Martin Pletz

1 - 41 out of 41Page size: 50

Publications / Theses

  1. 2021
  2. Published

    Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

    Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2019
  4. Published

    Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

    Nagaraja, S. G., Pletz, M. & Schuecker, C., 15 Dec 2019, In: International journal of solids and structures. 180-181, p. 84-96 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

    Pletz, M., Meyer, K. A., Künstner, D., Scheriau, S. & Daves, W., 15 Oct 2019, In: Wear. 436-437, 202992.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Finite element model to describe crack deflection and constrained micro-cracking

    Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.

    Research output: Contribution to conference › Paper

  7. Published

    Investigation of deformation mechanisms in manganese steel crossings using FE models

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites

    Frankl, S., Pletz, M. & Schuecker, C., 1 Jan 2019, In: Procedia Structural Integrity. 17, p. 51-57 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  10. Published

    Evaluation of crack initiation from pores in layered materials using a coupled stress-energy criterion

    Schuecker, C., Shevchuk, M., Drvoderic, M. & Pletz, M., 2019.

    Research output: Contribution to conference › Abstract › peer-review

  11. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2018
  13. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Aug 2018, In: Wear. 2018, Volumes 414–415, p. 136-150

    Research output: Contribution to journal › Article › Transfer › peer-review

  15. Published

    Calculation of cyclic plastic surface deformations in Rails-quasistatic Fe models

    Pletz, M., Daves, W., Künstner, D. & Scheriau, S., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. p. 784-791 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2017
  17. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Permeability customisation through preform manipulation utilising 3d-printing technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Jan 2017, In: Polymers and Polymer Composites. 25, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Simplified explicit finite element model for the impact of a wheel on a crossing – Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2017, In: Tribology International. 111, p. 254-264 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2017, In: Solid State Phenomena. 258, p. 178-181 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2016
  22. Published

    A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

    Daves, W., Kubin, W., Scheriau, S. & Pletz, M., 15 Nov 2016, In: Wear. 366-367, p. 78-83 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Dynamic Finite Element Model- Impact Force and Contact Pressure for Measured Geometries of Fixed Crossings

    Pletz, M., Ossberger, U., Ossberger, H. & Daves, W., 3 May 2016, The Dynamics of Vehicles on Roads and Tracks - Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics, IAVSD 2015. p. 1337-1346 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    FE Modelle zur indirekten Bestimmung des Reibkoeffizienten im Stauchversuch

    Brunbauer, S., Kaufmann, A. & Pletz, M., 14 Apr 2016, p. 63-69.

    Research output: Contribution to conference › Paper

  25. Published

    A simplified dynamic finite element model for the impact of a wheel on a crossing: Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, H. & Pletz, M., 2016, In: Civil-Comp Proceedings. 110

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications : TTP, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2015
  29. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  30. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  31. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. 2014
  33. Published

    Multi-scale finite element modeling to describe rolling contact fatigue in a wheel-rail test rig

    Pletz, M., Daves, W., Yao, W., Kubin, W. & Scheriau, S., Dec 2014, In: Tribology International. 80, p. 147-155

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites

    Majer, Z., Pletz, M., Krautgasser, C., Nalik, L., Hutar, P. & Bermejo Moratinos, R., 2014, In: Procedia Materials Science. 3, p. 2071-2076

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2013
  38. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

    Kubin, W. K., Pletz, M., Daves, W. & Scheriau, S., 2013, In: Tribology International. 67, p. 132-139

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2012
  41. Published

    A Wheel Passing a Crossing Nose- Dynamic Analysis under High Axle Loads using Finite Element Modelling

    Pletz, M., Daves, W. & Ossberger, H., 10 Oct 2012, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 226, 6, p. 603-611 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    A wheel set/crossing model regarding impact, sliding and deformation-Explicit finite element approach: Wear

    Pletz, M., Daves, W. & Ossberger, H., 2012, In: Wear. 294-295, p. 446-456 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Damage in Railway Crossings - Numerical Models

    Pletz, M., 2012

    Research output: Thesis › Doctoral Thesis

  44. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2011
  46. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2010
  50. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Strength and fracture analysis of silicon chips to be embedded into printed circuit boards

    Deluca, M., Bermejo, R., Pletz, M. & Supancic, P., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Theoretische Untersuchung der Einbettung von keramischen Komponenten in Leiterplatten

    Pletz, M., 2010

    Research output: Thesis › Master's Thesis

View graph of relations

Contact

Phone: 2507

Latest Research Output

View more (41)