Peter Schumacher

51 - 100 out of 264Page size: 50

Publications / Theses

  1. 2016
  2. Published

    Grundlegende und neuartige Untersuchungen an übereutektischen AlSi-Gusslegierungen

    Petkov, T., Berbic, M., Pabel, T., Kneißl, C. & Schumacher, P., Jul 2016, In: Werkstoffe in der Fertigung. 4, p. 22-24 3 p.

    Research output: Contribution to journal › Article › Research

  3. Published

    Eu Modification of Al-Si Alloys Studied at the Atomic Scale

    Li, J., Hage, F. S., Ramasse, Q. & Schumacher, P., 10 Jun 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Evaluation of the effect of artificial re-gassing of aluminium melts after ultrasonic treatment

    Cziegler, A., Pabel, T., Habe, D. & Schumacher, P., 10 Jun 2016, In: International journal of cast metals research. 30, 1, p. 30-33 4 p.

    Research output: Contribution to journal › Letter › peer-review

  5. Published

    Foundry sand core property assessment by 3-point bending test evaluation

    Stauder, B., Kerber, H. & Schumacher, P., 4 Jun 2016, In: Journal of materials processing technology. 237 (2016), p. 188 - 196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Aluminium Solidification Fundamentals

    Schumacher, P., 24 May 2016.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    As Cast Microstructure

    Schumacher, P., 24 May 2016.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Grain Refinement Theory

    Schumacher, P., 24 May 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    High resolution observation of solidification interfaces in Al-Si alloys

    Schumacher, P., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Mikrogefüge von Al-Si Legierungen: Kornfeinung und Porenbildung

    Schumacher, P., 14 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Einfluss von Spurenelementen auf das Eigenschaftspotential einer Aluminium-Gusslegierung

    Pabel, T., Kneißl, C., Petkov, T. & Schumacher, P., 7 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Montanuniversität Leoben - Kompetenz durch Kooperation

    Schumacher, P., Apr 2016, In: Gießerei. 4, p. 30-33 4 p.

    Research output: Contribution to journal › Article › Research

  13. Published

    Heterogeneous nucleation of entrained eutectic Si in high purity melt spun Al-Si alloys investigated by entrained droplet technique and DSC

    Li, J. H., Albu, M., Ludwig, T. H., Hofer, F., Arnberg, L. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  14. Published

    Impurity effects on the solidification of primary Al3(Sc,Zr) phase in Al alloys

    Li, J. H. & Schumacher, P., 31 Mar 2016, In: IOP Conference Series: Materials Science and Engineering. 117, 1, 012020.

    Research output: Contribution to journal › Conference article › peer-review

  15. Published

    Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys

    Schumacher, P. & Li, J., 17 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys

    Li, J., Hage, F., Romaner, L., Scheiber, D., Ramasse, Q. & Schumacher, P., 17 Feb 2016, Frontiers in solidification: Materials Processing & Manufacturing Division (MPMD) Symposium in Honor of Michel Rappaz.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Modification of eutectic Si and refinement of eutectic grain in Al-Si-Mag alloys by CrB2 and Sr addition

    Li, J. & Schumacher, P., 17 Feb 2016, Light Metals 2016. p. 711-714

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Preliminary Investigation of the Grain Refinement Mechanism in Cu Alloys

    Cziegler, A. & Schumacher, P., 17 Feb 2016, Shape Casting: 6th International Symposium, TMS 2016 145th Annual Meeting & Exhibition. Tiryakioğlu, M., Jolly, M. & Byczynski, G. (eds.). p. 159-166 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effect of trace elements on material properties of an aluminium casting alloy

    Pabel, T., Kneißl, C., Petkov, T. & Schumacher, P., Feb 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions

    Li, J. & Schumacher, P., Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Wolfram-Verbundwerkstoffe als Formenmaterial im Druckguss

    Hofer, P., Gössl, W., Tucan, K.-P., Schindelbacher, G. & Schumacher, P., 18 Jan 2016, In: Gießerei. p. 76-83 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Cluster formation at the Si / liquid interface in Sr and Na modified Al-Si alloys

    Barrirero, J., Li, J., Engstler, M., Ghafoor, N., Schumacher, P., Odén, M. & Mücklich, F., 2016, In: Scripta materialia. 117, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Development and numerical simulation of a compound belt casting process

    Heugenhauser, S., Kaschnitz, E., Mittler, T., Pintore, M. & Schumacher, P., 2016, Proceedings, TMS 2016, Nashville, USA. p. 1017-1021

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys

    Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G. & Schumacher, P., 2016, In: Acta materialia. 111, p. 85-95 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)

    Staggl, S., Bozorgi, S., Kretz, R. & Schumacher, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 116-125

    Research output: Contribution to journal › Article › Research

  26. Published

    Investigation of heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EELS

    Li, J., Hage, F., Ramasse, Q. & Schumacher, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    New Possibilities with Improved Green Sand Testing Facilities

    Kerber, H., Riegler, M., Schindelbacher, G. & Schumacher, P., 2016, In: Livarski vestnik. 1, p. 2-14 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy

    Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F. & Schumacher, P., 2016, In: Acta materialia. 108, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys

    Li, J., Hage, F. S., Liu, X., Ramasse, Q. & Schumacher, P., 2016, In: Scientific reports (London : Nature Publishing Group). 6, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Ultrasound degassing and computed tomography quality control

    Pabel, T., Petkov, T., Habe, D. & Schumacher, P., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Ultrasound degassing and computed tomography quality control

    Pabel, T., Petkov, T., Habe, D. & Schumacher, P., 2016, Conference Proceedings: 19th World Conference on Non-Destructive Testing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. 2015
  33. Published

    Festschrift zum Jubiläum 175 Jahre Montanuniversität Leoben, 2015: Lehrstuhl für Giessereikunde

    Schumacher, P., Oct 2015, Die Entwicklung der Montanuniversität Leoben seit 1990: 175 Jahre. Vol. 1. p. 164-167 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  34. Published

    Atomistic characaterization on the solute clustering and precipitation of Mg alloys

    Schumacher, P. & Li, J., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    The roles of Eu during the growth of eutectic Si in Al-Si alloys

    Li, J., Hage, F., Wiessner, M., Romaner, L., Scheiber, D., Sartory, B., Ramasse, Q. & Schumacher, P., 2 Sept 2015, In: Scientific reports (London : Nature Publishing Group). 5, 13802 , p. 1-10 10 p., Scientific Reports | 5:13802 | DOI: 10.1038/srep13802.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Aspects of modern production methods of integrated high pressure die castings

    Tucan, K.-P., Hofer, P. & Schumacher, P., Sept 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Verfahren zur Raffination und Gefügemodifukation Von AlMgSi-Legierungen

    Pabel, T. (Inventor) & Schumacher, P. (Inventor), 26 Aug 2015, IPC No. C22C1/02, C22C1/03, C22C21/08, Patent No. EP2705171 (B1), Priority date 3 May 2011, Priority No. AT20110000615 20110503

    Research output: Patent

  38. Published

    A benchmark for the validation of solidification modelling algorithms

    Kaschnitz, E., Heugenhauser, S. & Schumacher, P., 8 Jul 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Sustainable Technology of Metal Materials

    Schumacher, P., 4 Jun 2015.

    Research output: Contribution to conference › Presentation › Education

  40. Published

    Potenziale von Standard-Druckgusslegierungen

    Tucan, K.-P., Hofer, P., Schindelbacher, G., Schumacher, P. & Gschwandtner, R., 2 Jun 2015, In: Gießerei. 6, p. 52-64

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Al solidification fundamentals, Grain refinement theory

    Schumacher, P., 12 May 2015.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Einfluss von Spurenelementen auf die Veredelung und die Größe von eutektischen Körnern in Al-Si Legierungen

    Li, J. H., Albu, M., Hofer, F. & Schumacher, P., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Key roles of impurities during solidification in Al alloys

    Schumacher, P., 17 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegerungen

    Heugenhauser, S., Kaschnitz, E., Langbein, F. & Schumacher, P., Mar 2015, In: Gießerei. 3, p. 40-47

    Research output: Contribution to journal › Article › Research

  45. Published

    Modification of eutectic Si in Al-Si alloys with Eu addition

    Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z. & Schumacher, P., 1 Feb 2015, In: Acta materialia. 84, p. 153-163 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Correlative characterization of primary Al3(Sc,Zr) phase in an Al-Zn-Mg based alloy

    Li, J. H., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F. & Schumacher, P., 1 Jan 2015, In: Materials characterization. 102, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Experimental investigations on energy absorption capacity of selected AlSiMg casting alloys

    Domitner, J., Bozorgi, S., Anders, K., Angermeier, C. & Schumacher, P., 1 Jan 2015, In: Materials Science and Technology (United Kingdom). 31, 1, p. 85-93 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Control of precipitation during heat treatments based on DSC experiments

    Schumacher, P., Pogatscher, S., Starink, M., Keßler, O., Schick, C., Mohles, V. & Milkereit, B., 2015, International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Whistler, Canada, p. 699 706 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    New developments of Al-Zn cast alloys

    Krajewski, W. K., Buras, J., Krajewski, P. K., Greer, A. L., Faerber, K. & Schumacher, P., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  50. Published

    Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition

    Li, J., BARRIRERO, J., ENGSTLER, M., ABOULFADL, H., MüCKLICH, F. & Schumacher, P., 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions

    Li, J. H., Yang, Y. G., Soemmez, S., Taylor, J. A., Oberdorfer, B., Habe, D., Heugenhauser, S. & Schumacher, P., 2015, In: International journal of cast metals research. 29, 3, p. 158-173

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Solute adsorption and entrapment during eutectic Si growth in Al-Si-based alloys

    Li, J., Albu, M., Hofer, F. & schumacher, P., 2015, In: Acta materialia. 83, p. 187-202

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (264)