Chair of Mechanics (400)

Organisational unit: Chair

101 - 150 out of 699Page size: 50

Publications / Theses

  1. 2017
  2. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H. P., Antretter, T., Brunner, R. & Kiener, D., 15 Mar 2017, In: Scripta materialia. 130, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  5. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced Engineering Materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., 31 Jan 2017, In: Advanced Engineering Materials. 19, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 19 Jan 2017, In: Modelling and simulation in materials science and engineering. 25, p. 035004 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Atomistic modelling-based design of novel materials

    Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, P. H., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 2017, In: Advanced Engineering Materials. 19, 4, 19 p., 1600688.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Au55, a stable glassy cluster, results of ab initio calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 2017, In: Beilstein journal of nanotechnology . 8, p. 2221-2229

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Au55, A Stable Glassy Cluster: Results of Ab Initio Calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 2017, In: Beilstein journal of nanotechnology (Online-Ressource). 8, p. 2221-2229

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Austenite Grain Growth in a Microalloyed X80 Line Pipe Steel

    Tichauer, W., 2017

    Research output: Thesis › Master's Thesis

  13. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F. D. & Svoboda, J., 2017, In: Acta materialia. 129, p. 331-342

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Beurteilung des Gefährdungspotentials von Porenbildung in Polymeren beim Einbetten elektronischer Komponenten in der Medizintechnik

    Prabitz, K., 2017

    Research output: Thesis › Master's Thesis

  15. Published

    Calibration of Phase Field Parameters Demonstrated on Kinetics of Shrinking Single Grain

    Fischer, F. D., Zickler, G. & Svoboda, J., 2017, In: Philosophical magazine : Letters. 97, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 2017, In: Materials characterization. 128, p. 257–268

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

    Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, p. 168-174

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Couples and Pairs Formation – Thermodynamic and Kinetic Modelling Applied to Al-Mg-Si

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2017, In: Modelling and simulation in materials science and engineering. 25, p. 065011-1-15

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Crack Driving Force in Twisted Plywood Structures

    Fischer, F. D., Kolednik, O., Predan, J., Razi, J. & Fratzl, P., 2017, In: Acta biomaterialia. 55, p. 349-359

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Lecture within the Training School: The challenge of CRMs in extreme condition: advanced multidisciplinary view

    Gamsjäger, E., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Modelling of grain refinement driven by negative grain boundary energy

    Fischer, F. D., Zickler, G. & Svoboda, J., 2017, In: Philosophical magazine. 97, p. 1963-1977

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    New approach for the simulation of chain drive dynamics with consideration of the elastic environment

    Grinschgl, M., Reich, F. M., Abeltshauser, R., Eder, M. & Antretter, T., 2017, In: Proceedings of the Institution of Mechanical Engineers Engineers, Part K, Journal of multi-body dynamics. p. 103-120

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104, p. 78-92

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Optimization of a quick-release fastener for cutting discs in industrial mining applications

    Kernbichler, C., 2017

    Research output: Thesis › Master's Thesis

  29. Published

    Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences

    Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F. D. & Dehm, G., 2017, In: Acta materialia. 124, p. 195-203

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Quantification of the material inhomogeneity effect in thin metallic film stacks

    Kozic, D., 2017

    Research output: Thesis › Doctoral Thesis

  31. Published

    Structure and surface energy of Au55 nanoparticles: An ab initio study

    Holec, D., Fischer, F. D. & Vollath, D., 2017, In: Computational materials science. 134, p. 137-144

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F.-D., 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 17-29

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermodynamic Treatment of Diffusive Phase Transformation (Reactive Diffusion)

    Fischer, F. D. & Svoboda, J., 2017, Handbook of Solid State Diffusion: Diffusion Fundamentals and Techniques. Paul, A. & Divinski, S. (eds.). Amsterdam, Vol. 1. p. 391-434

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. 2016
  35. Published

    Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures

    Angerer, P., Schöngrundner, R., Macurova, K., Wiessner, M. & Keckes, J., 1 Dec 2016, In: Powder diffraction. 31, 4, p. 267-273 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

    Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 11 Nov 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Microstructural evolution - experiments and modeling

    Gamsjäger, E., Wießner, M., Militzer, M. & Garcin, T., 6 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Failure of Hot-Dip Galvanized Steel Parts

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    A Mean-Field Model for TRIP - Algorithms and Parameter Identification

    Petersmann, M. & Antretter, T., 24 Aug 2016.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Heat capacaties and entropies of molybdates and carbonates

    Gamsjäger, E. & Gamsjäger, H., 25 Jul 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Strategies for the optimization of computationally generated microstructures in nanocrystalline Ni50Ti

    Petersmann, M., 10 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Microwave irradiation as means of alternative rock extraction technology

    Hartlieb, P., Toifl, M. & Grafe, B., 19 May 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Analyse eines Wälzlagerprüfstands hinsichtlich Steifigkeit und dynamischer Belastung

    Zellhofer, M., 2016

    Research output: Thesis › Diploma Thesis

  52. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001