Stephan Schuschnigg

1 - 94 out of 94Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72, p. 604-612

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2020
  5. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  6. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13, 14, 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  8. Published

    Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

    Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication

    Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2019
  11. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  12. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  14. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  15. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  17. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2018
  19. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  20. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11, p. 2-36 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  23. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguz, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 134, p. 1 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers / Molecular Diversity Preservation International. 10, 490, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 259-260 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. 2017
  32. Published

    3D Printing of Polymer-Bonded Rare-Earth Magnets with a Variable Magnetic Compound Fraction for a Predefined Stray Field

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Vogler, C., Wautischer, G., Windl, R. & Suess, D., 1 Dec 2017, In: Scientific Reports. 7, 1, 9419.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    FFF Material und Prozess

    Schuschnigg, S., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. p. 200 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    WerWasWo.Forschung@MUL 2017: Forschungsprojekte, vorgestellt anlässlich der Posterpräsentation WerWasWo.Forschung@MUL

    Schuschnigg, S., 15 Nov 2017, 6 ed. Leoben: Eigenverlag. 303 p.

    Research output: Book/Report › Anthology › Research

  35. Published

    Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov 2017, In: Plastics, rubber and composites. 47, 1, p. 17-24 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  37. Published

    A Review of Multiscale Computational Methods in Polymeric Materials

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2017, In: Polymers / Molecular Diversity Preservation International. 9, 1, 16.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  39. 2016
  40. Published

    3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field.

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Wautischer, G. & Suess, D., 25 Oct 2016, 61st Annual Conference on Magnetism and Magnetic Materials. p. 376 1 p. DF-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Special Materials and Technologies for Fused Filament Fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Holzer, C., 11 Oct 2016, 2016 PPS Asia/Australia Conference. Chengdu, China, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  44. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  46. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Erfahrungsbericht/H2020-Factories of the Future Projekt REProMag: Resource Efficient Production of Magnets

    Schuschnigg, S., 8 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  48. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  50. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

  53. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Neue Materialien im Fused Filament Fabrication (FFF) Verfahren

    Schuschnigg, S., 11 Mar 2016.

    Research output: Contribution to conference › Presentation › Transfer

  55. Published

    Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Dissipative Particle Dynamics Models of Orientation of Weakly-Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: AIP Conference Proceedings. 050010.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  60. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, p. 189. 190 p.

    Research output: Contribution to conference › Abstract

  61. 2015
  62. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts under Shear Flow: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 29 Sept 2015, In: Macromolecular Theory and Simulations. 25.2016, 1, p. 85-98 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  65. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Abstract from PPS2015 - Polymer Processing Society Conference 2015, Graz, Austria. p. 144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015, Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Material Forming ESAFORM 2015: Selected, peer reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, In: Key engineering materials. 651-653, p. 533-538 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Numerical simulations of the flow of wood polypropylene composites with wall slipping in a profile die: The significance of material data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2015, In: AIP Conference Proceedings. 1664, 1

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, The 2nd International Conference on Rheology and Modeling of Materials, Book of abstracts. p. 51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. 2014
  74. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., Perko, L., Schuschnigg, S. & Holzer, C., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014, WerWasWo.Forschung@MUL. p. 210-210

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  79. Published

    WerWasWo.Forschung@MUL 2014

    Schuschnigg, S. (Editor), 2014, Eigenverlag. (WerWasWo; vol. 5)

    Research output: Book/Report › Book › Transfer

  80. 2013
  81. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Dielectric ResidenceTime Measurements on Single Screw Extruders

    Schuschnigg, S., Reinberger, W., Holzer, C. & Fertschej, A., 2013, PPS-29 Polymer Processing Scociety. p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. 2012
  85. Published

    Arbeitsgruppe Extrusion Lehrstuhl für Kunststoffverarbeitung

    Schuschnigg, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Rheologie von Kunststoffschmelzen

    Duretek, I. & Schuschnigg, S., 2012, VDI Wissensforum, Extrusionswerkzeuge für Rohre und Profile. p. 1-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2011
  88. Published

    Numerical modelling of flow in conical co-rotating twin screw extruder

    Selvasankar, R. K., Schuschnigg, S., Fertschej, A. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Verweilzeitmessung in Extrudern mittels dielektrischer Substanzen

    Schuschnigg, S., Fertschej, A., Silberhorn, M. & Holzer, C., 2011, 2. Tagung Innovation Messtechnik. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. 2010
  91. Published

    A Conical Co-Rotating Machine Puts on the Pressure

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe <München> / Kunststoffe international. p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Extrusion am IKV-Leoben, Ausgewählte Projekte aus der aktuellen Forschung

    Holzer, C., Laske, S., Fertschej, A. & Schuschnigg, S., 2010, Extrusionstechnik 2010 - Hochleistungsextrusion und Betriebskostenoptimierung. p. 81-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  93. Published

    Konischer Gleichläufer macht Druck

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe. p. 80-83

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Theoretische und experimentelle Betrachtung eines kämmend konisch gleichlaufenden Doppelschneckenextruders

    Schuschnigg, S., Selvasankar, R. K. & Klammer, G., 2010, In: VLK-News. p. 16-17

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Three dimensional modelling of flow in the pressure build-up zone of the new conical co-rotating twin screw extruder

    Selvasankar, R. K. & Schuschnigg, S., 2010, Book of Abstracts. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. 2009
  97. Published

    Berechnung von Extrusionsschnecken

    Schuschnigg, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. 2008
  99. Published

    Doppelschneckenextruder

    Schuschnigg, S., 2008, In: Triple m. p. 19-19

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Kunststoffverarbeitung mit dem konisch gleichlaufenden NCT-Extruder

    Schuschnigg, S., 2008, Extrusion am Puls der Zeit. Im Fokus: Energie, Wirtschaftlichkeit und Qualität. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2007
  102. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders

    Schuschnigg, S. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Langecker, G. & Schuschnigg, S., 2007

    Research output: Non-textual form › Web publication/site › Research

  104. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2007, In: VLK-News. 3+4, p. 4-10

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2006
  106. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

    Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

    Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. 2005
  111. Published

    Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

    Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 3511

Latest Research Output

View more (94)