Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

701 - 800 out of 2,143Page size: 100

Publications / Theses

  1. 2015
  2. Published

    Korngrößenbestimmung von unbekannten Aluminiumprofilen

    Kolb, G. & Felser, J., 2015, 11 p.

    Research output: Book/Report › Commissioned report › Transfer

  3. Published

    Legierungselemente und Wärmebehandlungen von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 2015.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Legierungs- und Prozessdesign von Al-Mg-Si Knetlegierungen für den Automobilbau

    Prillhofer, R., 2015

    Research output: Thesis › Doctoral Thesis

  5. Published

    Methoden der Pulvercharakterisierung Enabling & Efficient Cold Gas Spraying

    Ratschbacher, K., 2015

    Research output: Book/Report › Other report › Research

  6. Published

    New development in metal recovery from secondary resources

    Pichler, C., Antrekowitsch, H. & Rumpold, R., 2015, p. 115. 127 p.

    Research output: Contribution to conference › Paper

  7. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe (Projektabschluss)

    Kremmer, T. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, Recycling und Rohstoffe. Neuruppin: TK-Verl., Vol. 8. p. 325 - 344 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Optimierung des Al-Recyclingprozesses von verunreinigten Schrotten

    Pirker, A., 2015

    Research output: Thesis › Doctoral Thesis

  10. Published

    Oxidation kinetics of a molybdenum-tantalum-alloy

    Ratschbacher, K. & Luidold, S., 2015, p. 771-782.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Potential of a hydrometallurgical recycling process for catalysts to cover the demand for critical metals, like PGM and cerium

    Steinlechner, S. & Antrekowitsch, J., 2015, In: JOM. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS

    Steinlechner, S. & Antrekowitsch, J., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals

    Steinlechner, S. & Antrekowitsch, J., 2015, Wastes Solutions Treatments Opportunities. p. 341-357

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Recovery of Lead in Residues from Hydrometallurgical Zinc Winning

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Recycling of aluminium powdered waste

    Zöhrer, M. & Angerer, T., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 1132 1133 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Recycling of Complex Materials with Focus on Zinc-, Lead- Containing Residues

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Recycling of low grade aluminium scrap: Optimisation of the melting process by using oxyfuel technology

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Recycling of Nd2Fe14B Magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, p. 925-938. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Recycling of refractory metals

    Ratschbacher, K., 2015

    Research output: Thesis › Doctoral Thesis

  22. Published

    Recycling of Zinc Shortcourse EMC

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Recycling von Elektronikschrott unter besonderer Berücksichtigung der Sondermetalle und Seltenen Erden

    Stuhlpfarrer, P., 2015

    Research output: Thesis › Doctoral Thesis

  24. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Kügele, A., 2015, Recycling und Rohstoffe. Neuruppin, Vol. 8. p. 371 384 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Recycling von sekundären Batteriesystemen

    Kaindl, M., 2015

    Research output: Thesis › Doctoral Thesis

  26. Published

    Reprint of: Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2015, In: Thermochimica Acta. 603, 10, p. 46-52

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Resources, Recycling, Claims

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Reststoffe aus der Metallurgie: Potential oder Konkurrenz für die Mineralrohstoffindustrie?

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Rückgewinnung ausgewählter kritischer Rohstoffe aus einem hydrometallurgischen Magnet-Recyclingprozess

    Alf, O., 2015

    Research output: Thesis › Master's Thesis

  30. Published

    Rückgewinnung von kritischen Metallen aus Rückständen der Leiterplatten Aufbereitung

    Benigni, C., 2015

    Research output: Thesis › Master's Thesis

  31. Published

    Solute transport in age-hardenable aluminum alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Stahlwerksstaubrecycling im 21. Jahrhundert, aktuelle Entwicklungen und zukünftige Herausforderungen

    Antrekowitsch, J., 2015, Berliner Recycling und Rohstoffkonferenz.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  33. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015, TMS Light Metals 2015. Hyland, M. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Stoffliches Recycling von Elektronikschrott - eine Herausforderung für die Zukunft

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Sustainable ways to recycle metallurgical residues in the 21st century

    Pichler, C., 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Technical optimization and economic evaluation of the lead bath recycling process

    Böckl, B., 2015

    Research output: Thesis › Master's Thesis

  40. Published

    Technical presentation – Nonferrous Metallurgy

    Steinlechner, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    The current status of mini mill solutions for the recycling of steel mill dusts

    Antrekowitsch, J. & Steinlechner, S., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    The current status of mini mill solutions for the recycling of steel mill dusts - new aspects in hydrometallurgy

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    TiO2-Pigmentherstellung – Technik und Wirtschaftlichkeit eines kombinierten Verfahrens

    Miedler, P., 2015

    Research output: Thesis › Master's Thesis

  44. Published

    Treatment of industrial waste

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Duspiva, F., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 833 844 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Untersuchung des Einflusses von einzelnen Parametern auf die Zinnausbringung im Konverterstaub

    Kaisergruber, F., 2015

    Research output: Thesis › Master's Thesis

  46. Published

    Untersuchungen zum Verhalten von Silber und Indium in Rückständen der Zinkindustrie in einem pyrometallurgischen Aufarbeitungsschritt

    Leuchtenmüller, M., 2015

    Research output: Thesis › Master's Thesis

  47. Published

    Verwertungsstrategien von Wälzschlacke

    Pichler, C., 2015

    Research output: Thesis › Doctoral Thesis

  48. Published

    Zerspanen und Eloxieren von Recyclingaluminium

    Schlögl, C., 2015

    Research output: Thesis › Doctoral Thesis

  49. 2014
  50. Published

    Investigation of the corrosion behavior of Zn-Al-Mg hot-dip galvanized steel in alternating climate tests

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Mori, G. & Antrekowitsch, H., 1 Dec 2014, In: Corrosion. 70, 12, p. 1238-1248 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of Sn-solubility on Suppression of Natural Aging in an AA6061 Aluminum Alloy

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 15 Oct 2014.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Commenda, C., Mori, G. & Antrekowitsch, H., 1 Sept 2014, In: Materials and Corrosion. 65, 9, p. 871-880 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Einfluss des Mikrolegierungselements Sn auf den negativen Effekt der Kaltauslagerung auf die nachfolgende Warmauslagerung in Al-Mg-Si Legierungen

    Werinos, M. & Antrekowitsch, H., 25 Aug 2014.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminium-Legierungen

    Werinos, M. & Antrekowitsch, H., 27 May 2014.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Bewertung der Reduzierbarkeit von hämatitischem Eisenerz unter hochofenähnlichen Bedingungen

    Baumgartner, K., Scheiber, S., Zarl, M. A. & Hanel, M., 12 May 2014.

    Research output: Contribution to conference › Poster › Research

  57. Published

    Projektpräsentation - Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminium-Legierungen

    Werinos, M. & Antrekowitsch, H., 7 May 2014.

    Research output: Contribution to conference › Presentation › Research

  58. Published

    Verhalten von Halogenverbindungen in sekundären Zinkoxiden während eines thermischen Behandlungsschrittes

    Steinlechner, S. & Antrekowitsch, J., 1 Jan 2014, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 67, 4, p. 213-219 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Recyclingkonzepte zur Rückgewinnung vonMassen- und Technologiemetallen aus E-Schrotten der Kategorie 3

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., Jan 2014, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 67, 1, p. 28-37 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    "2sDR"-A simultaneous recovery of various heavy metals from EAFD´s

    Rösler, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    “2sDR”: Process Development of a Sustainable Way to Recycle Steel Mill Dusts in the 21st Century

    Rösler, G., Pichler, C., Antrekowitsch, J. & Wegscheider, S., 2014, In: JOM. 66, p. 1721-1729

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    ADR 2015 Österreich

    Kolb, G., 2014

    Research output: Book/Report › Commissioned report › Transfer

  63. Published

    Aktuelle Aktivitäten zu den Europäischen Rohstoffinitiativen

    Maier, A., Moser, P., Eichlseder, W., Mühlburger, M., Brugger, K., Antrekowitsch, H. & Hoscher, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 143-148

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Alkalische Elektrolyse für mobile Anwendungen

    Fasching, J., 2014

    Research output: Thesis › Master's Thesis

  65. Published

    Alternative Verfahren zur Aufarbeitung von Stäuben aus der Stahlindustrie

    Pichler, C. & Antrekowitsch, J., 2014, Mineralische Nebenprodukte und Abfälle. p. 399-409

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Aluminium im Fassadenbau

    Kolb, G., 2014

    Research output: Book/Report › Commissioned report › Transfer

  67. Published

    Analyse fehlerhafter eloxierter Bauteile

    Schlögl, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Analyse von Kupfervormaterial

    Schlögl, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    A sustainable recycling process for simultaneous recovery of Zn, Pb and Ag from a dumped slag

    Unger, A., Steinlechner, S. & Antrekowitsch, J., 2014, Shechtman International Symposium 2014. p. 179-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Atom probe tomography investigations of modified early stage clustering in Si containing aluminum alloys

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P. J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  71. Published

    Auswirkung der Ofenfahrweise auf die Schmelzausbeute

    Pirker, A. & Antrekowitsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Auswirkung des Zeitpunktes der Flussspatzugabe auf die Schmelzausbeute

    Pirker, A. & Antrekowitsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Auswirkungen der Pyrolyse auf die metallurgische Weiterverarbeitung von Elektronikschrotten

    Sorger, C., 2014

    Research output: Thesis › Master's Thesis

  74. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P. & Luidold, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 306-307

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2014.

    Research output: Contribution to conference › Paper

  77. Published

    Behavior of halogen compounds in secondary zinc oxide during thermal treatment,Verhalten von Halogenverbindungen in sekundären Zinkoxiden während eines thermischen Behandlungsschrittes

    Steinlechner, S. & Antrekowitsch, J., 2014, In: World of Metallurgy - ERZMETALL.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Behaviour of Halogen Compounds in Secondary Zinc Oxide during Thermal Treatment

    Steinlechner, S. & Antrekowitsch, J., 2014, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 67, p. 213-219

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Bericht des 3. Forschungsjahres: Oxidation von Metallen

    Sobotka, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Bestimmung des Abschwelverhaltens von Schredderrückständen I

    Schnideritsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Bestimmung des Abschwelverhaltens von Schredderrückständen II

    Schnideritsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Bewertung der Warmrissneigung von Al-Knetlegierungen

    Ata, H. H., 2014, 131 p.

    Research output: Thesis › Master's Thesis

  83. Published

    Bewertung unterschiedlicher Messmethoden zur Bestimmung der Feuchtigkeit in Salzmischungen

    Pirker, A. & Antrekowitsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Briquetting of coke enriched Fe-Cr-Ni residues for the subsequent production of a high quality alloys

    Rösler, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Burnt to a crisp? – Why oxygen enhanced combustion doesn’t have to influence steel oxidation

    Sobotka, C., Schnideritsch, H. & Antrekowitsch, H., 2014, Shechtman International Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Characterisation of aluminium chips

    Pirker, A., Antrekowitsch, H., Suppan, H., Kettner, M. & Fragner, W., 2014, Aluminium 2014 Conference, Proceeding Session Plant and Equipment II. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Characterisation of different overlay welding on kettle steel - Part 1

    Schnideritsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2014, In: Thermochimica Acta. 590, p. 84-90

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Charakterisierung von Ausgangsmaterialien für die Zinkoxidproduktion

    Steinlechner, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Charakterisierung von diversen NE-Schredderfraktionen

    Schnideritsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Charakterisierung von Flugstäuben aus der Kupferindustrie

    Schnideritsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Compositional dependence of shear-band dynamics in the Zr-Cu-Al bulk metallic glass system

    Thurnheer, P., Maaß, R., Pogatscher, S. & Löffler, J. F., 2014, In: Applied physics letters. 104, p. 101910-1-101910-4

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Correlation between supersaturation of solid solution and mechanical behaviour of two binary Al-Si-alloys

    Schumacher, P., Reich, M., Mohles, V., Pogatscher, S., Uggowitzer, P. J. & Milkereit, B., 2014, In: Materials Science Forum. p. 508-514

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Der 2sDR Prozess

    Pichler, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Der 2sDR Prozess als Alternative für das Recycling von Stahlwerksstäuben

    Pichler, C. & Rösler, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Der 2sDR Prozess als Alternative für das Recycling von Stahlwerksstäuben

    Pichler, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Detailuntersuchungen zum Aufschluss eines Poliermittels

    Poscher, A. & Luidold, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Diffusion on Demand to Control Precipitation Aging: Application to Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Moszner, F., Gerstl, S. S. A., Francis, M. F., Curtin, W. A., Löffler, J. F. & Uggowitzer, P. J., 2014, In: Physical review letters. 112, p. 225701-225705

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Drehen von Aluminiumbauteilen

    Schlögl, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Drehrohr Mo-Ta

    Ratschbacher, K. & Luidold, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Einfluss der Ofenatmosphäre auf die Oxidation von Aluminium

    Sobotka, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Einfluss des KCl-Gehaltes de Salzschlacke auf die Schmelzausbeute

    Pirker, A. & Antrekowitsch, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...22 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 5204