Peter Presoly

1 - 50 out of 64Page size: 50

Publications / Theses

  1. 2024
  2. Published

    Influence of Silicon and Tramp Elements on the High-temperature Oxidation of Steel in Direct Casting and Rolling Processes

    Gaiser, G., Presoly, P., Bernhard, C., Baumgartner, K. & Grosseiber, S., 2024, In: ISIJ international. 64, 9, p. 1439-1449 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2021
  4. Published

    An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

    Bernhard, M. C., Presoly, P., Bernhard, C., Hahn, S. & Ilie, S., Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 2021, June, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Characterization of the γ-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., 6 Mar 2021, In: Materials characterization. 174.2021, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    Evaluation of the Iron Content in Non-Metallic Inclusions in Steel for (Sub)microscopic Steel Cleanness Description

    Mayerhofer, A., Michelic, S. K., Presoly, P. & Bernhard, C., 22 Oct 2020, p. 1-9.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Investigation of Fe–C–Cr and Fe–C–Cr–Ni-based systems with the use of DTA and HT-LSCM methods

    Drozdová, Ľ., Smetana, B., Presoly, P., Novák, V., Machů, M., Bernhard, M., Francová, H., Zlá, S., Řeháčková, L. & Bernhard, C., 1 Oct 2020, In: Journal of Thermal Analysis and Calorimetry. 142, 2, p. 535-546 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

    Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Jul 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 10, p. 5351-5364 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Study on the Possible Error Due to Matrix Interaction in Automated SEM/EDS Analysis of Nonmetallic Inclusions in Steel by Thermodynamics, Kinetics and Electrolytic Extraction

    Mayerhofer, A., You, D., Presoly, P., Bernhard, C. & Michelic, S. K., 29 Jun 2020, In: Metals : open access journal . 10.2020, 7, p. 1-16 16 p., 860.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y.-B., Presoly, P., Gheribi, A. & Bernhard, C., 15 Jun 2020, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70.2020, September, 101795.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 8 Apr 2020, In: Applied Sciences. 10.2020, 7, p. 5249 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2019
  15. Published

    High precious phase diagrams – a roadmap for a successful casting processing

    Presoly, P., Bernhard, M. C., Bernhard, C., Hahn, S., Pennerstorfer, P., Ilie, S. & Six, J., 26 Jun 2019, 4th ESTAD European Steel Technology and Appliciation Days. Steel Institute VDEh, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Minimising the leaching of V and Cr from electric arc furnace slags by decreasing the FeO/SiO2 ratio

    Neuhold, S. F., Höllen, D., Presoly, P., Adamczyk, B., Drissen, P., van Zomeren, A., Schüler, S. & Mudersbach, D., Apr 2019, Proceedings of the 6th Internation Slag Valorisation Symposium: Science, Innovation & Entrepreneurship in Pursuit of a Sustainable World. Malfiet, A., Peys, A. & Di Maria, A. (eds.). Mechelen, Vol. 6. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2018
  20. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sept 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    High concentrations at the final solidification of advanced steels: Thermodynamic evaluation of replicated “segregation-samples” by means of DTA/DSC-measurements

    Presoly, P., Bernhard, M. C., You, D. & Bernhard, C., 3 Sept 2018, Solidification and Gravity VII. p. 138-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Investigation of the Fe-C-Si-Mn system with special focus on the Fe – 3 wt.-% Si – high Mn section

    Presoly, P., Bernhard, M. C. & Bernhard, C., 30 May 2018, CALPHAD XLVII - Conference Program. p. 50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. 2017
  26. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 2017, 4

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2017, In: Welding in the world. 61, p. 423 - 434

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 2017, In: Metals : open access journal . 7, 11, p. 460 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. 2016
  35. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  36. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2015
  40. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2014
  46. Published

    Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis

    Presoly, P., Xia, G., Reisinger, P. & Bernhard, C., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 430-437

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P., 2014

    Research output: Thesis › Doctoral Thesis

  49. 2013
  50. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2012
  52. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Thermische Analyse neuer Stähle

    Presoly, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. 2011
  57. Published

    Charakterisierung peritektischer Stähle: Potential von DSC-Messungen im Bereich der Alpha-Gamma-Umwandlung, sowie im Hochtemperaturbereich, DSC-Messergebnisse der ternären Systeme Fe-C-Si und Fe-C-Al, Auswertung und Vergleich

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Charakterisierung peritektischer Stähle: Reassessment eines quasibinären Schnittes im System Fe-1%Si-C, sowie Vorstellung des finalen Versuchsprogrammes (System Fe-C-X-Y).

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Charakterisierung peritektischer Stähle: Reassessment eines quasibinären Schnittes im System Fe-C-Al, sowie vertiefende extra Untersuchungen, HTLSCM Gefügebetrachtungen als zweite Methode der Fe-C-Al Legierungen, weiters Versuchsprogramm

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. 2010
  62. Published

    Charakterisierung peritektischer Stähle: DTA/DSC-Simulation und Signalkorrektur, Legierungsinstabilität bei DTA-Messungen, DSC-Aufrüstung und Potential von DSC-Messungen

    Presoly, P., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Charakterisierung peritektischer Stähle: Ergebnisse der Dilatometer Methodenentwicklung, Strategie – Legierungssysteme von Interesse & Thermodynamik – Al Variation.

    Presoly, P., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 2253

Latest Research Output

View more (64)