Montanuniversität

Organisational unit: University

651 - 700 out of 30,152Page size: 50

Publications / Theses

  1. 2021
  2. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 2021, In: Surface & coatings technology. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High-temperature high-pressure SCC testing of corrosion-resistant alloys

    Galakhova, A., Mori, G. K. & Prattes, K., 2021, In: Materials and Corrosion.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., 2021, In: Materialia. 2021, 16, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance

    Koutná, N., Brenner, A., Holec, D. & Mayrhofer, P. H., 2021, In: Acta materialia. 2021, 206, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, p. 1-11 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Hybrid Model for Detecting Abnormal Drilling Behaviors

    Lindner, A., 2021

    Research output: Thesis › Master's Thesis

  8. Published

    Hydrothermal alteration can result in pore pressurization and volcano instability

    Heap, M. J., Baumann, T., Gilg, H. A., Kolzenberg, S., Ryan, A., Villeneuve, M., Russell, K., Kennedy, L., Rosas-Carbajal, M. & Clynne, M., 2021, In: Geology.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Identifikation neuer Märkte zur wirtschaftlichen Verwendung vom Nebenprodukt „Nanopartikel“ aus der Metallpulverproduktion

    Brandner, K., 2021

    Research output: Thesis › Master's Thesis

  10. Published

    Impact of Conditioning Processes on the Performance of Rotating Anodes

    Sommerauer, M., 2021

    Research output: Thesis › Master's Thesis

  11. Published

    Impact of Covid‐19 on the Mining Sector and Raw Materials Security in Selected European Countries

    Galas, A., Kot‐Niewiadomska, A., Czerw, H., Simic, V., Tost, M., Warell, L. & Galas, S., 2021, In: Resources. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 2021, 100, p. 91-100

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Impact of the stacking sequence on the stability of transition-metal diborides

    Leiner, T., 2021

    Research output: Thesis › Master's Thesis

  14. Published

    Implementierung eines Low-Cost Human-Machine Interfaces in ein Cyber Physical Production System

    Messner, F., 2021

    Research output: Thesis › Master's Thesis

  15. Published

    Improved fracture resistance of Cu/Mo bilayers with thickness tailoring

    Cordill, M. J., Jörg, T., Többens, D. & Mitterer, C., 2021, In: Scripta materialia. 2021, 202, p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Improvement of the Utilization Versatility of High Chromium, Manganese and Phosphorus Basic Oxygen Furnace Slags by Carbo-thermal Reduction

    Breuer, F., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 2021, 112, p. 262-270

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 417, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Influence of microalloying elements and deformation parameters on the recrystallization and precipitation behavior of two low-alloyed steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., 2021, In: Steel research international. 2021, 2100065, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy

    Ibanez-Perez, J., No, M. L., Oehring, M., Clemens, H. & San Juan, J. M., 2021, In: Journal of alloys and compounds. 2021, 867, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of Nd-substitution on (La,Ca)FeO3 perovskites with regard to application in solid oxide fuel cell cathodes

    Bucher, E., Berger, C., Lammer, J., Nader, C. & Sitte, W., 2021, KERAMIK 2021- 96. Jahrestagung der Deutschen Keramischen Gesellschaft.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., 2021, In: Materialia. 2021, 15, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of Slag Viscosity and Composition on the Inclusion Content in Steel

    You, D., Bernhard, C., Mayerhofer, A. & Michelic, S. K., 2021, In: ISIJ international. 61, 12, p. 2991-2997

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Influence of the heat input on the dentritic solidification structure and the mechanical properties of 2.25Cr-1Mo-0,25V submerged-arc weld metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 2021, In: Journal of Materials Engineering and Performance. p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of the silver content on mechanical properties of Ti-Cu-Ag thin films

    Rashid, S., Sebastiani, M., Mughal, Z. M., Daniel, R. & Bemporad, E., 2021, In: Nanomaterials. 2021, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of Y-substitution on crystal structure and proton uptake of self-generated Ba(Ce,Fe)O3-δ-Ba(Fe,Ce)O3-δ nanocomposites

    Berger, C., Lammer, J., Nader, C., Bucher, E., Grogger, W., Merkle, R., Maier, J. & Sitte, W., 2021, 2021 Spring Meeting of the European Materials Research Society (E-MRS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 2021, In: Surface & coatings technology. 2021, 406, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    In situ investigation of the rapid solidification behavior of intermetallic γ-TiAl-based alloys using high-energy X-ray diffraction

    Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 2021, In: Advanced Engineering Materials. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    In situ TEM observation of phase transformation in bulk metallic glass composites

    Sheng, H., Zhang, L., Zhang, H., Wang, J., Eckert, J. & Gammer, C., 2021, In: Materials Research Letters. 9, 4, p. 190-195 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Integration of an automated gas distribution station of a new generation

    Pestov, P., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Interim Report for the Activities of the First Half Year 2021A | Austrian branch Centre Mining Education UNESCO

    Voica, A., Brandl, J., Trettler, M. & Kucheryavaya, A., 2021, 52 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Investigating novel concepts to characterize the resistance against rapid crack propagation of polyamide 12 pipe grades

    Waly, C., 2021

    Research output: Thesis › Master's Thesis

  35. Published

    Investigation of Coal Pore Structure and Methane Adsorption and Diffusion Capacities Based on SAXS and Nano-CT

    Han, C., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Investigation of the crude oil/brine interaction through interfacial viscoelasticity and microdispersion

    Nazifi, P., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Jet pump performance analysis and optimization plan

    Khammassi, C., 2021

    Research output: Thesis › Master's Thesis

  39. Published

    Konzeption eines Referenzmodells für ein Warehouse Management System

    Kaufmann, K., 2021

    Research output: Thesis › Master's Thesis

  40. Published

    Lean Improvement of Fenghuangshan silver mine's Beneficiation Process Based on Value Stream Map

    Li, L., 2021

    Research output: Thesis › Master's Thesis

  41. Published

    Leveraging Iterative Plan Refinement for Reactive Smart Manufacturing Systems

    Wally, B., Vyskocil, J., Novak, P., Huemer, C., Sindelar, R., Kadera, P., Mazak-Huemer, A. & Wimmer, M., 2021, In: IEEE transactions on automation science and engineering. 18, 1, p. 230-243 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Lithium-Ionen-Batterien – Kreislaufwirtschaftliche Herausforderungen am Ende des Lebenszyklus und im Recycling

    Altendorfer, M., Nigl, T., Rutrecht, B., Scherhaufer, S., Meyer, I., Sommer, M. & Beigl, P., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 2021, Vol. 166, p. 144-149

    Research output: Contribution to journal › Article › Research

  43. Published

    LSTM Hyperparameter Optimization: Impact of the Selection of Hyperparameters on Machine Learning Performance when applied to Time Series in Physical Systems

    Terbuch, A., 2021

    Research output: Thesis › Master's Thesis

  44. Published

    Machine Learning and KPI Analysis applied to Time-Series Data in Physical Systems: Comparison and Combination

    Haider, M., 2021

    Research output: Thesis › Master's Thesis

  45. Published

    Machine Learning Application in Early Stuck Pipe Sign Detection by Real-time Monitoring Surface Drilling Parameters

    Kobets, V., 2021

    Research output: Thesis › Master's Thesis

  46. Published

    Magnetostrictive behavior of severe plastically deformed, nanocrystalline materials

    Paulischin, A. B., 2021

    Research output: Thesis › Master's Thesis

  47. Published

    Managed pressure casing drilling analysis for an appraisal well in Jordan

    Al Hmoud, A., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    Mechanical Constitution of Stable and Metastable Phases in Cu20Sn

    Lumper, L., 2021

    Research output: Thesis › Master's Thesis

  49. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Mechanische und thermische Simulation eines Formel 1 Einzylinder-Prüfstandsmotors bei extrem hohen Spitzendrücken

    Kübler, P., 2021

    Research output: Thesis › Master's Thesis

  51. Published

    Messung der Strömungsgeschwindigkeiten in Querschnitten von zwei Tunnelbauwerken

    De Monte, P., 2021

    Research output: Thesis › Master's Thesis

Previous 1...10 11 12 13 14 15 16 17 ...604 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402