Chair of Materials Physics (430)

Organisational unit: Chair

601 - 700 out of 1,619Page size: 100

Publications / Theses

  1. 2016
  2. Published

    Electro-mechanical based failure criteria for flexible electronics

    Cordill, M., Glushko, O. & Putz, B., 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Electro-Mechanical Behaviorof Single and Multilayer Metal Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Kirchlechner, C., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Electro-mechanical performance of thin gold films on polyimide

    Putz, B., Glushko, O. & Cordill, M., 2016, In: MRS Advances. 1, 12, p. 773-778

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Electro-Mechanical testing of conductive materials used in flexible electronics

    Cordill, M., Glushko, O. & Putz, B., 2016, In: Frontiers in Materials. 3, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Electromigration in gold films on flexible polyimide substrates as a self-healing mechanism

    Putz, B., Glushko, O. & Cordill, M., 2016, In: Materials Research Letters [Elektronische Ressource]. 4, 1, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries

    Balach, J., Jaumann, T., Mühlenhoff, S., Eckert, J. & Giebeler, L., 2016, In: Chemical Communications. 52, 52, p. 8134-8137 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting

    Gustmann, T., Neves, A., Kühn, U., Gargarella, P., Kiminami, C. S., Bolfarini, C., Eckert, J. & Pauly, S., 2016, DDMC 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Fracture and Delamination of Cu-Nb multilayer films on polyimide

    Cordill, M., Kleinbichler, A., Economy, D. R. & Kennedy, M. S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Fracture of Severely Plastically Deformed Metals

    Hohenwarter, A., Pippan, R., Völker, B., Kapp, M. W., Kammerhofer, C. & Leitner, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Fracture of Severely Plastically Deformed Niobium and Tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Fracture of ultrafine-grained and nanocrystalline materials

    Hohenwarter, A., Völker, B., Leitner, T. & Kapp, M. W., 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/ SiOx multilayers

    Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 2016, In: Materials & design. 104, p. 227-234 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of Annealing Treatments on the Adhesion Metal Barrier Layers

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Influence of Annealing Treatments on the Adhesion Metal Barrier Layers

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Influence of extreme thermal cycling on metal polymer interfaces

    Putz, B., Butenko, Y., Milassin, G., Semprimoschnig, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Influence of extreme thermal cycling on metal polymer interfaces for space applications

    Putz, B., Cordill, M., Milassin, G., Butenko, Y. & Semprimoschnig, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Influence of extreme thermal cycling on metal polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Semprimoschnig, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    In-situ electro-mechanical fragmentation testing with synchrotron radiation

    Putz, B., Glushko, O., Marx, V., Kirchlechner, C., Többens, D. & Cordill, M., 2016, In: MRS Advances. 1, 12

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    In-situ electro-mechanical fragmentation testing with synchrotron radiation

    Putz, B., Glushko, O., Kirchlechner, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    In-situ methods to study electro-mechanical behavior of flexible electronic materials

    Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    In-situ Methods to Study the Electro-Mechanical Properties of Mo Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Glushko, O., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Integrated experimental and computational approach for residual stress investigation near through-silicon vias

    Deluca, M., Hammer, R., Keckes, J., Kraft, J., Schrank, F., Todt, J., Robach, O., Micha, J. S. & Defregger, S., 2016, In: Journal of applied physics. 120, 19

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Interface controlled microstructure evolution in nanolayered thin films

    Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Interplay between sample size and grain size: Singlec rystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    MACRO- and MICROSCOPIC Properties of Gradient Ultra-High-Strength seamless Steel Tubes Produced by dedicated thermo-mechanical treatments

    Winter, G., Klarner, J., Buchmayr, B. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Mechanical Adhesion Testing Techniques for Metal Dielectric Interfaces

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Mechanical Behavior of Cu-Nb Multilayer Films Evaluated with In-situ Fragmentation Methods

    Cordill, M., Kleinbichler, A., Economy, D. R. & Kennedy, M. S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Mechanical properties of severely plastically deformed niobium and tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Mechanical stability of printed metallizations on polymer substrates

    Glushko, O., Cordill, M., Klug, A. & List-Kratochvil, E. J. W., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Micromechanical Characterization of Self-Organized Ti1-xAlxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour

    Meindlhumer, M., 2016

    Research output: Thesis › Master's Thesis

  38. Published

    Microstructural and mechanical investigations of thermo-mechanically loaded Cu films using a thermal laser cycling device

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 2016.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Miniaturized Fracture Concepts for Stressed Multi-layer Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Nano-machining for advanced X-ray crystal optics

    Záprazný, Z., Korytár, D., Jergel, M., Šiffalovič, P., Halahovets, Y., Keckes, J., Matko, I., Ferrari, C., Vagovič, P. & Mikloška, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films

    Todt, J., 2016

    Research output: Thesis › Doctoral Thesis

  45. Published

    Nanostructured CVD coatings and cemented carbides-A perfect match?

    Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 2016, World PM 2016 Congress and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    New advances in high pressure torsion processing

    Hohenwarter, A., Martin, R. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Novel TiALN coating with special nanostructure, deposited by HR MT-CVD [Neuartige TiALN-Beschichtung mit spezieller nanostruktur, abgeschieden mittels HR MT-CVD]

    Pitonak, R., Köpf, A., Weißenbacher, R., Keckes, J. & Tod, J., 2016, In: Keramische Zeitschrift. 68, 2, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

    Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications

    Zhang, L. C., Attar, H., Calin, M. & Eckert, J., 2016, In: Materials Technology. 31, 2, p. 66-76 11 p.

    Research output: Contribution to journal › Review article › peer-review

  50. Published

    Size effects on the electro-mechanical behavior of flexible film systems

    Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Specimen preparation to analyze the fracture surface of nanocrystalline pearlite

    Sackl, S. C., Leitner, T., Turk, C., Riedl, H. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Strain-induced phase transformation of a thin Co film on flexible substrates

    Marx, V. M., Kirchlechner, C., Breitbach, B., Cordill, M., Többens, D. M., Waitz, T. & Dehm, G., 2016, In: Acta materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Structural changes in amorphous SiO2 films revealed by in-situ stress measurements up to 1000C

    Bigl, S. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Structure-stress relationships in nanocrystalline multi-layered AlCrN coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  57. Published

    The effect of bending loading conditions on the reliability of inkjet printed and evaporated silver metallization on polymer substrates

    Glushko, O., Cordill, M., Klug, A. & List-Kratochvil, E. J. W., 2016, In: Microelectronics Reliability.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

    Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2015
  60. Published

    Deformation-induced martensitic transformation in Cu-Zr-Zn bulk metallic glass composites

    Wu, D., Song, K., Cao, C., Li, R., Wang, G., Wu, Y., Wan, F., Ding, F., Shi, Y., Bai, X., Kaban, I. & Eckert, J., 1 Dec 2015, In: Metals : open access journal . 5, 4, p. 2134-2147 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Fatigue threshold of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    In-Situ Measurements of Free-Standing, Ultra-Thin Film Cracking in Bending

    Hintsala, E., Kiener, D., Jackson, J. & Gerberich, W. W., 1 Nov 2015, In: Experimental mechanics. 55, 9, p. 1681-1690 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Fracture behavior of high strength pearlitic steel wires

    Völker, B., Kapp, M. W., Pippan, R. & Hohenwarter, A., 5 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Confirming the Dual Role of Etchants during the Enrichment of Semiconducting Single Wall Carbon Nanotubes by Chemical Vapor Deposition

    Ibrahim, I., Kalbacova, J., Engemaier, V., Pang, J., Rodriguez, R. D., Grimm, D., Gemming, T., Zahn, D. R. T., Schmidt, O. G., Eckert, J. & Rümmeli, M. H., 8 Sept 2015, In: Chemistry of materials. 27, 17, p. 5964-5973 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    The influence of grain size on the fatigue crack growth of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 11 Aug 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content

    Cao, F., Jia, Y., Prashanth, K. G., Ma, P., Liu, J., Scudino, S., Huang, F., Eckert, J. & Sun, J., 5 Jun 2015, In: Materials and Design. 74.2018, 6, p. 150-156 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Influence of annealing on microstructure and magnetic properties of cobalt-based amorphous/nanocrystalline powders synthesized by mechanical alloying

    Taghvaei, A. H., Bednarčik, J. & Eckert, J., 25 May 2015, In: Journal of alloys and compounds. 632.2015, May, p. 296-302 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Microstructure and chemistry evolution due to heat treatments after severe plastic deformation of a CrMnFeCoNi alloy

    Völker, B., Schuh, B. & Hohenwarter, A., 7 May 2015.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Microstructure and mechanical properties of CuxNb1- x alloys prepared by ball milling and high pressure torsion compacting

    Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Self-Organized TiO2/CoO Nanotubes as Potential Anode Materials for Lithium Ion Batteries

    Madian, M., Giebeler, L., Klose, M., Jaumann, T., Uhlemann, M., Gebert, A., Oswald, S., Ismail, N., Eychmüller, A. & Eckert, J., 4 May 2015, In: ACS Sustainable Chemistry and Engineering. 3, 5, p. 909-919 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes

    Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.

    Research output: Contribution to conference › Presentation › Research

  75. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications : TTP, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Einfluss der Korngröße auf des Rissfortschrittsverhalten von Nickel

    Leitner, T., Hohenwarter, A. & Pippan, R., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Site Specific Microstructural Evolution of Thermo-mechanically Fatigued Copper Films

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 18 Feb 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 235-239 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Small scale mechanical testing of irradiated materials

    Hosemann, P., Shin, C. & Kiener, D., 27 Jan 2015, In: Journal of materials research (JMR). 30, 9, p. 1231-1245 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Electron Backscatter Diffraction – How to read this information on polycrystalline films

    Wurster, S., Bigl, S., Renk, O., Gludovatz, B., Hohenwarter, A., Motz, C., Kiener, D. & Pippan, R., 22 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  84. Published

    Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy

    Li, J. H., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F. & Schumacher, P., 1 Jan 2015, In: Materials characterization. 102, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Direct synthesis of graphene from adsorbed organic solvent molecules over copper

    Pang, J., Bachmatiuk, A., Fu, L., Mendes, R. G., Libera, M., Placha, D., Martynková, G. S., Trzebicka, B., Gemming, T., Eckert, J. & Rümmeli, M. H., 1 Jan 2015, In: RSC Advances. 5, 75, p. 60884-60891 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Bruchmechanismen in AlSiCu Gusslegierungen

    Papenberg, N. P., 2015

    Research output: Thesis › Diploma Thesis

  87. Published

    Characterization of fatigue crack growth with the configurational force concept

    Ochensberger, W., 2015

    Research output: Thesis › Doctoral Thesis

  88. Published

    Combined atomic force and electron microscopy instrumentation to study microscale plasticity

    Kreith, J., 2015, 108 p.

    Research output: Thesis › Doctoral Thesis

  89. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P. H., 2015, In: Acta Materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P., 2015, In: Acta materialia. 83, p. 276-284

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Cryogenic nanoindentation of single crystalline Copper, Chromium and Tungsten

    Esterl, R., 2015, 71 p.

    Research output: Thesis › Diploma Thesis

  93. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Deformation behavior of ultra-fine porous Au

    Leitner, A., Maier-Kiener, V., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  95. Published

    Deformation mechanisms of single crystal Mg studied by in-situ SEM and TEM micromechanical testing

    Kiener, D., Alfreider, M., Jeong, J. & Oh, S. H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  96. Published

    Deformation mechanisms of single crystal Mg studied by in-situ SEM and TEM micromechanical testing

    Kiener, D., Alfreider, M., Jeong, J. & Oh, S. H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    Determination of residual stresses and fracture properties on a local scale

    Kiener, D., Treml, R., Kozic, D., Brunner, R., Keckes, J. & Zechner, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    Dry-blasting of CVD α-Al2O3 hard coatings: Influence of blasting media size, hardness and coating texture on the stress-depth gradients investigated by X-ray nanodiffraction

    Tkadletz, M., Schalk, N., Keckes, J., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  99. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Fabrication and thermo-mechanical behavior of ultra-fine porous copper

    Kreuzeder, M., Abad, M. D., Primorac, M.-M., Hosemann, P., Maier, V. & Kiener, D., 2015, In: Journal of materials science. 50, p. 634-643

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...17 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112