Ralf Schledjewski

(Former)

1 - 206 out of 206Page size: 500

Publications / Theses

  1. 2024
  2. Published

    Manufacturing bio-based fiber-reinforced polymer composites: process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10, 1, 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., Mar 2023, In: Journal of composites science. 7, 3, 122.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A COMPARATIVE STUDY ON MANUFACTURING TECHNIQUES FOR PRODUCTION OF SUSTAINABLE RECYCLATE SANDWICH COMPOSITES

    Ravindran, B., Feuchter, M. & Schledjewski, R., 2023.

    Research output: Contribution to conference › Paper › peer-review

  6. 2021
  7. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS): Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 22 Jul 2021.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. E-pub ahead of print

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., 15 Jun 2021, (E-pub ahead of print) In: Polymer Composites. 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 2021, In: Advanced Manufacturing: Polymer and Composites Science. 7, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. 2020
  16. Published

    Fatigue monitoring of flax fibre reinforced epoxy composites using integrated fibre-optical FBG sensors

    Szebényi, G., Blößl, Y., Hegedüs, G., Tábi, T., Czigany, T. & Schledjewski, R., 20 Oct 2020, In: Composites science and technology. 199, 108317.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A robust empirical model equation for the compaction response of textile reinforcements

    Blößl, Y. & Schledjewski, R., 1 Oct 2020, In: Polymer Composites. 42.2021, 1, p. 297-308 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Applicability of fiber Bragg grating sensors for cure monitoring in resin transfer molding processes

    Blößl, Y., Hegedüs, G., Szebényi, G., Tábi, T., Schledjewski, R. & Czigany, T., 10 Sept 2020, In: Journal of Reinforced Plastics and Composites.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system

    Costa Dias, R. D. C., Leali Costa, M., Santos, L. D. S. & Schledjewski, R., 22 Jun 2020, In: Thermochimica Acta. 690.2020, August, 12 p., 178636.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Reliable and Sustainable composite production for Biobased Components (RSBC) Verarbeitung und Prozessmonitoring

    Schledjewski, R., Blößl, Y. & Salzmann, M., 18 Feb 2020.

    Research output: Contribution to conference › Poster › Transfer

  21. Published

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 2 Jan 2020, In: Advanced Manufacturing: Polymer and Composites Science. 6, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. 2019
  24. Published

    SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT

    Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  33. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 1 Jan 2019, In: International Journal of Production Research. 57, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  40. 2018
  41. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Path calculation, technology and opportunities in dry fiber winding: A review

    Sofi, T., Neunkirchen, S. & Schledjewski, R., 3 Jul 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4, 3, p. 57-72 16 p.

    Research output: Contribution to journal › Review article › peer-review

  45. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  47. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2, 2

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    A built-in sensor with carbon nanotubes coated by Ag clusters for deformation monitoring of glass fibre/epoxy composites

    Slobodian, P., Riha, P., Matyas, J., Olejnik, R., Lloret Pertegás, S., Schledjewski, R. & Kovar, M., 5 Apr 2018, In: Journal of Physics: Conference Series. 987, 1, 012017.

    Research output: Contribution to journal › Conference article › peer-review

  55. Published

    Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection

    Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 1 Mar 2018, In: Composites science and technology. 156, p. 61-69 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 2018, 39(2), p. 360-367 8 p., 2018, 39(2).

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    ELLIPTIC PARABOLOID FLOW FRONT MODELLING FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY THE RADIAL FLOW TECHNIQUE

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, In: Advanced Manufacturing: Polymer and Composites Science.

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2017
  66. Published

    Monitoring of FRPC manufacturing processes

    Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.

    Research output: Contribution to conference › Paper

  67. Published

    Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact

    Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. p. 58-65

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications : TTP, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  81. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  83. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  85. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  86. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  87. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Permeability customisation through preform manipulation utilising 3d-printing technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Jan 2017, In: Polymers and Polymer Composites. 25, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. 2016
  92. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 1 Nov 2016, Materials Science Forum. Vol. 879. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection

    Lloret Pertegas, S., Matyas, J., Olejnik, R., Slobodian, P. & Schledjewski, R., Nov 2016.

    Research output: Contribution to conference › Paper

  94. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms

    Konstantopoulos, S., Hueber, C., Mühlbachler, E. & Schledjewski, R., 20 Sept 2016, In: Advanced Manufacturing: Polymer and Composites Science. p. 57-66 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Nanostructured CNT based sensing films used in multi-functional hybrid composites

    Schledjewski, R., Lloret Pertegas, S., Matyas, J., Olejnik, R. & Slobodian, P., 15 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  97. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 9 Sept 2016, IOP Conference Series: Materials Science and Engineering. Vol. 139(1). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Schledjewski, R. & Konstantopoulos, S., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Konstantopoulos, S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Automated tape laying (ATL) process simulation through 3d thermos-mechanical model

    Schledjewski, R., Satheesh, B. & Duplesis Kergomard, Y., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Improved cure simulation in pultrusion process about heating systems: A case study

    Costa Dias, R. D. C., Santos, L. S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Hybrid structures manufactured by using thermoplastic tape placement for local reinforcement build-up

    Schledjewski, R., Satheesh, B. & Duplessis Kergomard, Y., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  105. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  106. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2, 1

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 1 Jun 2016, In: Polymer Composites. 37, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Review of cost estimation: methods and models for aerospace composite manufacturing

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. Vol. 2

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION

    Hueber, C., Horejsi, K. & Schledjewski, R., Jun 2016, Proceeding of the 17th European Conference on Composite Materials. Munich/ Germany

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  111. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 20 Apr 2016, In: Science and Engineering of Composite Materials.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms

    Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor

    Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.

    Research output: Contribution to conference › Paper

  117. 2015
  118. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Hocheffiziente Prozesse: Materialverständnis und Automation als SchlüsselelementeEine Fallbetrachtung

    Schledjewski, R., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Transfer

  120. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Automated Composite Manufacturing by Means of Model Based Process Control

    Schledjewski, R. & Fauster, E., 24 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  123. Published

    Integrated Process Development as a Basis of Highly Efficient FRPC-Processing

    Schledjewski, R., 12 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  124. Published

    Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments

    Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  126. Published

    Numerical Filling Predictions and Mechanical Mould Simulations for Composite Manufacturing Techniques

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 17 Apr 2015, ESAFORM 2015, Graz, Österreich, 15.-17.04.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Forming of fiber reinforced polymers

    Schledjewski, R., 16 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  128. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  129. Published

    Material performance under in situ consolidation conditions during continuous placement processing

    Schledjewski, R., Satheesh, B. & Tonejc, M., 4 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  130. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    An Evaluation of the Reproducibility of Capacitive Sensor Based In-Plane Permeability Measurements: A Benchmarking Study

    Grössing, H., Schledjewski, R., Kaufmann, S., Mitschang, P. & Becker, D., 2015, In: Express Polymer Letters. 9, p. 129-142

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Compaction behavior of continuous carbon fiber tows: An experimental analysis

    Kastanis, D., Schledjewski, R., Steiner, H. & Fauster, E., 2015, In: Advanced Manufacturing: Polymer and Composites Science. 1, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Enabling RTM processing of components with varying wall thickness: Accurate transverse Permeability measurements under unsaturated flow conditions

    Konstantopoulos, S., Hergan, P., Grössing, H. & Schledjewski, R., 2015.

    Research output: Contribution to conference › Paper › peer-review

  137. Published

    Exploiting temperature measurements for cure monitoring of FRP composites. Applications with thermocouples and Infrared thermography

    Konstantopoulos, S., Tonejc, M., Maier, A. & Schledjewski, R., 2015, In: Journal of Reinforced Plastics and Composites. 34, 12, p. 1015 1026 p.

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Numerical Filling Predictions and Mechanical Mold Simulations for Composite Manufacturing Techniques: RTM Tool Development

    Grössing, H., Konstantopoulos, S. & Schledjewski, R., 2015, In: Key engineering materials. 651-653, p. 423-432

    Research output: Contribution to journal › Article › Research › peer-review

  140. 2014
  141. Published

    Development & modeling of novel roving impregnation process inside closed sinusoidal cavity

    Miaris, A., Mitschang, P. & Schledjewski, R., 1 Jul 2014, In: SAMPE journal : official journal of the Society for the Advancement of Material and Process Engineering . 50, 4, p. 34-44 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe

    Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Automatisierte Legeverfahren

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  145. Published

    Bearbeitung, Oberflächenbehandlung

    Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  146. Published

    Christian Doppler Laboratory for High Efficient Composite Processing

    Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS

    Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Defect depth determination in a CFRP structure using TSR technique

    Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014

    Research output: Non-textual form › Web publication/site › Research

  150. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. Published

    FRP parts in aircraft development: design-to-cost approaches

    Horejsi, K. & Schledjewski, R., 2014, Proceedings of THE 22ND ANNUAL INTERNATIONAL CONFERENCE ON COMPOSITE ENGINEERING. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Glass Covered Magnetic Micro-Wires Operating in the Domain Wall Nucleation and Propagation Sensing Mode for Stress Detection in FRP Composite Structures

    Konstantopoulos, S., Potirakis, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Kontinuierliches Schweißen unidirektional faserverstärkter Tapes – Wie kann die Bindungsqualität bewertet werden?

    Schledjewski, R., 2014, Online Proceedings 4a Technologietag 2014. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Kosteneffiziente Verbundbauteilgestaltung in der Luftfahrt – Methoden und Modelle zur Kostenschätzung

    Hueber, C., Horejsi, K. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium : 13. - 14. November 2014. Schledjewski, R. (ed.). p. 155-167 (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Kritische Betrachtung von LCM Füllsimulationen: Abgleich des realen Prozesses mit numerischen Vorhersagen

    Grössing, H., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 7-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. p. 193-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen

    Schledjewski, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  159. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

    Maier, A., Schmidt, R., Oswald-Tranta, B. & Schledjewski, R., 2014, In: Materials. 7, p. 413-429

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Prepregs

    Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  162. Published

    Production method evaluation for large cylindrical composite parts under a cost perspective

    Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Pultrusionsverfahren

    Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  164. Published

    Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes

    Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications

    Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Wickel- und Tapelegetechnik

    Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  167. 2013
  168. Published

    Accurate 2d permeability measurement: Optical permeability characterization

    Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    An adaptive modular monitoring & control system for composites manufacturing processes

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, In: JEC Composites Magazine. 81, May-June, p. 60-62

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Cost-based process selection for CFRP aerospace parts

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  172. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 8439-8446

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Cost-saving potentials for CFRP parts in early design stages

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  174. Published

    CULT – Hybrider Leichtbau mit ganzheitlichem Ansatz am Beispiel “CULT” (Cars’ Ultra Light Technologies)

    Schledjewski, R., 2013, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. 2013, 2, p. 85-85

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  176. Published

    Economic investigation of impact damage using non-destruction thermography analysis on structural automotive parts

    Maier, A., Schledjewski, R. & Oswald-Tranta, B., 2013, ICSAAM 2013. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    High efficient composite processing

    Schledjewski, R., 2013, ICSAAM 2013. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing

    Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems

    Grishchuk, S. & Schledjewski, R., 2013, Carbon Nanotube Enhanced Aerospace Composite Materials. p. 99-154

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  180. Published

    Moulds for continuous fiber reinforced polymer Composites

    Schledjewski, R., 2013, Mould-Making Handbook. p. 200-239

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  181. Published

    Multifunktionale Oberflächen und Grenzflächen in Verbundwerkstoffen: Online Erfassung von Kompaktierung, Imprägnierung und Aushärtegrad

    Kastanis, D. & Schledjewski, R., 2013, 22. Leobener Kunststoff-Kolloquium „Oberflächen und Grenzflächen in der Polymertechnologie“. p. 168-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Optical permeability measurement of NCF: Influence of material properties on the 2d preform permeability

    Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 5802-5809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Parametric study on processing parameters and resulting part quality through thermoplastic placement process

    Khan, M. A., Mitschang, P. & Schledjewski, R., 2013, In: Journal of composite materials. 47, p. 485-499

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Simulation of the tape-laying process for thermoplastic matrix composites

    Narnhofer, M., Schledjewski, R., Mitschang, P. & Perko, L., 2013, In: Advances in Polymer Technology. 32, p. E705-E713

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination

    Fauster, E., Grössing, H. & Schledjewski, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  187. Published

    Thermal degradation analysis of short-time heated polymers

    Bayerl, T., Brzeski, M., Martínez-Tafalla, M., Schledjewski, R. & Mitschang, P., 2013, In: Journal of thermoplastic composite materials. p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Uncertainty analysis for optical permeability measurement of reinforcing textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. 2012
  190. Published

    A Model-Based Processing Concept for Thermoplastic Tape Placement

    Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management

    Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    CFD Simulations of a hot gas torch for the thermoplastic tape placement process

    Narnhofer, M., Pazour, P. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    COMPARISON OF PERMEABILITY MEASUREMENTS OF SEVERAL FIBRE TEXTILES USING DIFFERENT MEASUREMENT METHODS

    Grössing, H., Wolfahrt, M., Müller, A. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  194. Published

    Filament winding process in thermoplastics

    Schledjewski, R., 2012, Manufacturing techniques for polymer matrix composite (PMCs). p. 182-208

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  195. Published

    Induction heating of thermoplastic materials by particulate heating promoters

    Bayerl, T., Schledjewski, R. & Mitschang, P., 2012, In: Polymers & Polymer Composites (Polymers and polymer composites). 20, p. 333-342

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Montanuniversität Leoben: Kolloquium Polymerer Leichtbau

    Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung

    Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY

    Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Simulation of materials behaviour during in-situ consolidation using continuous welding processes like thermoplastic tape placement

    Schledjewski, R., Khan, M. A. & Mitschang, P., 2012, Proceedings ECCOMAS2012. p. 4298-4307

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Simulation of the thermoplastic tape placement

    Maurer, D., Khan, M. A., Mitschang, P. & Schledjewski, R., 2012, Proceedings 4th European Conference on Materials and Structures in Aerospace – EUCOMAS 2012. p. 1-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  202. Published

    Vielfältige Möglichkeiten und immer noch große Herausforderungen

    Schledjewski, R., 2012, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-4

    Research output: Contribution to journal › Article › Research › peer-review

  203. 2011
  204. Published

    20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau

    Schledjewski, R. (Editor), 2011, Leoben: Eigenverlag. (Schriftenreihe Kunststofftechnik Leoben; vol. 1)

    Research output: Book/Report › Book › Research

  205. Published

    Controlled influence of component properties using hybrid techniques by combining different lightweight structures

    Holschuh, R., Mitschang, P. & Schledjewski, R., 2011, Proc. 18th International Conference on Composite Materials (ICCM). p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Cost comparison of different thermoplastic and thermoset filament winding processes

    Mack, J., Schledjewski, R. & Mitschang, P., 2011, SAMPE International Symposium Proceedings. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 199-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Duromere Faserverbundstrukturen in der Großserie

    Kastanis, D. & Schledjewski, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    Future Fusion

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. p. 36-36

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    MODELING THE IMPREGNATION PROCESS OF A SIPHON IMPREGNATION SYSTEM DURING FILAMENT WINDING

    Miaris, A., Päßler, M., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Online consolidation process optimization by means of process simulation

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, THEPLAC 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Processing and properties of glass/polypropylene in long fibre compounding extrusion

    Schledjewski, R. & Priebe, M., 2011, In: Plastics, rubber and composites. 40, p. 374-379

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textiles

    Schledjewski, R., Pohl, T., Bierer, M., Natter, E., Madsen, B. & Hoydonckx, H., 2011, In: Plastics, rubber and composites. 40, p. 294-299

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    Research into the processing of composites

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. 2011, 11, p. 33-33

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    RING WINDING TECHNOLOGY – INCREASED PROCESS EFFICIENCY AND EFFECTS ON THE MECHANICAL PROPERTIES OF RING SPECIMENS

    Päßler, M., Miaris, A., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Simulation des kontinuierlichen Schweißprozesses

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Status und Potentiale der Automation in der Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  219. Published

    Zweidimensionale Permeabilitätsmessung von flächigen Faserhalbzeugen unter Verwendung von optischen und kapazitiven Messverfahren

    Größing, H., Wolfahrt, M. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 205-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (206)