Ralf Schledjewski

(Former)

101 - 200 out of 206Page size: 100

Publications / Theses

  1. 2016
  2. Published

    BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION

    Hueber, C., Horejsi, K. & Schledjewski, R., Jun 2016, Proceeding of the 17th European Conference on Composite Materials. Munich/ Germany

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  4. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 20 Apr 2016, In: Science and Engineering of Composite Materials.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms

    Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.

    Research output: Contribution to conference › Paper

  10. 2015
  11. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Hocheffiziente Prozesse: Materialverständnis und Automation als SchlüsselelementeEine Fallbetrachtung

    Schledjewski, R., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Transfer

  13. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Automated Composite Manufacturing by Means of Model Based Process Control

    Schledjewski, R. & Fauster, E., 24 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Integrated Process Development as a Basis of Highly Efficient FRPC-Processing

    Schledjewski, R., 12 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments

    Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  19. Published

    Numerical Filling Predictions and Mechanical Mould Simulations for Composite Manufacturing Techniques

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 17 Apr 2015, ESAFORM 2015, Graz, Österreich, 15.-17.04.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Forming of fiber reinforced polymers

    Schledjewski, R., 16 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Material performance under in situ consolidation conditions during continuous placement processing

    Schledjewski, R., Satheesh, B. & Tonejc, M., 4 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    An Evaluation of the Reproducibility of Capacitive Sensor Based In-Plane Permeability Measurements: A Benchmarking Study

    Grössing, H., Schledjewski, R., Kaufmann, S., Mitschang, P. & Becker, D., 2015, In: Express Polymer Letters. 9, p. 129-142

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Compaction behavior of continuous carbon fiber tows: An experimental analysis

    Kastanis, D., Schledjewski, R., Steiner, H. & Fauster, E., 2015, In: Advanced Manufacturing: Polymer and Composites Science. 1, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Enabling RTM processing of components with varying wall thickness: Accurate transverse Permeability measurements under unsaturated flow conditions

    Konstantopoulos, S., Hergan, P., Grössing, H. & Schledjewski, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Exploiting temperature measurements for cure monitoring of FRP composites. Applications with thermocouples and Infrared thermography

    Konstantopoulos, S., Tonejc, M., Maier, A. & Schledjewski, R., 2015, In: Journal of Reinforced Plastics and Composites. 34, 12, p. 1015 1026 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Numerical Filling Predictions and Mechanical Mold Simulations for Composite Manufacturing Techniques: RTM Tool Development

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 2015, In: Key engineering materials. 651-653, p. 423-432

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2014
  34. Published

    Development & modeling of novel roving impregnation process inside closed sinusoidal cavity

    Miaris, A., Mitschang, P. & Schledjewski, R., 1 Jul 2014, In: SAMPE journal : official journal of the Society for the Advancement of Material and Process Engineering . 50, 4, p. 34-44 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe

    Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Automatisierte Legeverfahren

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Bearbeitung, Oberflächenbehandlung

    Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Christian Doppler Laboratory for High Efficient Composite Processing

    Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS

    Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Defect depth determination in a CFRP structure using TSR technique

    Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014

    Research output: Non-textual form › Web publication/site › Research

  43. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    FRP parts in aircraft development: design-to-cost approaches

    Horejsi, K. & Schledjewski, R., 2014, Proceedings of THE 22ND ANNUAL INTERNATIONAL CONFERENCE ON COMPOSITE ENGINEERING. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Glass Covered Magnetic Micro-Wires Operating in the Domain Wall Nucleation and Propagation Sensing Mode for Stress Detection in FRP Composite Structures

    Konstantopoulos, S., Potirakis, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Kontinuierliches Schweißen unidirektional faserverstärkter Tapes – Wie kann die Bindungsqualität bewertet werden?

    Schledjewski, R., 2014, Online Proceedings 4a Technologietag 2014. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Kosteneffiziente Verbundbauteilgestaltung in der Luftfahrt – Methoden und Modelle zur Kostenschätzung

    Hueber, C., Horejsi, K. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium : 13. - 14. November 2014. Schledjewski, R. (ed.). p. 155-167 (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Kritische Betrachtung von LCM Füllsimulationen: Abgleich des realen Prozesses mit numerischen Vorhersagen

    Grössing, H., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 7-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. p. 193-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

    Maier, A., Schmidt, R., Oswald-Tranta, B. & Schledjewski, R., 2014, In: Materials. 7, p. 413-429

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Prepregs

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  55. Published

    Production method evaluation for large cylindrical composite parts under a cost perspective

    Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Pultrusionsverfahren

    Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes

    Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications

    Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Wickel- und Tapelegetechnik

    Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  60. 2013
  61. Published

    Accurate 2d permeability measurement: Optical permeability characterization

    Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    An adaptive modular monitoring & control system for composites manufacturing processes

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, In: JEC Composites Magazine. 81, May-June, p. 60-62

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 8439-8446

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    CULT – Hybrider Leichtbau mit ganzheitlichem Ansatz am Beispiel “CULT” (Cars’ Ultra Light Technologies)

    Schledjewski, R., 2013, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. 2013, 2, p. 85-85

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Economic investigation of impact damage using non-destruction thermography analysis on structural automotive parts

    Maier, A., Schledjewski, R. & Oswald-Tranta, B., 2013, ICSAAM 2013. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    High efficient composite processing

    Schledjewski, R., 2013, ICSAAM 2013. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing

    Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems

    Grishchuk, S. & Schledjewski, R., 2013, Carbon Nanotube Enhanced Aerospace Composite Materials. p. 99-154

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  73. Published

    Moulds for continuous fiber reinforced polymer Composites

    Schledjewski, R., 2013, Mould-Making Handbook. p. 200-239

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  74. Published

    Multifunktionale Oberflächen und Grenzflächen in Verbundwerkstoffen: Online Erfassung von Kompaktierung, Imprägnierung und Aushärtegrad

    Kastanis, D. & Schledjewski, R., 2013, 22. Leobener Kunststoff-Kolloquium „Oberflächen und Grenzflächen in der Polymertechnologie“. p. 168-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Optical permeability measurement of NCF: Influence of material properties on the 2d preform permeability

    Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 5802-5809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Parametric study on processing parameters and resulting part quality through thermoplastic placement process

    Khan, M. A., Mitschang, P. & Schledjewski, R., 2013, In: Journal of composite materials. 47, p. 485-499

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Simulation of the tape-laying process for thermoplastic matrix composites

    Narnhofer, M., Schledjewski, R., Mitschang, P. & Perko, L., 2013, In: Advances in Polymer Technology. 32, p. E705-E713

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Thermal degradation analysis of short-time heated polymers

    Bayerl, T., Brzeski, M., Martínez-Tafalla, M., Schledjewski, R. & Mitschang, P., 2013, In: Journal of thermoplastic composite materials. p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Uncertainty analysis for optical permeability measurement of reinforcing textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. 2012
  83. Published

    A Model-Based Processing Concept for Thermoplastic Tape Placement

    Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management

    Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    CFD Simulations of a hot gas torch for the thermoplastic tape placement process

    Narnhofer, M., Pazour, P. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    COMPARISON OF PERMEABILITY MEASUREMENTS OF SEVERAL FIBRE TEXTILES USING DIFFERENT MEASUREMENT METHODS

    Grössing, H., Wolfahrt, M., Müller, A. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Filament winding process in thermoplastics

    Schledjewski, R., 2012, Manufacturing techniques for polymer matrix composite (PMCs). p. 182-208

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  88. Published

    Induction heating of thermoplastic materials by particulate heating promoters

    Bayerl, T., Schledjewski, R. & Mitschang, P., 2012, In: Polymers & Polymer Composites (Polymers and polymer composites). 20, p. 333-342

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Montanuniversität Leoben: Kolloquium Polymerer Leichtbau

    Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung

    Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Simulation of materials behaviour during in-situ consolidation using continuous welding processes like thermoplastic tape placement

    Schledjewski, R., Khan, M. A. & Mitschang, P., 2012, Proceedings ECCOMAS2012. p. 4298-4307

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Simulation of the thermoplastic tape placement

    Maurer, D., Khan, M. A., Mitschang, P. & Schledjewski, R., 2012, Proceedings 4th European Conference on Materials and Structures in Aerospace – EUCOMAS 2012. p. 1-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Vielfältige Möglichkeiten und immer noch große Herausforderungen

    Schledjewski, R., 2012, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-4

    Research output: Contribution to journal › Article › Research › peer-review

  96. 2011
  97. Published

    20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau

    Schledjewski, R. (Editor), 2011, Leoben: Eigenverlag. (Schriftenreihe Kunststofftechnik Leoben; vol. 1)

    Research output: Book/Report › Book › Research

  98. Published

    Controlled influence of component properties using hybrid techniques by combining different lightweight structures

    Holschuh, R., Mitschang, P. & Schledjewski, R., 2011, Proc. 18th International Conference on Composite Materials (ICCM). p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Cost comparison of different thermoplastic and thermoset filament winding processes

    Mack, J., Schledjewski, R. & Mitschang, P., 2011, SAMPE International Symposium Proceedings. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 199-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Future Fusion

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. p. 36-36

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    MODELING THE IMPREGNATION PROCESS OF A SIPHON IMPREGNATION SYSTEM DURING FILAMENT WINDING

    Miaris, A., Päßler, M., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Online consolidation process optimization by means of process simulation

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, THEPLAC 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Processing and properties of glass/polypropylene in long fibre compounding extrusion

    Schledjewski, R. & Priebe, M., 2011, In: Plastics, rubber and composites. 40, p. 374-379

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textiles

    Schledjewski, R., Pohl, T., Bierer, M., Natter, E., Madsen, B. & Hoydonckx, H., 2011, In: Plastics, rubber and composites. 40, p. 294-299

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (206)