Rostislav Daniel

101 - 155 out of 155Page size: 100

Publications / Theses

  1. 2010
  2. Published

    Development of intrinsic and thermal components of residual stress in nanostructured thin films: Grain size dependent phenomena

    Daniel, R., Keckes, J. & Mitterer, C., 2010, Proceedings 8th European Conference on Residual Stresses. p. 15-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Effect of Grain Size on the Residual Stress State and Thermal Expansion in Magnetron Sputtered Thin Films

    Daniel, R., Holec, D., Keckes, J. & Mitterer, C., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Improvement of mechanical and tribological properties of arc evaporated Al-Cr-B-N hard coatings via multilayer architectures

    Tritremmel, C., Daniel, R. & Mitterer, C., 2010, Proceedings 12th International Conference on Plasma Surface Engineering. p. 115-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Interlayer thickness influence on the tribological response of bi-layer coatings

    Fontalvo, G., Daniel, R. & Mitterer, C., 2010, In: Tribology International. p. 108-112

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Nano-Beam X-ray Diffraction Reveals Structural and Mechanical Gradients in Nano-Crystalline Thin Films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Schoeder, S. & Burghammer, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, In: Thin solid films. 518, 8, p. 2090-2096

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

    Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films. 519, p. 1662-1667

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    The effect of pulsed biasing on the microstructure and mechanical properties of sputtered TiB2 coatings

    Grasser, S., Daniel, R. & Mitterer, C., 2010, Proceedings 12th International Conference on Plasma Surface Engineering. p. 389-389

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    The effect of pulsed biasing on the microstructure and mechanical properties of sputtered TiB2 coatings

    Grasser, S., Daniel, R. & Mitterer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermal Decomposition of Epitaxial Al-Cr-N Hard Coatings: Crystallography and Mechanical State of Individual Phases

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In: Scripta materialia. 62, p. 774-777

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2009
  17. Published

    Crack initiation and growth in Chromium Nitride coated tool-steel

    Endler, S. B., Daniel, R., Ebner, R. & Kolednik, O., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Elastic constants of fibre-textured thin films determined by X-ray diffraction

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2009, In: Journal of applied crystallography. 42, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructural evolution during growth of polycrystallin CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Microstructural evolution during growth of polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Microstructure related stress state in magnetron sputtered thin films

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring Meeting. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Novel technique to determine elastic constants of thin films

    Martinschitz, K., Daniel, R., Mitterer, C. & Keckes, J., 2009, Material Research Society Symposium Proceedings 1139. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Novel technique to determine elastic constants of thin films

    Daniel, R., Keckes, J., Martinschitz, K. J. & Mitterer, C., 2009, In: Materials Research Society symposium proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Texture development in polycrystalline CrN coatings: the role of growth conditions and a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009, In: Journal of physics / D, Applied physics. p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    The origin of stresses in magnetron sputtered thin films

    Daniel, R., Mitterer, C., Martinschitz, K. J. & Keckes, J., 2009, Proceedings of 4th International Conference on Surface, coatings and Nanostructured Materials. p. 44-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. 2008
  27. Published

    High-temperature characterization of three-dimensional distribution of residual stresses in Crn coatings on steel

    Martinschitz, K. J., Kirchlechner, C., Keckes, J., Daniel, R. & Mitterer, C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Mechanical properties and deformation of CrN and Cr/CrN coatings during nanoindentation: Experiments and theoretical calculations

    Daniel, R., Herrmann, M., Richter, F. & Mitterer, C., 2008, 35th International Conference on Metallurgical Coatings and Thin Films. p. 109-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Residual stresses in thermally cycled CrN coatings on steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 517, p. 1167-1171

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Stress evolution in CrN/Cr coating systems during thermal straining

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 516, p. 1972-1976

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Structure and thermal stability of arc evaporated (Ti0.33Al0.67)1-xSixN thin films

    Flink, A., Andersson, J. M., Alling, B., Daniel, R., Sjölen, J., Karlsson, L. & Hultmann, L., 2008, In: Thin solid films. 517, p. 714-721

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Temperature dependence of residual stress gradients in shot-peened steel coated with CrN

    Daniel, R., Keckes, J., Kirchlechner, C., Maier, G., Martinschitz, K. J. & Mitterer, C., 2008, In: Materials Science Forum.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Temperature Dependence of Residual Stress Gradients in Shot-Peened Steel Coated with CrN

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C. & Keckes, J., 2008, Stress evaluation in materials using neutrons and synchrotron radiation : selected, peer reviewed papers from the International Conference on Stress Evaluation Using Neutrons and Synchrotron Radiation proceedings, Vienna 24 – 26 September 2007 . Pyzalla, A. R. (ed.). Stafa-Zurich [u.a.] : Trans Tech Publications : TTP, p. 101-106 (Materials Science Forum; vol. 571/572 ).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. 2007
  36. Published

    Christian Doppler Laboratory for Advanced Hard Coatings - 4 Poster

    Rebelo De Figueiredo, M., Pohler, M., Tritremmel, C., Franz, R., Daniel, R. & Mitterer, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Crack initiation and growth in CrN coated tool steels

    Daniel, R., Endler, S., Ebner, R. & Kolednik, O., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Damage evolution in a chromium nitride coated tool steel under monotonic and cyclic loading

    Endler, S. B., Daniel, R., Schöngrundner, R., Ebner, R. & Kolednik, O., 2007, International Symposium on Reactive Sputter Deposition. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Development of texutre in polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    FEM simulation of the effect of surface roughness on nanoindentation of thin films with a spherical indenter

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, 34th International Conference on Metallurgical Coatings and Thin Films. p. 60-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method

    Keckes, J., Eiper, E., Martinschitz, K. J., Köstenbauer, H., Daniel, R. & Mitterer, C., 2007, In: Review of scientific instruments. 78, p. 036103-01-036103-03

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Nanocomposite CrC/a-C:H coatings for automative applications

    Mitterer, C., Gassner, G., Scheu, C., Lechtahler, M., Mayrhofer, P. H. & Daniel, R., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Nanoindentation characterization of a Cr/CrN dual layer coating system

    Daniel, R. & Mitterer, C., 2007, 3rd International Indentation Workshop. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Residual stresses in thermally cycled Cr-crN coatings on Si(100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Thermal Stability of Sputtered W-Si-N Coatings

    Fadenberger, K., Rebholz, C., Baker, M. A., Daniel, R., Musil, J., Mayrhofer, P. H. & Mitterer, C., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2006
  50. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of Interlayer Thickness on Mechanical Properties of a Cr/CrN Dual Layer Coating System: Structure-Property Relations

    Daniel, R., Herrmann, M., Richter, F., Keckes, J. & Mitterer, C., 2006, 10th International Conference on Plasma Surface Engineering. p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Influence of Pulsed Substrate Bias on the Structure and Properties of CrN Coatings Deposited by Reactive DC Magnetron Sputtering

    Grasser, S., Gassner, G., Walter, C., Daniel, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Interlayer thickness influence in the tribological response of dual-layer coatings

    Fontalvo, G., Keckes, J., Daniel, R. & Mitterer, C., 2006, 33rd International Conference on Metallurgical Coatings and Thin Films. p. 178-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Optimized Performance of CrN Coatings via a Cr Interlayer With Specific Thickness: Structure-Property Relations

    Daniel, R., Fontalvo, G., Keckes, J. & Mitterer, C., 2006, Thin Film 2006. p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Properties of reactively sputtered W-Si-N films

    Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Rapid determination of stress factors and absolute residual stresses in thin films

    Martinschitz, K. J., Eiper, E., Massl, S., Köstenbauer, H., Daniel, R., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, In: Journal of applied crystallography. 39, p. 777-783

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Thermal stability of magnetron sputtered Zr–Si–N films

    Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2005
  59. Published

    Beschichtung / Charakterisierung

    Rebelo De Figueiredo, M., Franz, R., Daniel, R., Neidhardt, J. & Mitterer, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Structure and properties of magnetron sputtered Zr-Si-N films with a high (≥25 at.%) Si content

    Musil, J., Daniel, R., Zeman, P. & Takai, O., 2005, In: Thin solid films.

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2003
  62. Published

    Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films

    Musil, J. & Daniel, R., 2003, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 4228

Latest Research Output

View more (155)