Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

201 - 300 out of 2,143Page size: 100

Publications / Theses

  1. 2019
  2. Published

    KryoAlu2: Abschlussbericht

    Gruber, B., 7 Feb 2019

    Research output: Book/Report › Commissioned report › Research

  3. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    First results Co(W)-Zn tests and structure analysis β1

    Ebner, T., 30 Jan 2019

    Research output: Book/Report › Commissioned report › Research

  5. Published

    Solventextraktion und Elektrolyse von Kobalt und Nickel: Literaturbericht

    Gerold, E., 22 Jan 2019

    Research output: Book/Report › Other report › Research

  6. Published

    "2sDR" An innovative mini mill concept for EAF-dust recycling

    Auer, M., Antrekowitsch, J. & Hanke, G., 2019, WASTES - solutions, treatments. opportunities.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    Assessment of by-products - from waste to values

    Schatzmann, W. & Antrekowitsch, J., 2019, Wastes: Solutions, Treatment and Opportunities. Lisbon, Portugal, p. 506-511

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Auswirkung der Tieftemperaturumformung auf die Aushärtungskinetik von AlMgSi- Legierungen

    Jeglitsch, L., 2019

    Research output: Thesis › Master's Thesis

  9. Published

    Clustering and diffusion in aluminium alloys

    Dumitraschkewitz, P., 2019

    Research output: Thesis › Doctoral Thesis

  10. Published

    Decrease of oxygen content in the solid residue from recycled drill bits

    Sobotka, E., 2019

    Research output: Thesis › Master's Thesis

  11. Published

    Einfluss von Wärmebehandlungen auf statische und dynamische Eigenschaften sowie das Korrosionsverhalten von Al-Legierungen

    Geißler, T., 2019

    Research output: Thesis › Master's Thesis

  12. Published

    Entwicklung hoher Zinkauflagen auf kontinuierlich feuerverzinktem Breitband

    Weilguni, P. T., 2019

    Research output: Thesis › Master's Thesis

  13. Published

    FFG-Endbericht Prozessoptimierung

    Wibner, S. & Antrekowitsch, H., 2019

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Fortschritte in der Aushärtung von Aluminiumlegierungen

    Pogatscher, S., Uggowitzer, P. & Fragner, W., 2019, In: Dialog : Materialwissenschaft und Werkstofftechnik .

    Research output: Contribution to journal › Article › Research

  15. Published

    Grundlagen eines semidirekten Recyclingprozesses für Hartmetalle

    Kücher, G., 2019

    Research output: Thesis › Doctoral Thesis

  16. Published

    Herstellung von Molybdänpulvern mit besonderen Eigenschaften

    Bolitschek, J., 2019

    Research output: Thesis › Doctoral Thesis

  17. Published

    Mikrostruktur- und Ausscheidungscharakterisierung von Al-Mg-Mn-Legierungen

    Zwittnig, L., 2019

    Research output: Thesis › Master's Thesis

  18. Published

    Neue Aluminiumlegierungen für superplastische Umformoperationen

    Pölzl, J., 2019

    Research output: Thesis › Master's Thesis

  19. Published

    Optimierte AlMgMn-Legierungen für die Anwendungen im Automobilbau

    Ebenberger, P., 2019

    Research output: Thesis › Doctoral Thesis

  20. Published

    Recycling of chromium-containing residues from the stainless steel industry with a focus on the reduction kinetics

    Leuchtenmüller, M., 2019

    Research output: Thesis › Doctoral Thesis

  21. Published

    Thermodynamic stability of a nanocrystalline highly concentrated solid solution alloy

    Tunes, M. A., Greaves, G., Kremmer, T., Schön, C. G., Pogatscher, S., Rack, P. D., Donnelly, S. E. & Zhang, Y., 2019, Intermetallics: Proceedings. 1 ed. Bad Staffelstein, Vol. 1. p. 200-201 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Treatment of Precipitation Residues from Zinc Industry with Special Focus on Possible Beneficiation Steps

    Hanke, G., Antrekowitsch, J. & Bernhart, W., 2019, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 72, 6

    Research output: Contribution to journal › Article › Research

  23. Published

    Untersuchung der Reaktionskinetik beim Recycling von Stahlwerksstaub

    Brandner, U., 2019

    Research output: Thesis › Master's Thesis

  24. Published

    Untersuchung des Reduktionsverhaltens einer Pb/Zn-haltigen Schlacke

    Dornig, C., 2019

    Research output: Thesis › Master's Thesis

  25. Published

    Untersuchung des Schmelzverhaltens von Schlacken beim pyrometallurgischen Tantalrecycling unter Berücksichtigung von Additiven

    Lasch, T., 2019

    Research output: Thesis › Master's Thesis

  26. Published

    Untersuchungen des Schichtwachstums im Co(W)-Zn-System

    Körbler, N., 2019

    Research output: Thesis › Master's Thesis

  27. Published

    Werkstofforientierte Grundlagenforschung bleifreier Zinnlegierungen

    Scheiber, S., 2019

    Research output: Thesis › Doctoral Thesis

  28. 2018
  29. Published

    1st periodic report - RFCS Project Fines2EAF - Cement-free brick production technology for the use of primary and secondary raw material fines in EAF steelmaking

    Steinlechner, S., Echterhof, T., Williams, T., Preiß, S., Omran, M., Mudersbach , D., Griessacher , T. & Mombelli, D., 31 Dec 2018, 46 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Developing a new process to agglomerate secondary raw material fines for recycling in the electric arc furnace – the Fines2EAF project

    Echterhof T., T. Willims, S. Preiß, M. Omran, T. Fabritius, D. Mombelli, C. Mapelli, I. Unamuno, D. Mudersbach und T. Griessacher & Steinlechner, S., 29 Nov 2018.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Literaturbericht - Entwicklung hochfester Al-Mg-Si-Legierungen

    Schmid, F., 1 Nov 2018

    Research output: Other contribution › Research

  32. Published

    Zwischenbericht Projekt HYDRA

    Gerold, E., 31 Oct 2018

    Research output: Book/Report › Commissioned report › Research

  33. Published

    Texturanalyse und Einfluss der Textur auf Werkstoffeigenschaften von Aluminiumlegierungen

    Grasserbauer, J., 29 Oct 2018

    Research output: Other contribution › Research

  34. Published

    METHOD FOR REMOVING FLUORIDE FROM A ZINC-CONTAINING SOLUTION OR SUSPENSION, DEFLUORIDATED ZINC SULFATE SOLUTION AND USE THEREOF, AND METHOD FOR PRODUCING ZINC AND HYDROGEN FLUORIDE OR HYDROFLUORIC ACID

    Ludewig, F. (Inventor), Steinlechner, S. (Inventor) & Antrekowitsch, J. (Inventor), 11 Oct 2018, IPC No. C22B 19/ 30 A I, Patent No. CA3092484, Priority date 6 Apr 2017, Priority No. WO2017EP58303

    Research output: Patent

  35. Published

    VERFAHREN ZUM ENTFERNEN VON FLUORID AUS EINER ZINKHALTIGEN LÖSUNG BZW. SUSPENSION, ENTFLUORIDIERTE ZINKSULFAT-LÖSUNG UND DEREN VERWENDUNG SOWIE VERFAHREN ZUR HERSTELLUNG VON ZINK UND VON FLUORWASSERSTOFF BZW. FLUSSSÄURE

    Ludewig, F. (Inventor), Steinlechner, S. (Inventor) & Antrekowitsch, J. (Inventor), 11 Oct 2018, IPC No. C22B 19/ 30 A I, Patent No. WO2018184686, Priority date 6 Apr 2017, Priority No. WO2017EP58303

    Research output: Patent

  36. Published

    KryoAlu2: EBSD-Messungen und Erholung

    Gruber, B., 8 Oct 2018

    Research output: Book/Report › Commissioned report › Research

  37. Published

    KPIs of the waelz process

    Steinlechner, S., 1 Oct 2018

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Untersuchung des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in-und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 1 Oct 2018, In: Praktische Metallographie/Practical Metallography. 55, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Endbericht - FFG Projekt RessouRec (Research Studio Austria)

    Steinlechner, S., Leuchtenmüller, M., Wegscheider, S. & Benigni, C., 31 Aug 2018, 21 p.

    Research output: Book/Report › Commissioned report › Research

  40. Published

    Influence of substrate properties on the selective leaching performance of Co from cemented carbides

    Kücher, G., 27 Aug 2018.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Influence of Substrate Properties on the Selective Leaching Performance of Cobalt from Cemented Carbides

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 25 Aug 2018, Proceedings of the First Global Conference on Extractive Metallurgy. p. 2829 2836 p. VII

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 20 Jul 2018, In: Revista matéria. 23.2018, 2, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

    Mödlinger, M., Cziegler, A., Macció, D., Schnideritsch, H. & Sabatini, B., 10 Jul 2018, (E-pub ahead of print) In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 2018, 49/5, p. 2505-2513 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction

    Bolitschek, J., Luidold, S. & O`Sullivan, M., 18 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction

    Bolitschek, J., Luidold, S. & O`Sullivan, M., 18 Jun 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    Lüders-Dehnung und Fließfiguren in 5xxx Aluminiumlegierungen

    Ebenberger, P., 13 Jun 2018.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Determination of free aluminum content in dross by using liquid salt slag in a TBRC

    Wibner, S., 24 May 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Impact on Co lixiviation selectivity in CH2O2 by cemented carbide substrate parameters

    Kücher, G., 24 May 2018.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Influence of TiO2 concentration on the viscosity of SynCon slags

    Hofer, D., 24 May 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Determination of free aluminum content in dross by using liquid salt slag in a TBRC

    Wibner, S., 22 May 2018.

    Research output: Contribution to conference › Abstract › peer-review

  51. Published

    Influence of TiO2 concentration on the viscosity of SynCon slags

    Hofer, D., 22 May 2018.

    Research output: Contribution to conference › Abstract › peer-review

  52. Published

    Thermodynamic considerations for a pyrometallurgical extraction of indium and silver from a jarosite residue

    Steinlechner, S. & Antrekowitsch, J., 9 May 2018, In: Metals : open access journal . 8, 5, 335.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Effects of zinc addition on microstructure of SnCu3.5Ni0.3 alloy

    Scheiber, S. & Antrekowitsch, H., 4 May 2018, Conference Proceedings of the 25th International Student’s Day of Metallurgy. p. 181-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Alternative Verwertungsstrategien für sekundäre Zinkkonzentrate

    Benigni, C., 20 Apr 2018, 173 p.

    Research output: Thesis › Doctoral Thesis

  55. Published

    KryoAlu2: Versuchslegierungen Charakterisierung

    Gruber, B., 10 Apr 2018

    Research output: Book/Report › Commissioned report › Research

  56. Published

    Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition

    Spierings, A. B., Dawson, K., Dumitraschkewitz, P., Pogatscher, S. & Wegener, K., 1 Mar 2018, In: Additive Manufacturing. 20, p. 173-181 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    FFG Endbericht E²CGS

    Bolitschek, J., 21 Feb 2018

    Research output: Book/Report › Commissioned report › Transfer

  58. Published

    A study of the impact of reduction conditions on molybdenum morphology

    Bolitschek, J., Luidold, S. & O'Sullivan, M., Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Entwicklung eines neuen Aufarbeitungsverfahrens für Salzschlacken

    Angerer, T., 10 Jan 2018.

    Research output: Contribution to conference › Poster › Research

  60. Published

    Characterisation and pyrometallurgical recycling of jarosite type residues out of zinc primary metallurgy

    Hanke, G. & Antrekowitsch, J., 1 Jan 2018, In: World of Metallurgy - ERZMETALL. 71, 1, p. 25-30 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Characterisation and Pyrometallurgical Recycling of Jarosit Type Residues out of Zinc primary Metallurgy

    Hanke, G. & Antrekowitsch, J., Jan 2018, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 71; 1/2018, p. 25-30 6 p.

    Research output: Contribution to journal › Article › Research

  62. Published

    Phase Reactions Between Refractory and High-Acidic Synthetic CaO-Ferronickel Slag

    Sagadin, C., Luidold, S., Wagner, C., Spanring, A. & Kremmer, T., Jan 2018, In: JOM. p. 34-40 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Analyse von Al-Cu-Briketts der Fa. Saubermacher Dienstleistungs AG

    Wibner, S. & Antrekowitsch, H., 2018

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Aufarbeitung von Jarosit und Elektrolichtbogenofenstaub in einem kombinierten Verfahren zur Rückgewinnung von Wertmetallen

    Wegscheider, S., 2018

    Research output: Thesis › Doctoral Thesis

  65. Published

    Bestimmung des Aluminiumgehaltes von Krätzen (Alu neu, Alu gemischt) der Hütte Klein-Reichenbach durch Schmelzen mit Salz im TBRC

    Wibner, S., 2018

    Research output: Book/Report › Commissioned report › Research

  66. Published

    Bestimmung des Aluminiumgehaltes von Krätzen der Hütte Klein-Reichenbach durch Schmelzen mit Salz im TBRC

    Wibner, S., 2018

    Research output: Book/Report › Commissioned report › Research

  67. Published

    Characterization and process development for the selective removal of sn, sb, and as from anode slime obtained from electrolytic copper refining

    Steinlechner, S., 2018, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 54.2018, 1, p. 81-89 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Charakterisierung der Eigenschaften eines neuen Verbundwerkstoffes

    Steiner, C., 2018

    Research output: Thesis › Master's Thesis

  69. Published

    Charakterisierung von Wälzschlacke als Vorarbeit zum reststofffreien Recycling

    Höber, L., 2018

    Research output: Thesis › Master's Thesis

  70. Published

    Der Weg vom Müllverbrennungsrückstand zum Sekundärrohstoff

    Pfandl, K., Höllen, D., Zöhrer, M., Pomberger, R. & Antrekowitsch, H., 2018, Österreichische Abfallwirtschaftstagung 2018: TrenntWende. Ö. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Desintegrationsverhalten von Hartmetallen im Zuge des Zinkprozesses

    Krenn, A., 2018

    Research output: Thesis › Master's Thesis

  72. Published

    Determination of the High Temperature Melting Behaviour of Synthetic Ferronickel Slags

    Sagadin, C., Luidold, S., Wagner, C. & Spanring, A., 2018, Sustainable Industrial Processing Summit & Exhibition: Non-ferrous Smelting & Hydro/Electrochemical Processing.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  73. Published

    FFG-Bericht Prozessoptimierung

    Wibner, S. & Antrekowitsch, H., 2018

    Research output: Book/Report › Commissioned report › Research

  74. Published

    Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2018

    Ebner, T., Sagadin, C. & Wibner, S., 2018, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 71.2018, 6, p. 344-346 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  76. Published

    High temperature characteristics of slags originating from the production of synthetic tantalum concentrate

    Hofer, D., Luidold, S., Beckmann, T. & Schulenburg, F., 2018.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    High temperature characteristics of slags originating from the production of synthetic tantalum concentrate

    Hofer, D., Luidold, S., Beckmann, T. & Schulenburg, F., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  78. Published

    High Temperature Corrosion of Magnesia based Refractory by Ferronickel Slags

    Sagadin, C. & Luidold, S., 2018.

    Research output: Contribution to conference › Poster › Research

  79. Published

    High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production

    Sagadin, C., Luidold, S. & Wagner, C., 2018.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Hydrometallurgical Treatment of an Atomized Copper Alloy Gained from WEEE

    Sorger, C., Luidold, S. & Konetschnik, S. J., 2018, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 71.2018, 4, p. 208-213 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Influence of several Oxides on the Melting Behaviour of Ferronickel Slags

    Sagadin, C., Luidold, S., Wagner, C. & Spanring, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  82. Published

    Influence of substrate stiffness and of PVD parameters on the microstructure and tension fracture characteristics of TiN thin films

    da Silva, F. C., Tunes, M. A., Sagás, J. C. & Schön, C. G., 2018, In: Procedia structural integrity / ESIS. 13, p. 658-663 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Invenstigation of the Precipitation Behavior of H-Carbides in a TiAI Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 10, p. 693-703

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Kryogene Verformung von Aluminiumlegierungen

    Gruber, B., 2018.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Lixiviation kinetics of cobalt from cemented carbides

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 2018, In: International journal of refractory metals & hard materials. 70, Supplement C, p. 239-245 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Mass and Energy Balance of an EAF for Tantalum Recycling

    Schnalzger, G., 2018

    Research output: Thesis › Master's Thesis

  87. Published

    Optimierung der Wärmebehandlung für ausgewählte Legierungen im Al-Mg-Zn-Cu System

    Mitas, B., 2018

    Research output: Thesis › Master's Thesis

  88. Published

    Process development and opimization for the extraction of minor elements from industrial residues and by-products

    Steinlechner, S., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  89. Published

    Process development for the recycling of oil and gas drilling tools

    Kerschbaumer, C., 2018

    Research output: Thesis › Doctoral Thesis

  90. Published

    Prozessentwicklung zur metallurgischen Verwertung von Elektroaltgeräten

    Sorger, C., 2018

    Research output: Thesis › Doctoral Thesis

  91. Published

    Pyrometallurgical processing and slag analysis of WEEE

    Sorger, C., 2018, SIPS2017_CD.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Reduktionsversuche von Rotschlamm unter Einstellung einer gewünschten Schlackenzusammensetzung

    Wibner, S., Antrekowitsch, H. & Scheiber, S., 2018

    Research output: Book/Report › Commissioned report › Research

  93. Published

    Schlackenmetallurgie von Ferrolegierungen

    Sagadin, C., 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  94. Published

    Schmelzversuche im Labormaßstab für unterschiedliche Schrottsorten der Hütte-Kleinreichenbach

    Wibner, S., 2018

    Research output: Book/Report › Commissioned report › Research

  95. Published

    Schmelzversuche von Fensterrahmen-Schrotten

    Wibner, S., 2018

    Research output: Book/Report › Commissioned report › Research

  96. Published

    Tungsten dissolution in nitric acid solution in the presence of iron

    Winkler, S., 2018

    Research output: Thesis › Master's Thesis

  97. 2017
  98. Published

    Upgrade of a Double Leached Waelz Oxide to a high purity Zinc Oxide product - Pilot scale trials

    Steinlechner, S., 20 Dec 2017

    Research output: Book/Report › Commissioned report › Research

  99. Published

    CuCr(Zr)-Legierungen: Kurzstudie

    Scheiber, S. & Antrekowitsch, H., 27 Nov 2017, 14 p.

    Research output: Book/Report › Other report › Research

  100. Published

    Cu-Proben: Kurzanalyse

    Scheiber, S. & Antrekowitsch, H., 27 Nov 2017, 15 p.

    Research output: Book/Report › Commissioned report › Research

  101. Published

    Entwicklung eines neuen Aufarbeitungsverfahrens für Salzschlacken

    Angerer, T., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  102. Published

    Kryogene Verformung von Al

    Gruber, B., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 82

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  103. Published

    Legierungsdesign auf Zinnbasis

    Scheiber, S., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 5204