Chair of Mechanics (400)

Organisational unit: Chair

Publications / Theses

  1. 2015
  2. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  4. Published
  5. Published

    Kinetics of Interstitial Segregation in Cottrell Atmospheres and Grain Boundaries

    Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F. D., 2015, In: Philosophical magazine : Letters. 95, p. 458 465 p.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published
  8. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  11. Published
  12. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 2015, In: Philosophical magazine. 95:26, p. 2851-2865

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 883 884 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  20. Published
  21. Published
  22. 2014
  23. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published
  30. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  33. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Published
  35. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  43. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers Inc., 6813785

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: ThesisDiploma Thesis

  45. Published

    Formation of Bubbles by Hydrogen Attack and Elastic-Plastic Deformation of the Matrix

    Fischer, F. D. & Svoboda, J., 2014, In: International journal of plasticity. 63, p. 110-123

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Growth limit of carbon onions – A continuum mechanical study

    Todt, M., Bitsche, R. D., Hartmann, M., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: International journal of solids and structures. 51, p. 706-715

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  50. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published
  52. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Previous 1 2 3 4 5 6 7 8 ...14 Next