Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

Şopu, D., Spieckermann, F., Bian, X., Fellner, S., Wright, J., Cordill, M., Gammer, C., Wang, G., Stoica, M. & Eckert, J., 24 Nov 2023, In: NPG Asia Materials.

Research output: Contribution to journal › Article › Research › peer-review

Short-range order patterns in Mg₆₆Zn₂₉Ca₅ metallic glass: Phase transformations and crystallization kinetics

Naghdali, S., Shabestari, S. G., Saghafian, H., Ramasamy, P., Spieckermann, F., Chen, Z., Zhang, Z. & Eckert, J., 1 Aug 2023, In: Journal of non-crystalline solids. 613, 122390.

Research output: Contribution to journal › Article › Research › peer-review

Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., Feb 2023, In: Materials. 16, 3, 1260.

Research output: Contribution to journal › Article › Research › peer-review

Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy

Xing, Y., Li, C. J., Mu, Y. K., Jia, Y. D., Song, K. K., Tan, J., Wang, G., Zhang, Z. Q., Yi, J. H. & Eckert, J., 1 Jan 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 132, p. 119-131

Research output: Contribution to journal › Article › Research › peer-review

Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass

Rezvan, A., Sharifikolouei, E., Lassnig, A., Soprunyuk, V., Gammer, C., Spieckermann, F., Schranz, W., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Manfredi, M., Eckert, J. & Sarac, B., Dec 2022, In: Materials Today Bio. 16, 100378.

Research output: Contribution to journal › Article › Research › peer-review

Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties

Sharifikolouei, E., Sarac, B., Zheng, Y., Bala, P. & Eckert, J., Dec 2022, In: Scientific Reports. 12, 1, 10784.

Research output: Contribution to journal › Article › Research › peer-review

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E. M., Sommer, N. G., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P. J., Pippan, R. & Weinberg, A. M., Dec 2022, In: npj Materials degradation. 6, 1, 47.

Research output: Contribution to journal › Article › Research › peer-review

Structure-dynamics relationships in cryogenically deformed bulk metallic glass

Spieckermann, F., Şopu, D., Soprunyuk, V., Kerber, M. B., Bednarčík, J., Schökel, A., Rezvan, A., Ketov, S., Sarac, B., Schafler, E. & Eckert, J., Dec 2022, In: Nature Communications. 13, 1, 127.

Research output: Contribution to journal › Article › Research › peer-review

Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallization

Cai, F. F., Sarac, B., Chen, Z., Czibula, C., Spieckermann, F. & Eckert, J., Dec 2022, In: Materials today advances. 16, 100316.

Research output: Contribution to journal › Article › Research › peer-review

New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., Nov 2022, In: Materials and Design. 223, 111139.

Research output: Contribution to journal › Article › Research › peer-review

Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

Lu, S. L., Zhang, Z. J., Liu, R., Zhou, X. H., Wang, X. G., Zhang, B. N., Zhao, X. M., Eckert, J. & Zhang, Z. J., Nov 2022, In: Additive Manufacturing. 59, 103092.

Research output: Contribution to journal › Article › Research › peer-review

Phase formation, thermal stability and crystallization behavior of Cu₄₇Ti₃₃Zr₁₁Ni₈X₁(X = Fe, Si, Sn, Pb) bulk glassy alloys

Calin, M., Stoica, M., Eckert, J., Reza Yavari, A. & Schultz, L., Nov 2022, In: International Journal of Materials Research. 95, 11, p. 970-977 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237, 118191.

Research output: Contribution to journal › Article › Research › peer-review

Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatment

Lu, S. L., Zhang, Z. F., Liu, R., Qu, Z., Wang, B., Zhou, X. H., Eckert, J. & Zhang, Z. F., 5 Sept 2022, In: Journal of alloys and compounds. 914, 165235.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloy

Lucchetta, M. C., Ramasamy, P., Saporiti, F., Eckert, J. & Audebert, F., Sept 2022, In: Results in Engineering. 15, 100506.

Research output: Contribution to journal › Article › Research › peer-review

Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing

Renk, O., Hohenwarter, A., Gammer, C., Eckert, J. & Pippan, R., Aug 2022, In: Scripta Materialia. 217, 114773.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy

He, T., Lu, T., Şopu, D., Han, X., Lu, H., Nielsch, K., Eckert, J., Ciftci, N., Uhlenwinkel, V., Kosiba, K. & Scudino, S., 1 Jul 2022, In: Journal of Materials Science and Technology. 114, p. 42-54 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH₂)₂ for hydrogen storage

Hu, M., Sun, X., Li, B., Li, P., Xiong, M., Tan, J., Ye, Z., Eckert, J., Liang, C. & Pan, H., 25 Jun 2022, In: Journal of alloys and compounds. 907, 164397.

Research output: Contribution to journal › Article › Research › peer-review

Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk Dynamics

Sheng, H., Sopu, D., Fellner, S., Eckert, J. & Gammer, C., 17 Jun 2022, In: Physical review letters. 128, 24, 245501.

Research output: Contribution to journal › Article › Research › peer-review

Molecular dynamics study of fracture and plastic deformation of Cu/Cu₆₄Zr₃₆ crystalline/amorphous composites with a pre-existing void

Wu, W. P., Peng, Z., Şopu, D. & Eckert, J., 15 Jun 2022, In: Journal of non-crystalline solids. 586, 121556.

Research output: Contribution to journal › Article › Research › peer-review

The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Jun 2022, In: Acta Materialia. 232, 117935.

Research output: Contribution to journal › Article › Research › peer-review

Thermoplasticity of metallic glasses: Processing and applications

Sarac, B. & Eckert, J., Jun 2022, In: Progress in materials science. 127, 100941.

Research output: Contribution to journal › Review article › peer-review

Nanomechanical characterization of Ti-base nanostructure-dendrite composite

Alcalá, G., Mato, S., Woodcock, T. G., Eckert, J., Gebert, A., Schultz, L. & Hangen, U., May 2022, In: International Journal of Materials Research. 95, 5, p. 317-319 3 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanomechanical characterization of Ti-base nanostructure-dendrite composite

Alcalá, G., Mato, S., Woodcock, T. G., Eckert, J., Gebert, A., Schultz, L. & Hangen, U., May 2022, In: International Journal of Materials Research. 95, 5, p. 317-319 3 p.

Research output: Contribution to journal › Article › Research › peer-review

Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa

Zadorozhnyy, V., Tomilin, I., Berdonosova, E., Gammer, C., Zadorozhnyy, M., Savvotin, I., Shchetinin, I., Zheleznyi, M., Novikov, A., Bazlov, A., Serov, M., Milovzorov, G., Korol, A., Kato, H., Eckert, J., Kaloshkin, S. & Klyamkin, S., 25 Apr 2022, In: Journal of alloys and compounds. 901, 163638.

Research output: Contribution to journal › Article › Research › peer-review

Maximizing the degree of rejuvenation in metallic glasses

Yuan, X., Şopu, D., Spieckermann, F., Song, K. K., Ketov, S. V., Prashanth, K. G. & Eckert, J., 15 Apr 2022, In: Scripta Materialia. 212, 114575.

Research output: Contribution to journal › Article › Research › peer-review

Deformation-induced medium-range order changes in bulk metallic glasses

Nomoto, K., Li, B., Gammer, C., Ceguerra, A. V., Bilal, H., Hohenwarter, A., Eckert, J., Gludovatz, B., Ringer, S. P. & Kruzic, J. J., Apr 2022, In: Physical review materials . 6, 4, 043603.

Research output: Contribution to journal › Article › Research › peer-review

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

Zhang, Z. Q., Ketov, S. V., Fellner, S., Sheng, H. P., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., Apr 2022, In: Materials and Design. 216, 110530.

Research output: Contribution to journal › Article › Research › peer-review

Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

Yuan, X., Şopu, D., Song, K. & Eckert, J., 1 Mar 2022, In: Materials. 15, 5, 1702.

Research output: Contribution to journal › Article › Research › peer-review

Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance

Wang, P., Yu, S., Shergill, J., Chaubey, A., Eckert, J., Prashanth, K. G. & Scudino, S., Mar 2022, In: Acta metallurgica Sinica (English letters). 35, 3, p. 389-396

Research output: Contribution to journal › Article › Research › peer-review

Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co₅₀Fe₂₅Ta₅Si₅C₁₅ glassy powders with high thermal stability

Taghvaei, A. H., Nickjeh, H. S., Ramasamy, P. & Eckert, J., 15 Feb 2022, In: Journal of alloys and compounds. 894, 162509.

Research output: Contribution to journal › Article › Research › peer-review

Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO₂ with interface-controlled ion transport for efficient hydrogen storage

Sarac, B., Ivanov, Y. P., Karazehir, T., Mühlbacher, M., Sarac, A. S., Greer, A. L. & Eckert, J., 1 Feb 2022, In: International Journal of Hydrogen Energy . 47, 10, p. 6777-6788 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

Dong, Q., Tan, J., Huang, R., Wang, H. L., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb 2022, In: Intermetallics. 141, 107411.

Research output: Contribution to journal › Article › Research › peer-review

Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groups

Sarac, B., Karazehir, T., Gilsing, H. D., Eckert, J. & Sarac, A. S., 31 Jan 2022, In: Molecular Systems Design and Engineering. 7, 5, p. 460-479 20 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses

Malekan, M., Rashidi, R., Shabestari, S. G. & Eckert, J., 15 Jan 2022, In: Journal of non-crystalline solids. 576, 121266.

Research output: Contribution to journal › Article › Research › peer-review

Annealing metallic glasses above T_g in order to accelerate the relaxation process in molecular dynamics simulations

Sopu, D., Yuan, X. & Eckert, J., 3 Jan 2022, In: Applied physics letters. 120, 1, 011904.

Research output: Contribution to journal › Article › Research › peer-review

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Rong, Z., Yi, J., Li, F., Liu, Y. & Eckert, J., 2022, In: Materials Research Express. 9, 4, 045601.

Research output: Contribution to journal › Article › Research › peer-review

Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses

Jana, P. P., Eckert, J. & Das, J., Dec 2021, In: Thermochimica Acta. 706, 179071.

Research output: Contribution to journal › Article › Research › peer-review

Transition metal-based high entropy alloy microfiber electrodes: Corrosion behavior and hydrogen activity

Sarac, B., Zadorozhnyy, V., Ivanov, Y. P., Spieckermann, F., Klyamkin, S., Berdonosova, E., Serov, M., Kaloshkin, S., Greer, A. L., Sarac, A. S. & Eckert, J., Dec 2021, In: Corrosion science. 193, 109880.

Research output: Contribution to journal › Article › Research › peer-review

Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 15 Nov 2021, In: Materials and Design. 210, 110099.

Research output: Contribution to journal › Article › Research › peer-review

Role of effective strain on the deformability of brittle Hf-based bulk metallic glass

Kim, S. Y., Park, E. S., Eckert, J. & Lee, M. H., 1 Nov 2021, In: Journal of Materials Research and Technology. 15, p. 6713-6720 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Wear behavior of a heat-treatable al-3.5cu-1.5 mg-1Si alloy manufactured by selective laser melting

Wang, P., Lei, Y., Qi, J. F., Yu, S. J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14, 22, 7048.

Research output: Contribution to journal › Article › Research › peer-review

Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

Renk, O., Enzinger, R., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., Nov 2021, In: Physical review materials . 5, 11, 113609.

Research output: Contribution to journal › Article › Research › peer-review

Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

Akbaripanah, F., Sabbaghian, M., Fakhar, N., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 5 Oct 2021, In: Materials Science and Engineering A. 826, 141916.

Research output: Contribution to journal › Article › Research › peer-review

High-entropy eutectic composites with high strength and low Young's modulus

Maity, T., Prashanth, K. G., Balcı, Ö., Cieślak, G., Spychalski, M., Kulik, T. & Eckert, J., Oct 2021, In: Material Design and Processing Communications. 3, 5, e211.

Research output: Contribution to journal › Article › Research › peer-review

Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass

Sarac, B., Ivanov, Y. P., Micusik, M., Karazehir, T., Putz, B., Dancette, S., Omastova, M., Greer, A. L., Sarac, A. S. & Eckert, J., 15 Sept 2021, In: ACS Applied Materials and Interfaces. 13, 36, p. 42613-42623 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys

Xi, L., Guo, S., Ding, K., Prashanth, K. G., Sarac, B. & Eckert, J., Sept 2021, In: Vacuum. 191, 110405.

Research output: Contribution to journal › Article › Research › peer-review

Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization

Sarac, B., Kim, J. T., Ivanov, Y. P., Soprunyuk, V., Ketov, S. V., Schranz, W., Hong, S. H., Kim, K. B., Greer, A. L. & Eckert, J., 27 Aug 2021, In: ACS Applied Nano Materials. 4, 8, p. 7771-7780 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Effects of Ni and Co alloying on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons

Yüce, E., Sarac, B., Ketov, S., Reissner, M. & Eckert, J., 15 Aug 2021, In: Journal of alloys and compounds. 872, 159620.

Research output: Contribution to journal › Article › Research › peer-review

Structural homology of the strength for metallic glasses

Yang, W., Sun, X., Liu, H., Yu, C., Li, W., Inoue, A., Şopu, D., Eckert, J. & Tang, C., 10 Aug 2021, In: Journal of Materials Science and Technology. 81, p. 123-130 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density

Ketov, S. V., Ivanov, Y. P., Putz, B., Zhang, Z., Eckert, J. & Greer, A. L., 1 Aug 2021, In: Acta Materialia. 214, 116993.

Research output: Contribution to journal › Article › Research › peer-review

Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode

Karazehir, T., Sarac, B., Gilsing, H. D., Eckert, J. & Sarac, A. S., Aug 2021, In: Journal of the Electrochemical Society. 168, 8, 086503.

Research output: Contribution to journal › Article › Research › peer-review

First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl₂

Tang, M., Rong, Z. C., Li, F. X., Yi, J. H., Eckert, J. & Liu, Y. C., Aug 2021, In: Computational & theoretical chemistry. 1202, 113304.

Research output: Contribution to journal › Article › Research › peer-review

Mechanochemical synthesis of rosin-modified montmorillonite: A breakthrough approach to the next generation of ommt/rubber nanocomposites

Esmaeili, E., Rounaghi, S. A. & Eckert, J., Aug 2021, In: Nanomaterials. 11, 8, 1974.

Research output: Contribution to journal › Article › Research › peer-review

Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite

Gammer, C., Rentenberger, C., Beitelschmidt, D., Minor, A. M. & Eckert, J., 9 Jul 2021, In: Materials and Design. 209.2021, 1 November, 6 p., 109970.

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing of Aluminum-Based Metal Matrix Composites—A Review

Tang, S., Ummethala, R., Suryanarayana, C., Eckert, J., Prashanth, K. G. & Wang, Z., Jul 2021, In: Advanced Engineering Materials. 23, 7, 2100053.

Research output: Contribution to journal › Review article › peer-review

First-Principles Study of the Intrinsic Properties of the fcc/hcp-Ti Boundary in Carbon Nanotube/Ti Composites Prepared by High-Pressure Torsion

Rong, Z., Hao, P., Tang, M., Chen, P., Li, F., Yi, J., Şopu, D., Eckert, J. & Liu, Y., Jul 2021, In: Physica Status Solidi (B) Basic Research. 258, 7, 2100093.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical spectroscopy of metal/polymer composite membranes for hydrogen separation

Zadorozhnyy, V., Soprunyuk, V., Klyamkin, S., Zadorozhnyy, M., Berdonosova, E., Savvotin, I., Stepashkin, A., Korol, A., Kvaratskheliya, A., Semenov, D., Eckert, J. & Kaloshkin, S. D., 15 Jun 2021, In: Journal of alloys and compounds. 866, 159014.

Research output: Contribution to journal › Article › Research › peer-review

Electrospun polyacrylonitrile/2-(acryloyloxy)ethyl ferrocenecarboxylate polymer blend nanofibers

Gumrukcu, S., Soprunyuk, V., Sarac, B., Yüce, E., Eckert, J. & Sarac, A. S., 1 Jun 2021, In: Molecular systems design & engineering . 6, 6, p. 476-492 17 p.

Research output: Contribution to journal › Article › Research › peer-review

Static coarsening behavior of equiaxed α phase in Ti−8Al−1Mo−1V alloy

SHI, X. H., CAO, Z. H., FAN, Z. Y., ECKERT, J. & QIAO, J. W., Jun 2021, In: Transactions of Nonferrous Metals Society of China (English Edition). 31, 6, p. 1628-1640 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Origin of Electrocatalytic Activity in Amorphous Nickel-Metalloid Electrodeposits

Sarac, B., Karazehir, T., Micusik, M., Halkali, C., Gutnik, D., Omastova, M., Sarac, A. S. & Eckert, J., 26 May 2021, In: ACS Applied Materials and Interfaces. 13, 20, p. 23689-23701 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Atomistic understanding of creep and relaxation mechanisms of Cu₆₄Zr₃₆ metallic glass at different temperatures and stress levels

Wu, W. P., Şopu, D., Yuan, X., Adjaoud, O., Song, K. K. & Eckert, J., 1 May 2021, In: Journal of non-crystalline solids. 559, 120676.

Research output: Contribution to journal › Article › Research › peer-review

Effect of high pressure torsion on crystallization and magnetic properties of Fe_73.9Cu₁Nb₃Si_15.5B_6.6

Antoni, M., Spieckermann, F., Soprunyuk, V., Chawake, N., Sarac, B., Zálešák, J., Polak, C., Gammer, C., Pippan, R., Zehetbauer, M. & Eckert, J., 1 May 2021, In: Journal of magnetism and magnetic materials. 525.2021, 1 May, 6 p., 167679.

Research output: Contribution to journal › Article › Research › peer-review

Origin of strain hardening in monolithic metallic glasses

Yuan, X., Şopu, D. & Eckert, J., 29 Apr 2021, In: Physical Review B. 103, 14, L140107.

Research output: Contribution to journal › Article › Research › peer-review

A universal criterion for the failure threshold in slowly sheared bulk metallic glasses

Luo, Y. S., Wang, Z., Eckert, J. & Qiao, J. W., 21 Apr 2021, In: Journal of applied physics. 129, 15, 155109.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure refinement and enhanced tensile properties of Al-11Mg₂Si alloy modified by erbium

Wang, K. Y., Xiang, J., Zhao, R. D., Bi, J. L., Wu, X. F., Chen, M. H., Wu, F. F. & Eckert, J., 15 Apr 2021, In: Journal of alloys and compounds. 860, 158421.

Research output: Contribution to journal › Article › Research › peer-review

Medium-range order dictates local hardness in bulk metallic glasses

Nomoto, K., Ceguerra, A. V., Gammer, C., Li, B., Bilal, H., Hohenwarter, A., Gludovatz, B., Eckert, J., Ringer, S. P. & Kruzic, J. J., Apr 2021, In: Materials today. 44, p. 48-57 10 p.

Research output: Contribution to journal › Article › Research › peer-review

退火处理对激光选区激光熔化成形 Ti-6Al-4V 合金的显微组织和力学性能影响

Wang, P., Chen, F. H., Eckert, J., Pilz, S., Scudino, S. & Prashanth, K. G., Apr 2021, In: Journal of Central South University = Zhongnan-Daxue-xuebao : yingwen-ban. 28, 4, p. 1068-1077 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoporous Pd-Cu-Si Amorphous Thin Films for Electrochemical Hydrogen Storage and Sensing

Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 22 Mar 2021, In: ACS Applied Energy Materials. 4, 3, p. 2672-2680 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Functionalized highly electron-rich redox-active electropolymerized 3,4-propylenedioxythiophenes as precursors and targets for bioelectronics and supercapacitors

Karazehir, T., Sarac, B., Gilsing, H. D., Gumrukcu, S., Eckert, J. & Sarac, A. S., 1 Mar 2021, In: Molecular systems design & engineering . 6, 3, p. 214-233 20 p.

Research output: Contribution to journal › Article › Research › peer-review

From elastic excitations to macroscopic plasticity in metallic glasses

Şopu, D., Yuan, X., Moitzi, F., Spieckermann, F., Bian, X. & Eckert, J., Mar 2021, In: Applied materials today. 22, 100958.

Research output: Contribution to journal › Article › Research › peer-review

Correlation between internal states and creep resistance in metallic glass thin films

Li, M., Tan, J., Qin, X. M., Lu, D. H., Feng, Z. X., Li, C. J., Ketov, S. V., Calin, M. & Eckert, J., 28 Feb 2021, In: Journal of applied physics. 129, 8, 085302.

Research output: Contribution to journal › Article › Research › peer-review

Negative strain rate sensitivity of a Ti-8Al-1Mo-1V alloy with bimodal microstructure under quasi-static compression

Shi, X. H., Fan, Z. Y., Cao, Z. H., Qiao, J. W. & Eckert, J., 1 Feb 2021, In: Materials letters. 284, 128942.

Research output: Contribution to journal › Article › Research › peer-review

X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass

Stoica, M., Sarac, B., Spieckermann, F., Wright, J., Gammer, C., Han, J., Gostin, P. F., Eckert, J. & Löffler, J. F., 29 Jan 2021, In: ACS nano.

Research output: Contribution to journal › Article › Research › peer-review

How the interface type manipulates the thermochemanical response of nanostructured metals: A case study on nickel: A case study on nickel

Renk, O., Maier-Kiener, V., Motz, C., Eckert, J., Kiener, D. & Pippan, R., 24 Jan 2021, In: Materialia. 15.2021, 101020, 13 p., 101020.

Research output: Contribution to journal › Article › Research › peer-review

Erratum: Observation of Exceptionally Strong Binding of Molecular Hydrogen in a Porous Material: Formation of an ²-H₂Complex in a Cu-Exchanged ZSM-5 Zeolite (Journal American Chemical Society (2007) 129:26 (8086-8087) DOI: 10.1021/ja072240l)

Georgiev, P. A., Albinati, A., Mojet, B. L., Ollivier, J. & Eckert, J., 20 Jan 2021, In: Journal of the American Chemical Society. 143, 2, p. 1247 1 p.

Research output: Contribution to journal › Comment/debate › peer-review

Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrous membranes

Gürbüz, R., Sarac, B., Soprunyuk, V., Yüce, E., Eckert, J., Ozcan, A. & Sarac, A. S., Jan 2021, In: Polymers for Advanced Technologies. 32, 1, p. 248-261 14 p.

Research output: Contribution to journal › Article › Research › peer-review

In situ TEM observation of phase transformation in bulk metallic glass composites

Sheng, H., Zhang, L., Zhang, H., Wang, J., Eckert, J. & Gammer, C., 2021, In: Materials Research Letters. 9, 4, p. 190-195 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Molecular dynamics study of the nanoindentation behavior of cu₆₄zr₃₆/cu amorphous/crystalline nanolaminate composites

Wu, W. P., Şopu, D. & Eckert, J., 2021, In: Materials. 14, 11, 2756.

Research output: Contribution to journal › Article › Research › peer-review

Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., 2021, In: Materials Today Communications. 2021, 28, p. 1-11

Research output: Contribution to journal › Article › Research › peer-review

Synthesis of bulk reactive Ni-Al composites using high pressure torsion

Renk, O., Tkadletz, M., Kostoglou, N., Gunduz, I. E., Fezzaa, K., Sun, T., Stark, A., Doumanidis, C. C., Eckert, J., Pippan, R., Mitterer, C. & Rebholz, C., 2021, In: Journal of alloys and compounds. 2021, 857, p. 1-11 157503.

Research output: Contribution to journal › Article › Research › peer-review

Signature of local stress states in the deformation behavior of metallic glasses

Bian, X., Şopu, D., Wang, G., Sun, B., Bednarčik, J., Gammer, C., Zhai, Q. & Eckert, J., 1 Dec 2020, In: NPG Asia Materials. 12, 1, 59.

Research output: Contribution to journal › Article › Research › peer-review

Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects

Singh, N., Hameed, P., Ummethala, R., Manivasagam, G., Prashanth, K. G. & Eckert, J., Dec 2020, In: Materials today advances. 8, 100097.

Research output: Contribution to journal › Review article › peer-review

Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy

Ummethala, R., Karamched, P. S., Rathinavelu, S., Singh, N., Aggarwal, A., Sun, K., Ivanov, E., Kollo, L., Okulov, I., Eckert, J. & Prashanth, K. G., Dec 2020, In: Materialia. 14, 100941.

Research output: Contribution to journal › Article › Research › peer-review

Phase transformation, thermal behavior and magnetic study of new Co_80-xTa_xSi₅C₁₅ (x = 0, 5) glassy/nanocrystalline alloys prepared by mechanical alloying

Nickjeh, H. S., Taghvaei, A. H., Ramasamy, P. & Eckert, J., 30 Nov 2020, In: Journal of alloys and compounds. 843, 155913.

Research output: Contribution to journal › Article › Research › peer-review

Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms

Sarac, B., Karazehir, T., Ivanov, Y. P., Putz, B., Greer, A. L., Sarac, A. S. & Eckert, J., 28 Nov 2020, In: Nanoscale. 12.2020, 44, p. 22586-22595 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Additive manufacturing of a martensitic Co–Cr–Mo alloy: Towards circumventing the strength–ductility trade-off

Wang, Z., Tang, S. Y., Scudino, S., Ivanov, Y. P., Qu, R. T., Wang, D., Yang, C., Zhang, W. W., Greer, A. L., Eckert, J. & Prashanth, K. G., 19 Nov 2020, In: Additive Manufacturing. 37.2021, January, 14 p., 101725.

Research output: Contribution to journal › Article › Research › peer-review

In situ high-energy X-ray diffraction study of thermally-activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites

Song, K., Wu, S., Kaban, I., Stoica, M., Bednarčík, J., Sun, B., Cao, C., Wang, G., Wang, L. & Eckert, J., 15 Nov 2020, In: Journal of alloys and compounds. 2020, 841, 155781.

Research output: Contribution to journal › Article › Research › peer-review

Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

Rezvan, A., Sarac, B., Soprunyuk, V., Spieckermann, F., Gammer, C., Sheng, H., Sifferlinger, N. A. & Eckert, J., 11 Nov 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 52.2021, 1, p. 8-13 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Stress-strain behavior and microstructural evolution of ultra-high carbon Fe-C-Cr-V-Mo steel subjected to hot deformation

Wang, R., Zhang, W., Li, Y., Li, D., Kang, Y., Yang, X., Eckert, J. & Yan, Z., 5 Nov 2020, (E-pub ahead of print) In: Materials characterization. 110746.

Research output: Contribution to journal › Article › Research › peer-review

Origin of structural heterogeneity in Zr-Co-Al metallic glasses from the point of view of liquid structures

Zhang, H., Sun, H., Pan, S., Şopu, D., Peng, C., Zhao, K., Song, K., Yuan, S., Qiao, J., Wang, L. & Eckert, J., 21 Oct 2020, In: Journal of non-crystalline solids. 553.2021, 1 February, 12 p., 120501.

Research output: Contribution to journal › Article › Research › peer-review

Correlation between the crystallized structure of Mg₆₇Zn₂₈Ca₅ amorphous alloy and the corrosion behavior in simulated body fluid

Chen, B., Wang, D., Zhang, L., Geng, G., Yan, Z. & Eckert, J., 20 Oct 2020, In: Journal of non-crystalline solids. 553.2021, 1 February, 7 p., 120473.

Research output: Contribution to journal › Article › Research › peer-review

Selective Laser Melting of Aluminum and Its Alloys

Wang, Z., Ummethala, R., Singh, N., Tang, S., Suryanarayana, C., Eckert, J. & Prashanth, K. G., 14 Oct 2020, In: Materials. 13.2020, 20, p. 1-67 67 p., 4564.

Research output: Contribution to journal › Article › Research › peer-review

Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu₄₆Zr₄₆Al₈ bulk metallic glass

Rezvan, A., Sarac, B., Soprunyuk, V., Kim, J. T., Song, K. K., Li, C., Schranz, W. T. & Eckert, J., 6 Oct 2020, In: Intermetallics. 127.2020, December, 106986.

Research output: Contribution to journal › Article › Research › peer-review

An atomic-level perspective of shear band formation and interaction in monolithic metallic glasses

Şopu, D., Moitzi, F., Mousseau, N. & Eckert, J., 30 Sept 2020, In: Applied materials today. 21.2020, December, 6 p., 100828.

Research output: Contribution to journal › Article › Research › peer-review

Intrinsic and extrinsic effects on the brittle-to-ductile transition in metallic glasses

Yuan, X., Şopu, D., Moitzi, F., Song, K. K. & Eckert, J., 28 Sept 2020, In: Journal of applied physics. 128, 12, 125102.

Research output: Contribution to journal › Article › Research › peer-review

Composite of medium entropy alloys synthesized using spark plasma sintering

Chawake, N., Raman, L., Ramasamy, P., Ghosh, P., Spieckermann, F., Gammer, C., Murty, B. S., Kottada, R. S. & Eckert, J., 16 Sept 2020, In: Scripta Materialia. 191.2021, 15 January, p. 46-51 6 p.

Research output: Contribution to journal › Article › Research › peer-review

The role of crystallographic texture on mechanically induced grain boundary migration

Renk, O., Ghosh, P., Sabat, R. K., Eckert, J. & Pippan, R., 9 Sept 2020, (E-pub ahead of print) In: Acta Materialia. 200.2020, November, p. 404-416 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermal expansion behavior of Al–xSi alloys fabricated using selective laser melting

Jia, Y. D., Zhang, L. B., Ma, P., Scudino, S., Wang, G., Yi, J., Eckert, J. & Prashanth, K. G., 1 Sept 2020, In: Progress in additive manufacturing . 5, 3, p. 247-257 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Aspect ratio-dependent nanoindentation behavior of Cu₆₄Zr₃₆metallic glass nanopillars investigated by molecular dynamics simulations

Wu, W. P., Sopu, D., Yuan, X. & Eckert, J., 31 Aug 2020, In: Journal of applied physics. 128.2020, 8, 084303.

Research output: Contribution to journal › Article › Research › peer-review

Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

Xu, Z. Y., Li, C. J., Wang, Z., Fang, D., Gao, P., Tao, J. M., Yi, J. H. & Eckert, J., 20 Aug 2020, In: Materials Science and Engineering A. 796.2020, 7 October, 7 p., 140067.

Research output: Contribution to journal › Article › Research › peer-review

Surface-governed electrochemical hydrogenation in FeNi-based metallic glass

Sarac, B., Zadorozhnyy, V., Ivanov, Y. P., Kvaratskheliya, A., Ketov, S., Karazehir, T., Gumrukcu, S., Berdonosova, E., Zadorozhnyy, M., Micusik, M., Omastova, M., Sarac, A. S., Greer, A. L. & Eckert, J., 15 Aug 2020, In: Journal of power sources. 475.2020, 9 p., 228700.

Research output: Contribution to journal › Article › Research › peer-review

A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting

WANG, P., ECKERT, J., PRASHANTH, K. G., WU, M. W., KABAN, I., XI, L. X. & SCUDINO, S., Aug 2020, In: Transactions of Nonferrous Metals Society of China (English Edition). 30, 8, p. 2001-2034 34 p.

Research output: Contribution to journal › Article › Research › peer-review

Cluster-related phenomena in the properties and transformations of transition metal-based glassy alloys

Lovas, A., Ramasamy, P., Szabó, A., Kováč, J., Novák, L. & Eckert, J., Aug 2020, In: Metals. 10, 8, p. 1-46 46 p., 1025.

Research output: Contribution to journal › Review article › peer-review

Selective laser melting of nanostructured Al-Y-Ni-Co alloy

Wang, Z., Scudino, S., Eckert, J. & Prashanth, K. G., Aug 2020, In: Manufacturing Letters. 25, p. 21-25 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Surface functionalization of biomedical Ti-6Al-7Nb alloy by liquid metal dealloying

Okulov, I. V., Joo, S. H., Okulov, A. V., Volegov, A. S., Luthringer, B., Willumeit-Römer, R., Zhang, L., Mädler, L., Eckert, J. & Kato, H., Aug 2020, In: Nanomaterials. 10, 8, p. 1-12 12 p., 1479.

Research output: Contribution to journal › Article › Research › peer-review

Cooperative Shear in Bulk Metallic Glass Composites Containing Metastable β-Ti Dendrites

Zhang, L., Narayan, R. L., Sun, B. A., Yan, T. Y., Ramamurty, U., Eckert, J. & Zhang, H. F., 31 Jul 2020, In: Physical review letters. 125, 5, 055501.

Research output: Contribution to journal › Article › Research › peer-review

Fabrication and characterization of novel soft magnetic [(Fe_0.7Co_0.3)_71.2B₂₄Y_4.8]₉₆Nb₄/V₂O₅ bulk metallic glassy/composite cores with excellent magnetic permeability and low core losses

Taghvaei, A. H., Mazaleyrat, F. & Eckert, J., 21 Jul 2020, In: Journal of alloys and compounds. 846.2020, 11 p., 156427.

Research output: Contribution to journal › Article › Research › peer-review

Mg-based metallic glass-polymer composites: Investigation of structure, thermal properties, and biocompatibility

Sharma, A., Kopylov, A., Zadorozhnyy, M., Stepashkin, A., Kudelkina, V., Wang, J. Q., Ketov, S., Churyukanova, M., Louzguine-Luzgin, D., Sarac, B., Eckert, J., Kaloshkin, S., Zadorozhnyy, V. & Kato, H., Jul 2020, In: Metals. 10, 7, p. 1-14 14 p., 867.

Research output: Contribution to journal › Article › Research › peer-review

Structural and phase evolution upon annealing of Fe₇₆ Si_9−x B₁₀ P₅ Mo_x (X = 0, 1, 2 and 3) alloys

Perea, D., Parra, C., Ramasamy, P., Stoica, M., Eckert, J., Bolívar, F. & Echeverría, F., Jul 2020, In: Metals. 10, 7, p. 1-11 11 p., 881.

Research output: Contribution to journal › Article › Research › peer-review

Hydrogen storage performance of the multi-principal-component CoFeMnTiVZr alloy in electrochemical and gas-solid reactions

Sarac, B., Zadorozhnyy, V., Berdonosova, E., Ivanov, Y. P., Klyamkin, S., Gumrukcu, S., Sarac, A. S., Korol, A., Semenov, D., Zadorozhnyy, M., Sharma, A., Greer, A. L. & Eckert, J., 29 Jun 2020, In: RSC Advances. 10, 41, p. 24613-24623 11 p.

Research output: Contribution to journal › Article › Research › peer-review

New Mg-Ca-Zn amorphous alloys: Biocompatibility, wettability and mechanical properties

Paul, S., Ramasamy, P., Das, M., Mandal, D., Renk, O., Calin, M., Eckert, J. & Bera, S., 18 Jun 2020, In: Materialia. 12.2020, August, 10 p., 100799.

Research output: Contribution to journal › Article › Research › peer-review

Non-isothermal crystallization kinetics of a Fe–Cr–Mo–B–C amorphous powder

Dong, Q., Song, P., Tan, J., Qin, X. M., Li, C. J., Gao, P., Feng, Z. X., Calin, M. & Eckert, J., 15 May 2020, In: Journal of alloys and compounds. 823.2020, 12 p., 153783.

Research output: Contribution to journal › Article › Research › peer-review

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Yan, Z., Liu, K. & Eckert, J., 6 May 2020, In: Materials Science and Engineering A. 787.2020, 10 June, 8 p., 139520.

Research output: Contribution to journal › Article › Research › peer-review

High pressure torsion induced lowering of Young's modulus in high strength TNZT alloy for bio-implant applications

Maity, T., Balcı, Gammer, C., Ivanov, E., Eckert, J. & Prashanth, K. G., 4 May 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 108.2020, August, 10 p., 103839.

Research output: Contribution to journal › Article › Research › peer-review

Metallic Glass Films with Nanostructured Periodic Density Fluctuations Supported on Si/SiO₂ as an Efficient Hydrogen Sorber

Sarac, B., Ivanov, Y. P., Karazehir, T., Putz, B., Greer, A. L., Sarac, A. S. & Eckert, J., 24 Apr 2020, In: Chemistry - A European Journal. 26.2020, 37, p. 8244-8253 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Premature failure of an additively manufactured material

Wang, Z., Xie, M., Li, Y., Zhang, W., Yang, C., Kollo, L., Eckert, J. & Prashanth, K. G., 24 Apr 2020, In: NPG Asia Materials. 12, 1, 30.

Research output: Contribution to journal › Article › Research › peer-review

New para-magnetic (CoFeNi)₅₀(CrMo)_{50- x}(CB)_x (x = 20, 25, 30) non-equiatomic high entropy metallic glasses with wide supercooled liquid region and excellent mechanical properties

Kim, J. T., Hong, S. H., Park, J. M., Eckert, J. & Kim, K. B., 15 Apr 2020, In: Journal of Materials Science and Technology. 43.2020, 15 April, p. 135-143 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In: Materials Science and Engineering A. 780.2020, 7 April, 7 p., 139182.

Research output: Contribution to journal › Article › Research › peer-review

Stability, elasticity and electronic structures of Co-Zr binary intermetallic compounds

Li, K. R., Lu, W. F., Li, C. J., Şopu, D., Sarac, B., Yi, J. H., Tan, J., Gao, P. & Eckert, J., 2 Apr 2020, In: Philosophical magazine. 100.2020, 7, p. 874-893 20 p.

Research output: Contribution to journal › Article › Research › peer-review

Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite

Fan, J., Rao, W., Qiao, J., Liaw, P. K., Şopu, D., Kiener, D., Eckert, J., Kang, G. & Wu, Y., 19 Mar 2020, In: Journal of Materials Science and Technology. 50.2020, August, p. 192-203 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Atomic-scale origin of shear band multiplication in heterogeneous metallic glasses

Şopu, D., Scudino, S., Bian, X. L., Gammer, C. & Eckert, J., 15 Mar 2020, In: Scripta Materialia. 178.2020, March, p. 57-61 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Soft Ferromagnetic Bulk Metallic Glass with Potential Self-Healing Ability

Ramasamy, P., Stoica, M., Ababei, G., Lupu, N. & Eckert, J., 14 Mar 2020, In: Materials. 13.2020, 6, 8 p., 1319.

Research output: Contribution to journal › Article › Research › peer-review

Strain perceptibility of elements on the diffusion in Zr-based amorphous alloys

Lee, A. Y., Kim, S. Y., Jang, H., Kim, Y. D., Spieckermann, F., Wilde, G., Eckert, J. & Lee, M. H., 12 Mar 2020, In: Scientific Reports. 10, 1, 4575.

Research output: Contribution to journal › Article › Research › peer-review

Metal flow behavior of P/M connecting rod preform in flashless forging based on isothermal compression and numerical simulation

Li, F., Chen, P., Han, J., Deng, L., Yi, J., Liu, Y. & Eckert, J., 1 Mar 2020, In: Journal of Materials Research and Technology. 9.2020, 2, p. 1200-1209 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Synthesis and characterization of novel mesoporous strontium-modified bioactive glass nanospheres for bone tissue engineering applications

Taghvaei, A. H., Danaeifar, F., Gammer, C., Eckert, J., Khosravimelal, S. & Gholipourmalekabadi, M., 1 Mar 2020, In: Microporous and Mesoporous Materials. 294, 109889.

Research output: Contribution to journal › Article › Research › peer-review

Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al₃Ni composites by Cu addition

Kim, J. T., Soprunyuk, V., Chawake, N., Zheng, Y. H., Spieckermann, F., Hong, S. H., Kim, K. B. & Eckert, J., 25 Feb 2020, In: Composites Part B: Engineering. 189.2020, 15 May, 14 p., 107891.

Research output: Contribution to journal › Article › Research › peer-review

Evaluation of hydrogen storage performance of ZrTiVNiCrFe in electrochemical and gas-solid reactions

Zadorozhnyy, V., Sarac, B., Berdonosova, E., Karazehir, T., Lassnig, A., Gammer, C., Zadorozhnyy, M., Ketov, S., Klyamkin, S. & Eckert, J., 14 Feb 2020, In: International Journal of Hydrogen Energy . 45.2020, 8, p. 5347-5355 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Chemical bonding effects on the brittle-to-ductile transition in metallic glasses

Moitzi, F., Şopu, D., Holec, D., Perera, D., Mousseau, N. & Eckert, J., 10 Feb 2020, In: Acta Materialia. 188.2020, 15 April, p. 273-281 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In: Materials Science and Engineering A. 773.2020, 31 January, 9 p., 138848.

Research output: Contribution to journal › Article › Research › peer-review

Development and characterization of new Co–Fe–Hf–B bulk metallic glass with high thermal stability and superior soft magnetic performance

Taghvaei, A. H. & Eckert, J., 17 Jan 2020, In: Journal of alloys and compounds. 823.2020, 8 p., 153890.

Research output: Contribution to journal › Article › Research › peer-review

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, In: Materials Science and Engineering A. 771, 138630.

Research output: Contribution to journal › Article › Research › peer-review

Microstructures, Mechanical Properties, and Corrosion Behaviors of Refractory High-Entropy ReTaWNbMo Alloys

Yan, D., Song, K., Sun, H., Wu, S., Zhao, K., Zhang, H., Yuan, S., Kim, J. T., Chawake, N., Renk, O., Hohenwarter, A., Wang, L. & Eckert, J., 2 Jan 2020, In: Journal of Materials Engineering and Performance. 29.2020, 1, p. 399-409 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Anisotropic elastic and thermodynamic properties of the HCP-Titanium and the FCC-Titanium structure under different pressures

Hao, P. D., Chen, P., Deng, L., Li, F. X., Yi, J. H., Şopu, D., Eckert, J., Tao, J. M., Liu, Y. C. & Bao, R., 1 Jan 2020, In: Journal of Materials Research and Technology. 9, 3, p. 3488-3501 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Fabrication of Metastable Crystalline Nanocomposites by Flash Annealing of Cu47.5Zr47.5Al5 Metallic Glass Using Joule Heating

Okulov, I., Soldatov, I., Kaban, I., Sarac, B., Spieckermann, F. & Eckert, J., 1 Jan 2020, In: Nanomaterials. 10.2020, 1, 84.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting

Wang, P., Lao, C. S., Chen, Z. W., Liu, Y. K., Wang, H., Wendrock, H., Eckert, J. & Scudino, S., 1 Jan 2020, In: Journal of Materials Science and Technology. 36, p. 18-26 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Novel α + β type Ti-Fe-Cu alloys containing sn with pertinent mechanical properties

Zadorozhnyy, V., Ketov, S. V., Wada, T., Wurster, S., Nayak, V., Louzguine-luzgin, D. V., Eckert, J. & Kato, H., 1 Jan 2020, In: Metals. 10.2020, 1, 12 p., 34.

Research output: Contribution to journal › Article › Research › peer-review

Electrocatalytic Behavior of Hydrogenated Pd-Metallic Glass Nanofilms: Butler-Volmer, Tafel and Impedance Analyses

Sarac, B., Karazehir, T., Mühlbacher, M., Sarac Sezai, A. & Eckert, J., 2020, In: Electrocatalysis. 11, 94

Research output: Contribution to journal › Article › Research › peer-review

Microstructural characterization of medium entropy alloy thin films

Chawake, N., Zalesak, J., Gammer, C., Franz, R., Cordill, M. J., Kim, J. T. & Eckert, J., 2020, In: Scripta materialia. p. 22-26

Research output: Contribution to journal › Article › Research › peer-review

Oligoether Ester-Functionalized ProDOT Copolymers on Si/Monolayer Graphene as Capacitive Thin Film Electrodes

Karazehir, T., Sarac, B., Gilsing, H.-D., Eckert, J. & Sarac, A. S., 2020, In: Journal of the Electrochemical Society. 167

Research output: Contribution to journal › Article › Research › peer-review

Structural and Phase Evolution upon Annealing of Fe₇₆Si_9-xB₁₀P₅Mo_x (x: 0,1,2 and 3) Alloys

Perea, D., Parr, C., Ramasamy, P., Stoica, M. & Eckert, J., 2020, In: Metals. 10, 881

Research output: Contribution to journal › Article › Research › peer-review

Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys

Maity, S., Chanda, D. K., Ramasamy, P., Show, B. K., Eckert, J. & Bera, S., 1 Nov 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 1, p. 109-115 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures

Kim, S. Y., Oh, H. R., Kim, H. A., Lee, A. Y., Kim, H. J., Yang, S. S., Kim, Y. J., Choi, H. J., Kim, I. H., Kim, H. G., Eckert, J., Kim, J. R. & Lee, M. H., 28 Oct 2019, In: Journal of applied physics. 126, 16, 165109.

Research output: Contribution to journal › Article › Research › peer-review

An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powders

Chawake, N., Ghosh, P., Eckert, J. & Kottada, R. S., 1 Sept 2019, In: Scripta Materialia. 170.2019, September, p. 156-160 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions

Bera, S., Ramasamy, P., Sopu, D., Sarac, B., Zalesak, J., Gammer, C., Stoica, M., Calin, M. & Eckert, J., 15 Jul 2019, In: Journal of alloys and compounds. 793.2019, 15 July, p. 552-563 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites

Escher, B., Kaban, I., Kühn, U., Eckert, J. & Pauly, S., 25 Jun 2019, In: Journal of alloys and compounds. 790.2019, 25 June, p. 657-665 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect

Glushko, O., Mühlbacher, M., Gammer, C., Cordill, M. J., Mitterer, C. & Eckert, J., 4 Jun 2019, In: Scientific Reports. 9, 1, p. 1-9 9 p., 8281.

Research output: Contribution to journal › Article › Research › peer-review

Annealing-assisted high-pressure torsion in Zr₅₅Cu₃₀Al₁₀Ni₅ metallic glass

Sarac, B., Spieckermann, F., Rezvan, A., Gammer, C., Krämer, L., Kim, J. T., Keckes, J., Pippan, R. & Eckert, J., 5 May 2019, In: Journal of alloys and compounds. 784.2019, p. 1323-1333 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanochemical Synthesis and Hydrogenation Behavior of (TiFe)_100-xNi_xAlloys

Zadorozhnyy, V., Berdonosova, E., Gammer, C., Eckert, J., Zadorozhnyy, M., Bazlov, A., Zheleznyi, M., Kaloshkin, S. D. & Klyamkin, S., 2 May 2019, In: Journal of alloys and compounds. 796.2019, 5 August, p. 42 - 46 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Structure Property Relationships in Shape Memory Metallic Glass Composites

Sopu, D., Yuan, X. D., Moitzi, F., Stoica, M. & Eckert, J., 1 May 2019, In: Materials. 12.2019, 9, 10 p., 1419.

Research output: Contribution to journal › Article › Research › peer-review

Fast and direct determination of fragility in metallic glasses using chip calorimetry

Spieckermann, F., Steffny, I., Bian, X., Ketov, S., Stoica, M. & Eckert, J., 13 Mar 2019, In: Heliyon. 5.2019, 3, 13 p., e01334.

Research output: Contribution to journal › Article › Research › peer-review

High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films

Ketov, S. V., Ivanov, Y. P., Sopu, D., Luguine-Luzgin, D. V., Suryanarayana, C., Rodin, A. O., Schöberl, T., Greer, A. L. & Eckert, J., 7 Mar 2019, In: Materials today advances. 2019, 1, 100004.

Research output: Contribution to journal › Article › Research › peer-review

Controlling the distribution of structural heterogeneities in severely deformed metallic glass

Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In: Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Estimation of diffusivity from densification data obtained during spark plasma sintering

Chawake, N., Ghosh, P., Raman, L., Srivastav, A. K., Paul, T., Harimkar, S. P., Eckert, J. & Kottada, R. S., 1 Mar 2019, In: Scripta Materialia. 161.2019, March, p. 36-39 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Influence of directional microstructure on mechanical properties in Al‐based ultrafine bimodal lamellar structured alloy

Kim, J. T., Hong, S. H., Eckert, J. & Kim, K. B., 28 Feb 2019, In: Material design & processing communications. 1.2019, 2, 5 p., e52.

Research output: Contribution to journal › Article › Research › peer-review

Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses

Peng, C. X., Sopu, D., Cheng, Y., Song, K. K., Wang, S., Eckert, J. & Wang, L., 16 Feb 2019, In: Materials and Design. 168.2019, 15 April, 107662.

Research output: Contribution to journal › Article › Research › peer-review

Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe_26.7Co_26.7Ni_26.7Si_8.9B₁₁ High-Entropy Alloys

Zhang, Z., Song, K. K., Li, R., Xue, Q. S., Wu, S., Yan, D., Li, X. L., Song, B., Sarac, B., Kim, J. T., Ramasamy, P., Wang, L. & Eckert, J., 15 Feb 2019, In: Materials. 12.2019, 4, 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting

Salman, O. O., Gammer, C., Eckert, J., Chaubey, A. K. & Scudino, S., 31 Jan 2019, In: Materials science and engineering C (Biomimetic and supramolecular systems). 748.2019, 4 March, p. 205-212 8 p.

Research output: Contribution to journal › Article › Research › peer-review

A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses

Dong, Q., Pan, Y., Tan, J., Qin, X. M., Li, C. J., Gao, P., Feng, Z. X., Calin, M. & Eckert, J., 17 Jan 2019, In: Journal of alloys and compounds. 785.2019, 15 May, p. 422 - 428 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

Research output: Contribution to journal › Article › Research › peer-review

Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dec 2018, (E-pub ahead of print) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49.2018, 12, p. 6469-6478 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Ductile bulk metallic glass by controlling structural heterogeneities

Scudino, S., Bian, J. J., Shakur Shahabi, H., Şopu, D., Sort, J., Eckert, J. & Liu, G., 1 Dec 2018, In: Scientific Reports. 8.2018, 1, 12 p., 9174.

Research output: Contribution to journal › Article › Research › peer-review

Erratum to: Origin of large plasticity and multiscale effects in iron-based metallic glasses (Nature Communications, (2018), 9, 1, (1333), 10.1038/s41467-018-03744-5)

Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 1 Dec 2018, In: Nature Communications. 9, 1, 3761.

Research output: Contribution to journal › Comment/debate › peer-review

Origin of large plasticity and multiscale effects in iron-based metallic glasses

Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 1 Dec 2018, In: Nature Communications. 9.2018, 1, 10 p., 1333.

Research output: Contribution to journal › Article › Research › peer-review

Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N. M., Prashanth, K. G., Park, J. M., Song, K. K., Wang, W. M., Eckert, J. & Kim, K. B., 24 Nov 2018, In: Journal of non-crystalline solids. 505.2019, 1 February, p. 310-319 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases

Wang, Z., Prashanth, K. G., Zhang, W. W., Scudino, S. & Eckert, J., 24 Nov 2018, In: Powder Technology. 343.2019, 1 February, p. 733-737 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical properties of the magnetocaloric intermetallic LaFe_11.2Si_1.8 alloy at different length scales

Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Synthesis, characterization and thermodynamic stability of nanostructured epsilon-iron carbonitride powder prepared by a solid-state mechanochemical route

Rounaghi, S. A., Vanpoucke, D. E. P., Esmaeili, E., Scudino, S. & Eckert, J., 3 Nov 2018, In: Journal of alloys and compounds. 778.2019, 25 March, p. 327-336 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

Wang, Z., Prashanth, K. G., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2, p. 157-166 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Metallic glass nanolaminates with shape memory alloys

Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733, p. 80-86 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium

Pilz, S., Gebert, A., Voss, A., Oswald, S., Göttlicher, M., Hempel, U., Eckert, J., Rohnke, M., Janek, J. & Calin, M., 1 Jul 2018, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106.2018, 5, p. 1686-1697 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses

Geng, G., Yan, Z., Hu, Y., Wang, Z., Ketov, S. V. & Eckert, J., 22 Jun 2018, In: Journal of Materials Research. 33.2018, 18, p. 2775-2783 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl₃ and TiC

Liu, X. Q., Li, C. J., Yi, J. H., Prashanth, K. G., Chawake, N., Tao, J. M., You, X., Liu, Y. C. & Eckert, J., 19 Jun 2018, In: Journal of alloys and compounds. 765.2018, 15 October, p. 98-105 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and mechanical properties of hierarchical multi-phase composites based on Al-Ni-type intermetallic compounds in the Al-Ni-Cu-Si alloy system

Kim, J. T., Hong, S. H., Park, J. M., Eckert, J. & Kim, K. B., 15 Jun 2018, In: Journal of alloys and compounds. 749, p. 205-210 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability

Taghvaei, A. H., Shirazifard, N. G., Ramasamy, P., Bednarčik, J. & Eckert, J., 5 Jun 2018, In: Journal of alloys and compounds. 748.2018, June, p. 553-560 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Universally scaling Hall-Petch-like relationship in metallic glass matrix composites

Liu, Y. Y., Liu, P. Z., Li, J. J., Liaw, P. K., Spieckermann, F., Kiener, D., Qiao, J. W. & Eckert, J., Jun 2018, In: International journal of plasticity. 105, p. 225-238

Research output: Contribution to journal › Article › Research › peer-review

Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics

Maity, T., Prashanth, K. G., Balci, Ö., Kim, J. T., Schöberl, T., Wang, Z. & Eckert, J., 31 May 2018, (E-pub ahead of print) In: International journal of plasticity. 109.2018, October, p. 121-136 16 p.

Research output: Contribution to journal › Article › Research › peer-review

Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume

Maity, T., Prashanth, K. G., Balçi, Ö., Wang, Z., Jia, Y. D. & Eckert, J., 25 May 2018, (E-pub ahead of print) In: Composites Part B: Engineering. 150.2018, 1 October, p. 7-13 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys

Kim, J. T., Hong, S. H., Bian, X., Gokuldoss, P. K., Song, K., Eckert, J., Park, J. M. & Kim, K. B., 17 May 2018, In: Intermetallics. 99.2018, August, p. 1-7 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

Research output: Contribution to journal › Article › Research › peer-review

Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure

Li, F. X., Hao, P. D., Yi, J. H., Şopu, D., Tan, J., Chong, X. Y. & Eckert, J., 30 Apr 2018, In: Intermetallics. 98.2018, July, p. 60-68 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Local nanoscale strain mapping of a metallic glass during in situ testing

Gammer, C., Ophus, C., Pekin, T. C., Eckert, J. & Minor, A. M., 23 Apr 2018, In: Applied physics letters. 112, 17, 171905.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, p. 122-128 7 p.

Research output: Contribution to journal › Article › Research › peer-review

A heat treatable TiB₂/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

Wang, P., Gammer, C., Brenne, F., Niendorf, T., Eckert, J. & Scudino, S., 10 Apr 2018, In: Composites Part B: Engineering. 147.2018, 15 August, p. 162-168 7 p.

Research output: Contribution to journal › Article › Research › peer-review

On cryothermal cycling as a method for inducing structural changes in metallic glasses

Ketov, S. V., Trifonov, A. S., Ivanov, Y. P., Churyumov, A. Y., Lubenchenko, A. V., Batrakov, A. A., Jiang, J., Louzguine-Luzgin, D. V., Eckert, J., Orava, J. & Greer, A. L., 1 Apr 2018, In: NPG Asia Materials. 10, 4, p. 137-145 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Liquid ejection temperature dependence of structure and glass transition behavior for rapidly solidified Zr-Al-M (M=Ni, Cu or Co) ternary glassy alloys

Wang, X. H., Inoue, A., Zhao, J. F., Kong, F. L., Zhu, S. L., Kaban, I., Stoica, M., Oswald, S., Fan, C., Shalaan, E., Al-Marzouki, F., Eckert, J., Yin, F. X. & Li, Q., 30 Mar 2018, In: Journal of alloys and compounds. 739, p. 1104-1114 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses

Zhang, Z. Q., Song, K. K., Sun, B. A., Wang, L., Cui, W. C., Qin, Y. S., Han, X. L., Xue, Q. S., Peng, C. X., Sarac, B., Spieckermann, F., Kaban, I. & Eckert, J., 29 Mar 2018, In: Philosophical magazine. 98.2018, 19, p. 1744-1764 21 p.

Research output: Contribution to journal › Article › Research › peer-review

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Sun, H., Song, K., Han, X., Xing, H., Li, X., Wang, S., Kim, J., Chawake, N., Maity, T., Wang, L. & Eckert, J., 1 Mar 2018, In: Metals : open access journal . 8, 3, p. 196 1 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermomechanical processing of In-containing β-type Ti-Nb alloys

Pilz, S., Geissler, D., Calin, M., Eckert, J., Zimmermann, M., Freudenberger, J. & Gebert, A., 1 Mar 2018, In: Journal of the Mechanical Behavior of Biomedical Materials. 79, p. 283-291 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys

Han, X. L., Song, K. K., Zhang, L. M., Xing, H., Sarac, B., Spieckermann, F., Maity, T., Muehlbacher, M., Wang, L., Kaban, I. & Eckert, J., Mar 2018, In: Journal of Materials Engineering and Performance. 27, 3, p. 1005-1015

Research output: Contribution to journal › Article › Research › peer-review

Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors

Kauschke, V., Gebert, A., Calin, M., Eckert, J., Scheich, S., Heiss, C. & Lips, K. S., 28 Feb 2018, In: PLOS ONE. 13.2018, 2, 17 p., e0193468.

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed

Salman, O., Funk, A., Waske, A., Eckert, J. & Scudino, S., 15 Feb 2018, In: Technologies. 6.2018, 25, 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Anisotropy in local microstructure – Does it affect the tensile properties of the SLM samples?

Maity, T., Chawake, N., Kim, J. T., Eckert, J. & Prashanth, K. G., 15 Feb 2018, In: Manufacturing Letters. 15.2018 Part A, January, p. 33-37 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses

Luo, Q., Schwarz, B., Swarbrick, J. C., Bednarčik, J., Zhu, Y., Tang, M., Zheng, L., Li, R., Shen, J. & Eckert, J., 12 Feb 2018, In: Physical Review B. 97.2018, 6, 7 p., 064104.

Research output: Contribution to journal › Article › Research › peer-review

Amorphous martensite in β-Ti alloys

Zhang, L., Zhang, H., Ren, X., Eckert, J., Wang, Y., Zhu, Z., Gemming, T. & Pauly, S., 6 Feb 2018, In: Nature Communications. 9.2018, 1, 8 p., 506.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

Wang, P., Deng, L., Prashanth, K. G., Pauly, S., Eckert, J. & Scudino, S., 1 Feb 2018, In: Journal of alloys and compounds. 735.2018, February, p. 2263-2266 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermally-triggered Dual In-situ Self-healing Metallic Materials

Kim, J. T., Kim, H. J., Hong, S. H., Park, H. J., Kim, Y. S., Hwang, Y. J., Jeong, Y. B., Park, J. Y., Park, J. M., Sarac, B., Wang, W. M., Eckert, J. & Kim, K. B., 1 Feb 2018, (E-pub ahead of print) In: Scientific Reports. 8.2018, 1, 10 p., 2120.

Research output: Contribution to journal › Article › Research › peer-review

Wetting, reactivity, and phase formation at interfaces between Ni–Al melts and TiB2 ultrahigh temperature ceramic

Xi, L., Kaban, I., Nowak, R., Bruzda, G., Sobczak, N. & Eckert, J., 1 Feb 2018, In: Journal of the American Ceramic Society. 101, 2, p. 911-918 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Optimizing mechanical properties of Fe _26.7 Co _26.7 Ni _26.7 Si _8.9 B ₁₁ high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition

Zhang, Z., Song, K. K., Guo, S., Xue, Q. S., Xing, H., Cao, C. D., Dai, F. P., Völker, B., Hohenwarter, A., Maity, T., Chawake, N., Kim, J. T., Wang, L., Kaban, I. & Eckert, J., 23 Jan 2018, In: Scientific Reports. 9.2019, 360, 14 p., 360.

Research output: Contribution to journal › Article › Research › peer-review

Influence of Nb on the microstructure and fracture toughness of (Zr_0.76Fe_0.24)_100-xNb_x nano-eutectic composites

Maity, T., Dutta, A., Jana, P. P., Prashanth, K. G., Eckert, J. & Das, J., 11 Jan 2018, In: Materials. 11.2018, 1, 9 p., 113.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

Research output: Contribution to journal › Article › Research › peer-review

MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography: Structural details probed by X-ray tomography

Funk, A., Zeilinger, M., Miehe, A., Sopu, D., Eckert, J., Dötz, F. & Waske, A., 1 Jan 2018, In: Chemical engineering science : Génie chimique. 175, p. 84-90 7 p.

Research output: Contribution to journal › Article › Research › peer-review

High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors

Kim, S. Y., Lee, G. Y., Park, G. H., Kim, H. A., Lee, A. Y., Scudino, S., Prashanth, K. G., Kim, D. H., Eckert, J. & Lee, M. H., Jan 2018, (E-pub ahead of print) In: Scientific reports (London : Nature Publishing Group). 8.2018, 12 p., 1090.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural characterization of a laser surface remelted Cu-based shape memory alloy

Da Silva, M. R., Gargarella, P., Wolf, W., Gustmann, T., Kiminami, C. S., Pauly, S., Eckert, J. & Bolfarini, C., 2018, In: Materials Research. 2018, 21/3, e20171044.

Research output: Contribution to journal › Article › Research › peer-review

Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

Song, K. K., Han, X., Pauly, S., Qin, Y. S., Kosiba, K., Peng, C. X., Gong, J. H., Chen, P. X., Wang, L., Sarac, B., Ketov, S., Mühlbacher, M., Spieckermann, F., Kaban, I. & Eckert, J., 2018, In: Materials and Design. 139, p. 132-140

Research output: Contribution to journal › Article › Research › peer-review

A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics

Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 729, p. 240-248

Research output: Contribution to journal › Article › Research › peer-review

Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dec 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Research output: Contribution to journal › Article › Research › peer-review

Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity

Zhang, L., He, Z. Y., Tan, J., Calin, M., Prashanth, K. G., Sarac, B., Völker, B., Jiang, Y. H., Zhou, R. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 727, p. 338-345

Research output: Contribution to journal › Article › Research › peer-review

Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate

Vogel, U., Oswald, S. & Eckert, J., Dec 2017, In: Applied surface science. 425, p. 254-260

Research output: Contribution to journal › Article › Research › peer-review

Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

Li, F., Yi, J. & Eckert, J., Dec 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48A, 12, p. 6027-6037

Research output: Contribution to journal › Article › Research › peer-review

Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts

Schmidt, R., Pilz, S., Lindemann, I., Damm, C., Hufenbach, J., Helth, A., Geissler, D., Henss, A., Rohnke, M., Calin, M., Zimmermann, M., Eckert, J., Lee, M. H. & Gebert, A., Dec 2017, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 322, p. 393-401

Research output: Contribution to journal › Article › Research › peer-review

Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification

Balci, Ö., Prashanth, K. G., Scudino, S., Somer, M. & Eckert, J., Dec 2017, (E-pub ahead of print) In: Particulate science and technology : an international journal. 0, p. 1-6

Research output: Contribution to journal › Article › Research › peer-review

Strain dependence of diffusion in Zr-based bulk amorphous alloy

Lee, A. Y., Song, J. K., Oh, H. R., Kim, H., Kim, S. Y., Kwon, A. R., Park, E. S., Lim, C. H., Eckert, J. & Lee, M. H., Dec 2017, In: Journal of applied physics. 122, p. ARTN 245105

Research output: Contribution to journal › Article › Research › peer-review

Structural modification through pressurized sub-Tg annealing of metallic glasses

Foroughi, A., Ashuri, H., Tavakoli, R., Stoica, M., Şopu, D. & Eckert, J., Dec 2017, (E-pub ahead of print) In: Journal of applied physics. 122, p. ARTN 215106

Research output: Contribution to journal › Article › Research › peer-review

Wetting behavior and reactivity between liquid Gd and ZrO2 substrate

Turalska, P., Homa, M., Bruzda, G., Sobczak, N., Kaban, I., Mattern, N. & Eckert, J., 13 Nov 2017, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 53, 3, p. 285-293

Research output: Contribution to journal › Article › Research › peer-review

Structural modifications in sub-T_g annealed CuZr-based metallic glass

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 7 Nov 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, p. 245-252 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Bond length deviation in CuZr metallic glasses

Peng, C. X., Şopu, D., Song, K. K., Zhang, Z. T., Wang, L. & Eckert, J., Nov 2017, In: Physical review : B, Condensed matter and materials physics. 96, p. ARTN 174112

Research output: Contribution to journal › Article › Research › peer-review

Giant thermal expansion and alpha-precipitation pathways in Ti-alloys

Bönisch, M., Panigrahi, A., Stoica, M., Calin, M., Ahrens, E., Zehetbauer, M. J., Skrotzki, W. & Eckert, J., Nov 2017, In: Nature Communications. 8, p. ARTN 1429

Research output: Contribution to journal › Article › Research › peer-review

Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling

Ramasamy, P., Shahid, R. N., Scudino, S., Eckert, J. & Stoica, M., Nov 2017, In: Journal of alloys and compounds. 725, p. 227-236

Research output: Contribution to journal › Article › Research › peer-review

Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

Liu, X., Li, C., Eckert, J., Prashanth, K. G., Renk, O., Teng, L., Liu, Y., Bao, R., Tao, J., Shen, T. & Yi, J., Nov 2017, In: Materials characterization. 133, p. 122-132

Research output: Contribution to journal › Article › Research › peer-review

Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature

Bian, X. L., Wang, G., Yi, J., Jia, Y. D., Bednarčík, J., Zhai, Q. J., Kaban, I., Sarac, B., Mühlbacher, M., Spieckermann, F., Keckes, J. & Eckert, J., 25 Sept 2017, In: Journal of alloys and compounds. 718, p. 254-259 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

Schwab, H., Bönisch, M., Giebeler, L., Gustmann, T., Eckert, J. & Kühn, U., Sept 2017, In: Materials and Design. 130, p. 83-89

Research output: Contribution to journal › Article › Research › peer-review

Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping

Sarac, B., Bera, S., Spieckermann, F., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 31 Aug 2017, In: Scripta materialia. 137, p. 127-131

Research output: Contribution to journal › Article › Research › peer-review

Friction welding of selective laser melted Ti6Al4V parts

Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Hardening of shear band in metallic glass

Wang, J. G., Hu, Y. C., Guan, P. F., Song, K. K., Wang, L., Wang, G., Pan, Y., Sarac, B. & Eckert, J., Aug 2017, In: Scientific reports (London : Nature Publishing Group). 7, p. ARTN 7076

Research output: Contribution to journal › Article › Research › peer-review

Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content

Bönisch, M., Waitz, T., Calin, M., Skrotzki, W. & Eckert, J., 16 Jul 2017, (E-pub ahead of print) In: International journal of plasticity. 85.2016, October, p. 190-202 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Stability of shear banding process in bulk metallic glasses and composites

Qin, Y., Han, X., Song, K., Wang, L., Cheng, Y., Zhang, Z., Xue, Q., Sun, N., Wang, J., Sun, B., Sarac, B., Spieckermann, F., Wang, G., Kaban, I. & Eckert, J., 14 Jul 2017, In: Journal of materials research (JMR). 32, 13, p. 2560-2569 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys

Gargarella, P., Pauly, S., Kiminami, C. S. & Eckert, J., Jul 2017, In: Journal of materials research (JMR). 32, 13, p. 2578-2584

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels

Zeisig, J., Schädlich, N., Giebeler, L., Sander, J., Eckert, J., Kühn, U. & Hufenbach, J., Jul 2017, In: Wear. 382, p. 107-112

Research output: Contribution to journal › Article › Research › peer-review

Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys

Wang, Z., Georgarakis, K., Zhang, W. W., Prashanth, K. G., Eckert, J. & Scudino, S., Jul 2017, In: Wear. 382, p. 78-84

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines

Prashanth, K. G., Kolla, S. & Eckert, J., Jun 2017, In: Materials. 10, 6, p. ARTN 672

Research output: Contribution to journal › Article › Research › peer-review

Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

Li, F., Yi, J. & Eckert, J., Jun 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48A, p. 2971-2978

Research output: Contribution to journal › Article › Research › peer-review

Is the energy density a reliable parameter for materials synthesis by selective laser melting?

Prashanth, K. G., Scudino, S., Maity, T., Das, J. & Eckert, J., Jun 2017, In: Materials Research Letters [Elektronische Ressource]. 5, 6, p. 386-390

Research output: Contribution to journal › Article › Research › peer-review

Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure

Ma, P., Wei, Z. J., Jia, Y. D., Yu, Z. S., Prashanth, K. G., Yang, S. L., Li, C. G., Huang, L. X. & Eckert, J., Jun 2017, In: Journal of alloys and compounds. 709, p. 329-336

Research output: Contribution to journal › Article › Research › peer-review

Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations

Martins, M. L., Eckert, J., Jacobsen, H., dos Santos, E. C., Ignazzi, R., de Araujo, D. R., Bellissent-Funel, M. C., Natali, F., Koza, M. M., Matic, A., de Paula, E. & Bordallo, H. N., 30 May 2017, In: International Journal of Pharmaceutics. 524, p. 397-406

Research output: Contribution to journal › Article › Research › peer-review

Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

Zhang, L., He, Z. Y., Tan, J., Zhang, Y. Q., Stoica, M., Calin, M., Prashanth, K. G., Cordill, M. J., Jiang, Y. H., Zhou, R. & Eckert, J., 1 May 2017, In: Intermetallics. 84, p. 35-41 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries

Jaumann, T., Gerwig, M., Oswald, S., Brendler, E., Hauser, R., Kieback, B., Eckert, J., Giebeler, L. & Kroke, E., May 2017, In: Journal of Materials Chemistry A. 5, 19, p. 9262-9271

Research output: Contribution to journal › Article › Research › peer-review

Glass-forming ability and microstructural evolution of [(Fe0.6Co0.4)(0.75)Si0.05B0.20](96-x)Nb4Mx metallic glasses studied by Mössbauer spectroscopy

Torrens-Serra, J., Bruna, P., Stoica, M. & Eckert, J., May 2017, In: Journal of alloys and compounds. 704, p. 748-759

Research output: Contribution to journal › Article › Research › peer-review

Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study

Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., May 2017, In: Physical chemistry, chemical physics : PCCP. 19, 19, p. 12414-12424

Research output: Contribution to journal › Article › Research › peer-review

Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure

Lu, W. F., Li, C. J., Sarac, B., Şopu, D., Yi, J. H., Tan, J., Stoica, M. & Eckert, J., May 2017, In: Journal of alloys and compounds. 705, p. 445-455

Research output: Contribution to journal › Article › Research › peer-review

Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping

Sarac, B., Bera, S., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 1 Apr 2017, In: Materials science and engineering C (Biomimetic and supramolecular systems). 73, p. 398-405 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

Bera, S., Sarac, B., Balakin, S., Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., Apr 2017, In: Materials and Design. 120, p. 204-211

Research output: Contribution to journal › Article › Research › peer-review

Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

Kosiba, K., Scudino, S., Kobold, R., Kühn, U., Greer, A. L., Eckert, J. & Pauly, S., Apr 2017, In: Acta Materialia. 127, p. 416-425

Research output: Contribution to journal › Article › Research › peer-review

Hysteretic behavior of soft magnetic elastomer composites

Krautz, M., Werner, D., Schrödner, M., Funk, A., Jantz, A., Popp, J., Eckert, J. & Waske, A., 15 Mar 2017, In: Journal of magnetism and magnetic materials. 426, p. 60-63 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermal stability and latent heat of Nb–rich martensitic Ti-Nb alloys

Bönisch, M., Panigrahi, A., Calin, M., Waitz, T., Zehetbauer, M., Skrotzki, W. & Eckert, J., 15 Mar 2017, In: Journal of alloys and compounds. 697, p. 300-309 10 p.

Research output: Contribution to journal › Article › Research › peer-review

β-type Ti-based bulk metallic glass composites with tailored structural metastability

Zhang, L., Zhang, H., Li, W., Gemming, T., Wang, P., Bönisch, M., Şopu, D., Eckert, J. & Pauly, S., 9 Mar 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 708.2017, June, p. 972-981 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Ab-initio and experimental study of phase stability of Ti-Nb alloys

Gutiérrez Moreno, J. J., Bönisch, M., Panagiotopoulos, N. T., Calin, M., Papageorgiou, D. G., Gebert, A., Eckert, J., Evangelakis, G. A. & Lekka, C. E., 5 Mar 2017, In: Journal of alloys and compounds. 696, p. 481-489 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Defining the tensile properties of Al-12Si parts produced by selective laser melting

Prashanth, K. G., Scudino, S. & Eckert, J., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 25-35 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

Zhang, L., He, Z. Y., Tan, J., Zhang, Y. Q., Stoica, M., Prashanth, K. G., Cordill, M. J., Jiang, Y. H., Zhou, R. & Eckert, J., 1 Mar 2017, In: Intermetallics. 82, p. 1-13 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Structure of glassy Cu_47.5Zr_47.5Ag₅ investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation

Jóvári, P., Kaban, I., Escher, B., Song, K. K., Eckert, J., Beuneu, B., Webb, M. A. & Chen, N., 1 Mar 2017, In: Journal of non-crystalline solids. 459, p. 99-102 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26

Research output: Contribution to journal › Article › Research › peer-review

Additive Manufacturing: Reproducibility of Metallic Parts

Prashanth, K. G., Scudino, S., Chatterjee, R. P., Salman, O. O. & Eckert, J., Feb 2017, In: Technologies. 5, p. ARTN 8

Research output: Contribution to journal › Article › Research › peer-review

Local melting to design strong and plastically deformable bulk metallic glass composites

Qin, Y. S., Han, X. L., Song, K. K., Tian, Y. H., Peng, C. X., Wang, L., Sun, B. A., Wang, G., Kaban, I. & Eckert, J., Feb 2017, In: Scientific reports (London : Nature Publishing Group). 7, p. ARTN 42518

Research output: Contribution to journal › Article › Research › peer-review

Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

Völker, B., Jäger, N., Calin, M., Zehetbauer, M., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114, p. 40-46 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Introduction

Messing, G. L., Eckert, J. & Schadler, L. S., 13 Jan 2017, In: Journal of materials research (JMR). 32, 1, p. 1 1 p.

Research output: Contribution to journal › Editorial › peer-review

Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, p. 673-678 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

Kim, J. T., Hong, S. H., Park, H. J., Kim, Y. S., Suh, J. Y., Lee, J. K., Park, J. M., Maity, T., Eckert, J. & Kim, K. B., 9 Jan 2017, In: Scientific reports (London : Nature Publishing Group). 7, 39959.

Research output: Contribution to journal › Article › Research › peer-review

Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications

Okulov, I. V., Volegov, A. S., Attar, H., Bönisch, M., Ehtemam-Haghighi, S., Calin, M. & Eckert, J., 1 Jan 2017, In: Journal of the Mechanical Behavior of Biomedical Materials. 65, p. 866-871 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy

Helth, A., Pilz, S., Kirsten, T., Giebeler, L., Freudenberger, J., Calin, M., Eckert, J. & Gebert, A., 1 Jan 2017, In: Journal of the Mechanical Behavior of Biomedical Materials. 65, p. 137-150 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

Jaumann, T., Balach, J., Langklotz, U., Sauchuk, V., Fritsch, M., Michaelis, A., Teltevskij, V., Mikhailova, D., Oswald, S., Klose, M., Stephani, G., Hauser, R., Eckert, J. & Giebeler, L., 1 Jan 2017, In: Energy Storage Materials. 6, p. 26-35 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting

Sander, J., Hufenbach, J., Giebeler, L., Bleckmann, M., Eckert, J. & Kühn, U., 1 Jan 2017, In: Scripta materialia. 126, p. 41-44 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition

Pang, J., Mendes, R. G., Wrobel, P. S., Wlodarski, M. D., Ta, H. Q., Zhao, L., Giebeler, L., Trzebicka, B., Gemming, T., Fu, L., Liu, Z., Eckert, J., Bachmatiuk, A. & Ruemmeli, M. H., Jan 2017, In: ACS nano. 11, 2, p. 1946-1956

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting

Jia, Y. D., Ma, P., Prashanth, K. G., Wang, G., Yi, J., Scudino, S., Cao, F. Y., Sun, J. F. & Eckert, J., 2017, In: Journal of alloys and compounds. 699, p. 548-553 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties

Sander, J., Hufenbach, J., Bleckmann, M., Giebeler, L., Wendrock, H., Oswald, S., Gemming, T., Eckert, J. & Kühn, U., 30 Dec 2016, In: Journal of materials science. 52.2017, 9, p. 4944-4956 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Compression behavior of inter-particle regions in high-strength Al₈₄Ni₇Gd₆Co₃ alloy

Wang, Z., Qu, R. T., Prashanth, K. G., Eckert, J. & Scudino, S., 15 Dec 2016, In: Materials letters. 185, p. 25-28 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Substitution effect on glass formation of Ni_xCo_60−xNb₄₀ alloys

Ye, S., Zhang, S., Eckert, J. & Yu, P., 15 Dec 2016, In: Materials letters. 185, p. 541-544 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Tensile Properties of Al-12Si Fabricated via Selective Laser Melting (SLM) at Different Temperatures

Prashanth, K. G., Scudino, S. & Eckert, J., 2 Dec 2016, In: Technologies. 4, 38

Research output: Contribution to journal › Article › Research › peer-review

Negentropic stabilization of metastable β-Ti in bulk metallic glass composites

Zhang, L., Zhang, H. F., Li, W. Q., Gemming, T., Zhu, Z. W., Fu, H. M., Eckert, J. & Pauly, S., 1 Dec 2016, In: Scripta materialia. 125, p. 19-23 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Cryogenic-temperature-induced structural transformation of a metallic glass

Bian, X., Wang, G., Wang, Q., Sun, B., Hussain, I., Zhai, Q., Mattern, N., Bednarčík, J. & Eckert, J., 30 Nov 2016, (E-pub ahead of print) In: Materials Research Letters [Elektronische Ressource]. 5.2017, 4, p. 284-291 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles

Chaubey, A. K., Prashanth, K. G., Wang, Z., Scudino, S., Mukhopadhyay, N. & Eckert, J., 19 Nov 2016, In: Technologies. 4, 37

Research output: Contribution to journal › Article › Research › peer-review

Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties

Wang, P., Li, H. C., Prashanth, K. G., Eckert, J. & Scudino, S., 16 Nov 2016, (E-pub ahead of print) In: Journal of alloys and compounds. 707.2017, June, p. 287-290 4 p.

Research output: Contribution to journal › Article › Research › peer-review