Surface & coatings technology, ‎0257-8972

Journal

ISSNs0257-8972
Additional searchable ISSN (electronic)0257-8972
1 - 100 out of 136Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Kainz, C., Czettl, C. & Schalk, N., 11 Feb 2021, In: Surface & coatings technology. 410.2021, 25 March, p. 1-7 7 p., 126959.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 2021, In: Surface & coatings technology. 2021, 421, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 2021, In: Surface & coatings technology. 2021, 418, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 406

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 2021, In: Surface & coatings technology. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 417, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 2021, In: Surface & coatings technology. 2021, 406, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 421, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Pressure- and temperature-dependent diffusion from first-principles: A case study of V and Ti in a TiN matrix

    Nayak, G. K., Popov, M. & Holec, D., 2021, In: Surface & coatings technology. p. 127491 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2020
  12. Published

    Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing

    Gruber, D. P., Zalesak, J., Todt, J., Tkadletz, M., Sartory, B., Suuronen, J. P., Ziegelwanger, T., Czettl, C., Mitterer, C. & Keckes, J., 20 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 9 p., 126181.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films

    Glechner, T., Lang, S., Hahn, R., Alfreider, M., Moraes, V., Primetzhofer, D., Ramm, J., Kolozsvári, S., Kiener, D. & Riedl, H., 19 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 8 p., 126212.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Multilayer coatings based on the combination of perfluorinated organosilanes and nickel films for injection moulding tools

    Calderon, J. C., Koch, L., Bandl, C., Kern, W., Jilg, J., Schilp, C., Moritzer, E. & Grundmeier, G., 8 Jul 2020, In: Surface & coatings technology. 399.2020, 15 October, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The effect of chemical composition on the structure , chemistry and mechanical properties of magnetron sputtered W-B-C coatings : Modeling and experiments

    Mizaei, S., Alishahi, M., Souček, P., Ženíšek, J., Holec, D., Koutná, N., Buršíková, V., Stupavská, M., Zábranský, L., Burmeister, F., Blug, B., Czigány, Z., Balázsi, K., Mikšová, R. & Vašina, P., 15 Feb 2020, In: Surface & coatings technology. 383.2020, 15 February, 12 p., 125274.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Angular-dependent deposition of MoNbTaVW HEA thin films by three different physical vapor deposition methods

    Xia, A., Togni, A., Hirn, S., Bolelli, G., Lusvarghi, L. & Franz, R., 17 Jan 2020, (E-pub ahead of print) In: Surface & coatings technology. 385.2020, March, 8 p., 125356.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Microstructure, mechanical and thermo-physical properties of CVD TiCxN1-x coatings on cemented carbide substrates grown with C2H6 as C feeding precursor

    Kainz, C., Schalk, N., Tkadletz, M., Winkler, M. & Czettl, C., 2020, In: Surface & coatings technology. 2020, 394, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Skordaris, G., Bouzakis, K., Leitner, H. & Ressel, G., 2020, In: Surface & coatings technology. 2020, 394, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 2020, In: Surface & coatings technology. 2020, 404, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Reactively sputtered TiN/SiO2 multilayer coatings with designed anisotropic thermal conductivity – From theoretical conceptualization to experimental validation

    Tkadletz, M., Lechner, A., Schalk, N., Sartory, B., Winkler, M. & Mitterer, C., 2020, In: Surface & coatings technology. 2020, 393, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., 2020, In: Surface & coatings technology. 2020, 392, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Thermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J. & Czettl, C., 2020, In: Surface & coatings technology. 2020, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2019
  25. E-pub ahead of print

    Impact of V , Hf and Si on oxidation processes in Ti – Al – N : Insights from ab initio molecular dynamics

    Guo, F., Holec, D., Wang, J. & Du, Y., 5 Nov 2019, (E-pub ahead of print) In: Surface & coatings technology. 381.2020, January, 125125.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Correlating high temperature mechanical and tribological properties of CrAlN and CrAlSiN hard coatings

    Drnovšek, A., Vo, H., Xia, A., Vachhani, S. J., Kolozsvári, S., Hosemann, P., Franz, R. & Rebelo de Figueiredo, M., 17 May 2019, In: Surface & coatings technology. 372.2019, August, p. 361-368 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K. & Antretter, T., 2019, In: Surface & coatings technology. 380, p. 125026-1-11

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The sputter performance of an industrial-scale planar Mo-target over ist lifetime: target erosion and film properties

    Rausch, M., Sabag, A., Pichler, K.-H., Gruber, G., Köstenbauer, J., Köstenbauer, H., Kreiml, P., Cordill, M. J., Winkler, J. & Mitterer, C., 2019, In: Surface & coatings technology. 2020, 381, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2018
  34. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, In: Surface & coatings technology. p. 190-197

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Linking erosion and sputter performance of a rotatable Mo target to microstructure and properties of the deposited thin films

    Hofer-Roblyek, A. M., Pichler, K.-H., Linke, C., Franz, R., Winkler, J. & Mitterer, C., 2018, In: Surface & coatings technology. p. 354-359

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion

    Lassnig, A., Nakamura, N., Jörg, T., Reeja-Jayan, B. & Cordill, M., 2018, In: Surface & coatings technology. 349, p. 963-968

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Needle grass array of nanostructured nickel cobalt sulfide electrode for clean energy generation

    Zequine, C., Bhoyate, S., Siam, K., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S., Baker, M., Constantinides, G., Rebholz, C., Gupta, G., Li, X. & Gupta, R. K., 2018, In: Surface & coatings technology. p. 306-312

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Theory-guided metal-decoration of nanoporous carbon for hydrogen storage applications

    Holec, D., Kostoglou, N., Tampaxis, C., Babic, B., Mitterer, C. & Rebholz, C., 2018, In: Surface & coatings technology. p. 42-49

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2017
  42. E-pub ahead of print

    Interface-induced electronic structure toughening of nitride superlatices

    Rehák, P., Cerny, M. & Holec, D., 25 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 325.2017, September, p. 410-416 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

    Kleinbichler, A., Todt, J., Zechner, J., Wöhlert, S., Cordill, M. & Többens, D., 2017, In: Surface & coatings technology. 332, p. 376-381

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 2017, In: Surface & coatings technology. 332, p. 368-375

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A., Mitterer, S. & Mitterer, C., 2017, In: Surface & coatings technology. 332, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings

    Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309, p. 436-444 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings

    Xu, Y. X., Riedl, H., Holec, D., Chen, L., Du, Y. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 324, p. 48-56

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Vacancy-driven extended stability of cubic metastable Ta-Al-N and Nb-Al-N phases

    Pacher, F., Mayrhofer, P. H. & Holec, D., 2017, In: Surface & coatings technology. 326, p. 37-44

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2016
  52. Published

    Correlative microstructure and topography informed nanoindentation of copper films

    Bigl, S., Schöberl, T., Wurster, S., Cordill, M. J. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308, p. 404-413 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

    Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 25 May 2016, In: Surface & coatings technology. 294, p. 186-193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2015
  59. Published

    Restrictions of stress measurements using the curvature method by thermally induced plastic deformation of silicon substrates

    Saringer, C., Tkadletz, M. & Mitterer, C., 25 Jul 2015, In: Surface & coatings technology. 274, p. 68-75 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Element- and charge-state-resolved ion energies in the cathodic arc plasma from composite AlCr cathodes in argon, nitrogen and oxygen atmospheres

    Franz, R., Polcik, P. & Anders, A., 2015, In: Surface & coatings technology. 272, p. 309-321

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings

    Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2015, In: Surface & coatings technology. 282, p. 43-51

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Residual stress gradients in α-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134 - 140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2014
  65. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Crossover of texture and morphylogy in (Ti1-xAlx)1 - yYyN alloy films and the pathway of structure evolution

    Szekely, L., Safran, G., Kis, V., Horvat, Z. E., Mayrhofer, P. H., Moser, M., Radnoczi, G., Misjak, F. & Barna, P. B., 2014, In: Surface & coatings technology. 257, p. 3-14

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Increased thermal stability of Ti1-xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels

    Weirather, T., Chladil, K., Sartory, B., Caliskanoglu, D., Cremer, R., Kölker, W. & Mitterer, C., 2014, In: Surface & coatings technology. 257, p. 48-57

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

    Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing

    Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior

    Tkadletz, M., Mitterer, C., Sartory, B., Letovsky-Papst, I., Czettl, C. & Michotte, C., 2014, In: Surface & coatings technology. 257, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2013
  76. Published

    C2H6 as precursor for low pressure chemical vapor deposition of TiCNB hard coatings

    Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2013, In: Surface & coatings technology. 215, p. 127-132

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Industrial-scale sputter deposition of Cr1-xAlxN coatings with 0.21<x <0.74 from segmented targets

    Weirather, T., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013, In: Surface & coatings technology. 232, p. 303-310

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings

    Mühlbacher, M., Franz, R., Paulitsch, J., Rudigier, H., Polcik, P., Mayrhofer, P. H. & Mitterer, C., 2013, In: Surface & coatings technology. 215, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings

    Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    V-alloyed ZrO2 coatings with temperature homogenization function for high-temperature sliding contacts

    Jantschner, O., Walter, C., Muratore, C., Voevodin, A. A. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 76-83

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review

    Franz, R. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  82. 2012
  83. Published

    Carbon doped alpha-Al2O3 coatings grown by chemical vapor deposition

    Hochauer, D., Mitterer, C., Penoy, M., Puchner, S., Michotte, C., Martinz, H. P., Hutter, H. & Kathrein, M., 2012, In: Surface & coatings technology. 206, p. 4771-4777

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material

    Weirather, T., Fian, A., Sartory, B., Caliskanoglu, D., Kölker, W. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 3601-3606

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Oxidation behaviour and tribological properties of arc-evaporated ZrAlN hard coatings

    Franz, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 2337-2345

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Thermal stability and oxidation resistance of Ti-Al-N coatings

    Chen, L., Paulitsch, J., Du, Y. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2954-2960

    Research output: Contribution to journal › Article › Research › peer-review

  93. 2011
  94. Published

    A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets

    Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications

    Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings

    Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools

    Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Microstructure-property relations of reactively magnetron sputtered VCxNy films

    Mitterer, C., Fateh, N. & Munnik, F., 2011, In: Surface & coatings technology. p. 3805-3809

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Phase stability and alloy-related trends in Ti-Al-N, Zr-Al-N and Hf-Al-N systems from first principles

    Holec, D., Rachbauer, R., Chen, L., Wang, L., Luef, D. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 206, p. 1698-1704

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The effect of film thickness variations in peridic cracking: Analysis and experiments

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2010
  103. Published

    Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films

    Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Structure, mechanical properties and oxidation behaviour of arc-evaporated NbAlN hard coatings

    Franz, R., Lechthaler, M., Polzer, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 2447-2453

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Structure-property relations in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Franz, R., Escobar Galindo, R., Palacio, C., Espinosa, A., Calderon, S., Mitterer, C. & Carvalho, S., 2010, In: Surface & coatings technology. 205, p. 2134-2141

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Thermal stability of sputtered Al2O3 coatings

    Edlmayr, V., Moser, M., Walter, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 1576-1581

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Thernal stability of doped CVD K-Al2O3 coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H.-P. & Kathrein, M., 2010, In: Surface & coatings technology. 204, p. 3713-3722

    Research output: Contribution to journal › Article › Research › peer-review

  109. 2009
  110. Published

    3D versus 2D finite element simulation of the effect of surface roughness on nanoindentation of hard coatings

    Walter, C. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 3286-3290

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Improved oxidation resistance of TiAlN coatings by doping with Si or B

    Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

    Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Interface fracture properties of thin films studied by using the micro-cantilever deflection technique

    Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations