Chair of Mechanics (400)

Organisational unit: Chair

1 - 100 out of 699Page size: 100

Publications / Theses

  1. 2022
  2. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139, 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2021
  4. Published

    Surface stress of gold nanoparticles revisited

    Holec, D., Löfler, L., Zickler, G., Vollath, D. & Fischer, F.-D., 1 Aug 2021, In: International journal of solids and structures. 224.2021, 1 August, p. 1-13 13 p., 111044.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2

    Tang, M., Rong, Z. C., Li, F. X., Yi, J. H., Eckert, J. & Liu, Y. C., Aug 2021, In: Computational & theoretical chemistry. 1202, 113304.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    First-Principles Study of the Intrinsic Properties of the fcc/hcp-Ti Boundary in Carbon Nanotube/Ti Composites Prepared by High-Pressure Torsion

    Rong, Z., Hao, P., Tang, M., Chen, P., Li, F., Yi, J., Şopu, D., Eckert, J. & Liu, Y., Jul 2021, In: Physica Status Solidi (B) Basic Research. 258, 7, 2100093.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 309-313 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.

    Lamik, A., Thonhauser, G., Ravi, K., Prohaska-Marchried, M., Pittino, G. & Antretter, T., 27 May 2021, p. 1-13. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers Inc., 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Role of elastic strain energy in spheroidal precipitates revisited

    Böhm, H. J., Zickler, G., Fischer, F.-D. & Svoboda, J., Apr 2021, In: Mechanics of materials. 155, April, 6 p., 103781.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., 2021, In: Computational materials science. 2021, 197, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Einfluss der Mobilitäten der Tripelpunkte und Korngrenzen auf die Kinetik des Kornwachstums

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  13. Published

    FE-Simulation zur Vorhersage von Phasenspannungen mit dem Ziel der Vermeidung von Härterissen während der Wärmebehandlung

    Posch, C., 2021

    Research output: Thesis › Master's Thesis

  14. Published

    Simulation der thermischen Belastung blockgebremster Eisenbahnräder

    Scheinast, D., 2021

    Research output: Thesis › Master's Thesis

  15. 2020
  16. Published

    Transient phase fraction and dislocation density estimation from in-situ X-ray diffraction data with a low signal-to-noise ratio using a Bayesian approach to the Rietveld analysis

    Wiessner, M., Angerer, P., van der Zwaag, S. & Gamsjäger, E., 25 Dec 2020, In: Materials characterization. 172.2021, February, 9 p., 110860.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles

    Hackl, K., Fischer, F.-D. & Svoboda, J., Dec 2020, In: Journal of the mechanics and physics of solids. 145, p. 104149-1-7 7 p., 104149.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 20 Nov 2020, (E-pub ahead of print) In: Acta materialia. 204.2021, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Coupled damage variable based on fracture locus: Prediction of ductile failure in a complex structure

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Oct 2020, In: International journal of solids and structures. 207.2020, December, p. 132-144 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Too much to ask for oder Wie ein Moodle Server bei laufender Prüfung in die Knie gezwungen wird

    Orthaber, M. & Antretter, T., 8 Oct 2020, <fnma> Magazin 03|2020. Graz, Vol. 03/2020.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  21. Published

    On an alternative approach for simulating chemically induced crack pattern evolutions in a single crystal

    Predan, J., Kegl, M., Abart, R., Fischer, F.-D. & Rammerstorfer, F. G., 1 Oct 2020, In: International journal of solids and structures. 202, p. 575-586 12 p., 202.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Constraints in thermodynamic extremal principles for non-local dissipative processes

    Hackl, K., Fischer, F.-D. & Svoboda, J., 1 Sept 2020, In: Continuum Mechanics and Thermodynamics. 32, 5, p. 1337-1345 9 p., 32.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    EXAM-ON-DEMAND: SCHRIFTLICHE ONLINE-PRÜFUNGEN ALS ANTWORT AUF DEN LOCKDOWN

    Orthaber, M. & Antretter, T., 31 Jul 2020, fnma Magazin 02/2020 - E-Assessment und E-Examinations . Graz, Vol. 02/2020. p. 47 - 49 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  25. Published

    Concepts for E-Assessments in STEM on the Example of Engineering Mechanics: How to assess complex engineering problems electronically

    Orthaber, M., Stütz, D., Antretter, T. & Ebner, M., 26 Jun 2020, In: International journal emerging technologies in learning : iJET. 15, 12, p. 136-152 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Surface Energy of Au Nanoparticles Depending on Their Size and Shape

    Holec, D., Dumitraschkewitz, P., Vollath, D. & Fischer, F.-D., 8 Mar 2020, In: Nanomaterials. 10.2020, 3, p. 1-15 15 p., 484.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth

    Gamsjäger, E., Gschöpf, B. & Svoboda, J., 27 Jan 2020, In: Metals : open access journal . 10.2020, 18 p., 185.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    A Modeling Framework for Enhanced Reliability of Printed Circuit Boards and Power Electronics

    Gschwandl, M., 2020

    Research output: Thesis › Doctoral Thesis

  29. Published

    Bewertung numerischer Methoden für die Simulation von induktivem Erwärmen von Maschinenbauteilen

    Gschwentner, A., 2020

    Research output: Thesis › Master's Thesis

  30. Published

    Crossings – Deformation, Damage and Optimization

    Wiedorn, J., 2020

    Research output: Thesis › Doctoral Thesis

  31. Published

    Model-based residual stress design in multiphase seamless steel tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 2020, In: Materials. 2020, 13, 439.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2020, In: Philosophical magazine. 2020, p. 1942-1961 20 p., 100.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2020, In: Philosophical magazine. p. 1942-1961

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Numerical analysis of a high speed large engine connecting rod

    Gschwandl, T. J., 2020

    Research output: Thesis › Master's Thesis

  35. Published

    Numerical Simulation of Crack Propagation during the Deformation of Galvanized PHS Sheets

    Hammer, P. J., 2020

    Research output: Thesis › Master's Thesis

  36. 2019
  37. E-pub ahead of print

    The Emergence of Complexity from a Simple Model for Tissue Growth

    Dunlop, J. W. C., Zickler, G., Weinkamer, R., Fischer, F.-D. & Fratzl, P., 14 Dec 2019, (E-pub ahead of print) In: Journal of statistical physics. 2019, December, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Coupled damage variable based on fracture locus: Modelling and calibration

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Nov 2019, In: International journal of plasticity. 126.2020, March, 24 p., 102623.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    E-ASSESSMENT IN ENGINEERING MECHANICS: HOW DOES IT COMPARE TO CLASSICAL PAPER-PENCIL EXAMS?

    Orthaber, M., Antretter, T., Jurisits, R. & Schemmel, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9381-9390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    EXPERIENCES WITH A BLENDED LEARNING CONCEPT IN A FIRST YEAR ENGINEERING MECHANICS COURSE

    Orthaber, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9229-9239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. E-pub ahead of print

    Driving Forces on Dislocations - An Analytical and Finite Element Study

    Kolednik, O., Ochensberger, W., Predan, J. & Fischer, F.-D., 9 Nov 2019, (E-pub ahead of print) In: International journal of solids and structures. 190.2020, May, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Unifcation of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels

    Petersmann, M., Antretter, T., Cailletaud, G., Sannikov, A., Ehlenbröker, U. & Fischer, F.-D., Aug 2019, In: International journal of plasticity. 119.2019, August, p. 140-155 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation of deformation mechanisms in manganese steel crossings using FE models

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    An improved engineering approach to assess crack arrays: an Addendum to Arch. Appl. Mech. 84 (2014) 1325–1337

    Kienzler, R., Fischer, F.-D. & Wessel, A., Apr 2019, In: Archive of applied mechanics. 89.2019, 4, p. 731 - 736 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A numerical modeling strategy for the damage-relevant evaluation of metrologically inaccessible thermo-mechanical milling tool loads

    Nemetz, A., 2019

    Research output: Thesis › Doctoral Thesis

  48. Published

    Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles?

    Hackl, K., Fischer, F.-D., Zickler, G. & Svoboda, J., 2019, In: Journal of the mechanics and physics of solids. 2020, 135, p. 103780-1-6

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip

    Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Tao, Q., Krivec, T., Schingale, A. & Decker, M., 2019, p. 1509-1514.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Damage Tolerance of Lamellar Bone

    Razi, H., Predan, J., Fischer, F.-D. & Fratzl, P., 2019, In: Bone. 130, p. 114102-1-7

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Development of a Simulation Method for the Evaluation of the Driving Dynamics of a Commercial Vehicle with Integrated E-Axle and Leaf Springs

    Bergmayr, T., 2019

    Research output: Thesis › Master's Thesis

  53. Published

    Diffusion-controlled crack propagation in alkali feldspar

    Petrishcheva, E., Rieder, M., Predan, J., Fischer, F.-D., Giester, G. & Abart, R., 2019, In: Physics and Chemistry of Minerals. 46.2019, 1, p. 15-26 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Improvement of the rail milling process & Evaluation of its potential for the reduction of rail defects

    Kubin, W., 2019

    Research output: Thesis › Doctoral Thesis

  56. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F.-D. & Svoboda, J., 2019, In: Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

    Svoboda, J., Yao, S., Kozeschnik, E. & Fischer, F.-D., 2019, In: Scripta materialia. 2019, Vol.168, p. 81-85

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Kristallplastizitätsbasierte Finite Elemente Modellierung mikromechanischer Experimente

    Waldl, H., 2019

    Research output: Thesis › Master's Thesis

  59. Published

    Local Approach for Coarsening of Precipitates

    Svoboda, J., Shan, Y. V., Zickler, G. A., Kozeschnik, E. & Fischer, F.-D., 2019, In: Scripta materialia. 178, p. 232-235

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Modelling of the post-treatment of coating/substrate architectures

    Faksa, L., 2019

    Research output: Thesis › Doctoral Thesis

  61. Published

    Nonlinear material modeling and simulation of thermoplastics

    Morak, M. M., 2019

    Research output: Thesis › Doctoral Thesis

  62. Published

    On Solute Depletion Zones Along Grain Boundaries During Segregation

    Scheiber, D., Svoboda, J., Fischer, F.-D. & Romaner, L., 2019, In: Acta materialia. 182, p. 100-107

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Peak-Profilanalyse für In-situ-Hochtemperaturröntgenbeugung

    Ogris, D., 2019

    Research output: Thesis › Master's Thesis

  64. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K. & Antretter, T., 2019, In: Surface & coatings technology. 380, p. 125026-1-11

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Simulation des dynamischen/akustischen Verhaltens von Steuerkettentrieben

    Grinschgl, M., 2019

    Research output: Thesis › Doctoral Thesis

  67. Published

    Simulation of Phase Transformation and Material Plasticity for Press Hardening

    Tomasch, M., Ecker, W. & Antretter, T., 2019, Proceedings of NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes. p. 362-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Structure and surface energies of nanoparticles

    Holec, D., Fischer, F.-D. & Vollath, D., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    Surface Tension Determines Tissue Shape and Growth Kinetics

    Ehrig, S., Schamberger, B., Bidan, C. M., West, A., Jacobi, C., Lam, K., Kollmannsberger, P., Petersen, A., Tomancak, P., Kommareddy, K., Fischer, F.-D., Fratzl, P. & Dunlop, J. W. C., 2019, In: Science Advances. 2019, 5, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    The Effect of Loading during Martensitic Transformation of a Margaging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

    Petersmann, M., Antretter, T., Sannikov, A., Sartory, B. & Ehlenbröker, U., 2019, In: Practical metallography = Praktische Metallographie. 56, p. 360-372

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Thermally induced stress evolution in a Ti-43.5Al-4Nb-1Mo-0.1B electrode during melting in an atomization process

    Bialowas, J., 2019

    Research output: Thesis › Master's Thesis

  72. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., 2019, In: Intermetallics. 114, p. 106604-1-9

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Wear of dry-running piston rod sealing rings: modelling and experiments

    Kaufmann, A., 2019

    Research output: Thesis › Doctoral Thesis

  74. 2018
  75. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Kinetics of interaction of impurity interstitials with dislocations revisited

    Svoboda, J., Ecker, W., Razumovskiy, V. I., Zickler, G. A. & Fischer, F.-D., Oct 2018, In: Progress in materials science. 101.2019, April, p. 172-206 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 2018, Volume44/III, p. 126-132

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Low temperature heat capacities and thermodynamic functions described by Debye–Einstein integrals

    Gamsjäger, E. & Wießner, M., 25 Jan 2018, In: Monatshefte für Chemie = Chemical monthly. 149, p. 357-368 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    An innovative concept for interstitial diffusion in stressed crystals

    Svoboda, J., Zickler, G. A. & Fischer, F.-D., 2018, In: International journal of solids and structures. p. 173-180

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    An In-Situ LSCM Study on Bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In: Metals : open access journal . 8, 498, p. 1-22 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Anisotropy of Interstitial Diffusion in bcc-crystals due to Stress-Induced Unequal Occupancies of Different Types of Sites

    Svoboda, J. & Fischer, F.-D., 2018, In: International journal of solids and structures. 152-153, p. 66-70

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Crystallography-microstructure-relations of hierarchical lath martensite from a micromechanical point of view

    Petersmann, M., 2018

    Research output: Thesis › Doctoral Thesis

  87. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten

    Goel, S., Cross, G., Stukowski, A., Gamsjäger, E., Beake, B. & Agrawal, A., 2018, In: Computational materials science. 152, p. 196-210 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Development of an automated preprocessor for the micromechanical modeling of foundry sands

    Ralph, B., 2018

    Research output: Thesis › Master's Thesis

  90. Published

    Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 2018, In: Archive of applied mechanics. 88, p. 453-460

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  92. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Grain growth controlled by grain boundary and boundary junction migration

    Ogris, D. & Gamsjäger, E., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Influene of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 2018, In: Scripta materialia. 146, p. 225-259

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Kinetics of grain boundary networks controlled by triple junction and grain boundary mobility

    Gamsjäger, E., Ogris, D. & Svoboda, J., 2018, In: Metals : open access journal . 8, 977, p. 1 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Kinetics of Grain Boundary Segregation in Multicomponent Systems – The Example of a Mo-C-B-O System

    Scheiber, D., Romaner, L., Fischer, F.-D. & Svoboda, J., 2018, In: Scripta materialia. 150, p. 110-114 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Numerical Analysis of Residual Stress and Crack Networks in CVD Multilayer Coated Cutting Tools

    Velic, D., 2018

    Research output: Thesis › Master's Thesis

  100. Published

    Surface energy of nanoparticles - influence of particle size and structures

    Vollath, D., Fischer, F.-D. & Holec, D., 2018, In: Beilstein journal of nanotechnology (Online-Ressource). 2018, 9, p. 2265-2276 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    The Influence of the Leveling Process on the Local Material Properties of Heavy Steel Plates

    Kaltenbrunner, T., 2018

    Research output: Thesis › Doctoral Thesis

  102. 2017
  103. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  104. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., Nov 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. Published

    From microstructural characterization to mechanical properties of steels - An in-situ X-ray diffration study

    Gamsjäger, E. & Wießner, M., Jun 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001