Montanuniversität

Organisational unit: University

701 - 800 out of 30,152Page size: 100

10
20
50
100

Sort by: Publication date

Publications / Theses

2021
Published
Microstructural and Mechanical Properties of Si-alloyed AlCrN Hard Coatings: Grain Boundary Segregation Engineering by CrN Precipitation
Ziegelwanger, T., 2021
Research output: Thesis › Master's Thesis
Published
Microstructural effects on the interfacial adhesion of nanometer- thick Cu films on glass substrates: Implications for microelectronic devices
Lassnig, A., Terziyska, V., Zalesak, J., Jörg, T., Többens, D., Griesser, T., Mitterer, C., Pippan, R. & Cordill, M., 2021, In: ACS Applied Nano Materials. 2021, 4, p. 61-70
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and local mechanical properties of the heat-affected zone of a resistance spot welded medium-Mn steel
Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 2021, In: Materials. 2021, 14, p. 1-13
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings
Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 421, p. 1-8
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology
Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., 2021, In: Intermetallics. 2021, 138, p. 1-10
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of partially ferritic Q&P steels
Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 815, p. 1-11
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy
Klein, T., Graf, G., Staron, P., Stark, A., Clemens, H. & Spörk-Erdely, P., 2021, In: Materials letters. 2021, 303, p. 1305001-1305004
Research output: Contribution to journal › Article › Research › peer-review
Published
Mikrostruktureinfluss auf Schwellwertverhalten und Bruchzähigkeit von additiv gefertigten γ-Titanaluminiden
Zeiler, S., 2021
Research output: Thesis › Master's Thesis
Published
Mikrostrukturentwicklung der Nickel-Basis Superlegierung RENE65
Candic, K., 2021
Research output: Thesis › Master's Thesis
Published
Mineral phases in untreated and conditioned electric arc furnace slags and their solubility
Sammer, T., 2021
Research output: Thesis › Master's Thesis
Published
Modellierung des elektrischen Energiesystems eines Elektrostahlwerkes
Marschnig, A., 2021
Research output: Thesis › Master's Thesis
Published
Modellierung einer Festbettreaktorkaskade für die dynamische Methanisierung von Kuppelgasen mittels MATLAB® Simulink
Moser, P., 2021
Research output: Thesis › Master's Thesis
Published
Modellierung und Optimierung des österreichischen Energiesystems
Steinegger, J., 2021
Research output: Thesis › Master's Thesis
Published
MOF-Derived Metal-Carbon Composite Materials as Bifunctional Catalyst for Zn-Air Battery
Sanli, A., 2021
Research output: Thesis › Master's Thesis
Published
Möglichkeiten der Lagerautomatisierung am Beispiel der Knorr-Bremse Mödling GmbH
Hübl, F., 2021
Research output: Thesis › Master's Thesis
Published
Molecular dynamics study of the nanoindentation behavior of cu₆₄zr₃₆/cu amorphous/crystalline nanolaminate composites
Wu, W. P., Şopu, D. & Eckert, J., 2021, In: Materials. 14, 11, 2756.
Research output: Contribution to journal › Article › Research › peer-review
Published
Montanuniversität Leoben - Lehrstuhl für Gießereikunde
Schumacher, P., 2021, In: Jahresmagazin Ingenieurwissenschaften im Fokus: akaGuss – Gießereitechnik. p. 76-84
Research output: Contribution to journal › Article › Research
Published
Morphology of cracks and shear bands in polymer-supported thin film metallic glasses
Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., 2021, In: Materials Today Communications. 2021, 28, p. 1-11
Research output: Contribution to journal › Article › Research › peer-review
Published
Multi-class grain size model for forged alloy 718 aircraft parts
Gruber, C., Raninger, P., Stockinger, M. & Bucher, C., 2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). p. 499-508 10 p. (Materials Science Forum; vol. 1016 MSF).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multidimensional Trajectory Tracking for Numerically Stiff Independent Metering System
Stojanoski, G., Ninevski, D., Rath, G. & Harker, M., 2021.
Research output: Contribution to conference › Paper › peer-review
Published
Multiscale modeling of gas hydrate formation in oil reservoirs
Rathmaier, D., 2021
Research output: Thesis › Master's Thesis
Published
Nachhaltige recyclingbezogene Aluminium-Legierungen
Krall, P., 2021
Research output: Thesis › Master's Thesis
Published
Nanocluster evolution and mechanical properties of ion irradiated T91 ferritic-martensitic steel
Davis, T. P., Auger, M. A., Hofer, C., Bagot, P., Moody, M. P. & Armstrong, D. E. J., 2021, In: Journal of nuclear materials. 2021, 548, p. 1-10
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storage
Kostoglou, N., Koczwara, C., Stock, S., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Paris, O., Rebholz, C. & Mitterer, C., 2021, In: Chemical Engineering Journal. 2021, 427, p. 1-10
Research output: Contribution to journal › Article › Research › peer-review
Published
NEFI – New Energy for Industry
Kienberger, T. (Guest editor) & Kienberger, T., 2021, In: Elektrotechnik und Informationstechnik.
Research output: Contribution to journal › Article › Research
Published
NEFI – New Energy for Industry: Die Industrie als elementarer Baustein der Energiewende für Österreich und darüber hinaus.
Kienberger, T., Nagovnak, P., Geyer, R., Hainoun, A. & Binderbauer, P., 2021, In: WING-Business.
Research output: Contribution to journal › Article › Research
Published
New evidence for Late Cretaceous plume-related seamounts in the Middle East sector of the Neo-Tethys: Constraints from geochemistry, petrology, and mineral chemistry of the magmatic rocks from the western Durkan Complex (Makran Accretionary Prism, SE Iran)
Barbero, E., Zaccarini, F., Delavari, M., Dolati, A., Saccani, E., Marroni, M. & Pandolfi, L., 2021, In: Lithos. 396-397, 22 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
New mold slag compositions for the continuous casting of soft steels
Kölbl, N., 2021.
Research output: Contribution to conference › Abstract › peer-review
Published
New Mold Slag Compositions for the Continuous Casting of Soft Steels
Kölbl, N., 2021, In: Steel research international. p. 1-7 7 p.
Research output: Contribution to journal › Special issue › Research › peer-review
Published
New sediment provenance approach based on orthonormal log ratio transformation of geochemical and heavy mineral data: Sources of eolian sands from the southeastern Adriatic archipelago
Razum, I., Lužar-Oberiter, B., Zaccarini, F., Babić, L., Miko, S., Hasan, O., Ilijanić, N., Beqiraj, E. & Pawlowsky-Glahn, V., 2021, In: Chemical geology. 583, 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
NOx-Emissionen beim Recycling von Elektronikschrott
Schloffer, J., 2021
Research output: Thesis › Master's Thesis
Published
NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Numerical Simulation of Coal-Seam Gas Drainage Based on Solid-Gas Coupling Model
Wang, S., 2021
Research output: Thesis › Master's Thesis
Published
Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method
Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerische Analysen zur Schweißpfadplanung komplexer WAAM-Strukturen
Prüller, S., 2021
Research output: Thesis › Master's Thesis
Published
Nüwa, a self-sustainable city state on Mars – development concept, urban design and life support
Hartlieb, P., Detrell, G., Munoz, A., Banchs i Piqué, M., Anglada-Escude, G. & Sureda, M., 2021, 50th International Conference on Environmental Systems.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Observation of an electrical breakdown at ZnO Schottky contacts in varistors
Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974
Research output: Contribution to journal › Article › Research › peer-review
Published
Oil Production Prediction of Multi-fractured Horizontal Wells Using Data Science Techniques
Bejjar, W., 2021
Research output: Thesis › Master's Thesis
Published
Ökologische Bewertung des Recyclings von Mineralwolleabfällen als Ersatzrohstoffe und Zumahlstoffe in der Zementindustrie
Schenk, J., 2021
Research output: Thesis › Master's Thesis
Published
Online Anticipatory Algorithms for Scheduling Problems
Erler, S., 2021
Research output: Thesis › Master's Thesis
Published
On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold
Vakhrushev, A., Kharicha, A., Wu, M., Tang, Y., Ludwig, A., Nitzl, G., Watzinger, J., Bohacek, J. & Hackl, G., 2021, In: Metals. 2021, 11/9
Research output: Contribution to journal › Article › Research › peer-review
Published
On the second Lyapunov exponent of some multidimensional continued fraction algorithms
Berthé, V., Steiner, W. & Thuswaldner, J., 2021, In: Mathematics of computation. 90, p. 883 905 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Optimierung der Stabilisierung im System Al-Mg-Si nach dem Strangpressen
Ortner, P., 2021
Research output: Thesis › Master's Thesis
Published
Optimization of Bolt (cable) Supporting Technology in Soft Rock Roadway of Wangzhuang Mine in Shanxi Province
Zhang, Q., 2021
Research output: Thesis › Master's Thesis
Published
Origins, Distribution, and Fate of Contaminants and Ash Constituents in Waste for SRF Production and Co-Processing
Viczek, S. A., 2021
Research output: Thesis › Doctoral Thesis
Published
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise
Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., 2021, In: Composites Part A: Applied Science and Manufacturing.
Research output: Contribution to journal › Article › Research › peer-review
Published
Oxygen exchange kinetics and electrical conductivity of self-generated Ba(Ce,Fe,Y)O_3-δ − Ba(Fe,Ce,Y)O_3-δ nanocomposites
Nader, C., Berger, C., Bucher, E. & Sitte, W., 2021, 2021 Spring Meeting of the European Materials Research Society (E-MRS).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Packungsstrukturen für die Abgasentschwefelung auf Hochseeschiffen
Schlager, M., Wolf-Zoellner, V. & Lehner, M., 2021.
Research output: Contribution to conference › Presentation › Research
Published
Parameteroptimierung für das Elektropolieren von Molybdän in Schwefelsäure
Eichinger, M., 2021
Research output: Thesis › Master's Thesis
Published
Parameters substantiation of the water treatment plant selection based on the reverse osmosis technology considering conditions given on PrJSC "DTEK Pavlogradvugillya" enterprise.
Salli, V., 2021
Research output: Thesis › Master's Thesis
Published
Particle Size Estimation in Mixed Commercial Waste Images Using Deep Learning
Kittiworapanya, P., Pasupa, K. & Auer, P., 2021, IAIT2021: The 12th International Conference on Advances in Information Technology.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria
Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.
Research output: Contribution to conference › Poster › Research
Published
Pilot Scale Experiments for Ammonium Recovery from Sludge Liquor at a Municipal Waste Water Treatment Plant
Lubensky, J. & Ellersdorfer, M., 2021, In: Journal of sustainable development of energy, water and environment systems. 9.2020, 2, 11 p., 1080349.
Research output: Contribution to journal › Article › Research › peer-review
Published
Planning and implementation of a digital shadow for the friction factor quantification of the ECAP process using a grey box modeling approach and finite element analysis
Schwarz, A., Ralph, B. J. & Stockinger, M., 2021, In: Procedia CIRP. 99, p. 237-241 5 p.
Research output: Contribution to journal › Conference article › peer-review
Published
Ply-by-ply inline thermography inspection for thermoplastic automated tape layup
Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 2021, In: Advanced Manufacturing: Polymer and Composites Science. 7, 3-4, p. 49-59 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Prediction of Complications and Accidents during Drilling with Application of Machine Learning Model
Seynaroev, M., 2021
Research output: Thesis › Master's Thesis
Published
Preparation and characterisation of self-generated composites for protonic ceramic fuel cells
Nader, C., 2021
Research output: Thesis › Master's Thesis
Published
Preparation and characterization of (La,Ca,Sr)(Fe,Co)O3-δ cathodes for solid oxide fuel cells
Micu-Budisteanu, M., 2021
Research output: Thesis › Master's Thesis
Published
Preparation and characterization of La_0.8Ca_0.2Fe_0.8Co_0.2O_3-δ as a new air electrode material for solid oxide cells
Micu-Budisteanu, M., Berger, C., Bucher, E., Lenser, C., Menzler, N. H. & Sitte, W., 2021, KERAMIK 2021- 96. Jahrestagung der Deutschen Keramischen Gesellschaft.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Pressure- and temperature-dependent diffusion from first-principles: A case study of V and Ti in a TiN matrix
Nayak, G. K., Popov, M. & Holec, D., 2021, In: Surface & coatings technology. p. 127491 1-10
Research output: Contribution to journal › Article › Research › peer-review
Published
Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models
Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Quantification of Particle Size Distribution with Different Analytical and Statistical Techniques
Sam, H., 2021
Research output: Thesis › Master's Thesis
Published
Radiometrische Datierung des Molybdänvorkommens Reichenspitze, Tirol/Salzburg
Doppelmayer, D., 2021
Research output: Thesis › Master's Thesis
Published
Reconstruction of Hydrothermal Processes in the Cyprus Type Fe-Cu-Zn Deposits of the Italian Northern Apennines: Results of Combined Fluid Inclusion Microthermometry, SEM-CL Imaging and Trace Element Analyses by LA-ICP-MS
Kiss, G., Bendo, Z., Garuti, G., Zaccarini, F., Király, E. & Molnar, F., 2021, In: Minerals. 11, 165, 21 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Researching of modern technologies of the mechanical properties determination by simulation procedures for the purposes of controlling of the slightly metamorphosed massif stability
Neshchadymenko, A., 2021
Research output: Thesis › Master's Thesis
Published
Research on 3-digital Core Refactoring Techniques and Numerical Simulation of its Electrical Conductivity
Chen, H., 2021
Research output: Thesis › Master's Thesis
Published
Risk Assessment of Metal Open-pit Mine Based on Cloud Model and Bayesian Network: A Case study in China
Li, R., 2021
Research output: Thesis › Master's Thesis
Published
Sand Casting of Metallic Parts and Structures
LI, J., 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Schäden, Einflüsse und weitere Effekte in Abfallbehandlungsanlagen durch Störstoffe
Löffler, L., 2021
Research output: Thesis › Master's Thesis
Published
Selektive Laugung von Dicalciumsilikat in LD-Schlacke mit Zitronensäure
Hartig, G., 2021
Research output: Thesis › Master's Thesis
Published
Simulation der thermischen Belastung blockgebremster Eisenbahnräder
Scheinast, D., 2021
Research output: Thesis › Master's Thesis
Published
Smart Logistics: Digitale Zwillinge
Reifbäck, C., 2021
Research output: Thesis › Master's Thesis
Published
Sputter deposited TiAlN/AlTiN and CrAlN/TiAlN: multilayer coatings
Blumauer, S., 2021
Research output: Thesis › Master's Thesis
Published
Stable and metastable phases in Cu20Sn investigated via high resolution methods
Lumper, L., Kappacher, J., Clemens, H. & Maier-Kiener, V., 2021.
Research output: Contribution to conference › Poster › Research
Published
Stahlseilfördergurte mit Verbindungsstellen ohne Festigkeitsverluste
Mühlbacher, M., 2021
Research output: Thesis › Master's Thesis
Published
Stand der Technik von Kunststoffsortieranlagen und Potentiale durch sensorische Stoffstromüberwachung
Schlögl, S., 2021
Research output: Thesis › Master's Thesis
Published
Stand des Wissens und Orientierungsversuche zur Methanpyrolyse
Weiss, H., 2021
Research output: Thesis › Master's Thesis
Published
Static Calibration and Dynamic Verifiation of a 3-Axis Accelerometer using the Method of Variable Projection
Lang, E., Rollett, M., Theußl, E. & O'Leary, P., 2021.
Research output: Contribution to conference › Paper › peer-review
Published
Steuerung von Innovationsprozessen am Beispiel eines österreichischen Dienstleistungsunternehmens
Gruber, L., 2021
Research output: Thesis › Master's Thesis
Published
Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing
Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 2021, In: Materials and Design. 2021, 204, p. 1-11 109690.
Research output: Contribution to journal › Article › Research › peer-review
Published
Strömungstechnische Grundlagen für die Bewetterung verzweigter untertägiger Hohlraumbauwerke
Wallner, F., 2021
Research output: Thesis › Master's Thesis
Published
Strong solution to stochastic penalised nematic liquid crystals model driven by multiplicative Gaussian noise
Hausenblas, E., 2021, In: Indiana Univ. Math. J..
Research output: Contribution to journal › Article › Research › peer-review
Published
Structural Characterization of Carbons Derived from Methane Pyrolysis
Knabl, F., 2021
Research output: Thesis › Master's Thesis
Published
Structural, electrical and mechanical properties of AgAuSi thin film metallic glasses on polymer substrates
Weniger, L.-M., 2021
Research output: Thesis › Master's Thesis
Published
Structure-property relations in the La_0.8-xNd_xCa_0.2FeO_3-δ series with respect to application in solid oxide cell air electrodes
Bucher, E., Berger, C., Lammer, J., Nader, C. & Sitte, W., 2021, 2021 Spring Meeting of the European Materials Research Society (E-MRS).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study of the geothermal potential in the area surrounding Ebensee for salt production
Riegler, L., 2021
Research output: Thesis › Master's Thesis
Published
Study on Gas Explosion Law Induced by High Temperature Source in Coal and Rock Media
Gao, X., 2021
Research output: Thesis › Master's Thesis
Published
Study on Key Factors of Roadway Roof Stability Control
Wei, P., 2021
Research output: Thesis › Master's Thesis
Published
Study on Microbial Desulfurization of High Sulfur Coal in Shanxi Province
Gou, M., 2021
Research output: Thesis › Master's Thesis
Published
Study on Stabilization of α-case in Ti-6Al-4V
Lukas, T., 2021
Research output: Thesis › Master's Thesis
Published
Study on Ventilation Method of A Plateau Metal Mine in Yunnan Province
Hao, Y., 2021
Research output: Thesis › Master's Thesis
Published
Subcritical Crack Growth: Modeling of the v–K Curve in Different Environments
Bermejo, R., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 811-817
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Surge in global metal mining threatens vulnerable ecosystems
Luckeneder, S., Giljum, S., Schaffartzik, A., Maus, V. & Tost, M., 2021, In: Global environmental change : human and policy dimensions. 2021, 69
Research output: Contribution to journal › Article › Research › peer-review
Published
Synthesis and fundamental characterization of the first order Ruddlesden-Popper nickelate La₂Ni_0.9Co_0.1O_4+δ
Eisbacher-Lubensky, S. L., Egger, A., Bucher, E. & Sitte, W., 2021, 2021 Spring Meeting of the European Materials Research Society (E-MRS).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Synthesis of bulk reactive Ni-Al composites using high pressure torsion
Renk, O., Tkadletz, M., Kostoglou, N., Gunduz, I. E., Fezzaa, K., Sun, T., Stark, A., Doumanidis, C. C., Eckert, J., Pippan, R., Mitterer, C. & Rebholz, C., 2021, In: Journal of alloys and compounds. 2021, 857, p. 1-11 157503.
Research output: Contribution to journal › Article › Research › peer-review
Published
Synthesis, Properties and Performance of selected hard and wear resistant Coatings for Metal Cutting Applications
Friedrich, B. E., 2021
Research output: Thesis › Master's Thesis
Published
Technology Innovation in Direct Fastening on Concrete and Steel
Tropper, F., 2021
Research output: Thesis › Master's Thesis
Published
Textural and geochemical window into the IDDP-1 rhyolitic melt, Krafla, Iceland, and its reaction to drilling
Saubin, E., Kennedy, B. M., Tuffen, H., Nichols, A. R. L., Villeneuve, M., Bindeman, I., Mortensen, A., Schipper, I., Wadsworth, F., Watson, T. & Zierenberg, R., 2021, In: Geological Society of America bulletin. 2021, 16 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
The environmental performance of mining operations: Comparison of alternative mining solutions in a life cycle perspective
Lai, F., Beylot, A., Navarro, R., Schimek, P., Hartlieb, P., Johansson, D., Segarra, P., Villeneuve, J., Amor, C. & Villeneuve, J., 2021, In: Journal of Cleaner Production. 315.2021, 15 September, 15 p., 128030.
Research output: Contribution to journal › Article › Research › peer-review
Published
The Exergy Analysis in Production Engineering
Smaoui, I., 2021
Research output: Thesis › Master's Thesis

Previous 1...4 5 6 7 8 9 10 11 ...302 Next

Research Portal

Montanuniversität

Publications / Theses

Contact information