Chair of Materials Physics (430)

Organisational unit: Chair

701 - 800 out of 1,619Page size: 100

Publications / Theses

  1. 2015
  2. Published

    Fracture and fracture toughness of nanopolycrystalline metals produced by SPD

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Fracture in severely plastically deformed metals - How toughness can be improved

    Hohenwarter, A., Völker, B., Leitner, T., Renk, O. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Fracture resistance of pearlitic steels

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    How Residual Stresses Affect the Fracture Properties of Layered Thin Films

    Kiener, D., Treml, R., Kozic, D., Zalesak, J., Zechner, J., Keckes, J., Schöngrundner, R., Gänser, H.-P. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Improved electro-mechanical performance of gold films on polyimide without adhesion layers

    Putz, B., Schoeppner, R., Glushko, O., Bahr, D. F. & Cordill, M., 2015, In: Scripta materialia. p. 23-26

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of Residual Stresses on the Fracture Properties of Multilayer Films

    Kiener, D., Treml, R., Kozic, D., Zechner, J., Maeder, X., Schöngrundner, R. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Local Determination of Residual Stresses and Fracture Properties Using In-situ Testing in the SEM

    Kiener, D., Treml, R., Kozic, D., Schöngrundner, R. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mechanical property enhancement in laminates through control of morphology and crystal orientation

    Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mechanische Eigenschaften hochverformter Titanlegierungen

    Jäger, N., 2015

    Research output: Thesis › Diploma Thesis

  15. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

    Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Nanoindentation of ultrafine grained and single crystalline Chromium and Tantalum at elevated temperatures

    Pörnbacher, J., 2015, 132 p.

    Research output: Thesis › Diploma Thesis › peer-review

  18. Published

    Nanomechanische Verformungsprozesse – In situ Erkenntnisse aus dem Transmissionselektronenmikroskop

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Novel methods for the site specific preparation of micromechanical structures

    Wurster, S., Treml, R., Fritz, R., Kapp, M. W., Langs, E., Alfreider, M., Ruhs, C., Imrich, P. J., Felber, G. & Kiener, D., 2015, In: Practical metallography = Praktische Metallographie. 52, 3, p. 131-146 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Pencil-beam X-ray nanodiffraction on CVD α-Al2O3 hard coatings with grain sizes in the micrometer range

    Tkadletz, M., Keckes, J., Schalk, N., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Probing thermally activated properties on a local scale

    Kiener, D., Leitner, A. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Quantitative testing in the electron microscope - Insights into small scale plasticity

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Quantitative testing in the electron microscope – Insights into small scale plasticity

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Recent developments in miniaturized fracture testing in the SEM and TEM

    Kiener, D., Treml, R., Kozic, D., Schöngrundner, R., Hintsala, E. & Gerberich, W. W., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior

    Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Recent Progress in Printed 2/3D Electronic Devices

    Klug, A., Popovic, K., Blümel, A., Sax, S., Lenz, M., Glushko, O., Cordill, M. & List-Kratochvil, E. J. W., 2015, Proceedings of SPIE: Printed Memory and Circuits. Vol. 9569.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  29. Published

    Recovery phenomena in severely deformed metals

    Renk, O., 2015

    Research output: Thesis › Doctoral Thesis

  30. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Residual stress gradients in α-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134 - 140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Resolving depth evolution of microstructure and hardness in sputtered CrN film

    Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Rissfortschritt in duktilen Stählen unter zyklischer Belastung: Einfluss des Herstellungsverfahrens und der Lastgeschichte

    Zhou, X., 2015

    Research output: Thesis › Doctoral Thesis

  34. Published

    Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films

    Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    TEM investigations on interactions of dislocations with boundaries

    Imrich, P. J., 2015

    Research output: Thesis › Doctoral Thesis

  36. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Texturentwicklung nanokristalliner W-Cu Komposite

    Rodriguez Chavez, A., 2015

    Research output: Thesis › Diploma Thesis

  38. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Thermal expansion of rock-salt cubic AlN

    Bartosik, M., Todt, M., Holec, D., Todt, J., Zhou, L., Riedl, H., Böhm, H. J., Rammerstorfer, F. G. & Mayerhofer, P. H., 2015, In: Applied physics letters. 107, p. 071602-1 - 071602-5

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Thermo-mechanical properties of fine grained materials: Porous vs. crystalline vs. Composite

    Kiener, D., Kreuzeder, M., Primorac, M.-M., Leitner, A., Abad, M. D., Hosemann, P. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Thermo-mechanical properties of ultra-fine grained fcc-bcc composites

    Maier-Kiener, V., Primorac, M.-M., Leitner, A., Kreuzeder, M. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Young's Modulus and Poisson's Ratio Characterization of Tungsten Thin Films via Laser Ultrasound

    Grünwald, E., Nuster, R., Treml, R., Kiener, D., Paltauf, G. & Brunner, R., 2015, In: Materials Today: Proceedings. 2, p. 4289-4294

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Zukunft der Metalle

    Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. 2014
  46. Published

    Elastostatic reversibility in thermally formed bulk metallic glasses: Nanobeam diffraction fluctuation electron microscopy

    Sarac, B., Gammer, C., Deng, L., Park, E., Yokoyama, Y., Stoica, M. & Eckert, J., 4 Dec 2014, In: Nanoscale. 10.2018, 3, p. 1081-1089 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Extreme ductility at the nanoscale in Fe-based alloys

    Hintsala, E., Kiener, D. & Gerberich, W. W., 1 Aug 2014, In: Microscopy and microanalysis. 20, 3, p. 1876-1877 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 30 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Grain boundary excess volume and defect annealing of copper after high-pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E. M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 15 Apr 2014, In: Acta materialia. 68, p. 189-195 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Fatigue crack growth investigations on ultrafine-grained metals produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 5 Mar 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Deformation behavior of Cu-composites processed by HPT

    Krämer, L., Wurster, S. & Pippan, R., 1 Jan 2014, In: IOP Conference Series: Materials Science and Engineering. 63, 1, 012026.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration

    Riesch, J., Höschen, T., Linsmeier, C., Wurster, S. & You, J. H., 1 Jan 2014, In: Physica scripta. T159, 014031.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Statistical quantification of the impact of surface preparation on yield point phenomena in nickel

    Lawrence, S. K., Zbib, H. M., Cordill, M. J., Wurster, S. & Bahr, D. F., 1 Jan 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 10, p. 4307-4315 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    3D morphology of fracture surfaces created by mixed-mode II+III fatigue loading in metallic materials

    Vojtek, T., Pokluda, J., Hohenwarter, A., Slamecka, K. & Pippan, R., 2014, In: Procedia Engineering. p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Adhesion of metal-polymer interfaces

    Cordill, M., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  58. Published

    Advanced Diffraction Techniques for Microstructure and Stress Characterisation at Multiple Scales

    Stefenelli, M., 2014

    Research output: Thesis › Doctoral Thesis

  59. Published

    A fracture resistant high-entropy alloy for cryogenic applications

    Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P. & Ritchie, R. O., 2014, In: Science. 345, p. 1153-1158

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device

    Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    A New View on J-Integrals in Elastic-Plastic Materials

    Kolednik, O., Schöngrundner, R. & Fischer, F. D., 2014, In: International Journal of Fracture. 187, p. 77-107

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear - first experimental results

    Kammerhofer, C., Hohenwarter, A. & Pippan, R., 2014, In: Wear. 316, p. 101-108

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Auf Biegen und Brechen – Mikromechanik an miniaturisierten Materialien

    Kirchlechner, C. & Dehm, G., 2014, Max-Planck-Jahrbuch 2014. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  64. Published

    Controlled functionality of thin films through advanced microstructural design

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  65. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    Damage tolerance and strength increase of drivetrain components

    Maierhofer, J., 2014

    Research output: Thesis › Doctoral Thesis

  68. Published

    Deformation mechanisms in single crystalline Mg studied by in-situ microcompression testing

    Alfreider, M., Treml, R., Jeong, J., Oh, S. H. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Deformation mechanisms in single crystalline Mg studied by in-situ microcompression testing

    Alfreider, M., Treml, R., Jeong, J., Oh, S. H. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Development of micrometer-sized specimen production processes for nonconductive materials

    Milassin, G., 2014, 59 p.

    Research output: Thesis › Diploma Thesis

  71. Published

    Die Versagensmechanismen pressgehärteter Stähle im Dreipunkt-Biegeversuch

    Benedyk, K. B., 2014, 147 p.

    Research output: Thesis › Doctoral Thesis

  72. Published

    Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

    Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In: Acta materialia. 73, p. 240-250

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Ductile film delamination from compliant substrates using hard overlayers

    Cordill, M. J., Marx, V. M. & Kirchlechner, C., 2014, In: Thin solid films. 571, p. 302-307

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Eine Legierung aus fünf Metallen

    Hohenwarter, A., 2014, In: Die Presse. p. x-x

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers Inc., 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 2014, In: Procedia Materials Science. 3, p. 1044-1049

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Final report PN 6019

    Maier, V. & Kiener, D., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Fracture toughness enhancement of thin films by advanced microstructural design and architecture - Examples of bio-inspired model soft-hard crystalline-amorphous coating systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  81. Published

    Grain boundary excess volume and defect annelaing of copper after high pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E.-M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 2014, In: Acta materialia. 68, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al-3wt.%Cu alloy

    Rashkova, B., Faller, M., Pippan, R. & Dehm, G., 2014, In: Journal of alloys and compounds. 600, p. 43-50

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    High strength pearlitic nanocomposites

    Kapp, M., Hohenwarter, A., Wurster, S., Kammerhofer, C., Yang, B. & Pippan, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Humidity-driven deformation of ordered mesoporous silica films

    Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Improvements of Strength and Fracture Restistance by Spatial Material Property Variations

    Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P., 2014, In: Acta materialia. 68, p. 279-294

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys

    Li, J., Oberdorfer, B., Wurster, S. & Schumacher, P., 2014, In: Journal of materials science. 49, p. 5961-5977

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of heat treatment on the microstructural evolution of Al-3 wt.% Cu during high-pressure torsion

    Hohenwarter, A., Faller, M., Rashkova, B. & Pippan, R., 2014, In: Philosophical magazine : Letters. 94, p. 342-350

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influence of material properties on the in-service behavior of rails

    Kammerhofer, C. N., 2014, 162 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process

    Jirková, H., Masek, B., Wagner, M.F.-X., Langmajerová, D., Kucerová, L., Treml, R. & Kiener, D., 2014, In: Journal of alloys and compounds. 615, p. S163-S168

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Innovatives Legierungskonzept mit außergewöhnlichen Eigenschaften: APA Science

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  91. Published

    Investigation of interface properties of barrier metals on dielectric substrates

    Völker, B., 2014

    Research output: Thesis › Doctoral Thesis

  92. Published

    Investigation of the fatigue crack growth of ultrafine-grained and nanocrystalline Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  93. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Laue Microdiffraction at the ESRF

    Robach, O., Kirchlechner, C., Micha, J.-S. & Ulrich, O., 2014, Strain and Dislocation Gradients from Diffraction. p. 156-204

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    Legierung mit einem hohen Potenzial: Kleine Zeitung - online

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  96. Published

    Leobener Forscher finden neue Kältelegierung: ORF online

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  97. Published

    Leobener Materialphysiker in “Nature Communications”: BMH-online

    Kiener, D., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  98. Published

    Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions

    Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Microstructural and stress design of thin films - The journey from nitrides to oxides, from nanocrystalline to amorphous materials

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  100. Published

    Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation

    Jeong, J., Lee, S., Kim, Y., Han, S. M., Kiener, D., Youn-Bae, K. & Oh, S. H., 2014, In: Scripta materialia. 86, p. 44-47

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films

    Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  102. Published

    Mikrobiegeversuche am PicoIndenter 85

    Reisinger, M., 2014

    Research output: Thesis › Diploma Thesis

Previous 1...4 5 6 7 8 9 10 11 ...17 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112