Chair of Simulation and Modelling of Metallurgical Processes (310)

Organisational unit: Chair

1 - 500 out of 515Page size: 500

Publications / Theses

  1. 2023
  2. Published

    Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

    Xing, Y., Li, C. J., Mu, Y. K., Jia, Y. D., Song, K. K., Tan, J., Wang, G., Zhang, Z. Q., Yi, J. H. & Eckert, J., 1 Jan 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 132, p. 119-131

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2022
  4. Published

    Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

    Lu, S. L., Zhang, Z. J., Liu, R., Zhou, X. H., Wang, X. G., Zhang, B. N., Zhao, X. M., Eckert, J. & Zhang, Z. J., Nov 2022, In: Additive Manufacturing. 59, 103092.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment

    Lu, S. L., Zhang, Z. F., Liu, R., Qu, Z., Wang, B., Zhou, X. H., Eckert, J. & Zhang, Z. F., 5 Sept 2022, In: Journal of alloys and compounds. 914, 165235.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

    Zhang, Z. Q., Ketov, S. V., Fellner, S., Sheng, H. P., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., Apr 2022, In: Materials and Design. 216, 110530.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2021
  8. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    "Generation of Reverse Meniscus Flow by ApplyingAn Electromagnetic Brake"

    Vakhrushev, A., Kharicha, A., Ludwig, A., Hackl, G., Eckert, S., Watzinger, J., Wu, M., Karimi Sibaki, E., Nitzl, G. & Tang, Y., Jul 2021, In: Journal of Mining and Metallurgy, Section B: Metallurgy.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Ludwig, A., Kharicha, A., Gomes Rodrigues, C. & Schumacher, P., May 2021, In: Applied Mathematical Modelling. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 2021, 4, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Inductive Thermography as Non-Destructive Testing for Railway Rails

    Tuschl, C., Oswald-Tranta, B. & Eck, S., Feb 2021, In: Applied Sciences. 11, 3

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Adsorption of Cholesterol by Carbon Nanotubes

    Vakhrushev, A. (Illustrator), 2021

    Research output: Book/Report › Book › Research

  14. Accepted/In press

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A. & Kharicha, A., 2021, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Tang, Y., Ludwig, A., Nitzl, G., Watzinger, J., Bohacek, J. & Hackl, G., 2021, In: Metals. 2021, 11/9

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2020
  19. Published

    Two-phase viscoplastic model for the simulation of twin roll casting

    Rodrigues, C. M. G., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., Dec 2020, In: Journal of materials processing technology. 286, 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Numerical Simulation of Heat Treatment of Ti-6AI-4V by using a Phase-Field Method Based Software.

    Mogeritsch, J., Panzl, G., Watzl, A. & Ludwig, A., 2 Oct 2020. 11 p.

    Research output: Contribution to conference › Paper

  22. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Cooperative Shear in Bulk Metallic Glass Composites Containing Metastable β-Ti Dendrites

    Zhang, L., Narayan, R. L., Sun, B. A., Yan, T. Y., Ramamurty, U., Eckert, J. & Zhang, H. F., 31 Jul 2020, In: Physical review letters. 125, 5, 055501.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541, July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  28. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  29. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  30. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  31. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  32. Published

    Numerical investigation of an in-situ observed flow regimes during solidification of an NH 4Cl - 70wt%H 2O solution

    Wu, M. & Stefan-Kharicha, M. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  33. Published

    A 2D Multiphase Model of Drop Behavior during Electroslag Remelting

    Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG

    Mogeritsch, J., Abdi, M. & Ludwig, A., 21 Feb 2020, In: Materials. 13.2020, 4, 16 p., 966.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Wu, M., Ludwig, A., Kharicha, A. & Vakhrushev, A., 2020, In: Journal of materials processing technology.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2019
  40. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG

    Mogeritsch, J., Böttger, B. & Ludwig, A., 23 Jul 2019, p. 2-7.

    Research output: Contribution to conference › Paper

  42. Published

    Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet

    Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.

    Research output: Contribution to conference › Paper

  43. Published

    Formation of micro-plumes at a planar solid/liquid interface in a temperature gradient

    Mogeritsch, J., Pfeifer, T. & Ludwig, A., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Interaction between flow and faceted crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm

    Jäger, S. & Ludwig, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  46. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  47. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  48. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    A GPU solver for symmetric positive-definite matrices vs. traditional codes

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Holzmann, T. & Karimi-Sibaki, E., 7 Mar 2019, (E-pub ahead of print) In: Computers and mathematics with applications. 79.2019, 9, p. 2933-2943 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification

    Wu, M., Ludwig, A. & Kharicha, A., Feb 2019, In: Metals : open access journal . 9.2019, 2, 229.

    Research output: Contribution to journal › Review article › peer-review

  51. Published

    An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Heavy Continuous-Casting Slab

    Liu, Z., Li, B., Wu, M., Xu, G., Ruan, X. & Ludwig, A., 2 Jan 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 3, p. 1370-1379 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A dynamic mesh method to model shape change during electrodeposition

    Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2019, In: Journal of the Electrochemical Society. 166, 12, p. D521-D529

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1429-1443 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    DNS and Engineering Modeling of the Electroslag Remelting Process

    Chaulet, J., Kharicha, A., Dussoubs, B., Charmond, A., Jardy, A. & Hans, S., 2019, p. 107-116.

    Research output: Contribution to conference › Paper › peer-review

  55. Published

    Formation of micro-plumes at a planar solid liquid interface in a temperature gradient

    Mogeritsch, J., Pfeifer, T. & Ludwig, A., 2019.

    Research output: Contribution to conference › Paper

  56. Published

    Investigations on Collective Motion of Cathode Spots in the VAR Process

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Modeling Electrochemical Transport of Ions in the ESR Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.

    Research output: Contribution to conference › Paper › peer-review

  58. Published

    Numerical Investigation of the Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Numerical modeling of clogging in submerged entry nozzle during steel continuous casting

    Barati, H., 2019

    Research output: Thesis › Doctoral Thesis

  60. Published

    On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold

    Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.

    Research output: Contribution to conference › Paper › peer-review

  61. Published

    On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.

    Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.

    Research output: Contribution to conference › Paper › peer-review

  62. Published

    Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel

    Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, p. 664-667.

    Research output: Contribution to conference › Paper › peer-review

  64. 2018
  65. Published

    Numerical Investigation of Collective Motion of Cathode Spots

    Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Electro-vortical MHD Interface Instabilities

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.

    Research output: Contribution to conference › Paper › peer-review

  68. Published

    Modeling of the Twin-Roll Casting Process: Transition from Casting to Rolling

    Rodrigues, C., Ludwig, A., Kharicha, A. & Wu, M., 29 Sept 2018, In: Transactions of the Indian Institute of Metals. 71.2018, November, p. 2645-2649 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification

    Mogeritsch, J. & Ludwig, A., 2 Sept 2018, p. 330-335. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structure

    Mogeritsch, J., Pfeifer, T., Stefan-Kharicha, M. & Ludwig, A., 2 Sept 2018, p. 319-324. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  72. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment

    Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122, p. 939-953 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Review of Ammonium Chloride–Water Solution Properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 2018, 9

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Feuerverzinkung: Simulation des Erstarrungsvorganges beim Feuerverzinken unter Zuhilfenahme des auf der Phasenfeldmethode basierenden Simulationsprogrammes MICRESS.

    Mogeritsch, J., 7 May 2018, Leoben

    Research output: Other contribution › Research

  76. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification

    Mogeritsch, J. & Ludwig, A., 26 Feb 2018, In: Research & Development in Material Science. p. 1-3 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    A transient model for nozzle clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2 Feb 2018, In: Powder Technology. 329.2018, 15 April, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    A transient model for nozzle clogging - Part II: Validation and verification

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 1 Jan 2018, In: Powder Technology.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Numerical modeling of bubbly flow in continuous casting mold using two population balance approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, A., Li, B. & Xu, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89, 1, 1700100.

    Research output: Contribution to journal › Review article › peer-review

  83. Published

    Simulation in metallurgy: Past achievements and future challenges

    Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, In: IOP Conference Series: Materials Science and Engineering. p. 28-33 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Simulation of non-metallic inclusion deposition and clogging of nozzle

    Barati, H., Wu, M., Holzmann, T., Kharicha, A. & Ludwig, A., 1 Jan 2018, In: Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing. p. 149-158 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.

    Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  86. Published

    Discussion on possible solidification during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  87. Published

    Estimation of convection ahead of a solid/liquid interface during solidification of layered peritectic solidification morphologies

    Pfeifer, T., 2018

    Research output: Thesis › Master's Thesis

  88. Published

    "Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.

    Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.

    Research output: Contribution to conference › Paper › peer-review

  89. Published

    Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, p. 62. 66 p.

    Research output: Contribution to conference › Paper › peer-review

  90. Published

    Methodenentwicklung zur Berechnung der Materialeigenschaften von Aluminium Gusslegierungen in 3D für lokale Wärmebehandlungen mit optionaler Optimierung

    Holzmann, T., 2018

    Research output: Thesis › Doctoral Thesis

  91. Published

    Multiphase modeling of as-solidified structure and macrosegregation in continuously cast round billet of large format

    Zheng, Y., 2018

    Research output: Thesis › Doctoral Thesis

  92. Published

    Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  93. Published

    Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, J., Li, B., Xu, G. & Ludwig, A., 2018, p. 1. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  94. Published

    Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  95. Published

    Observation of Flow Phenomena during Dendritic Solidification

    Stefan-Kharicha, M., 2018

    Research output: Thesis › Doctoral Thesis

  96. Published

    “Premature melt solidification during mold filling and its influence on the as-cast structure”

    Wu, M., Ahmadein, M. & Ludwig, A., 2018, In: Frontiers of Mechanical Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Simulation von Eigenspannungen während der Wärmebehandlung einer aushärtbaren Aluminium-Gusslegierung

    Mayr, P. M., 2018

    Research output: Thesis › Master's Thesis

  98. Published

    The efect of magnetically controlled fluid flow on microstructure evolution in cast technical Al-alloys: The MICAST project.

    Wu, M., 2018.

    Research output: Contribution to conference › Paper › peer-review

  99. 2017
  100. E-pub ahead of print

    Incorporation of fragmentation into a volume average solidification model

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 5 Dec 2017, (E-pub ahead of print) In: Modelling and simulation in materials science and engineering. 26.2018, 1, 18 p., 015004.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Feuerverzinkung

    Mogeritsch, J., 13 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  102. Published

    A (non-)hydrostatic free-surface numerical model for two-layer flows

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr 2017, In: Applied Mathematics and Computation. 319.2018, 15 February, p. 301-317 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Phase-field modelling of ternary eutetic solidification in hot dip galvanization

    Mogeritsch, J. P., Ludwig, A., Böttger, B., Angeli, G., Riener, C. K. & Ebner, R., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. Vol. 2017-January. p. 1171-1182 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  105. Published

    “A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot”

    Wu, M., Kharicha, A. & Ludwig, A., 2017, In: Applied Mathematical Modelling. 41, p. 102-120

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    “A water experiment benchmark to evaluate numerical models for the motion of particles in continuous casting tundish”

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2017, In: Steel research international. 88, p. 1600276 (1-13)

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Discussion on Modeling Capability for Macrosegregation

    Wu, M., Kharicha, A. & Ludwig, A., 2017, In: High temperature material processes. 36, p. 531-539

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Engineering applications of magnetohydrodynamics

    Kharicha, A., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  109. Published

    Establishing a numerical criterion to verify the RANS-type flow simulation in application to the continuous casting process

    Vakhrushev, A., Ludwig, A., Wu, M., Nitzl, G., Tang, Y. & Hackl, G., 2017, In: Applied Mathematical Modelling.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Massive formation of equiaxed crystals by avalanches of mushy zone segments

    Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 6, p. 2927-2931 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 503-507. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  112. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Numerical Study of the Buoyancy Effect on Magnetohydrodynamic Three-Dimensional LiPb Flow in a Rectangular Duct

    Kharicha, A., Bouabdallah, A., Merah, A., Tigrine, Z. & Mokhtari, F., 2017, In: Journal of Fluids Engineering. 139, p. 061201(1-9)

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  115. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017, International Center for Numerical Methods in Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    “Role of fragmentation in as-cast structure: numerical study and experimental validation”

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, In: China Foundry. 14, p. 321-326

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    “Simulation of as-cast steel ingot”

    Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, p. Cover 8 p., 1700011.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    “Towards modeling of electrochemical reactions during electroslag remelting (ESR) process”

    Karimi Sibaki, E., Kharicha, A., Wu, M., Bohacek, J. & Ludwig, A., 2017, In: Steel research international. 88, 5, p. 1700011 (1-8)

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  121. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. 2016
  123. Published

    quartal year report Q1-Q2/2016 on project "Automatisierte Prozesskettensimulation (MCL: A1.17)"

    Holzmann, T. (Editor), 10 Oct 2016

    Research output: Book/Report › Commissioned report › Research

  124. Published

    A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement

    Li, J., Ge, H., Wu, M., Ludwig, A. & Li, J., 11 Sept 2016, In: Jinshu-xuebao : Acta metallurgica Sinica. 52, 9, p. 1096-1104 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  126. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  127. Published

    Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

    Research output: Contribution to journal › Conference article › peer-review

  128. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

    Research output: Contribution to journal › Conference article › peer-review

  129. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  130. Published

    International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

    Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 011001.

    Research output: Contribution to journal › Editorial › peer-review

  131. Published

    On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced Engineering Materials. 18, 2, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots

    Ludwig, A., Wu, M. & Kharicha, A., 1 Jan 2016, p. 3-10. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  133. Published

    Automatic optimization of localized heat treatment for Al-Si-Mg alloys

    Ludwig, A. & Holzmann, T., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Compact seaweed growth of peritectic phase on confined, flat properitectic dendrites

    Mogeritsch, J. & Ludwig, A., 2016, In: Journal of crystal growth.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Free-surface flow in horizontally rotating cylinder: experiment and simulation

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Localized strengthening of al-based casting alloys by automatized optimization of laser heat treatment

    Ludwig, A. & Holzmann, T., 2016, In: Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing. 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography

    Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Multiphysics simulation of electroslag remelting process

    Karimi Sibaki, E., 2016

    Research output: Thesis › Doctoral Thesis

  140. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification

    Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand

    Zheng, Y. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  143. Published

    Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment

    Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator

    Barati, H. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Paper › peer-review

  147. Published

    Water model investigation of the influence of submerged entry nozzle on the turbulent flow in thin slab casting

    Nunner, G., 2016

    Research output: Thesis › Master's Thesis

  148. 2015
  149. Published

    In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 10 Nov 2015, p. 012055. 12055 p.

    Research output: Contribution to conference › Paper › peer-review

  150. Published

    On Macrosegregation

    Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 11, p. 4854-4867 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones

    Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  152. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4 wt.%Cu ingot using a 5-phase model

    Ahmadein, M., Wu, M. & Ludwig, A., 1 May 2015, In: Journal of crystal growth. 417, p. 65-74 10 p., 22363.

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Experimental investigations on energy absorption capacity of selected AlSiMg casting alloys

    Domitner, J., Bozorgi, S., Anders, K., Angermeier, C. & Schumacher, P., 1 Jan 2015, In: Materials Science and Technology (United Kingdom). 31, 1, p. 85-93 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2015, In: Journal of computational and applied mathematics. 267, p. 179-194

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    An attempt to model electrode change during the ESR process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots

    Wu, M., Ludwig, A. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    A scale adaptive dendritic envelope model of solidification at mesoscopic scales

    Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process

    Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.

    Research output: Contribution to conference › Paper › peer-review

  162. Published

    Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor

    Sturz, L., Wu, M., Zimmermann, G., Ludwig, A. & Ahmadein, M., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Characterization and optimization of the electrolyte flow in a conventional tankhouse cell

    Kemminger, A., 2015

    Research output: Thesis › Doctoral Thesis

  165. Published

    Experimental and numerical analysis of free surface deformationin an electrically driven flow

    Kharicha, A., Teplyakov, I., Y., I., Wu, M., Ludwig, A. & Guseva, A., 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 2015, MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Modelling As-Cast Structure and Macrosegregation in Ingot Casting

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: Materials China. 34, p. 640-651

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach

    Hao, J., Lin, Y. J., Nie, Y., Wu, M. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Modified shallow water equations with application for horizontal centrifugal casting of rolls

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2015, In: Journal of Fluids Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Programm- und Modellentwicklung zur Simulation von Makroseigerungsentstehungsphänomenen beim Brammenstranggießen von Stahl mit besonderem Augenmerk auf die Phänomene ″Feeding″ und ″Bulging″.

    Mayer, F., 2015

    Research output: Thesis › Doctoral Thesis

  171. Published

    Recent Developments and Future Perspectives in Simulation of Metallurgical Processes

    Ludwig, A., Wu, M. & Kharicha, A., 2015, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  172. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Transport phenomena during solidification of a vertical casting of steel: a multiphase numerical study

    Zheng, Y., Wu, M. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  177. 2014
  178. Published

    Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs

    Domitner, J., Wu, M. & Ludwig, A., 3 Jul 2014, In: Steel research international. 86, p. 184-188

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  180. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    3D Lattice Boltzmann flow simulations through dendritic mushy zones

    Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  184. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    "Automatisierte Prozesskettensimulation (MCL: A1.17)",

    Holzmann, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  186. Published

    "Entwicklung eines Gießsystems für ein Sandgußdemonstratorbauteil mit Hilfe numerischer Simulation (MCL: A1.17)"

    Holzmann, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  187. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution"

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, In: Materials Science Forum. p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Experimental and Numerical Investigations on Micro- and Macrosegregations in Continuously Cast Steel Slabs

    Domitner, J., 2014

    Research output: Thesis › Doctoral Thesis

  189. Published

    "Experimental verification of the 3-phase continuous casting simulation using a water model"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2014, 8th European Continuous Casting Conf. on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    "Influence of crystal morphological parameters on the solidification of ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Korp, J., 2014, In: Materials Science Forum. p. 396-401

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    "Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  195. Published

    "Numerical Study of the Influence of Diffusion-Governed Growth Kinetics on Macrosegregation"

    Wu, M., Kharicha, A. & Ludwig, A., 2014, In: Materials Science Forum. p. 85-90

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Observation of flow regimes and transitions during a columnar solidification experiment

    Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    On Melting of Electrodes during Electro-Slag Remelting

    Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Prediction of macrosegregation in steel ingot using a simplified denderitic model

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Karimi Sibaki, E., 2014, In: Materials Science Forum. 790-791, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    Progress report and ashievements, Sponsorgroup project, 27.05.2014

    Kemminger, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  200. Published

    Progress report and ashievements, Sponsorgroup project, 30.10.2014

    Kemminger, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  201. Published

    Recurring instability of cellular growth in a near peritectic transparent NPG-TRIS alloy system

    Ludwig, A. & Mogeritsch, J., 2014, In: Materials Science Forum.

    Research output: Contribution to journal › Article › Research › peer-review

  202. 2013
  203. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Variation of the resistance during the electrode movement in the electroslag remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  208. Published

    2nd annual Report "A volume-Averaging Solidification Model Incorporating Dendritic Crystal Morphology: Model Description, Improvement, and Verification"

    Ahmadein, M., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  209. Published

    3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Annual report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  212. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    "Discrete Phase Modelling for Continuous Casting: Model Verification and Application"

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2013, "Discrete Phase Modelling for Continuous Casting: Model Verification and Application".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  217. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Final Report on project "Metastable Solidification of Novel Peritectic Structures-Studies with Transparent Model Alloys: ISS Flieght Preparation

    Mogeritsch, J. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  219. Published

    Final Report on the short-term project "Simulation of solidification and macrosegregation in large round ingots produced by vertical continuous casting

    Li, J., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  220. Published

    Half year report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  221. Published

    Half Year Report Q1-2/2013 "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  222. Published

    half years report Q3-4/2013 on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., 2013

    Research output: Book/Report › Commissioned report › Transfer

  223. Published

    Metastable Solidification of Novel Peritectic Structures – Studies With Transparent Model Alloys: ISS Flight Preparation

    Mogeritsch, J. & Ludwig, A., 2013, ASAP Success Stories der 7. und 8. Ausschreibung. p. 37-37

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  224. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  226. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  227. Published

    "Minutes of the autumn meeting on project "Importance of Hydrodynamics In Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  228. Published

    "Minutes of the fall meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  229. Published

    Minutes of the Sponsor group meeting of the research project: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  230. Published

    Minutes of the spring meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  231. Published

    Minutes of the spring meeting on project "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  232. Published

    Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  233. Published

    Minutes of the summer meeting on project "Electromagnetic processing of dual-phase fluids"

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  234. Published

    Minutes of the winter meeting on project "Importance of Hydrodynamics in PEritectic Steek Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  235. Published

    Modeling of the flow-solidification interaction in thin slab casting

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    "Modelling and Simulation of Thin-Slap Casting"

    Vakhrushev, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  238. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  239. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    Modelling the Electrolyte Flow in a Full-Scale Copper Electrorefining Tankhouse Cell

    Kemminger, A., 2013, Proceedings of European Metallurgical Conference EMC 2013 Volume 2. p. 795-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Numerical investigation of shell formation in thin slab casting of funnel-type mould

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  243. Published

    "Numerical study of horizontal centrifugal casting of HSS work roll"

    Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    "Numerical study of macrosegregation in steel ingot"

    Li, J. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  245. Published

    "Optimization and Modelling of the Electrolyte Flow in a Conventional Copper Electrorefining Cell"

    Kemminger, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  246. Published

    Optische Beobachtung von peritektischen Erstarrungsmorphologien am Limit der konstitutionellen Unterkühlung durch den Einsatz von organischen Modellsubstanzen

    Mogeritsch, J., 2013, Optische Beobachtung von peritektischen Erstarrungsmorphologien am Limit der konstitutionellen Unterkühlung durch den Einsatz von organischen Modellsubstanzen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  248. Published

    Prediction of macrosegregation in steel ingot

    Li, J., 2013, 235 p.

    Research output: Thesis › Doctoral Thesis

  249. Published

    Preparation of Insitu-Observations of Isothermal Coupled Peritectic Growth on Board of the ISS

    Ludwig, A. & Mogeritsch, J., 2013, Symposium on "Materials Research in Microgravity. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  251. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  252. Published

    "Simulation of the beam blank casting. A new SEN type for the thin slab casting"

    Vakhrushev, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  253. Published

    Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Simulation results report "Simulation of the beam blank casting" for RHI "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  255. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  256. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  257. Published

    Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  258. Published

    Two-year-term report for the scientific evaluation of the Christian-Doppler laboratory for " Advanced Process Simulation of Solidification and Melting"

    Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  259. Published

    "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

    Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"

    Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. 2012
  262. Published

    Modeling of Multiscale and Multiphase Phenomena in Material Processing

    Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Advanced Multiphase Modeling of Solidification with OpenFOAM®

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Hackl, G. & Nitzl, G., 2012, Open Source CFD International Conference 2012. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  264. Published

    Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station

    Ludwig, A. & Mogeritsch, J., 2012, In: JOM. p. 1097-1101

    Research output: Contribution to journal › Article › Research › peer-review

  265. Published

    Annual report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  266. Published

    Charakterisierung der Kühlleistung unterschiedlicher Düsen beim Stranggießen von Stahl

    Kemminger, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  267. Published

    Experimental investigation on the ternary phase diagram Cu-Sn-P

    Ludwig, A., Grasser, M. & Schillinger, W., 2012, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 65, p. 117-125

    Research output: Contribution to journal › Article › Research › peer-review

  268. Published

    Half year report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells

    Kemminger, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  269. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  270. Published

    Influence of the frequency of the applied AC current on the electroslag remelting process

    Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Investigation on Peritectic Solidification using a Transparent Organic System

    Mogeritsch, J., 2012, 162 p.

    Research output: Thesis › Doctoral Thesis

  272. Published

    Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot

    Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  273. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul I

    Vakhrushev, A., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  274. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul II

    Karimi Sibaki, E., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  275. Published

    Jahresbericht MCL Projekt A1.1.

    Domitner, J., Hölzl, C., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  276. Published

    Jahresbericht MCL Projekt A1.2.

    Bohacek, J., Ludwig, A. & Wu, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  277. Published

    Jahresbericht MCL Projekt A1.4

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  278. Published

    Jahresbericht Quench-IT

    Unterreiter, G. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  279. Published

    Microstructure formation in the two phase region of the binary peritectic organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 2012, Materials Research in Microgravity 2012. p. 48-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Modeling of multiphase and multiscale phenomena in materials processing

    Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  281. Published

    Multiphase modelling of the macrosegregation in ingot castings

    Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  282. Published

    Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots

    Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  283. Published

    Simulation druckdichter Aluminium-Gussteile

    Vaas, S., 2012

    Research output: Thesis › Master's Thesis

  284. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study

    Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429

    Research output: Contribution to journal › Article › Research › peer-review

  285. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification

    Li, J., Wu, M., Hao, J. & Ludwig, A., 2012, In: Computational materials science. 55, p. 407-418

    Research output: Contribution to journal › Article › Research › peer-review

  286. Published

    Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model

    Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  287. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification

    Kharicha, A., 2012, Metall. Mater. Trans. A.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  288. Published

    Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation

    Grasser, M., Ludwig, A. & Schillinger, W., 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, p. E1-7

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  290. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012, IOP Conf. Series: Materials Science and Engineering. p. 012058-1-012058-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  291. Published

    Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

    Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 945-964

    Research output: Contribution to journal › Article › Research › peer-review

  292. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  293. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  294. 2011
  295. Published

    Numerical study and experimental investigation of solidification phenomena in semi-continuous casting of Bronze

    Hao, J., Grasser, M., Wu, M. & Ludwig, A., 11 Jan 2011, Materials Processing Technologies. p. 1401-1404 4 p. (Advanced Materials Research; vol. 154-155).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  296. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  298. Published

    3d simulation of the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  299. Published

    3D simulation of the melting during an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  300. Published

    A 3-phase model for mixed columnar-equiaxed solidification in DC casting of bronze

    Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  301. Published

    A numerical study on the principle of mechanical softreduction for reducing the centreline segregation in slab casting

    Wu, M., Domitner, J., Ludwig, A. & Mayer, F., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 4.1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    Coupling the turbulent flow with the solidification processes in OpenFOAM®

    Wu, M., Ludwig, A., Vakhrushev, A., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of Open Source CFD Int. Conf. 2011. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Droplet formation in small electroslag remelting processes

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  304. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng.. Vol. 27. p. 012028-012032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    In-situ Observation of Coupled Growth Morphologies in Organic Peritectics

    Mogeritsch, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  306. Published

    In-situ Observation of Coupled Peritectic Growth

    Ludwig, A. & Mogeritsch, J., 2011, Solidification Science and Technology: Proceedings of the John Hunt International Symposium. p. 233-242

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  308. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs- Umschmelzvorgängen

    Wu, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  309. Published

    Liquid metal inside a horizontally rotating cylinder under vibrations

    Bohàcek, J., Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of Experimental Fluid Mechanics (EFM 2011). p. 564-573

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  310. Published

    Modeling of Heat Transfer and Solidification Processes in Thin Slab Caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, European Continous Casting Conference ECCC 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  311. Published

    Modeling of nonmetallic inclusions and gas bubbles motion in continuous caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 17.1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  312. Published

    Modeling the Formation and the Reduction of Macrosegregation in Continuously Cast Steel Slabs

    Domitner, J., Wu, M., Mayer, F., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2011, Proceedings of the 7th European Continuous Casting Conference (ECCC 2011). p. 6.1-6.8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  313. Published

    Numerical microstructure prediction for an aluminium casting and its experimental validation

    Unterreiter, G., Ludwig, A. & Wu, M., 2011, In: China Foundry. 8, 3, p. 331-336

    Research output: Contribution to journal › Article › Research › peer-review

  314. Published

    Numerical Study and experiment investigation of solidification phenomena in semi-continuous casting of Bronze

    Hao, J., Grasser, M., Wu, M. & Ludwig, A., 2011, In: Advanced materials. 154-155, p. 1401-1414

    Research output: Contribution to journal › Article › Research › peer-review

  315. Published

    Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Colummar Solidification

    Hao, J., Wu, M., Ludwig, A. & Grasser, M., 2011, In: Advanced materials. 154-155, p. 1415-1418

    Research output: Contribution to journal › Article › Research › peer-review

  316. Published

    Simulation of the deformation of a flexible combo bag in a DC aluminium casting

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of TMS Annual Meeting. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  317. Published

    Simulation of the melting of a flat electrode during an elektroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 19.1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  318. Published

    Spatio-temporal variation of the electromagnetic field during the electroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, 8th Int. Pamir Conf. on Fund. and Applied MHD (PAMIR). p. 695-699

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  319. Published

    Study of the channel segregation using a two-phase columnar solidification model

    Li, J., Wu, M., Hao, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  320. Published

    Thermal state of the electrode during the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Liquid Metal Processing and Casting. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  321. Published

    Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

    Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In: International journal of multiphysics. p. 209-217

    Research output: Contribution to journal › Article › Research › peer-review

  322. 2010
  323. Published

    3-D microprobe analysis of dendritic structures in steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 30 Nov 2010, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. p. 735-743 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  324. Published

    3D Microprobe Analysis of Dendritic Structures in Steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 2010,

    Proceedings of the International Conference on Materials Science & Technology (MS&T'10)

    .     p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  325. Published

    A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification

    Ludwig, A., Kharicha, A. & Domitner, J., 2010, A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification. p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  326. Published

    Columnar to Equiaxed Transition During Ingot Casting Using Ternary Alloy Composition

    Könözsy, L., Ishmurzin, A., Grasser, M., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2010, In: Materials Science Forum. 649, p. 349-354

    Research output: Contribution to journal › Article › Research › peer-review

  327. Published

    Durchgängige Simulation des Herstellprozesses eines A356-Gussteils

    Unterreiter, G., Wlanis, T., Oberwinkler, C., Redik, S., Pabel, T. & Kneißl, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  328. Published

    Erstarrungssimulation im Strangguss von Bronze zur Bestimmung von Makroseigerungseffekten

    Hao, J., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, DGM JSymposium Stranggiessen 2010, ed. H.R Müller, Werkstoffinformationsgesellschaft. p. 99-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  329. Published

    Experimental Investigation on the Ternary Phase Diagram Cu-Sn-P

    Grasser, M., Ludwig, A. & Schillinger, W., 2010, Copper 2010. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  330. Published

    Importance of Melt Flow in Solidifying Mushy Zone

    Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  331. Published

    Influence of an imposed vertical current on the droplet formation during a melting process

    Kharicha, A. & Ludwig, A., 2010, Influence of an imposed vertical current on the droplet formation during a melting process. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  332. Published

    Influence of the slag/pool interface on the solidification in an electroslag remelting process

    Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In: Materials Science Forum. p. 229-236

    Research output: Contribution to journal › Article › Research › peer-review

  333. Published

    In situ observation of solidification in an organic peritectic alloy system

    Mogeritsch, J., Eck, S., Grasser, M. & Ludwig, A., 2010, In: Materials Science Forum. p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  334. Published

    Interaction of a Flexible Combo Bag with the Flow in a DC Aluminium Casting DGM

    Kharicha, A., Ludwig, A. & Wu, M., 2010, Symposium Stranggiessen 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  335. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  336. Published

    Macrosegregation Prediction for DC Casting of Ternary Bronze Alloys

    Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, Copper. p. 65-80

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  337. Published

    Method for a through-process simulation of an aluminium casting

    Unterreiter, G., Ludwig, A., Wu, M., Wlanis, T., Sommitsch, C. & Mayer, F., 2010, Method for a through-process simulation of an aluminium casting. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  338. Published

    Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part II: Illustrative modeling results and parameter studies

    Wu, M., Ludwig, A. & Fjeld, A., 2010, In: Computational materials science. 50, p. 32-42

    Research output: Contribution to journal › Article › Research › peer-review

  339. Published

    Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part I: Model description

    Wu, M., Fjeld, A. & Ludwig, A., 2010, In: Computational materials science. 50, p. 43-58

    Research output: Contribution to journal › Article › Research › peer-review

  340. Published

    Modeling of Turbulent Melt Flow and Solidification Processes in Steel Continuous Caster with the Open Source Software Package OpenFOAM

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2010, Open Source CFD Int. Conf. 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  341. Published

    Numerical and Experimental Investigation of NH4Cl Solidification

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2010, In: Materials Science Forum. 649, p. 367-372

    Research output: Contribution to journal › Article › Research › peer-review

  342. Published

    On the Formation of Centreline Segregation in Continuous Slab Casting of Steel due to Bulging and/or Feeding

    Mayer, F., Wu, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 660-667

    Research output: Contribution to journal › Article › Research › peer-review

  343. Published

    On the origin of the resistance swing during the Electro-Slag remelting process

    Kharicha, A., 2010, On the origin of the resistance swing during the Electro-Slag remelting process. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  344. Published

    Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns

    Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651

    Research output: Contribution to journal › Article › Research › peer-review

  345. 2009
  346. Published

    Flow patterns and re-melting during filling of a large composite casting

    Fjeld, A. & Ludwig, A., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 111-114 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  347. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  348. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  349. Published

    Experimental and numerical modeling of the flow field in an industrial bronze caster - Improving the numerical model

    Eck, S., Pfeiler, C., Kharicha, A., Ludwig, A. & Evans, J. W., 24 Jun 2009, TMS Annual Meeting. p. 635-642 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Thermal stability of a binary non-faceted/non-faceted peritectic organic alloy at elevated temperatures

    Mogeritsch, J. P., Ludwig, A., Eck, S., Grasser, M. & McKay, B. J., 1 May 2009, In: Scripta materialia. 60, 10, p. 882-885 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  351. Published

    2nd Int. Conf. on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria: Preface

    Eck, S., 2009, In: International journal of cast metals research. 22, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  352. Published

    An Idea to Treat the Dendritic Morphology in the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 323-327

    Research output: Contribution to journal › Article › Research › peer-review

  353. Published

    Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?

    Mayer, F., Wu, M. & Ludwig, A., 2009, Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?. ASMET, p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  354. Published

    Development of a Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel

    Domitner, J., Fluch, J., Grasser, M. & Ludwig, A., 2009, Proceedings of the 3rd International Conference on Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2009). p. 128-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  355. Published

    Einfluss starker Konvektion während des Abfüllens in großindustriellen Gießereiprozessen

    Fjeld, A. & Ludwig, A., 2009, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  356. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental results

    Stefan Kharicha, M., Eck, S., Könözsy, L., Kharicha, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 168 - 171 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  357. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 2: numerical results

    Könözsy, L., Eck, S., Stefan Kharicha, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 172-174 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  358. Published

    Experimental and Numerical Modelling of the Flow Field in a CuxSny Direct Chill Caster

    Eck, S., Pfeiler, C., Mayer, F., Ludwig, A. & Evans, J. W., 2009, In: International journal of cast metals research. 22, p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  359. Published

    Flow Patterns and Re-melting during the Filling of a Large Composite Casting

    Fjeld, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 111-114

    Research output: Contribution to journal › Article › Research › peer-review

  360. Published

    Impurities in Al-5Ti-1B grain refiner rod

    McKay, B. J., Nunner, G., Geier, G. F. & Schumacher, P., 2009, In: International journal of cast metals research. 22, 1-4, p. 212-215 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  361. Published

    Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes

    Fjeld, A. & Ludwig, A., 2009, Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes. ASMET, p. 292-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  362. Published

    In-situ Observation of Unsteady Peritectic Growth Modes

    Ludwig, A., Mogeritsch, J. & Grasser, M., 2009, In: Transactions of the Indian Institute of Metals. p. 433-436

    Research output: Contribution to journal › Article › Research › peer-review

  363. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  364. Published

    Macrosegregation Prediction for Ternary Bronze Alloys International Foundary Research

    Grasser, M., Hao, J., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, In: International foundry research (Giessereiforschung ; official journal of World Foundrymen Organization). 61, p. 42-45

    Research output: Contribution to journal › Article › Research › peer-review

  365. Published

    Micro-Macrosegregation prediction based on solidification simulation for continuous casting of ternary bronze alloys

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding, and advanced solidification processes - XII. p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  366. Published

    Microstructure Prediction Based on Ternary Solidification Simulation for Continuous Casting of Bronze

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding and advanced solidification processes XII: proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes held in Vancouver, BC, Canada on June 7 - 14, 2009 . Cockcroft, S. L. & Maijer, D. J. (eds.). Warrendale: TMS, p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  367. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644

    Research output: Contribution to journal › Article › Research › peer-review

  368. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631

    Research output: Contribution to journal › Article › Research › peer-review

  369. Published

    Modelling and Simulation of Solidification of High Grade Steel Ingot Castings

    Ishmurzin, A., 2009

    Research output: Thesis › Doctoral Thesis

  370. Published

    Numerical and Experimental Investigation of NH4Cl Solidification in a Mould. Part 2: Numerical Results

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 172-174

    Research output: Contribution to journal › Article › Research › peer-review

  371. Published

    Numerical Investigation of Grid Influence for Formation of Macrosegregation

    Könözsy, L., Ishmurzin, A., Mayer, F., Grasser, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 175-178

    Research output: Contribution to journal › Article › Research › peer-review

  372. Published

    Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159

    Research output: Contribution to journal › Article › Research › peer-review

  373. Published

    Stability investigations of a binary organic alloy system with a peritectic phase diagram

    Ludwig, A., Mogeritsch, J., Grasser, M., Eck, S. & McKay, B., 2009, In: Scripta materialia. p. 882-885

    Research output: Contribution to journal › Article › Research › peer-review

  374. Published

    Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach

    Ludwig, A., Mayer, F. & Wu, M., 2009, Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach. p. 279-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  375. Published

    Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP

    Grasser, M., Mayer, F. & Ludwig, A., 2009, Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP. p. 47-54

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  376. Published

    The validation of a multiphase model for the macrosegregations and primary structure of high grade steel ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  377. Published

    Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification. p. 537-544

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  378. Published

    Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots

    Ishmurzin, A., Tanzer, R., Schuetzenhoefer, W., Reiter, G., Fauland, H. P., Könözsy, L., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  379. Published

    Verbesserte metallurgische Prozesse durch moderne Simulationstechnik

    Odenthal, H. J., Rexroth, C. H., Sommerfeld, M., Ludwig, A., Baake, E. & Thess, A., 2009, In: Stahl und Eisen. 129, p. 37-46

    Research output: Contribution to journal › Article › Research › peer-review

  380. 2008
  381. Published

    A study on macrosegregation in continuous casting of bronze

    Grasser, M., 2008

    Research output: Thesis › Doctoral Thesis

  382. Published

    Curve Fitting on Empirical Data When Both Variables are Loaded by Errors

    Könözsy, L. & Nyiri, A., 2008, In: Annals of Faculty Engineering Hunedoara – International Journal of Engineering. 6, 2, p. 201-212

    Research output: Contribution to journal › Article › Research › peer-review

  383. Published

    Experimental and Numerical Investigation of Wood Drying Process Using Modified Infra-Red Heating Treatment

    Cserta, E., Könözsy, L., Hegedus, G. & Raupenstrauch, H., 2008, Experimental and Numerical Investigation of Wood Drying Process Using Modified Infra-Red Heating Treatment.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  384. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  385. Published

    Metastable Solidification of Composites: Novel Peritectic Structures – Studies with Transparent Model Alloys

    Mogeritsch, J., 2008, ASAP Success Stories der 3. und 4. Ausschreibung. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  386. Published

    Modeling and Simulation of a Large Composite Casting

    Autumn, F. & Ludwig, A., 2008, EPD Congress 2008. p. 281-291

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  387. Published

    Modeling of the ESR Slag/pool interface with a VOF method

    Kharicha, A., 2008, 5th Int. Conf. on Solidification and Gravity (SG08).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  388. Published

    Modeling of Turbulent Particle/Gas Dispersion in the Mold Region and Particle Entrapment into the Solid Shell of a Steel Continuous Caster

    Pfeiler, C., 2008

    Research output: Thesis › Doctoral Thesis

  389. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Ludwig, A., Wu, M., Pfeiler, C. & Mayer, F., 2008, Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting. p. 30-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  390. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Wu, M., Ludwig, A., Pfeiler, C. & Mayer, F., 2008, In: Journal of iron and steel research international. 15, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  391. Published

    Multiphase/multicomponent modeling of solidification processes: Coupling solidification kinetics with thermodynamics

    Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99.2008, 6, p. 618-625 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  392. Published

    Numerical Modeling of the Effect of Global Transport Phenomena on the Microstructure Formation

    Grasser, M., Mayer, F., Ishmurzin, A., Könözsy, L., Wu, M. & Ludwig, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 278-281

    Research output: Contribution to journal › Article › Research › peer-review

  393. Published

    On the Formation of Macrosegregations in Steel Ingot Castings

    Wu, M., Könözsy, L., Ludwig, A., Schützenhöfer, W. & Tanzer, R., 2008, In: Steel research international. 79, p. 637-644

    Research output: Contribution to journal › Article › Research › peer-review

  394. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

  395. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  396. 2007
  397. Published

    Lead-free bearing alloys for engine applications results of the ESA-MAP project MONOPHAS

    Ratke, L., Brück, S., Mathiesen, R., Ludwig, A., Gruber-Pretzler, M., Tonn, B., Gzovskyy, K., Gránásy, L., Tegze, G., Agren, J., Höglund, L., Arnberg, L., Gust, E., Anger, G., Lauer, M., Garen, R. & Reifenhäuser, B., 1 Apr 2007, In: Transactions of the Indian Institute of Metals. 60, 2-3, p. 103-111 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  398. Published

    A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation. p. 130-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  399. Published

    Calibration, Measurement and Error Analysis of Optical Temperature Measurement via Laser Induced Fluorescence

    Harker, M., O'Leary, P., Stefan Kharicha, M. & Eck, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  400. Published

    Calibration, Measurement and Error Analysis of Optical Temperature Measurement via Laser Induced Fluorescence

    Harker, M., O'Leary, P., Stefan Kharicha, M. & Eck, S., 2007, Proceedings of the IEEE Instrumentation and Measurement Technology Conference 2007. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  401. Published

    Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M., Tanzer, R. & Schützenhöfer, W., 2007, Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations. p. 493-496

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  402. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  403. Published

    Eulerian multiphase modeling of solidification processes

    Wu, M., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  404. Published

    Experimental and Numerical Modelling of Cu-Sn Casting with Adjustable Solidification Front

    Eck, S., Ludwig, A., Mazumdar, D. & Evans, J. W., 2007, International Conference on Solidification Processing. p. 483-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. Published

    Future Facilities for In-situ Observation of Solidification Processes

    Voss, D., Bottin-Rousseau, S., Mogeritsch, J. & Behrmann, B., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  406. Published

    Interaction between steel droplets and slag in the ESR process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  407. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  408. Published

    Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  409. Published

    Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  410. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  411. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  412. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  413. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  414. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  415. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  416. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  417. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  418. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  419. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  420. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  421. 2006
  422. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  423. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  424. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  425. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  426. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  427. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  428. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  429. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  430. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  431. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  432. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  433. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In: Materials Science Forum. p. 157-162

    Research output: Contribution to journal › Article › Research › peer-review

  434. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Eck, S., Ludwig, A. & Mogeritsch, J., 2006, Materials Science Forum Vol. 508. p. 157-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  435. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum. 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  436. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  437. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  438. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  439. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-II. Application of model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  440. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-I. three phase flow model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  441. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  442. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  443. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  444. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  445. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  446. Published

    Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique

    Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  447. Published

    Strangguss von Bronze. Mehrphasensimulation: Modellierung und Simulation der auftretenden Phasen und Makroseigerungen beim Strangguss von CnSnP

    Gruber-Pretzler, M., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  448. Published

    Strangguss von Stahl. Mehrphasensimulation: Bewegung von nicht metallischen Einschlüssen und Argonblasen im Bereich Tauchrohr/Kokille sowie den Einbau von Einschlüssen in die Strangschale

    Pfeiler, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  449. Published

    Strangguss von Stahl – Mehrphasensimulation: Modellierung der deformationsindu-zierten Verringerung von Makroseigerungen sowie Schrumpfungsporositäten während der Softreduktion von Stahl

    Mayer, F., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  450. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  451. 2005
  452. Published

    A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  453. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  454. Published

    Construction of a radial heat flow apparatus for measuring the solid-liquid interface energies of ternary alloy systems

    Carreno Bodensiek, C. G., 2005, 188 p.

    Research output: Thesis › Doctoral Thesis

  455. Published

    Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  456. Published

    Hydrodynamic Study of a Rotating MHD Flow in a Cylindrical Cavity by Ultrasound Doppler Shift Method

    Kharicha, A., Alemany, A. & Bornas, D., 2005, In: International journal of engineering science. 43, p. 589-615

    Research output: Contribution to journal › Article › Research › peer-review

  457. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  458. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  459. Published

    Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

    Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  460. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  461. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  462. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

  463. Published

    Numerical Description of Particle and Bubble Motion in the Submerged Entry Nozzle Region during Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, STEELSIM 2005. p. 231-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  464. Published

    Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification

    Wu, M., Ludwig, A. & Luo, J., 2005, In: Materials Science Forum. 475-479, p. 2725-2730

    Research output: Contribution to journal › Article › Research › peer-review

  465. Published

    On Distortions and Gap Formation during Solidification and Subsequent Cooling of a Cylindrical Casting

    Ludwig, A., Kron, J., Bellet, M., Pustal, B., Fredrikson, H. & Wendt, J., 2005, In: International journal of cast metals research. p. 295-310

    Research output: Contribution to journal › Article › Research › peer-review

  466. Published

    On the Impact of Macroscopic Phase Separation on Solidification Microstructures

    Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, In: Advanced Engineering Materials. 7-9, p. 846-851

    Research output: Contribution to journal › Article › Research › peer-review

  467. Published

    Reduction of Vanadium-oxide monolayer structures

    Schoiswohl, J., Surnev, S., Sock, M., Eck, S., Kresse, G., Ramsey, M. G. & Netzer, F. P., 2005, In: Physical review : B, Condensed matter and materials physics. 71, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  468. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  469. Published

    Simulation of Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2005, In: Transactions of Nonferrous Metals Society of China. 15, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  470. Published

    Simulation of droplet formation during DC Electroslag-remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  471. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  472. Published

    Vanadium oxide nanostructures on Rh(111): Promotion effect of CO adsorption and oxidation

    Schoiswohl, J., Eck, S., Ramsey, M. G., Andersen, J. N., Surnev, S. & Netzer, F. P., 2005, In: Surface Science. 580, p. 122-136

    Research output: Contribution to journal › Article › Research › peer-review

  473. 2004
  474. Published

    About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation

    Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  475. Published

    Atomic Level growth study of vanadium oxide nanostructures on Rh(111)

    Schoiswohl, J., Sock, M., Eck, S., Surnev, S., Ramsey, M. G., Netzer, F. P. & Kresse, G., 2004, In: Physical review : B, Condensed matter and materials physics. 69, p. 1-15

    Research output: Contribution to journal › Article › Research › peer-review

  476. Published

    Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification

    Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  477. Published

    Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys

    Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  478. Published

    Consecutive process and microstructure modelling for aluminium sheet production

    Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31

    Research output: Contribution to journal › Article › Research › peer-review

  479. Published

    Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

    Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546

    Research output: Contribution to journal › Article › Research › peer-review

  480. Published

    Investigations on peritectic solidification of a binary organic system

    Mogeritsch, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  481. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  482. Published

    Modeling Macroscopic phase separation phenomena during solidification with an Eulerian multiphase approach

    Wu, M. & Ludwig, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 239-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  483. Published

    Modeling of Free Surface and Thermo-Solutal Convection by a Three-Phase Model

    Wang, T., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 181-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  484. Published

    Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT

    Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655

    Research output: Contribution to journal › Article › Research › peer-review

  485. Published

    On convection induced phase separation during solidification

    Ludwig, A. & Wu, M., 2004, Multiphase Phenomena in Materials Processing. p. 93-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  486. Published

    On the interaction between macrosegregation, shrinkage flow and grain movement

    Ludwig, A., Wu, M. & Eck, S., 2004, Solidification processes and microstructures: A Symposium in honour of Wilfried Kurz. p. 99-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  487. 2003
  488. Published

    Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 3009-3019 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  489. Published

    Adsorption and reaction of CO on a ceria-Rh(111) "inverse model catalyst" surface

    Eck, S., Castellarin-Cudia, C., Prince, K. C., Ramsey, M. G. & Netzer, F. P., 2003, In: Surface Science. 536, p. 166-176

    Research output: Contribution to journal › Article › Research › peer-review

  490. Published

    Cooperation within MEBSP on the Subject of Air Gap Formation during a Casting Process

    Kron, J., Bellet, M., Ludwig, A., Wendt, J., Pustal, B. & Fredrikson, H., 2003, In: Advanced Engineering Materials. 5, p. 78-79

    Research output: Contribution to journal › Article › Research › peer-review

  491. Published

    Grain evolution and macrosegregation in Al-4.0wt.%Cu casting: simulation and experimental evaluation

    Wu, M., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 261-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  492. Published

    Growth of ordered bithiophene layers on the p(2x1) reconstructed Cu(110) surface

    Koller, G., Eck, S., Netzer, F. P. & Ramsey, M. G., 2003, In: Surface Science. 536, p. 155-165

    Research output: Contribution to journal › Article › Research › peer-review

  493. Published

    Influence of Convection and Grain Movement on Globular Equiaxed Solidification

    Wu, M., Ludwig, A., Bührig-Polaczek, A., Fehlbier, M. & Sahm, P. R., 2003, In: International journal of heat and mass transfer. 46, p. 2819-2832

    Research output: Contribution to journal › Article › Research › peer-review

  494. Published

    Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification

    Wu, M. & Ludwig, A., 2003, In: Advanced Engineering Materials. 5, p. 62-66

    Research output: Contribution to journal › Article › Research › peer-review

  495. Published

    Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys

    Ludwig, A., Sahm, P. & Pustal, B., 2003, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. p. 411-419

    Research output: Contribution to journal › Article › Research › peer-review

  496. Published

    Microstructure Control by Solidification Processing – Outcome from a European Thematic Network

    Lacaze, J., Greer, L., Howe, A., Ludwig, A. & Fredrikson, H., 2003, In: Advanced Engineering Materials. 5, p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  497. Published

    Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  498. Published

    Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, p. 3009-3019

    Research output: Contribution to journal › Article › Research › peer-review

  499. Published

    Modeling the decomposition and phase separation during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  500. Published

    Modelling the solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. 11, p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  501. Published

    Multiphase simulation of transport phenomena during solidification processes

    Ludwig, A. & Wu, M., 2003, Modellbildung und Simulation in der Werkstoff-Schweiß- und Umformtechnik. p. 11-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  502. Published

    Split-Solid-Model to Simulation the Formation of Shrinkage Cavities and Macrosegregation in Steel Casting

    Ehlen, G., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  503. Published

    Study of rheology of semisolid alloys within a capillary viscometer

    Ludwig, A., Wu, M. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 191-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  504. Published

    Time Dependent Simulation of Pool Shape during Laser Spot Welding

    Ludwig, A., Sahm, P. & Ehlen, G., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 2947-2961

    Research output: Contribution to journal › Article › Research › peer-review

  505. 2002
  506. Published

    Growth and thermal properties of ultrathin cerium oxide layers on Rh(111)

    Eck, S., Castellarin-Cudia, C., Surnev, S., Ramsey, M. G. & Netzer, F. P., 2002, In: Surface Science. 520, p. 173-185

    Research output: Contribution to journal › Article › Research › peer-review

  507. Published

    Influence of Welding Power and Welding Duration on the Shape of the Weld Pool: Transient Effects

    Ludwig, A., Ehlen, G. & Sahm, P., 2002, Mathematical Modelling of Weld Phenomena V. p. 161-192

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  508. Published

    Modeling of Globular Equiaxed Solidification with a Two-Phase Approach

    Ludwig, A. & Wu, M., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 3673-3683

    Research output: Contribution to journal › Article › Research › peer-review

  509. Published

    Thermophysical Properties Necessary for Advanced Casting Simulations

    Ludwig, A., 2002, In: International journal of thermophysics. p. 1131-1135

    Research output: Contribution to journal › Article › Research › peer-review

  510. 2001
  511. Published

    Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature

    Ludwig, A., 2001, In: Acta materialia. p. 165-169

    Research output: Contribution to journal › Article › Research › peer-review

  512. Published

    General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

    Ludwig, A. & Pustal, B., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 337-340

    Research output: Contribution to journal › Article › Research › peer-review

  513. Published

    How to Find Thermophysical Material Property Data for Casting Simulations?

    Ludwig, A., 2001, In: Advanced Engineering Materials. p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  514. 2000
  515. Published

    Influence of Convection and Surface Effects on Macrosegregations in Eutectic and Peritectic Systems

    Ludwig, A., Ehlen, G. & Sahm, P., 2000, In: Materials Science Forum. p. 105-109

    Research output: Contribution to journal › Article › Research › peer-review

  516. Published

    Pattern Formation during Solidification of non-Faceting Systems

    Ludwig, A., 2000

    Research output: Book/Report › Book › Research

  517. Published

    Solute Trapping in Highly Undercooled Succinonitrile-Acetone Alloys

    Ludwig, A. & Ehlen, G., 2000, In: Materials Science Forum. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  518. 1999
  519. Published

    Dendritic and Cellular Doublets: Morphologies of Thin Solid Films Growing Along a Substrate During the Initial State of the Solidification of Bulk Melts

    Ludwig, A., 1999, In: Physical review : E, Statistical, nonlinear and soft matter physics. p. 1893-1897

    Research output: Contribution to journal › Article › Research › peer-review

  520. Published

    General Theory for Eutectic Solidification

    Ludwig, A., 1999, Solidification of Metallic Melts in Research and Technology. p. 55-59

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  521. Published

    Numerical Simulation and Experimental Results of in-situ Heat Treated Austempered Ductile Iron

    Ludwig, A. & Sahm, P., 1999, In: International journal of cast metals research. p. 483-486

    Research output: Contribution to journal › Article › Research › peer-review

  522. Published

    Time Dependent Interface Stability During Rapid Solidification

    Ludwig, A. & Sahm, P., 1999, In: Journal of applied physics. p. 3682-3687

    Research output: Contribution to journal › Article › Research › peer-review

  523. 1998
  524. Published

    Morphological Stability of a Planar Interface Subject to Rapid Quenching

    Ludwig, A. & Sahm, P., 1998, In: Journal of crystal growth. p. 291-296

    Research output: Contribution to journal › Article › Research › peer-review

  525. Published

    Numerical Simulation of Microstructure Formation during Electron-Beam Surface Remelting of an Al-Si Alloy

    Ludwig, A. & Sahm, P., 1998, Mathematical Modelling of Weld Phenomena IV. p. 332-et seq

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  526. Published

    The Interface Response-Functions in Multi-componental Alloy Solidification

    Ludwig, A., 1998, In: Physica D: Nonlinear phenomena. 124, p. 271-275

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 3101