Shengli Jin

(Former)

1 - 108 out of 108Page size: 500

Publications / Theses

  1. 2021
  2. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A comparison of two damage models for inverse identification of mode Ⅰ fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 13 Feb 2021, In: International Journal of Mechanical Sciences. 197.2021, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    The femtosecond laser micro-processing of the field-emission tip arrays in single crystal CeB6

    Zhou, N., Zhang, W., Zhang, X., Liu, H., Liu, Q., Xiao, Y., Liu, Y., Jin, S. & Liao, N., Feb 2021, In: Vacuum. 184 , 109929.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Accepted/In press

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 2021, (Accepted/In press) In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    Experimental Investigation of the Tension and Compression Creep Behavior of Alumina-Spinel Refractories at High Temperatures

    Teixeira, L., Samadi, S., Gillibert, J., Jin, S., Sayet, T., Gruber, D. & Blond, E., 22 Sept 2020, In: Ceramics. 3.2020, 3, p. 372-383 12 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  9. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  10. Published

    Physical Modeling Evaluation on Refining Effects of Ladle with Different Purging Plug Designs

    Tan, F., He, Z., Jin, S., Pan, L., Yawei, L. & Li, B., 25 Mar 2020, In: Steel research international. 91.2020, 6, 8 p., 1900606.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of crystallization on properties and microstructure of fused quartz bricks for hot repair of coke ovens

    Wei, W., Yonghe, L., Yucheng, Y., Shengli, J., Jianhua, N., Wei, C., Jian, Z. & Cailiao, N., Jan 2020, In: Naihuo Cailiao/Refractories. 54, 1, p. 41-46 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 2226-2232 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 2020, In: Journal of the European Ceramic Society. 40, p. 4655 4663 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2019
  16. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Benefits of the addition of a structural insulation layer in the refractory lining of rotary kiln: Thermomechanical modeling and In-plant results

    Cole, D., Stover, E., Jin, S. & Rebouillat, L., 13 Oct 2019.

    Research output: Contribution to conference › Paper

  21. Published

    Effect of crystallization extent on fracture of fused silica bricks

    Wang, W., Liang, Y., Yin, Y., Nie, J. & Jin, S., 25 Sept 2019.

    Research output: Contribution to conference › Paper

  22. E-pub ahead of print

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., 12 Sept 2019, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Review article › peer-review

  23. E-pub ahead of print

    Inverse Simulation of Fracture Parameters for Cement-Bonded Corundum Refractories

    Pan, L., He, Z., Li, Y., Li, B. & Jin, S., 4 Sept 2019, (E-pub ahead of print) In: JOM. 71.2019, 11, p. 3996-4004 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Wedge-splitting test on carbon-containing refractories at high temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 1 Aug 2019, In: Applied Sciences (Switzerland). 9, 16, 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 12 Jul 2019, (E-pub ahead of print) In: Steel research international. p. ? 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  28. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Creep testing of carbon containing refractories under reducing conditions

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., 2019, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    耐火材料力学行为表征方法研究进展

    Dai, Y., Yawei, L. & Jin, S., 2019, In: Kuei Suan Jen Hsueh Pao / Journal of the Chinese Ceramic Society. 47, 8, p. 1089-1094 6 p.

    Research output: Contribution to journal › Review article › peer-review

  33. 2018
  34. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermomechanical Modelling of industrial linings

    Samadi, S. & Jin, S., Sept 2018.

    Research output: Contribution to conference › Poster › Research

  37. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  42. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2017
  45. Published

    Facile synthesis of SiOx spheres or dumbbell-shaped β-SiC whiskers on expanded graphite by silicon vapor deposition

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Wang, G. & Xu, X., 1 Nov 2017, In: Ceramics International : CI. 43, 16, p. 13282-13289 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories

    Liao, N., Li, Y., Wang, Q., Zhu, T., Jin, S., Sang, S. & Jia, D., 1 Nov 2017, In: Ceramics International : CI. 43, 16, p. 14380-14388 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Correlation between chemical composition and alkali attack resistance of bauxite-SiC refractories in cement rotary kiln

    Bo, R., Yawei, L., Shengli, J. & Shaobai, S., Nov 2017, In: Ceramics International. 43, 16, p. 14161-14167 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effects of catalysts state on the synthesis of MWCNTs modified expanded graphite through microwave-assisted pyrolysis of ethanol

    Liao, N., Li, Y., Jin, S., Liu, G., Wan, Q., Sang, S. & Su, D., 1 Oct 2017, In: Journal of materials science. 52, 19, p. 11442-11452 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Lightweight design of bauxite-SiC composite refractories as the lining of rotary cement kiln using alternative fuels

    Ren, B., Li, Y., Sang, S. & Jin, S., 1 Oct 2017, In: Ceramics International : CI. 43, 14, p. 11048-11057 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 20 Jun 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698, p. 80-87 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Enhanced formation of magnesium silica hydrates (M-S-H) using sodium metasilicate and caustic magnesia in magnesia castables

    Zhang, Y., Li, Y., Xu, Y., Sang, S. & Jin, S., 12 Apr 2017, In: Ceramics International : CI. 43.2017, 12, p. 9110-9116 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., 2017.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Combined Effects of Boron Carbide, Silicon, and MWCNTs in Alumina-Carbon Refractories on Their Microstructural Evolution

    Liao, N., Li, Y., Jin, S., Xu, Y., Sang, S. & Deng, Z., 2017, In: Journal of the American Ceramic Society. p. 443-450 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  56. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 2017, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Measurement and simulation of refractory creep and fracture

    Jin, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  58. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  59. 2016
  60. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 29 Mar 2016, In: Engineering Failure Analysis. 62, p. 254-262

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    The Influence of Al and Si Additives on the Microstructure and Mechanical Properties of Low-Carbon MgO-C Refractories

    Zhu, T., Li, Y., Jin, S. & Sang, S. B., 2016, In: Journal of ceramic science and technology. 7, 1, p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2015
  66. Published

    Catalyst-free hybridization of silicon carbide whiskers and expanded graphite by vapor deposition method

    Wang, Q., Li, Y., Jin, S. & Sang, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14359-14366

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Correlation of pore structure and alkali vapor attack resistance of bauxite-SiC composite refractories

    Ren, B., Sang Shaobai, Li Yawei & Jin, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14674-14683

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Effect of the reactivity and porous structure of expanded graphite (EG) on microstructure and properties of Al2O3-C refractories

    Wang, Q., Li, Y., Sang, S. & Jin, S., 5 Oct 2015, In: Journal of alloys and compounds. 645, p. 388-397

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Catalytic formation of one-dimensional nanocarbon and MgO whiskers in low carbon MgO-C refractories

    Zhu, T., Li, Y., Jin, S., Sang, S. & Liao, N., Apr 2015, In: Ceramics International : CI. 41, 3, p. 3541-3548

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Investigation of compressive refractory creep

    Jin, S., 2015

    Research output: Thesis › Doctoral Thesis

  74. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. 2014
  76. Published

    Formation of hollow MgO-rich spinel whiskers in low carbon MgO-C refractories with Al additives

    Zhu, T., Li, Y., Sang, S., Jin, S. & Wang, H., Dec 2014, In: Journal of the European Ceramic Society. 34, 16, p. 4425-4432

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Microstructures and mechanical properties of Al2O3-C refractories using nickel-loaded ultrafine microcrystalline graphite and silicon additives

    Wang, H., Li, Y., Sang, S., Jin, S., Xu, Y., Yang, K. & Yu, S., Dec 2014, In: Ceramics International : CI. 40, 10, p. 15783-15793

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Effect of nanocarbon sources on microstructure and mechanical properties of MgO-C refractories

    Zhu, T., Li, Y., Sang, S., Jin, S., Li, Y., Zhao, L. & Liang, X., Apr 2014, In: Ceramics International : CI. 40, 3, p. 4333-4340

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. 2013
  85. Published

    Microstructure and mechanical properties of multi-walled carbon nanotubes containing Al2O3-C refractories with addition of polycarbosilane

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L., Wang, Q. & Li, Y., Jul 2013, In: Ceramics International : CI. 39, 5, p. 4831-4838

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Surface Coating Formation on the Multi-walled Carbon Nanotubes and Its Oxidation Resistance

    Luo Ming, [. V., Li Yawei, [. V., Jin, S., Sang Shaobai, [. V. & Zhao Lei, [. V., Jan 2013, In: RARE METAL MATERIALS AND ENGINEERING. 42, 1, p. 135-139

    Research output: Contribution to journal › Article › Research › peer-review

  87. 2012
  88. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Microstructure and mechanical properties of MgO-C refractories containing expanded graphite

    Zhu, T., Li, Y., Jin, S., Sang, S., Wang, Q., Zhao, L., Li, Y. & Li, S., 27 Nov 2012, In: Ceramics International : CI. 39.2013, 4, p. 4529-4537 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Microstructural Evolution and Oxidation Resistance of Multi-walled Carbon Nanotubes in the Presence of Silicon Powder at High Temperatures

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 28, 7, p. 599-605

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Microstructural evolution of multi-walled carbon nanotubes in the presence of mixture of silicon and silica powders at high temperatures

    Li, Y., Luo, M., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: Ceramics International : CI. 38, 5, p. 4105-4110

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Thermomechanical Modelling of a Channel Induction Furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & Lemaistre, H., 2012, Proceedings of ALAFAR Congress 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Thermo-Mechanical Modelling of Steel Ladle Process Cycles

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2012, In: Interceram / Refractories manual. p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Thermomechanical Steel Ladle Simulation Including a Mohr-Coulomb Plasticity Failure Model

    Jin, S., Gruber, D., Harmuth, H. & Fréchette, M.-H., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  96. 2011
  97. Published

    Oxidation resistance of multi-walled carbon nanotubes coated with polycarbosilane-derived SiCxOy ceramic

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Dec 2011, In: Ceramics International : CI. 37, 8, p. 3055-3062

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Classification of thermomechnical impact factors and prediction model for ladle preheating

    Jin, S., Harmuth, H., Gruber, D., Auer, T. & Li, Y., 2011, In: Journal of Wuhan University of Technology. 34, 1, p. 28-31

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Thermo-mechanical Modeling of a Complete Steel Ladle Process

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2011, Refractories-Technology to Sustain the Global Environment. p. 10-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Thermo-mechanical simulation of a steel ladle process cycle with special emphasis on the preheating process

    Auer, T., Gruber, D., Harmuth, H., Jin, S. & Kronthaler, A., 2011, Refractories for Industrials. p. 39-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2010
  102. Published

    Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

    Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41A, 8, p. 2085-2092

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Properties and microstructures of blast furnace carbon refractories with Al additions

    Chen, X., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, S., Aug 2010, In: Ironmaking and steelmaking. 37, 6, p. 398-406

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Effect of Carbon Aggregates on the Properties of Carbon Refractories for a Blast Furnace

    Chen, X., Li, Y., Li, Y., Sang, S., Zhao, L., Li, S., Jin, S. & Ge, S., Apr 2010, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41, 2, p. 420-429

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2009
  106. Published

    Behavior of magnesium and silicon in the formation of MgO/AlN composite

    Li, Y., Jin, S., Liu, G., Zhang, W., Ao, J. & Li, Z., Aug 2009, In: Journal of materials science. 44, 15, p. 4155-4161

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Microstructural evolution in MgOp/AlN composites

    Li, Y. W., Jin, S. L., Li, Y. B., Zhao, L. & Li, Z. Y., Aug 2009, In: Ceramics International : CI. 35, 6, p. 2241-2247

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Effect of Temperature on the Properties and Microstructures of Carbon Refractories for Blast Furnace

    Chen, X., Li, Y., Li, Y., Jin, S., Zhao, L. & Ge, S., Jul 2009, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40A, 7, p. 1675-1683

    Research output: Contribution to journal › Article › Research › peer-review

  109. 2008
  110. Published

    Carbothermic reduction synthesis of Ti(C, N) powder in the presence of molten salt

    Chen, X., Li, Y., Li, Y., Zhu, J., Jin, S., Zhao, L., Lei, Z. & Hong, X., Jul 2008, In: Ceramics International : CI. 34, 5, p. 1253-1259

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Template formation of aluminum-magnesium hydroxide nano-branches on linear poly(ethylene imine)

    Xiang, T., Zhao, L., Li, Y., Lei, Z., Jin, S., Li, S., Li, Y. & Liang, Y., 15 Apr 2008, In: Materials letters. 62, 10-11, p. 1627-1629

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Gas-Liquid-Solid Transportation Mechanism during Directed Melt Nitridation of Al Melt

    Jin, S., Li Yawei, Y., Liu , G., Li , Y., Zhao , L. & Li , Z., Jan 2008, In: RARE METAL MATERIALS AND ENGINEERING. 37, p. 228-231

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Magnesium vapor diffusion behavior over Al molten surface in directed metal nitridation process

    Jin, S., Li , Y., Liu, G., Li , Y., Zhao, L. & Li , Z., Jan 2008, In: RARE METAL MATERIALS AND ENGINEERING. 37, 1, p. 58-61

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Microstructure and phase composition of AIN/Al composite fabricated by directed melt nitridation

    Jin, S., Li, Y., Liu, J., Li, Y., Zhao, L., Liu, X., Ni, Y. & Li, Z., 2008, HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2. Vol. 368-372. p. 977-979 (KEY ENGINEERING MATERIALS).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  115. 2007
  116. Published

    Modified directed melt nitridation of pure aluminum block using magnesium as an external dopant

    Jin, S., Li, Y., Li, Y., Zhao, L., Liu, X., Liu, J. & Li, Z., Sept 2007, In: Journal of materials science. 42, 17, p. 7311-7315

    Research output: Contribution to journal › Article › Research › peer-review

  117. 2006
  118. Published

    Formation mechanism of 21R AlN-polytypoids in aluminothermic reduction and nitridation process

    Li, Y. W., Zhou, G. H., Jin, S. L. & Li, N., Aug 2006, In: Journal of materials science. 41, 15, p. 4795-4798

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Synthesis of Mg-alpha-sialon from the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere

    Li, Y., Sang, S., Jin, S., Yang, C. & Li, N., Aug 2006, In: Journal of materials science. 41, 18, p. 5815-5819

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Support vector regression applied to materials optimization of sialon ceramics

    Liu, X., Lu, W., Jin, S., Li, Y. & Chen, N., 26 May 2006, In: Chemometrics and Intelligent Laboratory Systems. 82, 1-2, p. 8-14

    Research output: Contribution to journal › Article › Research › peer-review

  121. 2005
  122. Published

    Formation of dumbbell-shaped β-SiC whiskers in Al2O 3-ZrO2-C composite refractories

    Li, Y. W., Aneziris, C. G., Yi, X. X., Jin, S. L. & Li, N., 1 Dec 2005, In: InterCeram: International Ceramic Review. p. 20-23 4 p.

    Research output: Contribution to journal › Review article › peer-review

  123. 2004
  124. Published

    Synthesis and its microstructure of calcium hexaluminate material by reaction sintering

    Li, Y., Li, Y., Jin, S. & Li, N., 1 Oct 2004, In: Naihuo-cailiao : shuangyuekan = Refractories. 38, 5, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. 2003
  126. Published

    Sintering property and reaction process of Si3N4-Al2O2 composite in coke bed at high temperatures

    Jin, S., Li, Y. & Li, N., 1 Oct 2003, In: Naihuo-cailiao : shuangyuekan = Refractories. 37, 5, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Sintering properties and reaction process of Si3N4-Al2O3-CaO composite in coke bed at high temperatures

    Jin, S., Li, Y., Chen, T. & Li, N., 1 Jan 2003, In: Naihuo-cailiao : shuangyuekan = Refractories. 37, 3, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (108)