Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

601 - 700 out of 2,143Page size: 100

Publications / Theses

  1. 2015
  2. Published

    The 2sDR process - Innovative treatment of Electric Arc Furnace Dust

    Wegscheider, S., Steinlechner, S., Pichler, C., Rösler, G. & Antrekowitsch, J., 14 Sept 2015, Wastes: Solutions, Treatments and Opportunities.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Recycling of Zinc and Lead Bearing Residues with Pyrolysis Gas

    Pichler, C. & Antrekowitsch, J., 9 Sept 2015, In: JOM. 67, 9, p. 2038 2046 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Recycling technologies for rare earths

    Luidold, S., 9 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Electrochemical and microstructural characteristics of 3xxx based interlayers in high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 8 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Lead Slag – A possible secondary resource to recover valuable metals out of a waste

    Rösler, G., 8 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  7. Published

    Motivation und Aufgabenstellung im Bereich der Technologiemetalle

    Luidold, S., 3 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Thermodynamic Considerations for Primary Copper Flue Dust

    Steinacker, S. & Antrekowitsch, J., 3 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys

    Hofstetter, J., Martinelli, E., Pogatscher, S., Schmutz, P., Povoden-Karadeniz, E., Weinberg, A. M., Uggowitzer, P. J. & Löffler, J. F., 1 Sept 2015, In: Acta biomaterialia. 23, p. 347-353 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Recycling of Nd2Fe14B magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 1 Sept 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68, 5, p. 278-285 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Zwischenbericht (Jahr 1) - Research Studio Austria - RessouRec

    Steinlechner, S., Pichler, C. & Antrekowitsch, J., Sept 2015

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry

    Steinacker, S., Antrekowitsch, J. & Schnideritsch, H., 25 Aug 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry

    Steinacker, S., Antrekowitsch, J. & Schnideritsch, H., 23 Aug 2015, Proceedings of the 54th Annual Conference of Metallurgists hosting America's Conference on Aluminum Alloys. Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

    Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 22 Aug 2015, In: Acta materialia. 98, p. 423-432 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Aufarbeitung eines EAF Staubes in einem Zwei-Stufen-Konzept mit dem Ziel einer optimierten Zinkoxid Qualität

    Wegscheider, S., Steinlechner, S. & Rösler, G., 12 Aug 2015

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Aufarbeitung eines EAF Staub-Gemisches in einem Zwei-Stufen-Konzept mit dem Ziel einer optimierten Zinkoxid Qualität

    Wegscheider, S., Steinlechner, S. & Rösler, G., 12 Aug 2015

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses

    Thurnheer, P., Maaß, R., Laws, K. J., Pogatscher, S. & Löffler, J. F., 29 Jul 2015, In: Acta materialia. 96, p. 428-436 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Anodizing of secondary aluminium

    Schlögl, C., 30 Jun 2015, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Recycling Potential of Precious Metals From Zinc, Lead and Copper Containing Residues.

    Steinlechner, S., 17 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Development of a lead-free brass alloy

    Angerer, T., 16 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Anodizing of secondary aluminium

    Schlögl, C. & Antrekowitsch, H., 15 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Development of a lead-free brass alloy

    Angerer, T. & Hofer, S., 15 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Effects of pyrolysis on the metallurgical processing of waste electrical and electronic equipment

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 15 Jun 2015, p. 819-831.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Effects of Pyrolysis on the Metallurgical Processing of Waste Electrical and Electronic Equipment

    Sorger, C., 15 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Effects of Pyrolysis on the Metallurgical Processing of Waste Electrical and Electronic Equipment

    Sorger, C., 15 Jun 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 15 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 15 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Recycling Potential of Precious Metals From Zinc, Lead and Copper Containing Residues.

    Steinlechner, S., 15 Jun 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. GDMB, Vol. 1. p. 121-137 17 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Sustainable Recovery of Heavy Metals from Metallurgical Dust – the 2sDR process

    Rösler, G., Pichler, C., Wegscheider, S. & Antrekowitsch, J., 15 Jun 2015, Proceedings PbZn 2015: Volume 2. GDMB, p. 877-886

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Development of a lead-free brass alloy

    Angerer, T., Hofer, S. & Antrekowitsch, H., 14 Jun 2015, EMC 2015: Production of non-ferrous metals-indispensable foundation for the industry and our prosperity. Clausthal-Zellerfeld, Vol. 1. p. 226-230 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Recycling of aluminium powdered waste

    Zöhrer, M. & Angerer, T., 14 Jun 2015, p. 1132. 1133 p.

    Research output: Contribution to conference › Poster › Transfer

  32. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., 14 Jun 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 14 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 14 Jun 2015, Proceedings of European Metallurgical Conference EMC 2015. Deutschland: GDMB

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Wet chemical decoating of metal cutting tools

    Ebner, T. & Kücher, G., 14 Jun 2015. 1 p.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Projektpräsentation - Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 2/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Jun 2015, In: Metall. 69, 6, p. 240-244 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Alternative Models for Calculation of CAPEX and OPEX for Hydrometallurgical Plant

    Osthof, H., Steinlechner, S. & Antrekowitsch, J., Jun 2015, Copper Cobalt Africa 2015: The 8th Southern African Base Metals Conference. p. 439-444 6 p. (Symposium Series S83).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015.

    Research output: Contribution to conference › Abstract › peer-review

  41. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. Vol. 2.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Entwicklung einer bleifreien Messinglegierung

    Angerer, T. & Hofer, S., 19 May 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Rasche Warmauslagerung von Al-Mg-Si Legierungen

    Werinos, M. & Antrekowitsch, H., 19 May 2015.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Recycling von Reststoffen aus der Kupfer-Metallurgie

    Steinacker, S., 19 May 2015.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Rapid artificial aging of Al-Mg-Si alloys

    Werinos, M. & Antrekowitsch, H., 15 May 2015.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Werkstoffentwicklung von Cu-Basislegierungen

    Angerer, T., 12 May 2015.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Optimierung von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015, Mineralische Nebenprodukte und Abfälle 2: Aschen, Schlacken, Stäube und Baurestmassen. Neuruppin

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Agglomeration und Verwertung aluminiumhaltiger Reststoffe

    Zöhrer, M. & Angerer, T., May 2015.

    Research output: Contribution to conference › Poster › Transfer

  52. Published

    Aktivitäten Stefan Steinlechner NEM

    Steinlechner, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Anwendung selektiver Metallbadprozesse zur Multimetallrückgewinnung aus komplexen Reststoffen

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Der 2sDR Prozess - Eine zukunftsorientierte Möglichkeit zur Aufarbeitung von EAF-Stäuben

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Poster › Research

  55. Published

    Einführung in die Metallurgie

    Antrekowitsch, H., 30 Apr 2015.

    Research output: Contribution to conference › Presentation › Education › peer-review

  56. Published

    Prozessentwicklung zur metallurgischen Verwertung von Elektroaltgeräten

    Sorger, C., 25 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Product upgrade of Waelz oxide using an altenative method

    Rösler, G. & Antrekowitsch, J., 9 Apr 2015. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  58. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 31 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  59. Published

    Microstructural evolution and barrier layer dissolution during brazing of high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 21 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  60. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., 17 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  62. Published

    Example of the Refractory Corrosion Test Work with Nickel Matte

    Gregurek, D., Ressler, A., Spanring, A. & Pichler, C., 15 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 1/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Mar 2015, In: Metall. 3, p. 82-87 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Recycling in der Automobilindustrie: Ist damit eine Rohstoffversorgung zukünftig gesichert?

    Antrekowitsch, H., 25 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  65. Published

    Quench-induced precipitates in Al-Si alloys: Calorimetric determination of solute content and characterisation of microstructure

    Schumacher, P., Pogatscher, S., Starink, M. J., Schick, C., Mohles, V. & Milkereit, B., 20 Feb 2015, In: Thermochimica Acta. 602, p. 63-73

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 16 Feb 2015, 36 p.

    Research output: Book/Report › Other report › Research

  67. Published

    Stabilisierungsbehandlung und Verstrecken in 6xxx-Blechwerkstoffen sowie Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten

    Werinos, M. & Antrekowitsch, H., 9 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Potential of a Hydrometallurgical Recycling Process for Catalysts to Cover the Demand for Critical Metals, Like PGMs and Cerium

    Steinlechner, S., Feb 2015, In: JOM. 67, 2, p. 406-411 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 15 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  70. Published

    AFM and KPFM investigation of high strength aluminium brazing sheets

    Huszar, M., Kremmer, T., Kratzer, M., Oberhauser, P., Antrekowitsch, H. & Teichert, C., 2015.

    Research output: Contribution to conference › Poster › Research

  71. Published

    Agglomeration und Recycling metallhaltiger Reststoffe

    Zöhrer, M., 2015.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie

    Antrekowitsch, H., Luidold, S., Antrekowitsch, J., Pogatscher, S. & Steinlechner, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  73. Published

    Alkalischer Schmelzaufschluss von Leuchtstofffraktionen zur Wiedergewinnung Seltener Erden

    Gstettner, G., 2015

    Research output: Thesis › Master's Thesis

  74. Published

    Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys

    Kolb, G. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Atom Probe Tomography of Early Stage Clustering in Aluminum Alloys

    Pogatscher, S. & Gerstl, S. S. A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    Auswirkung von Elementvariationen auf die Wärmebehandlung und Eloxierbarkeit von EN AW 7075

    Waldsam, F., 2015

    Research output: Thesis › Master's Thesis

  77. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  78. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015, p. 747-758. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  79. Published

    Charakterisierung der Umformbarkeit von 6xxx-Legierungen

    Bolitschek, J., 2015

    Research output: Thesis › Master's Thesis

  80. Published

    Chemische Entschichtung von Hartmetallen

    Kücher, G., 2015

    Research output: Thesis › Master's Thesis

  81. Published

    Christian Doppler Labor für Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  82. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  83. Published

    Concepts to optimize aging of Al-Mg-Si alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  84. Published

    Control of precipitation during heat treatments based on DSC experiments

    Schumacher, P., Pogatscher, S., Starink, M., Keßler, O., Schick, C., Mohles, V. & Milkereit, B., 2015, International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Whistler, Canada, p. 699 706 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Copper Networkingin South East Europe - Potentials and Challenges

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  86. Published

    Editorial 1/2015

    Luidold, S., 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68.2015, 1, p. 1-2 2 p.

    Research output: Contribution to journal › Article › Research

  87. Published

    Einfluss von Legierungselementen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Scheiber, S., 2015

    Research output: Thesis › Master's Thesis

  88. Published

    Einfluss von Wärmebehandlungen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Alf, D., 2015

    Research output: Thesis › Master's Thesis

  89. Published

    Endbericht - Forschungsprojekt BioZInGa

    Steinlechner, S., 2015

    Research output: Book/Report › Commissioned report › Research

  90. Published

    Entwicklung eines Recyclingprozesses zur simultanen Rückgewinnung von Wertmetallen aus Reststoffen der Blei- und Zinkindustrie

    Unger, A., 2015

    Research output: Thesis › Doctoral Thesis

  91. Published

    Extraction of lanthanides from spent polishing agent

    Luidold, S., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. 1 ed. Elsevier, p. 215 228 p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    FFG Endbericht - Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    High Temperature Oxidation of Steel, Aluminum and Copper Alloys under the Influence of a Sustainable Energy-Efficient Combustion in Industrial Furnaces

    Sobotka, C., 2015

    Research output: Thesis › Doctoral Thesis

  94. Published

    HSC-Simulation des Peirce-Smith-Konverters

    Sorger, C., 2015

    Research output: Book/Report › Commissioned report › Research

  95. Published

    Hydrometallurgische Aufarbeitung von Elektronikschrott - erster Überblick

    Sorger, C. & Luidold, S., 2015

    Research output: Book/Report › Commissioned report › Research

  96. Published

    Identification of permanent magnets

    Benedek, L., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Implementation of Alternative Reducing Agents in Metallurgical Operations

    Rösler, G., 2015

    Research output: Thesis › Doctoral Thesis

  99. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Light Metals 2015: TMS (The Minerals, Metals & Materials Society), 2015. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Konzepte zur Optimierung der Ausscheidungsbildung in Al-Mg-Si Legierungen

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1...3 4 5 6 7 8 9 10 ...22 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 5204