Chair of Polymer Processing (350)

Organisational unit: Chair

201 - 250 out of 768Page size: 50

Publications / Theses

  1. 2017
  2. Published

    Modeling and Characterization of Conical and Parallel Co-Rotating Twin Screw Extruders

    Selvasankar, R. K., 2017

    Research output: Thesis › Doctoral Thesis

  3. Published

    Multiscale Modelling and Simulation of Flow Behavior of Polymer/Layered Silicate Nanocomposites Under Shear Flow

    Gooneie, A., 2017

    Research output: Thesis › Doctoral Thesis

  4. Published

    Optimierung der Entgasungsleistung von bedruckten LDPE-Folien in der Extrusion am Beispiel einer TVEplus Recyclinganlage

    Sochor, S., 2017

    Research output: Thesis › Master's Thesis

  5. Published

    Re-design of a polymer oil wiper for reciprocating compressors

    Radler, B., 2017

    Research output: Thesis › Master's Thesis

  6. Published

    Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

    Sapkota, J., Martinez Garcia, J. C. & Lattuada, M., 2017, In: Journal of Applied Polymer Science.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Spezielle Aspekte der Spritzgießsimulation

    Lucyshyn, T., Messiha, M. & Holzer, C., 2017, Schriftenreihe Kunststofftechnik Leoben: 26. Leobener Kunststoff-Kolloquium. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 67-76 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    The Influence of Blast Furnace Slag as a Functional Filler on Polypropylene Compounds

    Mostafa, A., 2017

    Research output: Thesis › Doctoral Thesis

  9. Published

    Vergleich der Verwertungssysteme werkstoffliches und rohstoffliches Polyolefinrecycling anhand von ausgewählten Abfallströmen

    Möllnitz, S., 2017

    Research output: Thesis › Master's Thesis

  10. Published

    Weld line quality monitoring of sealing elements using a newly designed test station

    Schmid, M., 2017

    Research output: Thesis › Master's Thesis

  11. 2016
  12. Published

    A PROCESS FOR PRODUCING SYNTHETIC PAPER AND PAPER THUS OBTAINED

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 14 Dec 2016, IPC No. B32B27/06, Patent No. EP2376284 (B1)

    Research output: Patent

  13. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced Engineering Materials. Online ISSN: 1527-2648, p. n-a

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Polymer Trends: Fused Filament Fabrication projects at MUL-KV

    Gonzalez-Gutierrez, J., 2 Dec 2016, p. 1-56. 56 p.

    Research output: Contribution to conference › Presentation › Education

  15. Published

    Characterization and Prediction of Fiber Orientation in Short Fiber Reinforced Thermoplastics

    Morak, M., Tscharnuter, D., Lucyshyn, T., Gross, T., Steinberger, R., Göttlinger, M. & Hahn, W., 16 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Rec2TecPart - Funktionsbauteile aus RecHQ

    Katschnig, M., 10 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Polymer Recyclates for Technical Parts

    Katschnig, M., Holzer, C., Hornitschek, B. & Purgleitner, B., 8 Nov 2016, Tagungsband zur 13. Recy & DepoTech-Konferenz. Leoben, Vol. 13. p. 179 - 182 4 p. 153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    The mold in the focus

    Holzer, C., 8 Nov 2016.

    Research output: Contribution to conference › Abstract

  19. Published

    3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field.

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Wautischer, G. & Suess, D., 25 Oct 2016, 61st Annual Conference on Magnetism and Magnetic Materials. p. 376 1 p. DF-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Polymer Processing - What is the Future?

    Holzer, C., 15 Oct 2016.

    Research output: Contribution to conference › Abstract

  21. Published

    Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature

    Gooneie, A., Gonzalez-Gutierrez, J. & Holzer, C., 14 Oct 2016, In: Polymers / Molecular Diversity Preservation International. 8, p. 361-380 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Holzer, C., 13 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Holzer, C., 11 Oct 2016, 2016 PPS Asia/Australia Conference. Chengdu, China, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Metal Injection Moulding of NdFeB Based on Recycled Powders

    Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    iPrint - Implantate aus dem 3D-Drucker

    Katschnig, M., Holzer, C., Zefferer, U. & Schäfer, U., 1 Oct 2016, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . IWV 96-449, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., Struklec, T., Lucyshyn, T. & Holzer, C., Oct 2016. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

    Lucyshyn, T., Burgsteiner, M., Graninger, G. & Holzer, C., Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS. Vol. 1779. 5 p. 020009

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Bonding forces in Fused Filament Fabricaiton

    Spörk, M., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  31. Published

    Influence of mold steel on injection molding process: Experimental and numerical studies

    Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Injection Molds - The Key to Quality Products

    Holzer, C. & Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Abstract

  33. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Holzer, C., Katschnig, M., Purgleitner, B. & Hornitschek, B., 29 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Physical foam extrusion of polyolefin/cycloolefin copolymer blends

    Holzer, C., Walluch, M., Uray, A. & Langecker, G., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Nanocomposites and filled Polymers

    Holzer, C., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  40. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Katschnig, M. & Holzer, C., 25 Jul 2016, The Digital Book of Abstracts. 32nd International Conference of the POLYMER PROCESSING SOCIETY, p. 287 S16-623

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Erfahrungsbericht/H2020-Factories of the Future Projekt REProMag: Resource Efficient Production of Magnets

    Schuschnigg, S., 8 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  43. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6, 6, p. 129- 146 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Instrumented injection mold for the measurement of demolding energies of micro-structured parts

    Holzer, C., 20 May 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  47. Published

    MaP "Additive Manufacturing" Lecture Series - Polymer-Implants

    Holzer, C., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Education

  48. Published

    Einfluss des relativen Druckwinkels auf die Oberflächentopologie von mittels FFF-Technik 3D-gedruckten Bauteilen

    Haar, B., Walluch, M., Anna, U., Katschnig, M. & Holzer, C., 14 Apr 2016, p. 191-192. 2 p.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  50. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501