Chair of Mechanics (400)

Organisational unit: Chair

151 - 200 out of 699Page size: 50

Publications / Theses

  1. 2016
  2. Published

    A Self-Consistent Model for Thermodynamics of Multicomponent Solid Solutions

    Svoboda, J. & Fischer, F. D., 2016, In: Scripta materialia. p. 154-157

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A thermokinetic model for Mg-Si couple Formation in Al-Mg-Si alloys

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2016, In: Modelling and simulation in materials science and engineering. 24, p. 035021-1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Numerical study of microwave induced stress and damage formation in heterogeneous rocks

    Toifl, M., 2016

    Research output: Thesis › Doctoral Thesis

  15. Published

    Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

    Svoboda, J., Fischer, F. D., Riedel, H. & Kozeschnik, E., 2016, In: International journal of plasticity. 82, p. 112 126 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Simulation and optimization of the in-service behavior of coated inserts for turning and milling

    Krajinovic, I., 2016

    Research output: Thesis › Doctoral Thesis

  17. Published

    Simulation des Freiformbiegens von Profilrohren im Automobilbau

    Beulich, N. V., 2016

    Research output: Thesis › Master's Thesis

  18. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    The Mechanics of Tessellations - Bioinspired Strategies for Fracture Resistance

    Fratzl, P., Kolednik, O., Fischer, F. D. & Dean, M. N., 2016, In: Chemical Society Reviews. 45, 2, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Thermomechanische Simulation des Härteprozesses von wärmebehandelten Grobblechen

    Bacher, B., 2016

    Research output: Thesis › Master's Thesis

  21. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2015
  23. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Calculating entropies of alkaline earth metal molybdates

    Gamsjäger, E., Morishita, M. & Gamsjäger, H., 18 Nov 2015, In: Monatshefte für Chemie = Chemical monthly.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröcker, U. & Petersmann, M., 10 Oct 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Evolution of reverted austenite and martensite during thermal processing of chromium stainless steels

    Gamsjäger, E., Wiessner, M., Gruber, M. & van der Zwaag, S., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Analysis of the mobility of migrating austenite-ferrite interfaces

    Gamsjäger, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 28 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 28 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. E-pub ahead of print

    A New Self-Consistent Model for Thermodynamics of Binary Solutions

    Svoboda, J., Shan, Y. V. & Fischer, F. D., 15 Jun 2015, (E-pub ahead of print) In: Scripta materialia. 108.2015, November, p. 27-30 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers Inc., 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Characterization of stainless steels by means of high temperature X-­ray diffraction

    Gamsjäger, E., Wiessner, M. & Angerer, P., 30 Apr 2015, Stainless Steel Conference 2015-Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Stress, deformation and diffusion interactions in solids - A simulation study

    Fischer, F. D. & Svoboda, J., 26 Feb 2015, In: Journal of the mechanics and physics of solids. 78, p. 427-442 16 p., 2612.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  42. Published

    Analysis of the mobility of migrating austenite–ferrite interfaces

    Gamsjäger, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 2015, In: Philosophical magazine. 95:26, p. 2899-2917

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., 2015, In: Key engineering materials. 651-653, p. 363 368 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R. & Antretter, T., 2015, In: Journal of Microelectronics and Electronic Packaging. 12, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pélisset, T., 2015, In: The Journal of Strain Analysis for Engineering Design. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Degradation analysis of thin die-attach layer under cyclic thermal load in microelectronics packaging

    Pelisset, T. M. A., 2015

    Research output: Thesis › Doctoral Thesis

  47. Published

    Degradation of the electrical performance of Printed Circuit Boards (PCBs) after cyclic thermo-mechanical loading

    Fellner, K., 2015

    Research output: Thesis › Doctoral Thesis

  48. Published

    Elucidating the Sorption Mechanism of Dibromomethane in Disordered Mesoporous Silica Adsorbents

    Stoeckel, D., Wallacher, D., Zickler, G., Thommes, M. & Smarsly, B., 2015, In: Langmuir.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Generalized Gaussian Error Functions and their Applications

    Dirschmid, H. & Fischer, F. D., 2015, In: Acta mechanica. 226, p. 2887 2897 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001