Thomas Antretter

101 - 200 out of 202Page size: 100

Publications / Theses

  1. 2014
  2. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Residual Stress Investigations in Thin Film Systems: Experiment and Simulation

    Kozic, D., Treml, R., Sartory, B., Schöngrundner, R., Kiener, D., Antretter, T., Gänser, H.-P. & Brunner, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2013
  7. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Havy Steel Plates during Accelerated Cooling

    Eßl, W., Antretter, T. & Parteder, E., 2013, In: Key engineering materials. 554-557, p. 749-763

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Determination of Uniaxial Tensile Strength of Rock Materials with Numerical Methods

    Mikl, M., Antretter, T., Gimpel, M. & Pittino, G., 2013, Proceedings of The Third International Conference on Computational Methods in Tunneling and Subsurface Engineering. p. 457-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Development and testing of a technique fort he simulation oft he rock cutting process

    Mikl, M., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, In: Key engineering materials. 554-557, p. 1147-1156

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2012
  19. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Caloric Effects in Ferroic Materials: New Concepts for Cooling: Projektantrag; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 180 p. Dresden

    Research output: Other contribution › Transfer › peer-review

  22. Published

    Convergence tests - Influence of modelling on the dynamic vibration behaviour of coaches

    Böhler, E., Antretter, T., Magerl, F. & Rosenberger, M., 2012, Generation and Propagation of Sound in Solids and Fluids - Modern Analysis Methods in Acoustics. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Development of Techniques for Rock Cutting Applications

    Mikl, M., Antretter, T. & Pittino, G., 2012, European Mechanics Society, Book of Abstracts: ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012. Holzapfel, G. A. & Ogden, R. W. (eds.). Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Einfluss der zyklischen Verformung auf das Phasenumwandlungsverhalten in Heusler Legierungen für magnetokalorische Anwendungen: Auftraggeber: Deutsche Forschungsgesellschaft; Gutachten eines Projektantrags; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 20 p.

    Research output: Other contribution › Transfer › peer-review

  29. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Finite Element Modeling of the Cyclic Wetting Mechanism in the Active Part of Wheat Awns

    Zickler, G., Ruffoni, D., Dunlop, J. W. C., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, In: Biointerphases. 7, p. 42-42

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, Proceedings of the 8th European Solid Mechanics Conference. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, In: Key engineering materials. 488-489, p. 626-629

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Macro-, Meso Scale Modeling of TRIP - Nonlinear Scale Transitions Rules

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2012, Non-Linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    Nanostructured shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Steiner, G. & Waitz, T., 2012, Structures and Systems.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation der Lagerverluste in Großmotoren und deren Validierung

    Antretter, T. (Reviewer), 2012, Graz : Eigenverlag.

    Research output: Other contribution › Transfer › peer-review

  37. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Ultrafine -grained shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Pranger, W., Steiner, G. & Waitz, T., 2012, TMS Annual.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. 2011
  42. Published

    The study of controlled cooling technology and warping of X65 heavy pipeline plate

    Zhang, D. F., Lu, J. S., Antretter, T., Lü, J. G. & Song, P., 1 Dec 2011, In: Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 37, 12, p. 1886-1891 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    A space-time concept for martensitic phase transformation based on statistical physics

    Oberaigner, E. R., Fischlschweiger, M. & Antretter, T., 4 May 2011, The 14th International ESAFORM Conference on Materials Forming: ESAFORM 2011. Menary, G. (ed.). AIP, American Inst. of Physics, Vol. 1353. p. 97-102 6 p. (AIP conference proceedings; vol. 1353).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    A mean field model for transformation induced plasticity including backstress effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Compact Paper International Symposium on Plasticity 2011. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    A Meanfield Model for Transformation Induced Plasticity Including Backstress Effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Macro- to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling . p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A multi-block-spin approach for martensitic phase transformation based on statistical physics

    Fischlschweiger, M., Oberaigner, E., Antretter, T. & Cailletaud, G., 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    A multi-block-spin-method based on statistical physics describing martensitic phase transformation

    Fischlschweiger, M., Oberaigner, E., Cailletaud, G. & Antretter, T., 2011, Technical Summaries SPIE Smart Structures/NDE 2011. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    A phenomenological mean field model for coupling phase transformation with plasticity

    Fischlschweiger, M., Cailletaud, G., Antretter, T. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 738-745

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites: Dissertation Azra Razool

    Antretter, T. (Reviewer), 2011, Wien

    Research output: Other contribution › Transfer › peer-review

  51. Published

    Martensitic Phase Transformations of Nanocrystalline NiTi Shape Memory Alloys Processed by Repeated Cold Rolling

    Peterlechner, M., Waitz, T., Gammer, C. & Antretter, T., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 634-642

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Multifunctional Shape Memory Alloys processed by SPD

    Waitz, T., Mangler, C., Antretter, T., Fischer, F.-D., Pranger, W. & Müllner, P., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Multifunctional Shape Memory Alloys Processed by SPD

    Waitz, T., Mangler, C., Steiner, G., Peterlechner, M., Antretter, T., Fischer, F. D. & Pranger, W., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Neue Modellierungskonzepte für TRIP – Tranformation Induced Plasticity

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2011, Tagungsband. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2011, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulation

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulations

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2010
  59. Published

    An Integral-equation Approach to Solve Time-dependent Heat Conduction Problems

    Oberaigner, E., Leindl, M. & Antretter, T., 2010, International Congress of Mathematics, Abstracts, Short Communications, Posters. p. 723-724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Experimental validation of microstructure evolution in crystalline materials

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, In: Journal of physics / Conference series. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Modelling and Simulation of Phase Transformation-Mechanics Coupling Using a Phase Field Method: Dissertation Kais Ammar

    Antretter, T. (Reviewer), 2010, Paris

    Research output: Other contribution › Transfer › peer-review

  62. Published

    Modelling Transformation Induced Plasticity – An Application to Heavy Steel Plates

    Antretter, T., Zhang, D. & Parteder, E., 2010, In: Steel research international. 81, p. 675-680

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Phänomenologische und mikroskopische Modellierung von Formgedächtnislegierungen: Dissertation Stefan Wilmanns

    Antretter, T. (Reviewer), 2010, Paderborn

    Research output: Other contribution › Transfer › peer-review

  64. Published

    Solution of a time-dependent thermoelastic problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2010, IWCMM20 - International Workshop on Computational Mechanics of Materials, Book of Abstracts. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    The Correlation between Grain Size and Martensite Morphology in Nano-Structured NiTi Shape Memory Alloys

    Pranger, W., Antretter, T., Waitz, T. & Fischer, F. D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Time-Dependent Heat Conduction Problems Solved by an Integral-Equation Approach

    Oberaigner, E., Leindl, M. & Antretter, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. 2009
  69. Published

    Cold and Warm Forming of Polycrystals: The Effect of Crystal Plasticity

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, & Fracture

    .     p. 319-321

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Deformation, Stress State and Thermodynamic Force for a Growing Nano-Void in an Elastic-Plastic Material

    Fischer, F. D. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 1819-1832

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Formation of Martensite Twins in Nano-Structured Nickel Titanium Alloys

    Antretter, T., Waitz, T., Pranger, W. & Fischer, F. D., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture

    .     p. 361-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Macro Modelling and Homogenization for Transformation Induced Plasticity of a Low-Alloy Steel

    Mahnken, R., Schneidt, A. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 183-204

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Phase Transformations of Nano-Crystalline Martensitic Materials

    Waitz, T., Tsuchiya, K., Antretter, T. & Fischer, F. D., 2009, In: MRS Bulletin. 34, p. 814-821

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2008
  76. Published

    Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2008, Bestimmung der lokalen Verformung in Polykristallinen Werkstoffen. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 13-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 479-483

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

    Trattnig, G., Antretter, T. & Pippan, R., 2008, In: Engineering Fracture Mechanics. 75, p. 223-235

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations

    Mahnken, R., Schneidt, A. & Antretter, T., 2008, Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations. Civil-Comp Press, p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Measurment of All Six Components of X-Ray Elastic Factors

    Ortner, B., Antretter, T., Hofmann, M. & Werner, E., 2008, In: Materials Science Forum. 571-572, p. 225-229

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Mechanics of Sheared Bands – Applications to Faults, Twins and Variants

    Fischer, F. D., Antretter, T. & Oberaigner, E., 2008, In: Mechanics of materials. 40, p. 195-205

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Size Effects on Martensitic Phase Transformations in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and technology. 24, p. 934-940

    Research output: Contribution to journal › Article › Research › peer-review

  85. 2007
  86. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, In: Key engineering materials. 345-346, p. 685-688

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Size Effects on the Martensitic Martensitic Phase Transformation of NiTi Nanograins

    Waitz, T., Antretter, T., Fischer, F. D., Simha, N. K. & Karnthaler, H.-P., 2007, In: Journal of the mechanics and physics of solids. 55, p. 419-444

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    The Morphology of Martensite in Nano-Structured NI-TI Alloys

    Antretter, T., Waitz, T. & Fischer, F. D., 2007, Proceedings of the 1st Seminar on The Mechanics of Multifunctional Materials. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. 2006
  91. Published

    On the Algorithmic Implementation of a Material Model Accounting for the Effects of Martensitic Transformation

    Antretter, T., Fischer, F. D., Cailletaud, G. & Ortner, B., 2006, In: Steel research international. 77, p. 733-740

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    The cyclic behavior of a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T., Ebner, R., Kaschnitz, E., Marsoner, S., Leindl, M. & Köberl, H., 2006, 1. Tagungsband der Leobener Betriebsfestigkeitstage. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 221-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. 2005
  94. Published

    Martensitic phase transformations of bulk nanocrystalline NiTi alloys

    Waitz, T., Karnthaler, H. P., Antretter, T. & Fischer, F. D., 1 Dec 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 2. p. 885-898 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. 2004
  96. Published

    A numerical model for Transformation Induced Plasticity (TRIP)

    Antretter, T., Fischer, F. D. & Cailletaud, G., 1 Dec 2004, In: Journal de physique / 4. 115, p. 233-241 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. 2003
  98. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Experimental and numerical investigations of the mechanics of martensitic transformation

    Antretter, T., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  100. Published

    Optimized Shape Memory Dampers Modelling and Application

    Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2003, Proceedings of the Third World Conference on Structural Control. p. 561-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2002
  102. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Theory, experiments and numerical modelling of phase transformations with emphasis on TRIP

    Antretter, T., Fischer, F. D., Tanaka, K. & Cailletaud, G., 1 Jun 2002, In: Steel research international. 73, 6-7, p. 225-235 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Diffusional Phase Transformation and Deformation in Steels

    Gamsjäger, E., Antretter, T., Schmaranzer, C., Preis, W., Chimani, C. M., Simha, N. K., Svoboda, J. & Fischer, F. D., 2002, In: Computational materials science. 50, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Simulation of the Damping of a Shape Memory Alloy Rod by using the Likhachev Model

    Pushtshaenko, O., Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2002, In: Journal of intelligent material systems and structures. 13, p. 817-823

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    The Thermo-mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Antretter, T., Fischer, F. D., Lube, T., Tanaka, K. & Cailletaud, G., 2002, In: Journal of intelligent material systems and structures. 13, 12, p. 881-815

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2001
  108. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Susceptibility to failure of the constituents of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Jan 2001, In: International Journal of Damage Mechanics. 10, 1, p. 56-72 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  110. 2000
  111. Published

    Deformation behavior of elastic-plastic materials containing instantly transforming inclusions

    Antretter, T. & Fischer, F. D., 1 Dec 2000, In: Key engineering materials. 177-180 II, p. 431-436 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    The role of backstress in phase transforming steels

    Fischer, F. D., Antretter, T., Azzouz, F., Cailletaud, G., Pineau, A., Tanaka, K. & Nagayama, K., 1 Dec 2000, In: Archives of Mechanics. 52, 4-5, p. 569-588 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    New view on transformation induced plasticity (TRIP)

    Fischer, F. D., Reisner, G., Werner, E., Tanaka, K., Cailletaud, G. & Antretter, T., 1 Jun 2000, In: International journal of plasticity. 16, 7, p. 723-748 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  114. 1998
  115. Published

    Failure mechanisms of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Materials Research Society symposium proceedings. 529, p. 151-156 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Particle cleavage and ductile crack growth in a two-phase composite on a microscale

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Computational materials science. 13, 1-3, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (202)