Nina Schalk

Veröffentlichungen / Abschlussarbeiten

  1. 2021
  2. Veröffentlicht

    Microstructure and Mechanical Properties of ZrN, ZrCN and ZrC Coatings Grown by Chemical Vapor Deposition

    Frank, F., Tkadletz, M., Czettl, C. & Schalk, N., 22 Apr. 2021, in: Coatings. 11.2021, 5, S. 1-13 491.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  3. Veröffentlicht

    In-Situ Investigation of the Oxidation Behaviour of Chemical Vapour Deposited Zr(C,N) Hard Coatings Using Synchrotron X-ray Diffraction

    Frank, F., Tkadletz, M., Saringer, C., Stark, A., Schell, N., Deluca, M., Czettl, C. & Schalk, N., 24 Feb. 2021, in: Coatings. 11.2021, 3, S. 264 16 S., 11030264.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  4. Veröffentlicht

    Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Kainz, C., Czettl, C. & Schalk, N., 11 Feb. 2021, in: Surface & coatings technology. 410.2021, 25 March, S. 1-7 7 S., 126959.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  5. Veröffentlicht

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 2021, in: Surface & coatings technology. 2021, 418, S. 1-7

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  6. Veröffentlicht

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 2021, in: Surface & coatings technology. 2021, 406

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  7. Veröffentlicht

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 2021, in: Surface & coatings technology. 2021, 417, S. 1-8

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  8. Veröffentlicht

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 2021, in: Surface & coatings technology. 2021, 406, S. 1-6

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  9. Veröffentlicht

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 2021, in: Surface & coatings technology. 2021, 421, S. 1-8

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  10. 2020
  11. Veröffentlicht
  12. Veröffentlicht

    Tailoring hardness and fracture toughness of TiN-based CVD coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 8 Juli 2020.

    Publikationen: KonferenzbeitragPosterForschung

  13. Veröffentlicht
  14. Veröffentlicht

    Influence of spinodal decomposition and fcc →w phase transformation on global and local mechanical properties of nanolamellar CVD fcc-Ti1-xAlxN coatings

    Tkadletz, M., Lechner, A., Schalk, N., Sartory, B., Stark, A., Schell, N., Saringer, C., Mitterer, C. & Czettl, C., 12 Mai 2020, in: Materialia. 11.2020, June, 8 S., 100696.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  15. Veröffentlicht

    Microstructure, mechanical and thermo-physical properties of CVD TiCxN1-x coatings on cemented carbide substrates grown with C2H6 as C feeding precursor

    Kainz, C., Schalk, N., Tkadletz, M., Winkler, M. & Czettl, C., 2020, in: Surface & coatings technology. 2020, 394, S. 1-7

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  16. Veröffentlicht

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 2020, in: Surface & coatings technology. 2020, 404, S. 1-9

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  17. Veröffentlicht
  18. Veröffentlicht

    Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Stark, A., Schell, N., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., 2020, in: International journal of refractory metals & hard materials.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  19. Veröffentlicht

    Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., 2020, in: Surface & coatings technology. 2020, 392, S. 1-11

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  20. Veröffentlicht

    Thermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J. & Czettl, C., 2020, in: Surface & coatings technology. 2020, S. 1-9

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  21. 2019
  22. Veröffentlicht

    The effect of B and C addition on microstructure and mechanical properties of TiN hard coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 31 Okt. 2019, in: Thin solid films. 688.2019, 137283, 8 S., 137283.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  23. Veröffentlicht

    Thermal expansion of magnetron sputtered TiCxN1-x coatings studied by high-temperature X-ray diffraction

    Saringer, C., Kickinger, C., Munnik, F., Mitterer, C., Schalk, N. & Tkadletz, M., 31 Okt. 2019, in: Thin solid films. 688, 137307.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  24. Veröffentlicht

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Juli 2019, in: Surface & coatings technology. 370.2019, July, S. 311-319 9 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  25. Veröffentlicht

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 Mai 2019, in: Surface & coatings technology. 374.2019, 25 September, S. 617-624 8 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  26. Veröffentlicht

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb. 2019, in: Surface & coatings technology. 359.2019, February, S. 314-322 9 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  27. Veröffentlicht

    Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb. 2019, in: International journal of refractory metals & hard materials. 81.2019, June, S. 1-6 6 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  28. Veröffentlicht

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, in: Acta Materialia. 174.2019, August, S. 195-205 11 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  29. 2018
  30. Elektronische Veröffentlichung vor Drucklegung.

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dez. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Surface & coatings technology. 315.2019, February, S. 155-161 7 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  31. Veröffentlicht
  32. Veröffentlicht

    Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si (001) wafers and Cu overlayers

    Mühlbacher, M., Greczynski, G., Sartory, B., Schalk, N., Lu, J., Petrov, I., Greene, J. E., Hultman, L. & Mitterer, C., 2018, in: Scientific reports (London : Nature Publishing Group). S. 1-9

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  33. Veröffentlicht

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, in: Surface & coatings technology. S. 190-197

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  34. Veröffentlicht

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2018, in: Wear. 398-399.2018, March, S. 90-98

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  35. Veröffentlicht
  36. Veröffentlicht

    Microstructure, mechanical properties and cutting performance of Cr1-yTayN single layer and Ti1-xAlxN/Cr1-yTayN multilayer coatings

    Schalk, N., Pohler, M., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2018, in: International journal of refractory metals & hard materials. S. 211-216

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  37. 2017
  38. Veröffentlicht
  39. Veröffentlicht

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. S. 88/1-88/9

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  40. Veröffentlicht

    Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

    Gassner, M., Schalk, N., Sartory, B., Pohler, M., Czettl, C. & Mitterer, C., 2017, in: International journal of refractory metals & hard materials. 69, S. 234-239

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  41. Veröffentlicht
  42. Veröffentlicht

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. S. 92/1-92/11

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  43. Veröffentlicht
  44. Veröffentlicht

    Influence of the Ta content on microstructure, properties and thermal stabiltiy of arc evaporated Ti1-x-yAlxTayN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017, 19th Plansee Seminar. S. 96/1-96/12

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  45. Veröffentlicht

    Microstructure, mechanical properties and application behavior of Cr1-xTaxN hard coatings

    Pohler, M., Schalk, N., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2017, 19th Plansee Seminar. S. 53/1-53/9

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  46. Veröffentlicht

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, in: Surface & coatings technology. 309, S. 687-693 7 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  47. Veröffentlicht

    Straightforward measurement of thermal conductivity of hard coatings with the TDTR method

    Winkler, M., Tkadletz, M., Schalk, N., Mitterer, C., Bartholomé, K., Pohler, M. & Czettl, C., 2017.

    Publikationen: KonferenzbeitragPosterForschung

  48. Veröffentlicht

    Tailoring age hardening of Ti1-xAlxN by Ta alloying

    Großmann, B., Jamnig, A., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, in: Journal of vacuum science & technology / A (JVST). 35, 6, S. 060604-1-060604-6

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  49. 2016
  50. Veröffentlicht
  51. Veröffentlicht

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb. 2016, in: Journal of Vacuum Science and Technology B, JVSTB. 34, 2, S. 1-8 8 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  52. Veröffentlicht

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, in: Surface & coatings technology. 285, S. 31-46 16 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  53. Veröffentlicht

    Combinatorial synthesis of Cr1−xAlxN and Ta1−xAlxN coatings using industrial scale co-sputtering

    Schalk, N., Weirather, T., Sabitzer, C., Hirn, S., Terziyska, V., Gangopadhyay, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2016, in: Surface engineering. 32, 4, S. 252-257 6 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  54. Veröffentlicht

    Diffusion Studies in the TiN/Cu Bilayer System and Beyond

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Greczynski, G., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2016.

    Publikationen: KonferenzbeitragVortragForschung(peer-reviewed)

  55. Veröffentlicht

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, in: Surface & coatings technology. 299, S. 49-55 7 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  56. Veröffentlicht

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, in: Surface & coatings technology. 304, S. 134-141 8 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vorherige 1 2 Nächste