ceramics

    Preis, W., 2021, In: The journal of physics and chemistry of solids : JPCS. 148, 8 p., 109735.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Effect of solution treatment temperature on grain boundary composition and environmental hydrogen embrittlement of an Al–Zn–Mg–Cu alloy

    Moshtaghi, M., Safyari, M. & Hojo, T., 2021, In: Vacuum.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Effects of acid leaching treatment of soda lime silicate glass on crack initiation and fracture

    Sheth, N., Greenly, C., Bermejo, R., Mauro, J. C., Pantano, C. G. & Kim, S. H., 2021, In: Journal of the American Ceramic Society. 104, p. 4550-4558

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Effects of metallic Y and Ti addition on the dispersion and solubility behaviour of added Y2O3 in an ODS FeCrMnNiCo HEA during mechanical alloying.

    Gruber, P., 2021

    Research output: Thesis › Master's Thesis

  94. Published

    Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

    Donchev, A., Mengis, L., Couret, A., Mayer, S., Clemens, H. & Galetz, M., 2021, In: Intermetallics. 2021, 139, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Ein Datenmodell zur digitalen Dokumentation des Bauprozesses im Tunnelbau

    Zach, K. C., 2021

    Research output: Thesis › Master's Thesis

  96. Published

    Einfluss der Clusterbildung auf die Aushärtung und das Umformverhalten von verschiedenen Aluminiumlegierungen

    Aster, P., 2021

    Research output: Thesis › Master's Thesis

  97. Published

    Einfluss der Gasatmosphäre auf die Hydrothermale Verflüssigung biogener Reststoffe

    Graf, E., 2021

    Research output: Thesis › Master's Thesis

  98. Published

    Einfluss der Mobilitäten der Tripelpunkte und Korngrenzen auf die Kinetik des Kornwachstums

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  99. Published

    Einfluss von Tantal auf die Kornfeinung einer Al10SiMg Legierung

    Pammer, M., LI, J. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68, 02/2021, p. 15-20

    Research output: Contribution to journal › Article › Research

  100. Published

    Einfluss von unterschiedlichen Schmelzrippen-Geometrien auf die Dichtheit von Kunststoffumspritzungen von Steckverbindern

    Preissegger, F., 2021

    Research output: Thesis › Master's Thesis

  101. Published

    Employement effects of different municipal waste treatment systems based on data from Austria

    Pomberger, R., Altendorfer, M. & Gelbmann, U., 2021, In: Detritus. p. 1 - 16 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 12 3 4 5 6 7 8 9 ...302 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402