Tanja Lube

1 - 100 out of 139Page size: 100

Publications / Theses

  1. 2021
  2. E-pub ahead of print

    Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

    Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 2 Sept 2021, (E-pub ahead of print) In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., 17 Apr 2021, In: Open ceramics. 6.2021, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Fracture Toughness Measurement

    Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. 2020
  6. Published

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 30 Jul 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4737-4745

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13, 14, 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

    Klünsner, T., Lube, T., Gettinger, C., Walch, L. & Pippan, R., 12 Feb 2020, In: Acta materialia. 188, p. 30-39

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2019
  10. Published

    Strength of Lithography-Based Alumina

    Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Festigkeit von additiv gefertigtem Aluminiumoxid

    Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

    Nindhia, T. G. T. & Lube, T., 2019, In: IOP Conference Series: Materials Science and Engineering. 622, 012001.

    Research output: Contribution to journal › Article › Transfer › peer-review

  15. Published

    Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Nindhia, T. G. T. & Lube, T., 2019, In: Materials Science Forum. p. 205-209

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2018
  17. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Fracture Toughness (KIC) of Lithography Based Manufactured Alumina Ceramic

    Nindhia, T. G. T., Schlacher, J. C. & Lube, T., 2018, In: IOP Conference Series: Materials Science and Engineering. 012022.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs

    Belli, R., Wendler, M., Petschelt, A., Lube, T. & Lohbauer, U., 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5533-5544 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Mechanische Eigenschaften von gedruckten Keramiken

    Lube, T., Schlacher, J., Harrer, W., Danzer, R., Mitteramskogler, G. & Schwentenwein, M., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 229-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2017
  23. Published

    Additive Fertigung von Keramiken

    Lube, T. & Harrer, W. S., 13 Nov 2017.

    Research output: Contribution to conference › Poster › Transfer

  24. Published

    Strength of Al2O3-Ceramic Produced by the LCM Additive Manufacturing Technology

    Lube, T., Schlacher, J. C., Harrer, W. S., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Chairside CAD/CAM materials. Part 2: flexural strength testing

    Belli, R., Wendler, M., Petschelt, A., Mevec, D., Lube, T., Harrer, W., Danzer, R. & Lohbauer, U., 2017, In: Dental Materials. 33, 1, p. 99-109 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

    Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Lifetime Prediction of Ceramic Components - A Case Study on Hybrid Rolling Contact

    Khader, I., Rasche, S., Lube, T., Raga, R., Degenhardt, U. & Kailer, A., 2017, In: Engineering Fracture Mechanics. 169, p. 292-308 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Strength behaviour of etched Zerodur®

    Lube, T. & Béhar-Lafenêtre, S., 2017, In: Journal of the European Ceramic Society. 37

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2016
  31. Published

    Messung der Bruchzähigkeit mit dem B3B-Test

    Lube, T. & Rasche, S., 4 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data

    Othmani, Y., Böhlke, T., Lube, T., Fellmeth, A., Chlup, Z., Colonna, F. & Hashibon, A., 2016, In: Journal of the European Ceramic Society. 36, p. 1109-1125 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A New Fracture Toughness Test for Ceramic Discs and Plates

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    B3B-KIc fracture toughness test – geometric function formulae for semi-elliptical surface cracks in bi-axial bending

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016, In: Journal of the American Ceramic Society. 99, 1, p. 249–256

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Biaxial strength testing of dental CAD/CAM block materials

    Wendler, M., Belli, R., Petschelt, A., Mevec, D., Harrer, W., Lube, T., Danzer, R. & Lohbauer, U., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Die Messung der Bruchzähigkeit von Keramiken: State of the Art und neue Methoden

    Danzer, R. & Lube, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Fracture toughness of Ceramic Discs and Plates

    Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Recent Advances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Recent Andvances on Fast Fracture Strength of Zerodur® for Space Applications

    Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

    Research output: Contribution to conference › Paper › peer-review

  40. 2015
  41. Published

    Vertraulicher Bericht: Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  42. Published

    Vertraulicher Bericht: Publizierbarer Endbericht (P048-F-02-03)

    Preis, W., Bucher, E., Sitte, W., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Lube, T., Kusnezoff, M., Lawlor, V. & Werl, M., 3 Dec 2015

    Research output: Book/Report › Commissioned report › Research

  43. Published

    The importance of mechanical testing for design with ceramics

    Lube, T., 7 Oct 2015.

    Research output: Contribution to conference › Paper › peer-review

  44. Published

    Determination of fracture toughness of small discs using the ball-on-three-balls test

    Lube, T., Rasche, S., Nindhia, T. G. T. & Strobl, S., 22 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Bruchzähigkeitsmessung an keramischen Scheiben und Platten

    Lube, T., Rasche, S. & Nindhia, T. G. T., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Macroscopic damage modeling for silicon nitride

    Ruck, J., Othmani, Y., Lube, T., Khader, I., Kailer, A. & Böhlke, T., 2015, In: Proceedings in applied mathematics and mechanics. 15, p. 147-148 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Testing Methods on Ceramic Rolling Elements for Hybrid Bearings

    Schöppl, O. & Lube, T., 2015, In: Materials Performance and Characterization. 4, 1

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2014
  50. Published

    Vertraulicher Zwischenbericht vom 25.4.2014 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Lawlor, V., Janics, A., Hochenauer, C. & Kusnezoff, M., 25 Apr 2014

    Research output: Book/Report › Commissioned report › Transfer

  51. Published

    Apparent R-curve of Laminates with Strong Interfaces made from Al2O3 and Al2O3/ZrO2-Composites

    Lube, T., 2014, Encyclopedia of Thermal Stresses. p. 6643-6647

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Ber-08-2014-RoLiCer: RoLiCer Deliverable 2.1: Tool for Calculation of Stress Intensity Factors

    Rasche, S. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  53. Published

    Ber-28-2014-RoLiCer: RoLiCer Deliverable 8.4: Workshop “metal forming” September 2014

    Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  54. Published

    Ber-34-2014-RoLiCer: RoLiCer Deliverable 6.3: Optimal surface finish for ceramic balls

    Lube, T., Harrer, W. & Vieillard, C., 2014

    Research output: Book/Report › Commissioned report › Transfer

  55. Published

    Ber-35-2014-ELTSECCS: Deliverable: 4.1 Materialparameter als Funktion unterschiedlicher Betriebsbedingungen

    Lube, T. & Harrer, W., 2014

    Research output: Book/Report › Commissioned report › Transfer

  56. Published

    Ber-57-2014-RoLiCer: RoLiCer Deliverable 5.6: Industrial Field test: Wire Rolling Analysis and documentation

    Harrer, W. & Lube, T., 2014

    Research output: Book/Report › Commissioned report › Transfer

  57. Published

    Ber-66-2014-RoLiCer: RoLiCer @ MUL: Periodic Report (Month 36)

    Lube, T. & Rasche, S., 2014

    Research output: Book/Report › Commissioned report › Transfer

  58. Published

    Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test

    Rasche, S., Strobl, S., Kuna, M., Bermejo Moratinos, R. & Lube, T., 2014, In: Procedia Materials Science. p. 961-966

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Ermüdungsbruch in Siliziumnitrid

    Lube, T., Khader, I., Kailer, A., Degenhardt, U. & Berroth, K., 2014, Fortschritte in der Metallographie. p. 353-357

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  60. Published

    Fracture toughness testing of small ceramic discs and plates

    Strobl, S., Rasche, S., Krautgasser, C., Sharova, E. & Lube, T., 2014, In: Journal of the European Ceramic Society. p. 1637-1642

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  62. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Toughness measurement on ball specimens. Part II: Experimental procedure and measurement uncertainties

    Strobl, S., Lube, T. & Schöppl, O., 2014, In: Journal of the European Ceramic Society. p. 1881-1892

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2013
  65. Published

    Ber-08-2013-RoLiCer: RoLiCer @ MUL: MONTH 10 - 15

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  66. Published

    Ber-09-2013-RoLiCer: RoLiCer Deliverabele 6.1: Fatigue under cyclic loading with R = -1

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  67. Published

    Ber-14-2013-RoLiCer: RoLiCer Deliverable 8.2: Workshop “Fracture Mechanics” at MUL, May 2nd – 3rd, 2013

    Lube, T., 2013

    Research output: Book/Report › Commissioned report › Transfer

  68. Published

    Ber-20-2013-RoLiCer: RoLiCer @ MUL: Periodic Report (MONTH 18)

    Lube, T. & Rasche, S., 2013

    Research output: Book/Report › Commissioned report › Transfer

  69. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Vertraulicher Zwischenbericht vom 9.4.2013 (P048-F-02-03)

    Preis, W., Bucher, E., Egger, A., Perz, M., Schrödl, N., Waldhäusl, J., Sitte, W., Lube, T., Weirum, G., Janics, A., Hochenauer, C. & Kusnezoff, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Zyklische Ermüdung technischer Keramiken in wässrigen Medien

    von der Wehd, C., Lube, T., Berroth, K., Khader, I., Kailer, A. & Degenhardt, U., 2013, Fortschritte in der Werkstoffprüfung für Forschung und Praxis. p. 379-384

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. 2012
  73. Published

    A Residual Stress Intensity Factor Solution for Knoop Indentation Cracks

    Lube, T., Fett, T., Fünfschilling, S., Hoffmann, M. & Oberacker, R., 2012, In: International Journal of Fracture. 175, p. 65-71

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Ber-41-2012-Rolicer: RoLiCer @ MUL: MONTH 1 - 3

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer

  75. Published

    Ber-42-2012-Rolicer: RoLiCer @ MUL: MONTH 4 - 9

    Lube, T. & Rasche, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    The Effect of Defects and Materials Texture on the Fracture of Low-Pressure Injection Moulded Alumina Components

    Lube, T., Morrell, R. & Kraleva, I., 2012, Fractography of Glasses and Ceramics VI. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  79. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  80. 2011
  81. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, In: Key engineering materials. 465, p. 41-46

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Sub-critical crack growth in alumina - a comparison of different measurement and evaluation methods

    Lube, T. & Baierl, R., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 450-458

    Research output: Contribution to journal › Article › Research › peer-review

  85. 2010
  86. Published

    Aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics

    Lord, D. J., Roebuck, B., Morrell, R. & Lube, T., 2010, In: Materials science and technology. 26, p. 127-148

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  89. Published

    Fracture Toughness of Silicon Carbide Whisker Reinforced High Alumina Refractory

    Nindhia, T. T. G. & Lube, T., 2010, Proceedings of the 18th European Conference on Fracture. p. 836-840

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2010, In: MP materials testing : Materialprüfung . p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. 2009
  93. Published

    Comparison of Fracture Toughness Testing by the SEVNB- and the SCF Method in Silicon Nitride

    Nindhia, T. T. G. & Lube, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Fracture Toughness of Silicon Nitride measured by the Surface Crack in Flexure Method

    Lube, T. & Nindhia, T. T. G., 2009, 9. Tagung Gefüge und Bruch. p. P9-P9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Fracture Toughness of Silicon Nitride measured by the Surface Crack in Flexure Method

    Nindhia, T. T. G. & Lube, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Influence of an Apparent R-curve on Strength and Fracture Statistics of Ceramic Laminates

    Danzer, R., Pascual-Hererro, J. & Lube, T., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1137-1144

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of the Sample Size on the Results of B3B-Tests

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2009, In: Key engineering materials. 409, p. 176-184

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2009, Proceedings zu "9. Tagung Gefüge und Bruch". p. 211-220

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. 2008
  100. Published

    Comparative Study of the R-curve Behaviour of Al2O3-ZrO2 Laminates designed with External and Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, Proceedings of the X International Conference of the European Ceramic Society. p. 243-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugel-Versuch

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R. J., 2008, In: Advanced Engineering Materials. 10, p. 275-298

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Fracture Statistics of Ceramic Laminates Strengthened by Compressive Residual Stresses

    Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1551-1556

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Influence of Contact Stress on the Determination of Strength in the Ball-on-Three-Balls Test

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 18-32

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Optimal Strength and Toughness of Al2O3-ZrO2-Laminates Designed with External or Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1575-1583

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Strength of Small Ceramic Specimens - A Limit to Weibull Statistics

    Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1266-1270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    The Ball on Three Balls Test: Strength Testing of Specimens of Different Sizes and Geometries

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1271-1275

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. 2007
  109. Published

    A Silicon Nitride Reference Material - A Testing Program of ESIS TC6

    Lube, T. & Dusza, J., 2007, In: Journal of the European Ceramic Society. 27, p. 1203-1209

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Der 4-Kugel-Versuch: Prüfung der Festigkeit scheiben- und plattenförmiger Bauteile

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  111. Published

    Effective Elastic Properties and Damping Behaviour of Alumina-Alumina/Zirconia Laminates

    Lambrinou, K., van der Biest, O., Lube, T., Tassini, N., Patsias, S., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1307-1311

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Effective Fracture Toughness in Al2O3-Al2O3/ZrO2 Laminates

    Lube, T., Pascual-Herrero, J., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1449-1453

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2007, In: Key engineering materials. 333, p. 251-254

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Influence of Contact Damage on Strength and Fractography of Ball on Three Balls Test Specimens

    Danzer, R., Harrer, W., Lube, T. & Supancic, P., 2007, Fractography of Glasses and Ceramics V. p. 203-214

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 1 2 Next
View graph of relations

Contact

Phone: 4111

Latest Research Output

View more (139)