Rostislav Daniel

Publications / Theses

  1. 2021
  2. Published

    Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction

    Hlushko, K., Mackova, A., Zalesak, J., Burghammer, M., Davydok, A., Krywka, C., Daniel, R., Keckes, J. & Todt, J., 7 Feb 2021, In: Thin solid films. 722.2021, 31 March, 6 p., 138571.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 2021, 100, p. 91-100

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Influence of the silver content on mechanical properties of Ti-Cu-Ag thin films

    Rashid, S., Sebastiani, M., Mughal, Z. M., Daniel, R. & Bemporad, E., 2021, In: Nanomaterials. 2021, p. 1-14

    Research output: Contribution to journalArticleResearchpeer-review

  5. 2020
  6. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC –Co

    Meindlhumer, M., Jäger, N., Spor, S., Rosenthal, M., Keckes, J., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 29 Feb 2020, In: Scripta materialia. 182.2020, June, p. 11-15 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. E-pub ahead of print

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, (E-pub ahead of print) In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  11. 2019
  12. Published
  13. Published

    Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy

    Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition

    Jäger, E., Schmidt, J., Pfuch, A., Spange, S., Beier, O., Jäger, N., Jantschner, O., Daniel, R. & Mitterer, C., Feb 2019, In: Nanomaterials. 9.2019, 2, p. 1-14 14 p., 255.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2018
  19. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published
  21. Published

    Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis

    Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, In: Materials and Design. 145, p. 55-64

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published
  23. 2017
  24. Published

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 2017, In: Materials characterization. 128, p. 257–268

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M., Mitterer, C. & Keckes, J., 2017, In: Acta materialia. 122, p. 130-137 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published
  27. Published
  28. Published

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 2017, In: Acta materialia. 131, p. 391-399

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 2017, In: AIP Advances. 7, p. 035307-1 35307 p.

    Research output: Contribution to journalArticleResearchpeer-review

  30. 2016
  31. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced Engineering Materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published
  33. Published
  34. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae

    Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R. & Keckes, J., 2016, In: Journal of applied crystallography. 49, 6, p. 2217-2225 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

    Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published
  41. Published
  42. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published
  44. Published
  45. Published
  46. Published

    X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

    Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. 2015
  48. Published
  49. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P. H., 2015, In: Acta Materialia.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P., 2015, In: Acta materialia. 83, p. 276-284

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Mechanical property enhancement in laminates through control of morphology and crystal orientation

    Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  53. Published

    Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

    Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  55. Published
  56. Published

    Nitrogen atom shift and the structural change in chromium nitride

    Wan, P., Zhang, Z., Holec, D., Daniel, R., Mitterer, C. & Duan, H., 2015, In: Acta materialia. 98, p. 119-127

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior

    Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  58. Published

    Resolving depth evolution of microstructure and hardness in sputtered CrN film

    Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films

    Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  60. Published

    The peculiarity of the metalceramic interface

    Zhang, Z., Long, Y., Cazottes, S., Daniel, R., Mitterer, C. & Dehm, G., 2015, In: Scientific reports (London : Nature Publishing Group). p. 1-12

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journalArticleResearchpeer-review

  62. 2014
  63. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending

    Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 1 Jan 2014, Materials Science Forum. Vol. 768-769. p. 272-279 8 p. (Materials Science Forum; vol. 768-769).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  65. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Controlled functionality of thin films through advanced microstructural design

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  67. Published
  68. Published

    Funktionale Schichten für das Automobil

    Mitterer, C., Saringer, C., Franz, R., Jantschner, O., Terziyska, V. & Daniel, R., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  69. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journalArticleResearchpeer-review

  70. Published
  71. Published

    Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films

    Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  72. Published

    Novel nanocomposite coatings: Advances and industrial applications

    Daniel, R. & Musil, J., 2014

    Research output: Book/ReportBookResearch

  73. Published
  74. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journalArticleResearchpeer-review

  75. 2013
  76. Published

    Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction

    Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  77. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published

    Influence of Al and Si content on structure and mechanical properties of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Pocik, P. & Mitterer, C., 2013, In: Thin solid films. 534, p. 403-409

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published

    Novel TiAlN nanostructured CVD coatings with superior oxidation resistance

    Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  81. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journalArticleResearchpeer-review

  82. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    Using pulsed and modulated photothermal radiometry to measure the thermal conductivity of thin films

    Kusiak, A., Martan, J., Battaglia, J.-L. & Daniel, R., 2013, In: Thermochimica Acta. 556, p. 1-5

    Research output: Contribution to journalArticleResearchpeer-review

  85. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journalArticleResearchpeer-review

  86. 2012
  87. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Design and architecture of functional materials systems

    Daniel, R., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  89. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published

    Mesure de la conductivite thermique des couches de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  91. Published

    Mesure de la conductivite thermique d'une couche de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012, Congres francais de thermique. p. 108-114

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published

    Oxidation behavior of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Mitterer, C., Mayrhofer, P. H., Lechthaler, M. & Polcik, P., 2012, In: Journal of vacuum science & technology / A (JVST). 30, p. 061501-1-061501-6

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction

    Daniel, R., Keckes, J. & Mitterer, C., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  96. Published

    TEM characterization of CrN thin films epitaxially grown on MgO (001)

    Harzer, T. P., Kormout, K., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  97. Published

    Thermally treated hard coatings characterized by XRD coupled with four-point bending

    Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  98. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journalArticleResearchpeer-review

  99. 2011
  100. Published

    Advanced characterisation of the Cu-MgO interface structure by Cs-corrected high-resolution transmission electron microscopy

    Zhang, Z., Daniel, R., Dehm, G. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  101. Published

    Atomic and electronic characterization on the CrN/Cr/Si interfaces using CS-corrected HRTEM

    Zhang, Z., Daniel, R. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  102. Published

    Atomic and electronic structures of a transition layer at the CrN/Cr interface

    Zhang, Z., Daniel, R. & Mitterer, C., 2011, In: Journal of applied physics. 110, p. 043524-1-043524-4

    Research output: Contribution to journalArticleResearchpeer-review

  103. Published

    Comparative studies of the CrN-Cr-Si an d CrN-Si interfaces by Cs-corrected HRTEM and STEM-EELS

    Zhang, Z., Daniel, R. & Mitterer, C., 2011, Proceeding of Multinational Congress on Microscopy. p. 29-30

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  104. Published

    Comparative studies of the CrN-Cr-Si an d CrN-Si interfaces by Cs-corrected HRTEM and STEM-EELS

    Zhang, Z., Daniel, R. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  105. Published

    Concept for optimized coating design and architecture

    Daniel, R. & Mitterer, C., 2011, Abstract International conference on Potential and Applications of Thin Ceramic and Metal Coatings. p. 37-40

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  106. Published

    Nano-Beam X-ray Diffraction as a Tool to Characterize Gradients of Microstructure and Residual Stress in Nanocrystalline Hard Coatings

    Bartosik, M., Daniel, R., Mitterer, C., Schoeder, S., Burghammer, M. & Keckes, J., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  107. Published

    Nano-beam-x-ray diffraction reveals strain, composition, texture and crystal size gradients across nano-crystalline thin films

    Keckes, J., Daniel, R., Bartosik, M., Mitterer, C., Schoeder, S. & Burghammer, M., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  108. Published
  109. Published

    Stress design of hard coatings

    Daniel, R., Keckes, J. & Mitterer, C., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  110. 2010
  111. Published

    A Numerical study on the fatigue resistance of a coated tool steel

    Schöngrundner, R., Endler, S. B., Daniel, R., Ebner, R., Mitterer, C. & Kolednik, O., 2010, Proceedings of 18th European Conference of Fractue. p. 1-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  112. Published

    Atomic Structure Characterization of Cu/MgO(001) Interfaces by CS-Corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Gall, D. G. & Dehm, G., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 14-14

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  113. Published

    Development of intrinsic and thermal components of residual stress in nanostructured thin films: Grain size dependent phenomena

    Daniel, R., Keckes, J. & Mitterer, C., 2010, Proceedings 8th European Conference on Residual Stresses. p. 15-15

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  114. Published

    Effect of Grain Size on the Residual Stress State and Thermal Expansion in Magnetron Sputtered Thin Films

    Daniel, R., Holec, D., Keckes, J. & Mitterer, C., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  115. Published

    Improvement of mechanical and tribological properties of arc evaporated Al-Cr-B-N hard coatings via multilayer architectures

    Tritremmel, C., Daniel, R. & Mitterer, C., 2010, Proceedings 12th International Conference on Plasma Surface Engineering. p. 115-115

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  116. Published

    Interlayer thickness influence on the tribological response of bi-layer coatings

    Fontalvo, G., Daniel, R. & Mitterer, C., 2010, In: Tribology International. p. 108-112

    Research output: Contribution to journalArticleResearchpeer-review

  117. Published

    Nano-Beam X-ray Diffraction Reveals Structural and Mechanical Gradients in Nano-Crystalline Thin Films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Schoeder, S. & Burghammer, M., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  118. Published

    Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, In: Thin solid films. 518, 8, p. 2090-2096

    Research output: Contribution to journalArticleResearchpeer-review

  119. Published

    Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films.

    Research output: Contribution to journalArticleResearchpeer-review

  120. Published

    Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

    Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films. 519, p. 1662-1667

    Research output: Contribution to journalArticleResearchpeer-review

  121. Published

    The effect of pulsed biasing on the microstructure and mechanical properties of sputtered TiB2 coatings

    Grasser, S., Daniel, R. & Mitterer, C., 2010, Proceedings 12th International Conference on Plasma Surface Engineering. p. 389-389

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  122. Published

    The effect of pulsed biasing on the microstructure and mechanical properties of sputtered TiB2 coatings

    Grasser, S., Daniel, R. & Mitterer, C., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  123. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journalArticleResearchpeer-review

  124. Published

    Thermal Decomposition of Epitaxial Al-Cr-N Hard Coatings: Crystallography and Mechanical State of Individual Phases

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  125. Published
  126. Published

    X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In: Scripta materialia. 62, p. 774-777

    Research output: Contribution to journalArticleResearchpeer-review

  127. 2009
  128. Published

    Crack initiation and growth in Chromium Nitride coated tool-steel

    Endler, S. B., Daniel, R., Ebner, R. & Kolednik, O., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  129. Published

    Elastic constants of fibre-textured thin films determined by X-ray diffraction

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2009, In: Journal of applied crystallography. 42, p. 1-13

    Research output: Contribution to journalArticleResearchpeer-review

  130. Published

    Microstructural evolution during growth of polycrystallin CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  131. Published

    Microstructural evolution during growth of polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring. p. 9-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  132. Published

    Microstructure related stress state in magnetron sputtered thin films

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring Meeting. p. 25-25

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  133. Published

    Novel technique to determine elastic constants of thin films

    Martinschitz, K., Daniel, R., Mitterer, C. & Keckes, J., 2009, Material Research Society Symposium Proceedings 1139. p. 115-120

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  134. Published

    Novel technique to determine elastic constants of thin films

    Daniel, R., Keckes, J., Martinschitz, K. J. & Mitterer, C., 2009, In: Materials Research Society symposium proceedings.

    Research output: Contribution to journalArticleResearchpeer-review

  135. Published

    Texture development in polycrystalline CrN coatings: the role of growth conditions and a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009, In: Journal of physics / D, Applied physics. p. 1-13

    Research output: Contribution to journalArticleResearchpeer-review

  136. Published

    The origin of stresses in magnetron sputtered thin films

    Daniel, R., Mitterer, C., Martinschitz, K. J. & Keckes, J., 2009, Proceedings of 4th International Conference on Surface, coatings and Nanostructured Materials. p. 44-44

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  137. 2008
  138. Published

    High-temperature characterization of three-dimensional distribution of residual stresses in Crn coatings on steel

    Martinschitz, K. J., Kirchlechner, C., Keckes, J., Daniel, R. & Mitterer, C., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  139. Published

    Mechanical properties and deformation of CrN and Cr/CrN coatings during nanoindentation: Experiments and theoretical calculations

    Daniel, R., Herrmann, M., Richter, F. & Mitterer, C., 2008, 35th International Conference on Metallurgical Coatings and Thin Films. p. 109-109

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  140. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  141. Published

    Residual stresses in thermally cycled CrN coatings on steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 517, p. 1167-1171

    Research output: Contribution to journalArticleResearchpeer-review

  142. Published

    Stress evolution in CrN/Cr coating systems during thermal straining

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 516, p. 1972-1976

    Research output: Contribution to journalArticleResearchpeer-review

  143. Published

    Structure and thermal stability of arc evaporated (Ti0.33Al0.67)1-xSixN thin films

    Flink, A., Andersson, J. M., Alling, B., Daniel, R., Sjölen, J., Karlsson, L. & Hultmann, L., 2008, In: Thin solid films. 517, p. 714-721

    Research output: Contribution to journalArticleResearchpeer-review

  144. Published
  145. Published

    Temperature Dependence of Residual Stress Gradients in Shot-Peened Steel Coated with CrN

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C. & Keckes, J., 2008, Stress evaluation in materials using neutrons and synchrotron radiation : selected, peer reviewed papers from the International Conference on Stress Evaluation Using Neutrons and Synchrotron Radiation proceedings, Vienna 24 – 26 September 2007 . Pyzalla, A. R. (ed.). Stafa-Zurich [u.a.] : Trans Tech Publications : TTP, p. 101-106 (Materials Science Forum; vol. 571/572 ).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  146. 2007
  147. Published

    Christian Doppler Laboratory for Advanced Hard Coatings - 4 Poster

    Rebelo De Figueiredo, M., Pohler, M., Tritremmel, C., Franz, R., Daniel, R. & Mitterer, C., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  148. Published

    Crack initiation and growth in CrN coated tool steels

    Daniel, R., Endler, S., Ebner, R. & Kolednik, O., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  149. Published

    Damage evolution in a chromium nitride coated tool steel under monotonic and cyclic loading

    Endler, S. B., Daniel, R., Schöngrundner, R., Ebner, R. & Kolednik, O., 2007, International Symposium on Reactive Sputter Deposition. p. 53-53

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  150. Published

    Development of texutre in polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  151. Published

    FEM simulation of the effect of surface roughness on nanoindentation of thin films with a spherical indenter

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, 34th International Conference on Metallurgical Coatings and Thin Films. p. 60-60

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  152. Published
  153. Published

    High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method

    Keckes, J., Eiper, E., Martinschitz, K. J., Köstenbauer, H., Daniel, R. & Mitterer, C., 2007, In: Review of scientific instruments. 78, p. 036103-01-036103-03

    Research output: Contribution to journalArticleResearchpeer-review

  154. Published

    Nanocomposite CrC/a-C:H coatings for automative applications

    Mitterer, C., Gassner, G., Scheu, C., Lechtahler, M., Mayrhofer, P. H. & Daniel, R., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 113-113

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  155. Published

    Nanoindentation characterization of a Cr/CrN dual layer coating system

    Daniel, R. & Mitterer, C., 2007, 3rd International Indentation Workshop. p. 36-36

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  156. Published

    Residual stresses in thermally cycled Cr-crN coatings on Si(100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  157. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  158. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  159. Published

    Thermal Stability of Sputtered W-Si-N Coatings

    Fadenberger, K., Rebholz, C., Baker, M. A., Daniel, R., Musil, J., Mayrhofer, P. H. & Mitterer, C., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 36-36

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  160. 2006
  161. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journalArticleResearchpeer-review

  162. Published

    Influence of Interlayer Thickness on Mechanical Properties of a Cr/CrN Dual Layer Coating System: Structure-Property Relations

    Daniel, R., Herrmann, M., Richter, F., Keckes, J. & Mitterer, C., 2006, 10th International Conference on Plasma Surface Engineering. p. 185-185

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  163. Published
  164. Published

    Interlayer thickness influence in the tribological response of dual-layer coatings

    Fontalvo, G., Keckes, J., Daniel, R. & Mitterer, C., 2006, 33rd International Conference on Metallurgical Coatings and Thin Films. p. 178-178

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  165. Published

    Optimized Performance of CrN Coatings via a Cr Interlayer With Specific Thickness: Structure-Property Relations

    Daniel, R., Fontalvo, G., Keckes, J. & Mitterer, C., 2006, Thin Film 2006. p. 199-199

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  166. Published

    Properties of reactively sputtered W-Si-N films

    Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.

    Research output: Contribution to journalArticleResearchpeer-review

  167. Published

    Rapid determination of stress factors and absolute residual stresses in thin films

    Martinschitz, K. J., Eiper, E., Massl, S., Köstenbauer, H., Daniel, R., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, In: Journal of applied crystallography. 39, p. 777-783

    Research output: Contribution to journalArticleResearchpeer-review

  168. Published

    Thermal stability of magnetron sputtered Zr–Si–N films

    Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376

    Research output: Contribution to journalArticleResearchpeer-review

  169. 2005
  170. Published

    Beschichtung / Charakterisierung

    Rebelo De Figueiredo, M., Franz, R., Daniel, R., Neidhardt, J. & Mitterer, C., 2005.

    Research output: Contribution to conferencePosterResearchpeer-review

  171. Published

    Structure and properties of magnetron sputtered Zr-Si-N films with a high (≥25 at.%) Si content

    Musil, J., Daniel, R., Zeman, P. & Takai, O., 2005, In: Thin solid films.

    Research output: Contribution to journalArticleResearchpeer-review

  172. 2003
  173. Published

    Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films

    Musil, J. & Daniel, R., 2003, In: Surface & coatings technology.

    Research output: Contribution to journalArticleResearchpeer-review