Montanuniversität

Organisational unit: University

601 - 650 out of 30,152Page size: 50

Publications / Theses

  1. 2021
  2. Published

    Emulsion Charakterisierung in porösen Medien

    Brandstätter, B., 2021

    Research output: Thesis › Master's Thesis

  3. Published

    Energiebetrachtung einer pharmazeutischen Produktionsanlage

    Prantl, M., 2021

    Research output: Thesis › Master's Thesis

  4. Published

    Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation

    Holzapfel, D. M., Music, D., Hans, M., Wolff-Goodrich, S., Holec, D., Bogdanovski, D., Arndt, M., Eriksson, A. O., Yalamanchili, K., Primetzhofer, D., Liebscher, C. & Schneider, J. M., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Entwicklung einer automatisierten Probenentnahme für Sinter

    Scherz, S., 2021

    Research output: Thesis › Master's Thesis

  6. Published

    Entwicklung einer effizienten Simulationsmethode für einen Gewindewalzprozess

    Weindl, C., 2021

    Research output: Thesis › Master's Thesis

  7. Published

    Entwicklung einer maßgeschneiderten Wärmebehandlungsroute für SLM gefertigte γ-TiAl-Hochtemperaturkomponenten

    Pürstl, F., 2021

    Research output: Thesis › Master's Thesis

  8. Published

    Entwicklung einer Reifegradsystematik für den Einkauf am Beispiel der voestalpine

    Pozdena, C. S. L., 2021

    Research output: Thesis › Master's Thesis

  9. Published

    Entwicklung eines Prüfkonzeptes für die hochfrequente Ermüdungsprüfung von kleinen, bauteilähnlichen Proben

    Klösch, R., 2021

    Research output: Thesis › Master's Thesis

  10. Published

    Entwicklung von Brandversuchen im Technikums-Maßstab zur Beurteilung der Effizienz von Löschmittelzusätzen

    Holubar, S., 2021

    Research output: Thesis › Master's Thesis

  11. Published

    Epigenetic-Hydrothermal Fluorite Veins in a Phosphorite Deposit from Balaton Highland (Pannonian Basin, Hungary): Signatures of a Regional Fluid Flow System in an Alpine Triassic Platform

    Molnar, Z., Kiss, G., Molnar, F., Vaczi, T., Czuppon, G., Dunkl, I., Zaccarini, F. & Dodony, I., 2021, In: Minerals. 11, 6, 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    ERLY CRETACEOUS PLUME-RIDGE INTERACTION IN THE BAND-E-ZEYARAT OPHIOLITE (NORTH MAKRAN, IRAN): NEW CONSTRAINTS FROM PETROLOGICAL, MINERAL CHEMISTRY AND GEOCHRONOLOGICAL DATA

    Barbero, E., Delavari, M., Dolati, A., Vahedi, L., Langone, A., Marroni, M., Pandolfi, L., Zaccarini, F. & Saccani, E., 2021, Ofioliti, GLOM 2021 Virtual Winter Meeting. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Erratum: Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers

    Sun, Y. W., Holec, D., Gehringer, D., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 2021, In: Physical review : B, Condensed matter and materials physics. 2021, 103, p. 119901-1 - 119901-3

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Errichtung eines Eisenbahntunnels in Deckelbauweise über dem Hauptsammler West der Stadt Stuttgart

    Granitzer, A., Tschuchnigg, F., Summerer, W., Galler, R. & Stoxreiter, T., 2021, In: Bauingenieur. 2021, 5, p. 156-164 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Erstellung eines Lastprofilgenerators für die Eisen- und Stahlbranche mittels ereignisorientierter Simulation

    Staubmann, T., 2021

    Research output: Thesis › Master's Thesis

  16. Published

    Erstellung eines Vorgehensmodells für die Akquise von Prozessdaten als Basis für die Anwendung von Predictive Maintenance

    Niederl, P., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    Erweichung von Kunststoffformenstählen beim Spritzgießen

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  18. Published

    Erzpetrographische und geochemische Analyse der polymetallischen Kupferlagerstätte Walchen bei Öblarn, Steiermark

    Brandner, P., 2021

    Research output: Thesis › Master's Thesis

  19. Published

    Estimating in Situ Rock Mass Strength and Elastic Modulus of a Geothermal Reservoir

    Villeneuve, M., Heap, M. J., Kushnir, A. R. L. & Baud, P., 2021.

    Research output: Contribution to conference › Paper › peer-review

  20. Accepted/In press

    Estimating Parameters of a Sine Wave by the Method of Variable Projection

    O'Leary, P. & Ninevski, D., 2021, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Evaluating Uniaxial Compressive Strength of Cement by Applying Ultrasonic Measurement Technique

    Roknian, P., 2021

    Research output: Thesis › Master's Thesis

  22. Published

    Evaluation of Seepage Failure of Overlying Rock in No.8105 Work Face of Zhuxianzhuang Coalmine

    Zhang, J., 2021

    Research output: Thesis › Master's Thesis

  23. Published

    Evaluation of the mechanisms of CO2-optimised chlorination reactions during the multi-metal recovery from precipitation residues of the zinc industry

    Lerche, R., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 2021, In: Surface & coatings technology. 2021, 418, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 2021, In: Surface & coatings technology. 2021, 406

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Existence, Uniqueness and Regularity of the Projection onto Differentiable Manifolds

    Steinicke, A. & Leobacher, G., 2021, In: Annals of global analysis and geometry.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Experimental Investigation on the Performance of Transition Metal Chloride in Catalyzing Coal Combustion

    Wei, H., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Experimental study and numerical simulation on rheological properties of PA66GF30 and ABS under pressure

    Gao, F., 2021

    Research output: Thesis › Master's Thesis

  29. Published

    Experimentelle Validierung der Richtlinien für die Vergleichbarkeit von Messungen zur Charakterisierung von Stoffaustauscheinbauten

    Triebl, A., Schlager, M. & Wolf-Zoellner, V., 2021.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fatigue strength assessment of additively manufactured 17-4PH structures considering surface layer effects and residual stresses

    Entfellner, P., 2021

    Research output: Thesis › Master's Thesis

  32. Published

    Fault Detection in a Combined Cycle Power Plant Based on Neural Networks of Simulated Process Data

    Rohrweck, P., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Features of thermal and hydraulic calculations in designing of cryogenic pipeline for LNG

    Basharova, L., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    FE-Simulation zur Vorhersage von Phasenspannungen mit dem Ziel der Vermeidung von Härterissen während der Wärmebehandlung

    Posch, C., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

    Zulfiqar, U., Kostoglou, N., Thomas, A. G., Rebholz, C., Matthews, A. & Lewis, D. J., 2021, In: Nanoscale. 2021, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Fluid Inclusions in Magnesites of Brumado Deposit, Bahia, Brazil

    Hauzinger, E., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Fracture Toughness Measurement

    Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices

    Buchinger, J., Wagner, A., Chen, Z., Zhang, Z., Holec, D., Mayrhofer, P. H. & Bartosik, M., 2021, In: Acta materialia. 2021, 202, p. 376-386

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fundamental material properties of the strontium-free SOC air electrode material La2Ni0.9Co0.1O4+δ

    Eisbacher-Lubensky, S. L., Egger, A., Bucher, E. & Sitte, W., 2021, 45th International Conference and Exposition on Advanced Ceramics and Composites (ICACC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Fundamental material property trends in the La0.8-xNdxCa0.2FeO3-δ series: crystal structure and thermal expansion

    Berger, C., Bucher, E., Lammer, J., Nader, C. & Sitte, W., 2021, In: Journal of materials science. 2021, 56, p. 10191–10203

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Funktionalisierung und Optimierung von Anti-Haft-Beschichtungen auf Organosilan-Basis

    Müller, M., 2021

    Research output: Thesis › Master's Thesis

  43. Published

    Generalization and Benchmarking of a Nonparametric Method for Derivative Discontinuity Detection

    Deutsch, K. H., 2021

    Research output: Thesis › Master's Thesis

  44. Published

    Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes

    Siller, M., Minkkinen, M., Bogust, P., Jelinek, A., Schatte, J., Bostrom, N., Greenland, K., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021, In: Medical physics. 2021, 48, p. 1546-1556

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Gezielte Beeinflussung der lokalen Eigenschaften von Sphäroguss unter Verwendung von 3D-gedruckten Kernen

    Brait, M., Koppensteiner, E., Schindelbacher, G. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68, 01/2021, p. 12-25

    Research output: Contribution to journal › Article › Research

  46. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Growth morphologies of dihydro-tetraaza-pentacene and -heptacene on (0001) sapphire

    Cicek, A., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    H2020 - Projekt DigiEcoQuarry

    Hartlieb, P., 2021, In: Stein & Kies : Wissenswertes zur Gewinnung mineralischer Rohstoffe in Österreich. 173

    Research output: Contribution to journal › Article › Research

  49. Published

    Hardware-in-the-loop for Simulation and Control of Greenhouse Climate

    Zaev, E., Babunski, D., Jovanovic, D., Rath, G. & Payr, M., 2021, p. 445. 448 p.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Heavy metal content of Lactuca sativa L. grown on soils from historic mining and smelting sites in Styria (Austria), determined by the electro-ultrafiltration (EUF) method and kinetic models

    Jelecevic, A., Sager, M., Vollprecht, D. & Liebhard, P., 2021, In: Journal of Elementology.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Herstellung und Testung von Wabenkatalysatoren für die Methanisierung von kohlenstoffhaltigen Prozessgasen im Labormaßstab

    Zawodnik, V., 2021

    Research output: Thesis › Master's Thesis

Previous 1...9 10 11 12 13 14 15 16 ...604 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402