Peter Hans Supancic

1 - 165 out of 165Page size: 500

Publications / Theses

  1. 2021
  2. Published

    Local-probe based electrical characterization of a multiphase intermetallic γ-TiAl based alloy

    Kratzer, M., Huszar, M., Tengg, L., Billovits, T., Kaufmann, B., Supancic, P., Clemens, H., Mayer, S. & Teichert, C., 28 May 2021, In: Journal of applied physics. 129, 20, 205107.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Measurement of the piezotronic effect on single grain boundaries in zinc oxide Varistors

    Billovits, T., Kaufmann, B. & Supancic, P., 26 May 2021, In: Open ceramics. 6, 100125.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A modelling approach to describe the DC current-voltage behaviour of low-voltage zinc oxide varistors

    Kaufmann, B., Billovits, T., Kratzer, M., Teichert, C. & Supancic, P., 29 Apr 2021, In: Open ceramics. 6.2021, June, 11 p., 100113.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., 17 Apr 2021, In: Open ceramics. 6.2021, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Observation of an electrical breakdown at ZnO Schottky contacts in varistors

    Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2020
  9. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Investigation of schottky barriers at Pd-ZnO junctions in varistors

    Kaufmann, B., Raidl, N. & Supancic, P. H., 2020, In: Journal of the European Ceramic Society. 40, 11, p. 3771-3775

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2019
  12. Published

    Modelling of the highly non-linear electrical behavior of ZnO varistor ceramics

    Kaufmann, B. & Supancic, P. H., 6 May 2019.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2018
  16. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Current dominating paths through ZnO varistor ceramics

    Kaufmann, B., Hofstätter, M., Raidl, N. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  23. Published

    Failure of Varistor Ceramics

    Danzer, R. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  24. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2017
  26. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of Surface Damage and Residual Stress on Strength of WC-Co Hard Metals under Biaxial Loading Conditions

    Harrer, W. S., Klünsner, T., Supancic, P. H., Jonke, M., Glätzle, J. & Barbist, R., 29 May 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

    Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influence of ferroelectric domain texture on the performance of multilayer piezoelectric actuators

    Kaufmann, P., Röhrig, S., Supancic, P. & Deluca, M., 2017, In: Journal of the European Ceramic Society. 37, p. 2039-2046 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of surface damage and residual stress on strength of WC-Co hard metals under biaxial loading conditions

    Harrer, W., Klünsner, T., Jonke, M., Supancic, P., Glätzle, J. & Barbist, R., 2017

    Research output: Non-textual form › Web publication/site › Research

  31. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. H. & Danzer, R., 2017, Praktische Metallographie Sonderband. Vol. 51. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors

    Raidl, N., Hofstätter, M. & Supancic, P. H., 2017, In: Advanced Engineering Materials. 19, 4

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2016
  37. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2015
  41. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  42. Published

    Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N. & Supancic, P., 25 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  44. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  45. Published

    Impact of the Piezotronic Effect on Metal-Oxide Varistor Properties

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Lock-In Infrared Microscopy on ZnO Ceramics - A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

    Hofstätter, M., Raidl, N., Sartory, B. & Supancic, P., 2015, In: Microscopy and microanalysis. 21, p. 1145-1152 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Modelling The Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

    Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Varistor piezotronics: Mechanically tuned conductivity in varistors

    Baraki, R., Novak, N., Hofstätter, M., Supancic, P., Rödel, J. & Frömling, T., 2015, In: Journal of applied physics. 118, 8, p. 085703 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2014
  54. Published

    Piezotronic Modification of Double-Schottky-Barriers in ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N., Nevosad, A., Teichert, C. & Supancic, P., 16 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  55. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Current-voltage characteristics of zinc oxide varistors with respect to mechanical load

    Raidl, N., Hofstätter, M. & Supancic, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  59. Published

    Load Characteristics of Lead-Free Ceramic Multilayer Actuators Based on Bismuth–Sodium–Titanate

    Reichmann, K., Schütz, D., Deluca, M. & Supancic, P., 2014, In: International journal of applied ceramic technology. 11, p. 431-435

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Microanalysis on Functional Ceramics: Complementary Investigation Techniques on ZnO-based Varistor Ceramics

    Supancic, P., Raidl, N. & Hofstätter, M., 2014, Proc. of 11th EMAS Regional Workshop on Electron Probe Microanalysis of Materials Today. p. 313-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    On Bürmann's theorem and its application to problems of linear and nonlinear heat transfer and diffusion - Expanding functions in powers of their derivative

    Schöpf, H. & Supancic, P., 2014, In: The mathematica journal. 16, p. 1-44

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Precise determination of phonon constants in lead-free monoclinic (K 0.5Na0.5)NbO3 single crystals

    Rafiq, M. A., Supancic, P., Costa, E. E., Vilarinho, P. M. & Deluca, M., 2014, In: Applied physics letters. 104, p. 011902-011902

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2013
  68. Published

    3D Netzwerksimulationen von Varistoren mit verschiedenen Korngrößenverteilungen

    Hofstätter, M. & Supancic, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 206-2010

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    C-AFM and KPFM approach to inverstigate the electrical properties of single grain boundaries in ZnO varistor devices

    Nevosad, A., Hofstätter, M., Wiessner, M., Supancic, P. & Teichert, C., 2013, Proc. of SPIE, Oxide-based Materials and Devices IV. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Effect of the electric conductivity on the modeling of the poling process of ferroelectric components

    Schwaab, H., Deluca, M., Supancic, P. & Kamlah, M., 2013, In: Journal of the mechanics and physics of solids. 61, p. 504-516

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  74. 2012
  75. Published

    Effect of combined thermo-mechanical loading on the domain texture and the fracture resistance of lead zirconate titanate (PZT) ceramics

    Deluca, M., Krautgasser, C., Bermejo Moratinos, R., Foronda, H., Jones, J. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions

    Supancic, P. & Schöpf, H. M., 2012, In: Journal of the European Ceramic Society. 32, p. 4031-4040

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Macroscopical non-linear material model for ferroelectric materials inside a hybrid finite element formulation

    Schwaab, H., Grünbichler, H., Supancic, P. & Kamlah, M., 2012, In: International journal of solids and structures. 49, p. 457-469

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Microscopical investigation of grain boundaries in ZnO varistor ceramics

    Nevosad, A., Hofstätter, M., Supancic, P. & Teichert, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    New Self-regulating Ceramic PTC Thermistor Heating Elements with Strongly Improved Performance

    Röhrig, S. & Supancic, P., 2012, In: Ceramic forum international (CFI). 89, p. E25-E29

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Polarity-dependent electrical characteristics of ZnO varistor ceramics

    Hofstätter, M., Nevosad, A., Auer, C., Piber, M. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  87. 2011
  88. Published

    AFM Based Investigations of ZnO Varistor Ceramics

    Pavitschitz, A., Hofstätter, M., Supancic, P., Athenstaedt, W., Auer, C. & Teichert, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, In: Key engineering materials. 465, p. 41-46

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Krautgasser, C. & Supancic, P., 2011, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. p. 243-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  99. 2010
  100. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  101. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    COMPARISON OF BENDING STRENGTH OF WC-CO HARD METAL IN MILLIMETER AND MICROMETER SIZED SPECIMENS

    Pippan, R., Klünsner, T., Wurster, S., Jenko, M., Ebner, R., Supancic, P., Glätzle, J. & Püschel, A., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Electrical characterization of ZnO multilayer varistors on the nanometre scale with conductive atomic force microscopy

    Schloffer, M., Teichert, C., Supancic, P., Andreev, A., Hou, Y. & Wang, Z., 2010, In: Journal of the European Ceramic Society. 30, p. 1761-1764

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  105. Published

    Fracture Statistics for Small Specimens

    Danzer, R. & Supancic, P., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 3-11

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  106. Published

    Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loading

    Bermejo Moratinos, R., Lucie, S., Kraleva, I., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Mechanical behaviour of Low Temperature Cofired Ceramics (LTCCs) under biaxial loading

    Bermejo Moratinos, R., Aldrian, F., Supancic, P. & Morrell, R., 2010, Proceedings of the XI International Conference of the European Ceramic Society. p. 277-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Meso-Scale Mechanical Testing Methods for Diamond Composite Materials

    Morrell, R., Danzer, R., Supancic, P., Harrer, W., Puchegger, S. & Peterlik, H., 2010, In: International journal of refractory metals & hard materials. 28, p. 508-515

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2010, In: Journal of the European Ceramic Society. 30, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Strength and fracture analysis of silicon chips to be embedded into printed circuit boards

    Deluca, M., Bermejo, R., Pletz, M. & Supancic, P., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    The Notched Ball Test - A New Strength Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Witschnig, S. & Schöppl, O., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 327-335

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  113. 2009
  114. Published

    Mechanical behaviour of low temperature co-fired ceramics under biaxial loading: Influence of internal architecture on the fracture response

    Bermejo, R., Kraleva, I., Aldrian, F., Supancic, P. & Morrell, R., 1 Dec 2009, 11th International Conference and Exhibition of the European Ceramic Society 2009. Vol. 1. p. 276-280 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    A New test to Determine the Tensile Strength of Brittle Balls-The Notched Ball Test

    Danzer, R., Supancic, P., Witschnig, S., Polaczek, E. & Morrell, R., 2009, In: Journal of the European Ceramic Society. p. 2447-2459

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Der 4-Kugelversuch zur Ermittlung der biaxialen Biegefestigkeit spröder Werkstoffe

    Danzer, R., Supancic, P. & Harrer, W., 2009, Technische keramische Werkstoffe. p. 1-48

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  117. Published

    Fracture response of low temperature cofired ceramics

    Bermejo Moratinos, R., kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  118. Published

    Fracture statistics of small specimens

    Supancic, P. & Danzer, R., 2009

    Research output: Book/Report › Commissioned report › Research

  119. Published

    Influence of Internal Architectures on the Fracture Response of LTCC Components

    Bermejo Moratinos, R., Kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2009, In: Key engineering materials. 409, p. 275-278

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Influence of the Sample Size on the Results of B3B-Tests

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2009, In: Key engineering materials. 409, p. 176-184

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Material characterisation of ferroics, piezoelectrics: Material properties for a constitutive law

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Athenstaedt, W., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2009, Proceedings of Electroceramics XI: Piezoelectrics, 31.8 - 4.9.2008, Man UK. Freer, R. & Leach, C. (eds.). p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Strength Tests on Silicon Nitride Balls

    Supancic, P., Danzer, R., Harrer, W., Wang, Z., Witschnig, S. & Schöppl, O., 2009, In: Key engineering materials. 413, p. 193-200

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    The Notched Ball Test - A new strenght Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Schöppl, O. & Witschnig, S., 2009

    Research output: Book/Report › Commissioned report › Research

  125. 2008
  126. Published

    Ber-03-2008-Epcos

    Kraleva, I., Kreith, J., Supancic, P. & Danzer, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  127. Published

    Ber-10-2008-Bosch

    Supancic, P., Danzer, R., Harrer, W., Kreith, J. & Witschnig, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. Published

    Ber-23-2008-Epcos

    Supancic, P., Polaczek, E., Kreith, J., Danzer, R. & Sharova, E., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  129. Published

    Biaxial Strength Testing of a Silicon Nitride Ceramic for Bearing Rolling Elements

    Danzer, R., Harrer, W., Supancic, P., Schöppl, O. & Vieillard, C., 2008

    Research output: Book/Report › Commissioned report › Research

  130. Published

    Biaxial Strength Testing of a Silicon Nitride Ceramic for Bearing Rolling Elements

    Danzer, R., Harrer, W., Supancic, P., Schöppl, O. & Viellard, C., 2008

    Research output: Book/Report › Commissioned report › Research

  131. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugel-Versuch

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  132. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R. J., 2008, In: Advanced Engineering Materials. 10, p. 275-298

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Influence of Contact Stress on the Determination of Strength in the Ball-on-Three-Balls Test

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 18-32

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Influence of internal architectures on the fracture response of LTCC components

    Bermejo Moratinos, R., kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  135. Published

    Investigation of the behavior of multilayer piezoelectric actuators: Modeling and Experiments.

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008, Proceedings of SMASIS08. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  137. Published

    Modelling of the ferroic behaviour of a soft PZT-ceramic - Material properties for a constitutive law

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R. & Supancic, P., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Monte Carlo simulation of Weibull distribution of ceramic strength values

    Ambrožič, M., Bermejo Moratinos, R., Supancic, P. & Kosmač, T., 2008, Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics. p. 19-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Strength of Small Ceramic Specimens - A Limit to Weibull Statistics

    Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1266-1270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    The Ball on Three Balls Test: Strength Testing of Specimens of Different Sizes and Geometries

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1271-1275

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. 2007
  142. Published

    B-MCL 2007-28

    Harrer, W., Bermejo Moratinos, R., Supancic, P., Kreith, J., Wang, Z. & Danzer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  143. Published

    Der 4-Kugel-Versuch: Prüfung der Festigkeit scheiben- und plattenförmiger Bauteile

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  144. Published

    Druckversuch zur Charakterisierung von Piezokeramiken

    Grünbichler, H., Kreith, J., Maier, G., Bermejo Moratinos, R., Paul, S., Supancic, P. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  145. Published

    Fractography of Thermistors

    Danzer, R., Platzer, A., Supancic, P. & Wang, Z., 2007, Fractography of Glasses and Ceramics V. p. 231-242

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  146. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2007, In: Key engineering materials. 333, p. 251-254

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Influence of Contact Damage on Strength and Fractography of Ball on Three Balls Test Specimens

    Danzer, R., Harrer, W., Lube, T. & Supancic, P., 2007, Fractography of Glasses and Ceramics V. p. 203-214

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  149. Published

    Leitfähigkeit von ZnO Schichten

    Schloffer, M., Supancic, P. & Teichert, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  150. Published

    Mechanisches Versagen von Keramiken verursacht durch elektrischen Strom

    Danzer, R. & Supancic, P., 2007, Mechanisches Versagen von Keramiken verursacht durch elektrischen Strom. p. 175-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. Published

    Použití centrálně zatězované desky na třech podporách k určení pevnosti křehkých materiálů

    Chlup, Z., Kozák, V. & Supancic, P., 2007, Křehký lom 2007 - Porušování a design materiálů. p. 196-208

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  152. Published

    Schadensanalyse an elektrokeramischen Bauteilen

    Supancic, P., Platzer, A., Wang, Z., Harrer, W. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. Published

    Schadensanalyse an elektronischen Bauteilen

    Supancic, P., Platzer, A., Wang, Z., Harrer, W. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  154. Published

    The Ball on three Balls Test - Strength and Failure Analysis of Different Materials

    Danzer, R., Harrer, W., Supancic, P., Lube, T., Wang, Z. & Boerger, A., 2007, In: Journal of the European Ceramic Society. 27, p. 1481-1485

    Research output: Contribution to journal › Article › Research › peer-review

  155. 2006
  156. Published

    Biaxial Strength Testing on Mini Specimens

    Danzer, R., Supancic, P., Harrer, W., Lube, T. & Börger, A., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 589-590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Biaxial Tensile Strength Test for Brittle Rectangular Plates

    Danzer, R., Supancic, P. & Harrer, W., 2006, In: Journal of the Ceramic Society of Japan. 114, p. 1054-1060

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    B-MCL 2006-65

    Danzer, R., Supancic, P., Grünbichler, H., Bermejo Moratinos, R., Kreith, J. & Binder, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  159. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugelversuch

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 487-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Schadensanalysen an nichtlinearen elektrischen Bauteilen

    Platzer, A., Supancic, P., Wang, Z. & Danzer, R., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 323-330

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Temperaturentwicklung in keramischen PTC-Bauteilen

    Platzer, A., Supancic, P. & Danzer, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  162. Published

    Thermal Shock Features of Alumina-Zirconia Layered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  163. Published

    Thermographie an Varistoren

    Supancic, P., 2006, WerWasWo Forschung MUL. p. 115-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Thermography and Simulation of Advanced Nonlinear Electroceramic Components

    Platzer, A., Supancic, P. & Danzer, R., 2006, In: Advanced Engineering Materials. 8, p. 1150-1155

    Research output: Contribution to journal › Article › Research › peer-review

  165. 2005
  166. Published

    Biaxial strength test of discs of different size using the ball on three balls test

    Börger, A., Danzer, R. & Supancic, P., 2005, 28th International Conference on Advanced Ceramics and Composites B. Lara-Curzio, E. & Readey, M. J. (eds.). p. 283 288 p. (Ceramic Engineering and Science Proceedings; vol. 25, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Bruch von Elektrokeramiken

    Danzer, R. & Supancic, P., 2005, In: Werkstoffler : Zeitung des Vereins Leobner Werkstoffwissenschafter. p. 15-19

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Fracture of Electroceramic Components

    Supancic, P. & Danzer, R., 2005, Proceedings of 11th International Conference on Fracture. Eigenverlag, p. 5687-5692

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Fracture Statistics of Ceramics - A Short Overview

    Danzer, R., Lube, T. & Supancic, P., 2005, Proceeding of 11th International Conference on Fracture. Eigenverlag, p. 3676-3681

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    KH-Qualität durch optimale Pressfasen bei PTC`s

    Supancic, P. & Platzer, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  171. Published

    Qualität durch fehlerfreie Keramik

    Supancic, P. & Platzer, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  172. Published

    Qualität durch optimierte Gefüge bei PTC`s

    Supancic, P. & Platzer, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  173. Published

    Strength and Fractography of High Power Varistors

    Supancic, P., Wang, Z., Aldrian, F., Schriener, A. & Danzer, R., 2005, In: Key engineering materials. p. 358-365

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Strength and Fractography of Piezoceramic Multilayer Stacks

    Supancic, P., Wang, Z., Harrer, W. & Danzer, R., 2005, In: Key engineering materials. 290, p. 46-53

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Thermal Shock Bavior of an Al2O3/ZrO2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

    Bermejo, R., Lanes, L., Anglada, M., Supancic, P. & Lube, T., 2005, In: Key engineering materials. 290, p. 191-198

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Thermography and Simulation as a Combined Method for Failure Analysis of PTCs

    Supancic, P., Platzer, A. & Danzer, R., 2005, In: Key engineering materials. 290, p. 54-61

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Three-Dimensional Finite-Element Analysis of High-Speed (Millisecond) Measurements

    Supancic, P. & Kaschnitz, E., 2005, In: International journal of thermophysics. 26, p. 957-967

    Research output: Contribution to journal › Article › Research › peer-review

  178. 2004
  179. Published

    Bulk and grain boundary resistivities of donor-doped barium titanate ceramics

    Preis, W., Bürgermeister, A., Sitte, W. & Supancic, P., 2004, In: Solid State Ionics. 173, p. 69-75

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Thermal Shock Resistance of NEXTEL TM 610 and NEXTELTM 720 Continuous Fiber-Reinforced Mullite Matrix Composites

    Simon, R. & Supancic, P., 2004, Ceramic Engineering and Science Proceedings. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. 2003
  182. Published

    Failure statistics beyond the Weibull behavior

    Danzer, R., Supancic, P. & Lube, T., 8 Dec 2003, In: Ceramic Engineering and Science Proceedings. 24, 4, p. 497-502 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Mechanische Zuverlässigkeit von Elektrokeramiken

    Supancic, P. H., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  184. 2001
  185. Published

    Monte Carlo simulations of strength distributions of brittle materials - Type of distribution, specimen and sample size

    Danzer, R., Lube, T. & Supancic, P., 1 Jul 2001, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 92, 7, p. 773-783 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Contact

Phone: 4109

Latest Research Output

View more (165)