Chair of Polymer Processing (350)

Organisational unit: Chair

1 - 50 out of 768Page size: 50

Publications / Theses

  1. 2024
  2. Published

    Manufacturing bio-based fiber-reinforced polymer composites: process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10, 1, 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., Oct 2023, In: Polymers. 15, 20, 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Stratigraphy of the Cenozoic succession in eastern Azerbaijan: Implications for petroleum systems and paleogeography in the Caspian basin

    Aghayeva, V., Sachsenhofer, R. F., van Baak, C. G. C., Bayramova, S., Ćorić, S., Frühwirth, M. J., Rzayeva, E. & Vincent, S. J., Apr 2023, In: Marine and petroleum geology. 150, 106148.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2022
  7. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 2022, In: Polymer Crystallization. 2022, 2387752.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2021
  9. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72, p. 604-612

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences (Switzerland). 11, 16

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques

    Gonzalez-Gutierrez, J., 15 Apr 2021, Reference Module in Materials Science and Materials Engineering. The Netherlands: Elsevier

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Functionally graded additive manufacturing

    Pei, E., Rumana Kabir, I., Godec, D., Gonzalez-Gutierrez, J. & Nordin, A., 9 Apr 2021, Additive Manufacturing with Functionalized Nanomaterials. Amsterdam, Neterlands, p. 35-54 20 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Resins for frontal photopolymerization: Combining depth-cure and tunable mechanical properties

    Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 2 Feb 2021, In: Materials. 14, 4, p. 1-10 10 p., 743.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., Jan 2021, In: Additive Manufacturing. 37, January 2021, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Einfluss von unterschiedlichen Schmelzrippen-Geometrien auf die Dichtheit von Kunststoffumspritzungen von Steckverbindern

    Preissegger, F., 2021

    Research output: Thesis › Master's Thesis

  19. 2020
  20. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

    Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences. 10, 22, p. 1-23 23 p., 7993.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spoerk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., Oct 2020, In: Additive Manufacturing. 35, 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

    Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  28. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13, 14, 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    An Overview of Material Extrusion Troubleshooting

    Loh, G. H., Pei, E., Gonzalez-Gutierrez, J. & Monzon, M., 11 Jul 2020, In: Applied Sciences. 10, 14, 28 p., 4776.

    Research output: Contribution to journal › Review article › peer-review

  30. Published

    Research and Implementation of Axial 3D Printing Method for PLA Pipes

    Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J. & Lammer, H., 7 Jul 2020, In: Applied Sciences. 10.2020, 13, 19 p., 4680.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A Production Method for Standardized Continuous Fiber Reinforced FFF Filament

    Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 May 2020, In: Biomaterials and Medical Applications. 4.2020, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

    Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  34. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

    Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication

    Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

    Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Development of new treatment methods for multi material textile waste

    Jenull-Halver, U., Holzer, C., Piribauer, B. & Quartinello, F., 10 Jan 2020, AIP Conference Proceedings 2205. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Development of a PAT-controlled process for the production of pharmaceutical polymers with low drug concentration

    Heindl, N., 2020

    Research output: Thesis › Master's Thesis

  41. Published

    Development of Ceramic Feedstocks for Fused Filament Fabrication

    Cano Cano, S., 2020

    Research output: Thesis › Doctoral Thesis

  42. Published

    Process validation and optimization of a two-step two-component direct bonding between thermoplastic and rubber

    Huber, S., 2020

    Research output: Thesis › Master's Thesis

  43. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  45. 2019
  46. Published

    Determination of residual moisture on four composite films

    Duretek, I. & Winkler, S., 17 Dec 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Material data determination for one MIM-feedstock for injection molding simulation

    Duretek, I., 17 Dec 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  49. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

    Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019, In: Journal of Applied Polymer Science. 137, 12, 16 p., 48545.

    Research output: Contribution to journal › Literature review › peer-review

  51. Published

    Vergleichende Härte-Untersuchungen von zwei unterschiedlichen Granulat-Chargen eines PBT-Compounds

    Duretek, I., 1 Oct 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  52. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Bestimmung der Stoffdaten an einem PPE/PS-I-Blend

    Duretek, I., 27 Sept 2019, 9 p.

    Research output: Book/Report › Commissioned report › Research

  54. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PA12

    Duretek, I., 23 Sept 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  55. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten eines Cyclic Block Copolymer

    Duretek, I., 11 Sept 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  56. Published

    Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

    Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept 2019, In: Additive Manufacturing. 30.2019, December, 8 p., 100861.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501