Montanuniversität

Organisational unit: University

351 - 400 out of 30,152Page size: 50

Publications / Theses

  1. 2021
  2. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers Inc., 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Blastability and Ore Grade Assessment from Drill Monitoring for Open Pit Applications

    Navarro, J., Seidl, T., Hartlieb, P., Sanchidrián, J. A., Segarra, P., Couceiro, P., Schimek, P. & Godoy, C., 17 Apr 2021, In: Rock mechanics and rock engineering. 2021, 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., 17 Apr 2021, In: Open ceramics. 6.2021, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques

    Gonzalez-Gutierrez, J., 15 Apr 2021, Reference Module in Materials Science and Materials Engineering. The Netherlands: Elsevier

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    Microstructure refinement and enhanced tensile properties of Al-11Mg2Si alloy modified by erbium

    Wang, K. Y., Xiang, J., Zhao, R. D., Bi, J. L., Wu, X. F., Chen, M. H., Wu, F. F. & Eckert, J., 15 Apr 2021, In: Journal of alloys and compounds. 860, 158421.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Palaeoenvironmental reconstruction of the Konin Basin (central Poland) during lignite accumulation linked to the mid-Miocene climate optimum

    Widera, M., Bechtel, A., Chomiak, L., Maciaszek, P., Słodkowska, B., Wachocki, R., Worobiec, E., Worobiec, G. & Zieliński, T., 15 Apr 2021, In: Palaeogeography, palaeoclimatology, palaeoecology. 568, 110307.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    High resolution additive manufacturing with acrylate based vitrimers using organic phosphates as transesterification catalyst

    Rossegger, E., Höller, R., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Griesser, T. & Schlögl, S., 14 Apr 2021, In: Polymer. 221, 14 April, 7 p., 123631.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Role of Organic Phosphates and Phosphonates in Catalyzing Dynamic Exchange Reactions in Thiol-Click Vitrimers

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 14 Apr 2021, In: Macromolecular chemistry and physics.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 13 Apr 2021, In: Journal of Materials Engineering and Performance.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Ortsaufgelöste Gegenüberstellung vom Exergieverbrauch und dem technischen erneuerbaren Exergiepotential in Österreich

    Sejkora, C., Kühberger, L. & Kienberger, T., 13 Apr 2021, 21. Klimatag: Clash of Cultures? Klimaforschung trifft Industrie!. p. 42-43 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. E-pub ahead of print

    Unusual relationship between impact toughness and grain size in a high-manganese steel

    Xie, P., Shen, S., Wu, C., LI, J. & Chen, J., 13 Apr 2021, (E-pub ahead of print) In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 89.2021, 30 October, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Beitrag der Abfallwirtschaft zum Klimaschutz anhand von Forschungsprojekten der Montanuniversität Leoben

    Friedrich, K., Pomberger, R. & Lehner, M., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Crossover-Legierungen – Innovative Aluminiumwerkstoffe für nachhaltigen Leichtbau

    Stemper, L., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Entwicklung eines nachhaltigen Kultivierungssystems für Nahrungsmittel in Metropolregionen

    Ellersdorfer, M. & Stocker, K., 12 Apr 2021, Tagungsband 21. Klimatag: Clash of Cultures? Klimaforschung trifft Industrie!. Online, p. 60-61 2 p. P05

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    SUSKULT - Wenn das Ende der Nahrungskette zum Anfang wird: Entwicklung eines nachhaltigen Kultivierungssystems für Nahrungsmittel in Metropolregionen

    Ellersdorfer, M. & Stocker, K., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Functionally graded additive manufacturing

    Pei, E., Rumana Kabir, I., Godec, D., Gonzalez-Gutierrez, J. & Nordin, A., 9 Apr 2021, Additive Manufacturing with Functionalized Nanomaterials. Amsterdam, Neterlands, p. 35-54 20 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 2021, 4, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Two-dimensional talc as a van der Waals material for solid lubrication at the nanoscale

    Vasić, B., Czibula, C. M., Kratzer, M., Ruegger Almeida Neves, B., Matkovic, A. & Teichert, C., 6 Apr 2021, In: Nanotechnology. 32.2021, 26, 11 p., 265701.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Effect of pressure and temperature on microstructure of self-assembled gradient AlxTi1−XN coatings

    Zalesak, J., Todt, J., Michalička, J., Sartory, B., Matko, I., Lessiak, M., Traxler, M., Weißenbacher, R., Pitonak, R., Gammer, C. & Keckes, J., 3 Apr 2021, In: Coatings. 11.2021, 4, 15 p., 416.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Dielectric properties of shrinkage-free poly(2-oxazoline) networks from renewable resources

    Blaschke, F., Marx, P., Hirner, S., Mühlbacher, I., Wewerka, K. & Wiesbrock, F., 2 Apr 2021, In: Polymers. 13, 8, 1263.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Size‐induced constraint effects on crack initiation and propagation parameters in ductile polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 2 Apr 2021, In: Materials. 14, 8, 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Explicit continuum scale modeling of low-salinity mechanisms

    Ott, H., Kurgyis, K., Hommel, J., Flemisch, B. & Helmig, R., 1 Apr 2021, In: Journal of Petroleum Science and Engineering. 2021, 199, 108336.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Lean Smart Maintenance Reifegradmodell zur Transformation der Instandhaltungsorganisation

    Maier, H., Schmiedbauer, O. & Biedermann, H., 1 Apr 2021, In: WING-Business. 2021, 01, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Partitioning of heavy metals in different particle-size fractions of soils from former mining and smelting locations in Austria

    Jelecevic, A., Sager, M., Vollprecht, D., Puschenreiter, M. & Liebhard, P., 1 Apr 2021, In: Eurasian journal of soil science . 10.2021, 2, p. 123-131 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    PEDOT-supported Pd nanocatalysts - oxidation of formic acid

    Nakova, A., Ilieva, M., Czibula, C., Teichert, C. & Tsakova, V., 1 Apr 2021, In: Electrochimica acta. 374, 137931.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere

    Nimmervoll, M., Mori, G. K., Schmid, A., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A new insight to the assessment of asphaltene characterization by using fortier transformed infrared spectroscopy

    Taherian, Z., Dehaghani, A. S., Ayatollahi, S. & Kharrat, R., Apr 2021, In: Journal of Petroleum Science and Engineering. 205, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Assessing the potential of online ICP–MS analysis to optimize Ca/matrix separation using DGA Resin for subsequent isotopic analysis

    Retzmann, A., Walls, D., Miller, K., Wieser, M., Irrgeher, J. & Prohaska, T., Apr 2021, In: Monatshefte fur Chemie. 152, 4, p. 401-410 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Comprehensive thermal maturity assessment in shales: a case study on the upper cretaceous Qingshankou formation (Songliao Basin, NE China)

    Zhang, P., Misch, D., Meng, Q., Bechtel, A., Sachsenhofer, R. F., Liu, Z., Gao, F., Hu, F., Zhang, S. & Tang, B., Apr 2021, In: International Journal of Earth Sciences. 110, 3, p. 943-962 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

    Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H. & Mayer, S., Apr 2021, In: Intermetallics. 2021, 131, p. 1-10 107109.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations

    Wagner, A., Holec, D., Mayrhofer, P. H. & Bartosik, M., Apr 2021, In: Materials and Design. 2021, 202, 10 p., 109517.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40, 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

    Coleman, K., Ritter, M., Bermejo, R. & Trolier-McKinstry, S., Apr 2021, In: Journal of the European Ceramic Society. 41, 4, p. 2465-2471 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Medium-range order dictates local hardness in bulk metallic glasses

    Nomoto, K., Ceguerra, A. V., Gammer, C., Li, B., Bilal, H., Hohenwarter, A., Gludovatz, B., Eckert, J., Ringer, S. P. & Kruzic, J. J., Apr 2021, In: Materials today. 44, p. 48-57 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Role of elastic strain energy in spheroidal precipitates revisited

    Böhm, H. J., Zickler, G., Fischer, F.-D. & Svoboda, J., Apr 2021, In: Mechanics of materials. 155, April, 6 p., 103781.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Rubber Injection Molding with Quality Recognition

    Hutterer, T., Berger-Weber, G., Roman Christopher, K., Friesenbichler, W., Klutz, A., Leng, T. & Mayr, K., Apr 2021, In: Kunststoffe <München> / Kunststoffe international. 2021, 4, p. 6 - 9 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Seismic structure of the Cheb Basin from high resolution surveying – data quality assessment and first results

    Banasiak, N. & Bleibinhaus, F., Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    退火处理对激光选区激光熔化成形 Ti-6Al-4V 合金的显微组织和力学性能影响

    Wang, P., Chen, F. H., Eckert, J., Pilz, S., Scudino, S. & Prashanth, K. G., Apr 2021, In: Journal of Central South University = Zhongnan-Daxue-xuebao : yingwen-ban. 28, 4, p. 1068-1077 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Composition-dependent dynamic precipitation and grain refinement in Al-Si system under high-pressure torsion

    Jin, S., Luo, Z., An, X., Liao, X., LI, J. & Sha, G., 30 Mar 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 68, p. 199-208 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Approaches Toward In Situ Reinforcement of Organic Rubbers: Strategy and Recent Progress

    Strohmeier, L., Schrittesser, B. & Schlögl, S., 28 Mar 2021, In: Polymer reviews.

    Research output: Contribution to journal › Review article › peer-review

  45. Published

    Beethovens Tod – Folge ärztlichen Fehlverhaltens?

    Reiter, C. & Prohaska, T., 25 Mar 2021, In: Wiener medizinische Wochenschrift.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Crystal structure and oxygen nonstoichiometry of the third-order Ruddlesden-Popper phase Pr4(Ni0.9Co0.1)3O10-δ

    Berger, C., Bucher, E., Merkle, R., Maier, J. & Sitte, W., 24 Mar 2021, In: Open ceramics. 6.2021, June, 8 p., 100094.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Nanoporous Pd-Cu-Si Amorphous Thin Films for Electrochemical Hydrogen Storage and Sensing

    Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 22 Mar 2021, In: ACS Applied Energy Materials. 4, 3, p. 2672-2680 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Zr addition-dependent twin morphology evolution and strengthening response in nanostructured Al thin films

    Li, G. Y., Wang, Y. Q., Zuo, J. D., Zhang, M., He, C., Feng, X., Luan, J. H., Lu, Y., Zhang, J. Y., Cazottes, S., Kiener, D., Liu, G. & Sun, J., 19 Mar 2021, In: Materialia. 16.2021, May, 1 p., 101076.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    High-Tech-Metalle in ostalpinen Buntmetallsulfidvorkommen: geologische Faktoren ihrer Anreicherung, Verteilung und Mobilisation (drei MRI-Projekte 2015–2019)

    Angerer, T., Melcher, F., Onuk, P., Tropper, P., Volgger, A. & Gasteiger, P., 18 Mar 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 4, p. 181-192 12 p.

    Research output: Contribution to journal › Article › Research

  50. Published

    Interfacial Band Engineering of MoS2/Gold Interfaces Using Pyrimidine-Containing Self-Assembled Monolayers: Toward Contact-Resistance-Free Bottom-Contacts

    Matkovic, A., Petritz, A., Schider, G., Krammer, M., Kratzer, M., Karner-Petritz, E., Fian, A., Gold, H., Gärtner, M., Terfort, A., Teichert, C., Zojer, E., Zojer, K. & Stadlober, B., 18 Mar 2021, In: Advanced Electronic Materials. 6, 5, 6 p., 2000110.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Downhole Dynamometer Sensors for Sucker Rod Pumps

    Langbauer, C., Diengsleder-Lambauer, K. & Lieschnegg, M., 15 Mar 2021, In: IEEE sensors journal. 2021, Volume 21/6

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...604 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402