Montanuniversität

Organisational unit: University

301 - 400 out of 30,152Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Dekarbonisierungsszenarien für das industrielle Energiesystem in Österreich

    Nagovnak, P., Kienberger, T., Geyer, R. & Hainoun, A., 23 May 2021, In: Elektrotechnik und Informationstechnik.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Nayak, G. K., Renk, O., Holec, D., Mayrhofer, P. H. & Zhang, Z., 21 May 2021, In: Acta materialia. 214.2021, 1 August, 11 p., 117004.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    The Detection and Characterization of Defects in Metal/Non-metal Sandwich Structures by Thermal NDT, and a Comparison of Areal Heating and Scanned Linear Heating by Optical and Inductive Methods

    Chulkov, A., Tuschl, C., Nesteruk, D. A., Oswald-Tranta, B., Vavilov, V. P. & Kulmova, M. V., 21 May 2021. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Correction to: Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiha, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 20 May 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Comment/debate › peer-review

  7. Published

    Crack Propagation Analysis of Compression Loaded Rolling Elements

    Dlhý, P., Poduska, J., Berer, M., Gosch, A., Slavik, O., Nahlik, L. & Hutař, P., 19 May 2021, In: Materials. 14.2021, 10, 24 p., 2656.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Thermal analysis of lithium ion battery cathode materials for the development of a novel pyrometallurgical recycling approach

    Windisch-Kern, S., Holzer, A., Ponak, C., Hochsteiner, T. & Raupenstrauch, H., 16 May 2021, In: Carbon resources conversion. 2021, 4, p. 184 189 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    A new development of four-point method to measure the electrical resistivity in situ during plastic deformation

    Saberi, S., Stockinger, M., Stoeckl, C., Buchmayr, B., Weiss, H., Afsharnia, R. & Hartl, K., 11 May 2021, In: Measurement. 180.2021, August, 109547.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Investigation of the Potential to Use Real-time Data in Production Planning and Control of Make to Order (MTO) Manufacturing Companies

    Woschank, M., Dallasega, P. & Kapeller, J., 9 May 2021, Industry 4.0 for SMEs : Concepts, Examples and Applications. Palgrave Macmillan Ltd., p. 165 - 186

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Casting new light on tungsten deposits in the Eastern Alps

    Altenberger, F., Raith, J., Weilbold, J., Auer, C., Knoll, T., Paulick, H., Schedl, A., Aupers, K., Schmidt, S. & Neinavaie, H., 7 May 2021, In: Zeitschrift der Deutschen Gesellschaft für Geowissenschaften : ZDGG. 172, 1, p. 63-72 10 p., 10.1127/zdgg/2021/0262.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Leveraging integration facades for model-based tool interoperability

    Paskaleva, G., Mazak-Huemer, A., Wimmer, M. & Bednar, T., 5 May 2021, In: Automation in construction. 128, p. 1-21 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Planning and implementation of a digital shadow for the friction factor quantification of the ECAP process using grey box modeling approach and finite element analysis

    Schwarz, A., Stockinger, M. & Ralph, B. J., 4 May 2021, CIRP. Vol. 2020. p. 237 241 p. 99. ( Procedia CIRP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Kautschukspritzgießen mit Qualitätserkennung

    Hutterer, T., Berger-Weber, G., Kerschbaumer, R. C., Friesenbichler, W., Klutz, A., Leng, T. & Mayr, K., 3 May 2021, In: Kunststoffe. 2021, 5, p. 18 - 21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  17. Published

    Atomistic understanding of creep and relaxation mechanisms of Cu64Zr36 metallic glass at different temperatures and stress levels

    Wu, W. P., Şopu, D., Yuan, X., Adjaoud, O., Song, K. K. & Eckert, J., 1 May 2021, In: Journal of non-crystalline solids. 559, 120676.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of high pressure torsion on crystallization and magnetic properties of Fe73.9Cu1Nb3Si15.5B6.6

    Antoni, M., Spieckermann, F., Soprunyuk, V., Chawake, N., Sarac, B., Zálešák, J., Polak, C., Gammer, C., Pippan, R., Zehetbauer, M. & Eckert, J., 1 May 2021, In: Journal of magnetism and magnetic materials. 525.2021, 1 May, 6 p., 167679.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Origins of major and minor ash constituents of solid recovered fuel for co-processing in the cement industry

    Viczek, S. A., Aldrian, A., Pomberger, R. & Sarc, R., 1 May 2021, In: Waste management. 126, p. 423-432 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Algorithm for the determination of the angle of repose in bulk material analysis

    Müller, D., Fimbinger, E. & Brand, C., May 2021, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 383.2021, May, p. 598-605 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Dekarbonisierung in Salzburgs Skigebieten – Entwicklung von Optimierungsalgorithmen und Energiemanagementsystemen zur Steigerung der Energieeffizienz, Minimierung von Emissionen und Optimierung von Flexibilitäten

    Kienberger, T. (Guest editor), Kritzer, S., Passegger, H., Ayoub, T., Liedtke, P., Stadler, M., Zellinger, M., Iglar, B., Korner, C. & Aghaie, H., May 2021, In: Elektrotechnik und Informationstechnik.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Longitudinal and transverse low frequency viscoelastic characterization of wood pulp fibers at different relative humidity

    Czibula, C., Seidlhofer, T., Ganser, C., Hirn, U. & Teichert, C., May 2021, In: Materialia. 16, 101094.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mechanistic study of the carbonated smart water in carbonate reservoirs

    Al Karfry, L., Kharrat, R. & Ott, H., May 2021, In: Greenhouse Gases: Science and Technology. 2021, 11, p. 661-681 21 p., 2071.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Ludwig, A., Kharicha, A., Gomes Rodrigues, C. & Schumacher, P., May 2021, In: Applied Mathematical Modelling. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Niedertemperatur-Wärme- und Kältenetze für denkmalgeschützte Bestandsgebäude mit industrieller Abwärme und Geothermie

    Kienberger, T. (Guest editor), Haslinger, E., Kienberger, T., Hammer, A., Götzl, G., Ponwieser, K., Biermayr, P., Illyés, V., Turewicz, V., Friedrich, R., Stuckey, D., Bartak, G., Vogl, F., Niederbrucker, R., Bauernfeind, D., Kinner, P., Holzer, P., Koch, G. & Huber, D., May 2021, In: Elektrotechnik und Informationstechnik.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Source rock potential, crude oil characteristics and oil-to-source rock correlation in a Central Paratethys sub-basin, the Hungarian Palaeogene Basin (Pannonian basin)

    Körmös, S., Sachsenhofer, R. F., Bechtel, A., Radovics, B. G., Milota, K. & Schubert, F., May 2021, In: Marine and petroleum geology. 127, 104955.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    The 'Industrial Symbiosis Gap': information asymmetries are the main challenge for industrial symbiosis - evidence from four Austrian testbeds with a focus on heat exchange

    Kienberger, T. (Guest editor), Moser, S. & Rodin, V., May 2021, In: Elektrotechnik und Informationstechnik.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Twisted graphene in graphite: Impact on surface potential andchemical stability

    Tran, T. H., Rodriguez, R. D., Salerno, M., Matković, A., Teichert, C. & Sheremet, E., May 2021, In: Carbon. 176.2021, May, p. 431-439 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A modelling approach to describe the DC current-voltage behaviour of low-voltage zinc oxide varistors

    Kaufmann, B., Billovits, T., Kratzer, M., Teichert, C. & Supancic, P., 29 Apr 2021, In: Open ceramics. 6.2021, June, 11 p., 100113.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Description of laboratory analyses performed at Montanuniversität Leoben (MUL) in Leoben, Austria

    Haas, M., Gegenhuber, N. & Galler, R., 29 Apr 2021, 11 p.

    Research output: Other contribution › Research

  32. Published

    ‘Level‑off’ cement plugging method to cure lost circulation verified with case studies

    Elmgerbi, A., Ashena, R., Ghalambor, A., Hekmatinia, A. & Mubashir, M., 29 Apr 2021.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    Origin of strain hardening in monolithic metallic glasses

    Yuan, X., Şopu, D. & Eckert, J., 29 Apr 2021, In: Physical Review B. 103, 14, L140107.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A large-scale geomechanical and petrophysical data set measured across the Geneva Basin as part of CERN's FCCIS Mining-The-Future competition

    Haas, M., Krainz, J., Villeneuve, M., Gegenhuber, N. & Galler, R., 28 Apr 2021, 4 p.

    Research output: Other contribution › Research

  36. Published

    ETU-ZAB: Entwicklung von Ausbildungs- und Trainingsstandards für Einsätze in kritschen Untertageinfrastrukturen - ZaB-Zentrum am Berg

    Galler, R. & Hofer, P., 28 Apr 2021, Bundesministerium Landwirtschaft, Regionen und Tourismus - Wissenschaf(f)t Sicherheit: Studienband 5, www.kiras.at. Wien, p. 101-111 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Analytical Proof of Origin for Raw Materials

    Melcher, F., Dietrich, V. & Gäbler, H.-E., 27 Apr 2021, In: Minerals. 11.2021, 5, 16 p., 461.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data

    Barbosa, N. D., Greenwood, A., Caspari, E., Dutler, N. & Hollinger, K., 27 Apr 2021, In: Journal of geophysical research. 126, 5, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits

    Krawczyk, K. K., Groten, J., Glushko, O., Krivec, M., Frühwirth, M., Schulz, G., Wolf, C., Hartmann, D., Moser, M., Cordill, M. J., Stadlober, B. & Griesser, T., 27 Apr 2021, In: Chemistry of materials. 33, 8

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The "ReWaste4.0" Project - A Review

    Sarc, R., 27 Apr 2021, In: Processes : open access journal. 2021, 9, 29 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Carbon Capture and Utilization (CCU)

    Lehner, M., 26 Apr 2021

    Research output: Non-textual form › Web publication/site › Research

  42. Published

    Modelling Pasty Material Behaviour Using the Discrete Element Method

    Platzer, F. & Fimbinger, E., 26 Apr 2021, In: Multiscale science and engineering. 3, 2, p. 119-128 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Hybrid carbon spherogels: carbon encapsulation of nano-titania

    Salihovic, M., Schoiber, J., Cherevan, A., Rameshan, C., Fritz-Popovski, G., Ulbricht, M., Arnold, S., Presser, V., Paris, O., Musso, M., Hüsing, N. & Elsaesser, M. S., 25 Apr 2021, In: Chemical Communications. 57, 32, p. 3905-3908 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Implementation of a Six-Layer Smart Factory Architecture with Special Focus on Transdisciplinary Engineering Education

    Ralph, B. J., Sorger, M., Schödinger, B., Schmölzer, H.-J., Hartl, K. & Stockinger, M., 22 Apr 2021, In: Sensors. 21.2021, 9, p. 2944-2967 24 p., 9.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructure and Mechanical Properties of ZrN, ZrCN and ZrC Coatings Grown by Chemical Vapor Deposition

    Frank, F., Tkadletz, M., Czettl, C. & Schalk, N., 22 Apr 2021, In: Coatings. 11.2021, 5, p. 1-13 491.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A universal criterion for the failure threshold in slowly sheared bulk metallic glasses

    Luo, Y. S., Wang, Z., Eckert, J. & Qiao, J. W., 21 Apr 2021, In: Journal of applied physics. 129, 15, 155109.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Blast vibration reduction

    Trabi, B., Bleibinhaus, F. & Tauchner, C., 21 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Machine Learning Driven Prediction of Residual Stresses for the Shot Peening Process Using a Finite Element Based Grey-Box Model Approach

    Ralph, B. J., Hartl, K., Sorger, M., Schwarz-Gsaxner, A. & Stockinger, M., 21 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5, 2, p. 39-59 21 p., 2.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Nanoindentation in multi-modal map combinations: a correlative approach to local mechanical property assessment

    Magazzeni, C., Garner, H., Howe, I., Gopon, P., Waite, J., Rugg, D., Armstrong, D. & Wilkinson, A., 21 Apr 2021, In: Journal of Materials Research. 36

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

    Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 20 Apr 2021, In: Journal of applied polymer science. 138, 16, 50239.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Excavation and Conveying for Lunar Missions: System developments for the two fundamental steps of the ISRU chain

    Hartlieb, P., Fimbinger, E., Höber, D. & Taschner, A., 19 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers Inc., 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Blastability and Ore Grade Assessment from Drill Monitoring for Open Pit Applications

    Navarro, J., Seidl, T., Hartlieb, P., Sanchidrián, J. A., Segarra, P., Couceiro, P., Schimek, P. & Godoy, C., 17 Apr 2021, In: Rock mechanics and rock engineering. 2021, 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., 17 Apr 2021, In: Open ceramics. 6.2021, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques

    Gonzalez-Gutierrez, J., 15 Apr 2021, Reference Module in Materials Science and Materials Engineering. The Netherlands: Elsevier

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Microstructure refinement and enhanced tensile properties of Al-11Mg2Si alloy modified by erbium

    Wang, K. Y., Xiang, J., Zhao, R. D., Bi, J. L., Wu, X. F., Chen, M. H., Wu, F. F. & Eckert, J., 15 Apr 2021, In: Journal of alloys and compounds. 860, 158421.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Palaeoenvironmental reconstruction of the Konin Basin (central Poland) during lignite accumulation linked to the mid-Miocene climate optimum

    Widera, M., Bechtel, A., Chomiak, L., Maciaszek, P., Słodkowska, B., Wachocki, R., Worobiec, E., Worobiec, G. & Zieliński, T., 15 Apr 2021, In: Palaeogeography, palaeoclimatology, palaeoecology. 568, 110307.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    High resolution additive manufacturing with acrylate based vitrimers using organic phosphates as transesterification catalyst

    Rossegger, E., Höller, R., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Griesser, T. & Schlögl, S., 14 Apr 2021, In: Polymer. 221, 14 April, 7 p., 123631.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Role of Organic Phosphates and Phosphonates in Catalyzing Dynamic Exchange Reactions in Thiol-Click Vitrimers

    Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U. & Schlögl, S., 14 Apr 2021, In: Macromolecular chemistry and physics.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 13 Apr 2021, In: Journal of Materials Engineering and Performance.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Ortsaufgelöste Gegenüberstellung vom Exergieverbrauch und dem technischen erneuerbaren Exergiepotential in Österreich

    Sejkora, C., Kühberger, L. & Kienberger, T., 13 Apr 2021, 21. Klimatag: Clash of Cultures? Klimaforschung trifft Industrie!. p. 42-43 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. E-pub ahead of print

    Unusual relationship between impact toughness and grain size in a high-manganese steel

    Xie, P., Shen, S., Wu, C., LI, J. & Chen, J., 13 Apr 2021, (E-pub ahead of print) In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 89.2021, 30 October, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Beitrag der Abfallwirtschaft zum Klimaschutz anhand von Forschungsprojekten der Montanuniversität Leoben

    Friedrich, K., Pomberger, R. & Lehner, M., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Crossover-Legierungen – Innovative Aluminiumwerkstoffe für nachhaltigen Leichtbau

    Stemper, L., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Entwicklung eines nachhaltigen Kultivierungssystems für Nahrungsmittel in Metropolregionen

    Ellersdorfer, M. & Stocker, K., 12 Apr 2021, Tagungsband 21. Klimatag: Clash of Cultures? Klimaforschung trifft Industrie!. Online, p. 60-61 2 p. P05

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    SUSKULT - Wenn das Ende der Nahrungskette zum Anfang wird: Entwicklung eines nachhaltigen Kultivierungssystems für Nahrungsmittel in Metropolregionen

    Ellersdorfer, M. & Stocker, K., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Functionally graded additive manufacturing

    Pei, E., Rumana Kabir, I., Godec, D., Gonzalez-Gutierrez, J. & Nordin, A., 9 Apr 2021, Additive Manufacturing with Functionalized Nanomaterials. Amsterdam, Neterlands, p. 35-54 20 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 2021, 4, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Two-dimensional talc as a van der Waals material for solid lubrication at the nanoscale

    Vasić, B., Czibula, C. M., Kratzer, M., Ruegger Almeida Neves, B., Matkovic, A. & Teichert, C., 6 Apr 2021, In: Nanotechnology. 32.2021, 26, 11 p., 265701.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Effect of pressure and temperature on microstructure of self-assembled gradient AlxTi1−XN coatings

    Zalesak, J., Todt, J., Michalička, J., Sartory, B., Matko, I., Lessiak, M., Traxler, M., Weißenbacher, R., Pitonak, R., Gammer, C. & Keckes, J., 3 Apr 2021, In: Coatings. 11.2021, 4, 15 p., 416.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Dielectric properties of shrinkage-free poly(2-oxazoline) networks from renewable resources

    Blaschke, F., Marx, P., Hirner, S., Mühlbacher, I., Wewerka, K. & Wiesbrock, F., 2 Apr 2021, In: Polymers. 13, 8, 1263.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Size‐induced constraint effects on crack initiation and propagation parameters in ductile polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 2 Apr 2021, In: Materials. 14, 8, 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Explicit continuum scale modeling of low-salinity mechanisms

    Ott, H., Kurgyis, K., Hommel, J., Flemisch, B. & Helmig, R., 1 Apr 2021, In: Journal of Petroleum Science and Engineering. 2021, 199, 108336.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Lean Smart Maintenance Reifegradmodell zur Transformation der Instandhaltungsorganisation

    Maier, H., Schmiedbauer, O. & Biedermann, H., 1 Apr 2021, In: WING-Business. 2021, 01, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Partitioning of heavy metals in different particle-size fractions of soils from former mining and smelting locations in Austria

    Jelecevic, A., Sager, M., Vollprecht, D., Puschenreiter, M. & Liebhard, P., 1 Apr 2021, In: Eurasian journal of soil science . 10.2021, 2, p. 123-131 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    PEDOT-supported Pd nanocatalysts - oxidation of formic acid

    Nakova, A., Ilieva, M., Czibula, C., Teichert, C. & Tsakova, V., 1 Apr 2021, In: Electrochimica acta. 374, 137931.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere

    Nimmervoll, M., Mori, G. K., Schmid, A., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    A new insight to the assessment of asphaltene characterization by using fortier transformed infrared spectroscopy

    Taherian, Z., Dehaghani, A. S., Ayatollahi, S. & Kharrat, R., Apr 2021, In: Journal of Petroleum Science and Engineering. 205, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Assessing the potential of online ICP–MS analysis to optimize Ca/matrix separation using DGA Resin for subsequent isotopic analysis

    Retzmann, A., Walls, D., Miller, K., Wieser, M., Irrgeher, J. & Prohaska, T., Apr 2021, In: Monatshefte fur Chemie. 152, 4, p. 401-410 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Comprehensive thermal maturity assessment in shales: a case study on the upper cretaceous Qingshankou formation (Songliao Basin, NE China)

    Zhang, P., Misch, D., Meng, Q., Bechtel, A., Sachsenhofer, R. F., Liu, Z., Gao, F., Hu, F., Zhang, S. & Tang, B., Apr 2021, In: International Journal of Earth Sciences. 110, 3, p. 943-962 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

    Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H. & Mayer, S., Apr 2021, In: Intermetallics. 2021, 131, p. 1-10 107109.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations

    Wagner, A., Holec, D., Mayrhofer, P. H. & Bartosik, M., Apr 2021, In: Materials and Design. 2021, 202, 10 p., 109517.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40, 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

    Coleman, K., Ritter, M., Bermejo, R. & Trolier-McKinstry, S., Apr 2021, In: Journal of the European Ceramic Society. 41, 4, p. 2465-2471 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Medium-range order dictates local hardness in bulk metallic glasses

    Nomoto, K., Ceguerra, A. V., Gammer, C., Li, B., Bilal, H., Hohenwarter, A., Gludovatz, B., Eckert, J., Ringer, S. P. & Kruzic, J. J., Apr 2021, In: Materials today. 44, p. 48-57 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Role of elastic strain energy in spheroidal precipitates revisited

    Böhm, H. J., Zickler, G., Fischer, F.-D. & Svoboda, J., Apr 2021, In: Mechanics of materials. 155, April, 6 p., 103781.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Rubber Injection Molding with Quality Recognition

    Hutterer, T., Berger-Weber, G., Roman Christopher, K., Friesenbichler, W., Klutz, A., Leng, T. & Mayr, K., Apr 2021, In: Kunststoffe <München> / Kunststoffe international. 2021, 4, p. 6 - 9 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Seismic structure of the Cheb Basin from high resolution surveying – data quality assessment and first results

    Banasiak, N. & Bleibinhaus, F., Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    退火处理对激光选区激光熔化成形 Ti-6Al-4V 合金的显微组织和力学性能影响

    Wang, P., Chen, F. H., Eckert, J., Pilz, S., Scudino, S. & Prashanth, K. G., Apr 2021, In: Journal of Central South University = Zhongnan-Daxue-xuebao : yingwen-ban. 28, 4, p. 1068-1077 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Composition-dependent dynamic precipitation and grain refinement in Al-Si system under high-pressure torsion

    Jin, S., Luo, Z., An, X., Liao, X., LI, J. & Sha, G., 30 Mar 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 68, p. 199-208 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Approaches Toward In Situ Reinforcement of Organic Rubbers: Strategy and Recent Progress

    Strohmeier, L., Schrittesser, B. & Schlögl, S., 28 Mar 2021, In: Polymer reviews.

    Research output: Contribution to journal › Review article › peer-review

  95. Published

    Beethovens Tod – Folge ärztlichen Fehlverhaltens?

    Reiter, C. & Prohaska, T., 25 Mar 2021, In: Wiener medizinische Wochenschrift.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Crystal structure and oxygen nonstoichiometry of the third-order Ruddlesden-Popper phase Pr4(Ni0.9Co0.1)3O10-δ

    Berger, C., Bucher, E., Merkle, R., Maier, J. & Sitte, W., 24 Mar 2021, In: Open ceramics. 6.2021, June, 8 p., 100094.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Nanoporous Pd-Cu-Si Amorphous Thin Films for Electrochemical Hydrogen Storage and Sensing

    Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 22 Mar 2021, In: ACS Applied Energy Materials. 4, 3, p. 2672-2680 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Zr addition-dependent twin morphology evolution and strengthening response in nanostructured Al thin films

    Li, G. Y., Wang, Y. Q., Zuo, J. D., Zhang, M., He, C., Feng, X., Luan, J. H., Lu, Y., Zhang, J. Y., Cazottes, S., Kiener, D., Liu, G. & Sun, J., 19 Mar 2021, In: Materialia. 16.2021, May, 1 p., 101076.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    High-Tech-Metalle in ostalpinen Buntmetallsulfidvorkommen: geologische Faktoren ihrer Anreicherung, Verteilung und Mobilisation (drei MRI-Projekte 2015–2019)

    Angerer, T., Melcher, F., Onuk, P., Tropper, P., Volgger, A. & Gasteiger, P., 18 Mar 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 4, p. 181-192 12 p.

    Research output: Contribution to journal › Article › Research

  100. Published

    Interfacial Band Engineering of MoS2/Gold Interfaces Using Pyrimidine-Containing Self-Assembled Monolayers: Toward Contact-Resistance-Free Bottom-Contacts

    Matkovic, A., Petritz, A., Schider, G., Krammer, M., Kratzer, M., Karner-Petritz, E., Fian, A., Gold, H., Gärtner, M., Terfort, A., Teichert, C., Zojer, E., Zojer, K. & Stadlober, B., 18 Mar 2021, In: Advanced Electronic Materials. 6, 5, 6 p., 2000110.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Downhole Dynamometer Sensors for Sucker Rod Pumps

    Langbauer, C., Diengsleder-Lambauer, K. & Lieschnegg, M., 15 Mar 2021, In: IEEE sensors journal. 2021, Volume 21/6

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...302 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402