Paul O'Leary

(Former)

1 - 247 out of 247Page size: 500

Publications / Theses

  1. 2022
  2. Published

    Computational methods for the detection of wear and damage to milling tools br

    Ninevski, D., Thaler, J., O'Leary, P., Klunsner, T., Mucke, M., Hanna, L., Teppernegg, T., Treichler, M., Peissl, P. & Czettl, C., Oct 2022, In: JOURNAL OF MANUFACTURING PROCESSES. 82, p. 78-87

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 2022, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2021
  5. Published

    Instrumentation of a Roving Inspection Test Rig with Surface Geometry Measurement of Fiber Bundles

    Lehner, S., Neunkirchen, S., Fauster, E. & O'Leary, P., 29 Jun 2021, 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings. IEEE Xplore (online): Institute of Electrical and Electronics Engineers Inc.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Accepted/In press

    Estimating Parameters of a Sine Wave by the Method of Variable Projection

    O'Leary, P. & Ninevski, D., 2021, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Static Calibration and Dynamic Verifiation of a 3-Axis Accelerometer using the Method of Variable Projection

    Lang, E., Rollett, M., Theußl, E. & O'Leary, P., 2021.

    Research output: Contribution to conference › Paper › peer-review

  8. 2020
  9. Published

    A Convolutional Method for the Detection of Derivative Discontinuities

    Ninevski, D. & O'Leary, P., 27 Oct 2020, Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020. Petras, I. & Kacur, J. (eds.). Institute of Electrical and Electronics Engineers Inc., 9257282. (Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Unified Software Interface for Numerical Evaluation of Integrals and Derivatives of Fractional Order

    Skovranek, T., Harker, M., Podlubny, I., O'Leary, P. & Petras, I., 27 Oct 2020, Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020. Petras, I. & Kacur, J. (eds.). Institute of Electrical and Electronics Engineers Inc., 9257225. (Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Accepted/In press

    Detection of Derivate Descontinuities in Observational Data

    Ninevski, D. & O'Leary, P., Aug 2020, (Accepted/In press) Journal of Electrical and Electronic Engineering. (Journal of Electrical and Electronic Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. E-pub ahead of print

    Hyper resolution image mosaics with unbounded vertical field of view

    Koenig, J. & O'Leary, P., 21 Jul 2020, (E-pub ahead of print) In: Computers in industry. 122.2020, November, 8 p., 103281.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A Miniature Multi-sensor System and it's Application in a Condition Monitoring

    Rollett, M., Theußl, E., O'Leary, P., Fruhmann, R. & Ellensohn, B., 2020.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Calibration and Registration Methods for a Condition Monitoring Multi-Sensor System

    Rollett, M., Theußl, E., O'Leary, P., Fruhmann, R. & Ellensohn, B., 2020, Sensor & Transducers. Issue 6 ed. Vol. Vol 245. Vol 245

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Detection of Derivate Discontinuities in Observational Data

    Ninevski, D. & O'Leary, P., 2020.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Detection of Derivative Discontinuities in Observational Data

    Ninevski, D. & O'Leary, P., 2020, Computer Science. Springer

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2019
  18. Published

    Smart solid waste processing plant: vision and pathway

    Khodier, K., Curtis, A., Sarc, R., Lehner, M., O'Leary, P. & Pomberger, R., 8 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Sampling and analysis of coarsely shredded mixed commercial waste. Part I: procedure, particle size and sorting analysis

    Khodier, K., Viczek, S. A., Curtis, A., Aldrian, A., O'Leary, P., Lehner, M. & Sarc, R., 7 Sept 2019, In: International journal of environmental science and technology : IJEST. 2019, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Simultaneous approximation of measurement values and derivative data using discrete orthogonal polynomials

    Ritt, R., Harker, M. & O'Leary, P., 1 May 2019, Proceedings - 2019 IEEE International Conference on Industrial Cyber Physical Systems, ICPS 2019. Institute of Electrical and Electronics Engineers Inc., p. 282-289 8 p. 8780356. (Proceedings - 2019 IEEE International Conference on Industrial Cyber Physical Systems, ICPS 2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Evaluating Particle Size Distributions of Solid Waste - what is "good"?

    Khodier, K., Sarc, R., Lehner, M. & O'Leary, P., 29 Apr 2019.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Constrained polynomial approximation for inverse problems in engineering

    O’Leary, P., Ritt, R. & Harker, M., 1 Jan 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 225-244 20 p. (Lecture Notes in Mechanical Engineering; vol. Part F6).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Hierarchical decomposition and approximation of sensor data

    Ritt, R., O’Leary, P., Rothschedl, C. J., Almasri, A. & Harker, M., 1 Jan 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 351-370 20 p. (Lecture Notes in Mechanical Engineering; vol. Part F6).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. Published

    Evaluating Particle Size Distributions of Solid Waste - what is "good"?

    Khodier, K., Sarc, R., Lehner, M. & O'Leary, P., 2019, Conference Proceedings of 15th Minisymposium Verfahrenstechnik and 6th Partikelforum, Montanuniversitaet Leoben, Austria, 29th-30th April 2019. p. 85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Measurement of Relative Position and Orientation using UWB

    Theußl, E., Ninevski, D. & O'Leary, P., 2019.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Measurement of Relative Position and Orientation using UWB

    Theußl, E., Ninevski, D. & O'Leary, P., 2019.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Measurement of Relative Position and Orientation using UWB

    Theußl, E., Ninevski, D. & O'Leary, P., 2019, 2019 IEEE International Instrumentation and Measurement Technology Conference I²MTC. Auckland

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Mimicking the Mechanism of Language for the Unsupervised Detection of Hierarchical Structure in Time Series

    Rothschedl, C. J., O'Leary, P. & Ritt, R., 2019, ITISE2019 Granada. Granade, p. 155 160 p. (Proceedings of the 6th International Conference on Time Series and Forecasting).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Simultaneous Approximation of Measurement Values and Derivative Data using Discrete Orthogonal Polynomials

    Ritt, R., Harker, M. & O'Leary, P., 2019

    Research output: Other contribution › Research

  30. 2018
  31. Published

    Force and acoustic emission measurements for condition monitoring of fine blanking tools

    Kollment, W., O'Leary, P., Harker, M., Klunsner, T. & Eck, S., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Real-time tensor polynomial approximation of crosshatch measured geometric surface data

    Harker, M., O'Leary, P., Plessing, L., Hergan, P. & Fauster, E., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Process Equipment for the Implementation of Industry 4.0-Approaches on Mechanical Treatment of Municipal Solid Waste

    Khodier, K., Sarc, R., Lehner, M., Pomberger, R. & O'Leary, P., 4 Apr 2018.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Process Equipment for the Implementation of Industry 4.0-Approaches on Mechanical Treatment of Municipal Solid Waste

    Khodier, K., Sarc, R., Lehner, M., Pomberger, R. & O'Leary, P., Apr 2018, 14th Minisymposium chemical & process engineering and 5th particle forum: Book of Abstracts. Samhaber, W. M., Schneiderbauer, S. & Rezaei, M. (eds.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Analytic Approach to Finding Lines in Images and Estimating their Uncertainty

    Harker, M. & O’Leary, P., 2018, ICGG 2018-Proceedings of the 18th International Conference on Geometry and Graphics - 40th Anniversary. Springer Berlin, p. 1280-1291 12 p. (Advances in Intelligent Systems and Computing; vol. 809).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Geometric fitting, registration and identification for large sets of spatial measurement data

    Harker, M. & O'Leary, P., 2018, ICGG 2018 - Proceedings of the 18th International Conference on Geometry and Graphics: 40th Anniversary - Milan, Italy, August 3-7, 2018. Cocchiarella, L. (ed.). Springer Berlin, Vol. 809. p. 1292-1303 12 p. (Advances in Intelligent Systems and Computing; vol. 809).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Symbolic Analysis of Machine Behaviour and the Emergence of the Machine Language

    Ritt, R. & O'Leary, P., 2018, Theory and Practice of Natural Computing - 7th International Conference, TPNC 2018, Proceedings. Fagan, D., Martín-Vide, C., O'Neill, M. & Vega-Rodríguez, M. A. (eds.). Springer Berlin, p. 305-316 12 p. (Lecture Notes in Computer Science (including subseries Lectrue Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11324 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2017
  39. Published

    Force based Tool Wear Detection using Shannon Entropy and Phase Plane

    Kollment, W., O'Leary, P., Ritt, R. & Kluensner, T., 5 Jul 2017, I2MTC 2017 - 2017 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7969765

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    MEMS Based Inclinometers: Noise Characteristics and Suitable Signal Processing: Noise characteristics and suitable signal processing

    Schmidt, R., O'Leary, P., Ritt, R. & Harker, M., 5 Jul 2017, I2MTC 2017 - 2017 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc., 7969830

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Numerical Solution of the Anomalous Diffusion Equation in a Rectangular Domain via Hypermatrix Equations

    Harker, M. & O'Leary, P., 1 Jul 2017, In: IFAC-PapersOnLine. 50, 1, p. 9730-9735 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Trapezoidal rule and its error analysis for the Grünwald-Letnikov operator

    Harker, M. & O’Leary, P., 1 Mar 2017, In: International Journal of Dynamics and Control. 5, 1, p. 18-29 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Advanced Symbolic Time Series Analysis

    Ritt, R., O'Leary, P., Rothschedl, C. J. & Harker, M., 2017, p. 155-160.

    Research output: Contribution to conference › Paper › peer-review

  44. Published

    Advanced Symbolic Time Series Analysis in Cyber Physical Systems

    Ritt, R., O'Leary, P., Rothschedl, C. J. & Harker, M., 2017, ITISE 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    APPROXIMATION OF PHYSICAL MEASUREMENT DATA BY DISCRETE ORTHOGONAL EIGENFUNCTIONS OF LINEAR DIFFERENTIAL OPERATORS

    Harker, M. & O'Leary, P., 2017, In: Transactions of the Canadian Society for Mechanical Engineering, CSME = Transactions de la Société Canadienne de Génie Mécanique. 41, 5, p. 804-824

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Data Ingestion and Analytics in Mining and Tunneling

    Eichlseder, W. & O'Leary, P., 2017, EUMICON Enquete 2017. Wien

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    iDeepMon - Intelligent Deep Mine Shaft Inspection and Monitoring

    Benecke, N., Engelhardt, H., Heyduk, A., Jendryz, M., Jung, B., Kleta, H., Koch, P., König, J., Leithton, S., O'Leary, P., May, S., Rapp, S., Sastuba, M., Schischmanow, A., Weber, M. & Zuev, S., 2017, 162 ed.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Numerical solution of the anomalous diffusin equation in a rectangular Domain via hypermatrix equations

    Harker, M. & O'Leary, P., 2017, IFAC World Congress. 1 ed. Vol. 50.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Real-Time-Data Analytics in Raw Materials Handling

    Rothschedl, C. J., Ritt, R., O'Leary, P., Harker, M., Habacher, M. & Brandner, M., 2017, p. 144-153.

    Research output: Contribution to conference › Paper › peer-review

  50. 2016
  51. Published

    Fehlerrobuste Sensorik zum Ermitteln einer räumlichen Beziehung zwischen Anlagenkomponenten unter rauen Bedingungen

    O'Leary, P. (Inventor), Harker, M. (Inventor) & Golser, J. (Inventor), 23 Mar 2016, IPC No. EP2682563 (A3), Patent No. DE05.07.12/DEU202012102496, Priority date 5 Jul 2012

    Research output: Patent

  52. Published

    Mining Sensor Data in Larger Physical Systems

    O'Leary, P., Harker, M., Ritt, R., Habacher, M., Landl, K. & Brandner, M., 2016, In: IFAC-PapersOnLine. 49, 20

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  54. 2015
  55. E-pub ahead of print

    An Algebraic Framework for the Real-Time Solution of Inverse Problems on Embedded Systems

    Gugg, C., Harker, M., O'Leary, P. & Rath, G., 26 Aug 2015, (E-pub ahead of print) 12th IEEE International Conference on Embedded Software and Systems. p. 1097 - 1102 15635204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    An inverse problem approach to approximating sensor data in cyber physical systems

    O'Leary, P., Harker, M. & Gugg, C., 6 Jul 2015, Conference Record - IEEE Instrumentation and Measurement Technology Conference. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-July. p. 1717-1722 6 p. 7151539

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Robust machine vision based displacement analysis for tunnel boring machines

    Gugg, C. & O'Leary, P., 6 Jul 2015, Conference Record - IEEE Instrumentation and Measurement Technology Conference. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-July. p. 875-880 6 p. 7151384

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Sylvester equations and the numerical solution of partial fractional differential equations

    Harker, M. & O'Leary, P., Jul 2015, In: Journal of Computational Physics. 293, p. 370 - 384 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    An Autonomous Water Sampling and Monitoring Device for Deployment in Harsh Underground Environment

    Pucher, M., O'Leary, P., Gugg, C. & Höfer-Öllinger, C. G., May 2015.

    Research output: Contribution to conference › Paper › peer-review

  60. Published

    Mining Sensor and Measurement Data in Real­ Time

    Gugg, C., Harker, M., Lee, P. & O'Leary, P., May 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Robust Machine Vision Based Displacement Analysis for Tunnel Boring Machines

    Gugg, C. & O'Leary, P., May 2015.

    Research output: Contribution to conference › Paper › peer-review

  62. Published

    Regularized Reconstruction of a Surface from its Measured Gradient Field: Algorithms for Spectral, Tikhonov, Constrained, and Weighted Regularization

    Harker, M. & O'Leary, P., Jan 2015, In: Journal of Mathematical Imaging and Vision. 51, 1, p. 46-70 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    An algebraic framework for the real-time solution of invers problems on embedded systems

    Gugg, C., Harker, M., O'Leary, P. & Rath, G., 2015, In: ACM Transactions on Embedded Computing Systems. p. 24-24

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Equality constrained least squares with residual bounding for ode and related eigenvalue problems

    Harker, M. & O'Leary, P., 2015, In: SIAM Journal on Computing.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    MATLAB® toolbox for the regularized surface reconstruction from gradients

    Harker, M. & O'Leary, P., 2015, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, The Internat. Soc. for Optical Engineering, Vol. 9534. 95341E

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Sensor-data analytics in cyber physical systems from Husserl to data mining

    O'Leary, P., Harker, M. & Gugg, C., 2015, SENSORNETS 2015 - 4th International Conference on Sensor Networks, Proceedings. p. 176-181 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. 2014
  68. Published

    An Algebraic Framework for the Real-Time Solution of Inverse Problems on Embedded Systems

    Gugg, C., Harker, M., O'Leary, P. & Rath, G., 2 Jun 2014

    Research output: Non-textual form › Web publication/site › Research

  69. Published

    Error resilient sensor system for determining a spatial relationshiop between installation components under harsh environmental conditions

    O'Leary, P. (Inventor), Harker, M. (Inventor) & Golser, J. (Inventor), 8 Jan 2014

    Research output: Patent

  70. Published

    Analytic multisource data fusion and its application to a large-scale optical psd.

    Gugg, C., O'Leary, P. & Harker, M., 2014, In: IEEE transactions on instrumentation and measurement. 63, p. 1116-1126

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    A new approach for the automatic evaluation of the solidification structure in steel using orientational entropy filtering

    GRIESSER, S. & O'Leary, P., 2014, In: Journal of microscopy. 2, p. 161-165

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Distributed recognition system for drilling events detection and classification

    Arnaout, A., O'Leary, P., Esmael, B. & Thonhauser, G., 2014, In: International Journal of Hybrid Intelligent Systems. 11, p. 25-39

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Instrumentation and surface modeling for the measurement of disks, circular- and cylindrical-strips

    O'Leary, P., Harker, M. & Janko, M., 2014, In: IEEE transactions on instrumentation and measurement. 63, 5, p. 1181-1189 9 p., 6722928.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Instrumentation of a surface from its measured gradient field

    O'Leary, P., Harker, M. & Janko, M., 2014, In: IEEE transactions on instrumentation and measurement. 63, p. 1181-1189

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Inverse boundary value problems with uncertain boundary values and their relevance to inclinometer measurements

    O'Leary, P. & Harker, M., 2014, 2014 IEEE International. p. 165-169

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Inverse Problems in CPS

    O'Leary, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Mathematical Model and Software Architecture for the Solution of Inverse Problems Involving Sensor Arrays

    O'Leary, P., Gugg, C., Harker, M. & Rath, G., 2014, 2014 IEEE Sensors: Proceedings of a meeting held 2-5 November 2014, Valencia, Spain. Inst. of Electrical and Electronics Engineers, p. 586-589

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Numerical Solution of Fractional Order Differential Equations via Matrix-Based Methods

    Harker, M. & O'Leary, P., 2014, Fractional Calculus: Theory. Daou, R. A. Z. & Moreau, X. (eds.).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  79. Published

    Numerical Solution of Fractional Order Differential Equations Via Matrix-Based Methods

    Harker, M. & O'Leary, P., 2014, Numerical Solution of Fractional Order Differential Equations Via Matrix-Based Methods. p. 43-64

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  80. Published

    Polynomial accurate numerical fractional order integration and differentiation

    Harker, M. & O'Leary, P., 2014, 2014 International Conference on. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Polynomial Accurate Numerical Fractional Order Integration and Differentiation

    Harker, M. & O'Leary, P., 2014, International Conference on Fractional Differentiation and Its Applications (ICFDA) 2014. Inst. of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Self-Calibrating Optical 3D Pose Measurement Device for Offshore Sites

    Habacher, M., Harker, M. & O'Leary, P., 2014, Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International. p. 1364-1367

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Virtual Calibration Environment for A-Priori Estimation of Measurement Uncertainty

    Gugg, C., Harker, M. & O'Leary, P., 2014, Proceedings of the Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA). p. 52-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    WiP abstract: Model based design for the real-time solution of inverse problems in cyber-physical systems

    Harker, M., Gugg, C. & O'Leary, P., 2014, Proceedings of the Fifth International Conference on Cyber-Physical Systems (ICCPS). p. 217-217

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. 2013
  86. Published

    A Matrix Framework for the Solution of ODEs: Initial-, Boundary-, and Inner-Value Problems

    Harker, M. & O'Leary, P., 11 Apr 2013, In: Journal of Mathematical Imaging and Vision.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    A Framework for Inverse Boundary Value Problems in Cyber Physical Systems

    O'Leary, P., Harker, M. & Pretzler, S., 2013, A Framework for Inverse Boundary Value Problems in Cyber Physical Systems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Direct Regularized Surface Reconstruction from Gradients for Industrial Photometric Stereo

    Harker, M. & O'Leary, P., 2013, In: Computers in industry. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Endbericht Innovationsscheck 838363

    O'Leary, P., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Instrumentation for the 3D measurement of circular disks and the quantification of warpage

    Janko, M., O'Leary, P. & Harker, M., 2013, Proceedings of I2MTC 2013. p. 146-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Large Scale Optical Position Sensitive Detector

    Gugg, C., O'Leary, P. & Harker, M., 2013, Proceedings of I2MTC 2013. p. 1775-1780

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Machine Vision System for the Control of Tunnel Boring Machines

    Habacher, M., O'Leary, P., Harker, M. & Golser, J., 2013, Proc. SPIE 8661, Image Processing: Machine Vision Applications VI, 86610G. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Matrix Framework for the Numerical Solution of Fractional Order Differential Equations

    Harker, M. & O'Leary, P., 2013, Proceedings of Fractional Signals and Systems 2013. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Structural deformation measurement via efficient tensor polynomial calibrated electro-active glass targets

    Gugg, C., Harker, M. & O'Leary, P., 2013, Proceedings of Electronic Imaging 2013. p. 0-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. 2012
  97. Published

    Fehlerrobuste Sensorik zum Ermitteln einer räumlichen Beziehung zwischen Anlagenkomponenten unter rauen Bedingungen

    O'Leary, P. (Inventor), 13 Sept 2012, IPC No. DE202012102496, Patent No. 20 2012 102 496.9

    Research output: Patent

  98. Published

    A Framework for the Evaluation of Inclinometer Data in the Measurement of Structures

    O'Leary, P. & Harker, M., 2012, In: IEEE transactions on instrumentation and measurement. VOL 61, p. 1237-1251

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Discrete Local Basis Functions as Ringing Free Filter as a Trace by Trace Algorithm for Ground Roll Removing

    Steiner-Luckabauer, C., O'Leary, P. & Harker, M., 2012, EarthDoc. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Discrete Local Polynomial Basis Functions as an Alternative to Filter Seismic Data

    Steiner-Luckabauer, C., O'Leary, P. & Harker, M., 2012, EarthDoc. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Fusion of geometric and thermographic data for automated defect detection

    Oswald-Tranta, B. & O'Leary, P., 2012, In: Journal of electronic imaging. 21, p. 021108-1-8

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Least-Squares Polynomial Approximation for the Reduction of Frequency Spreading and Gibbs Error in Fourier Analysis

    O'Leary, P. & Harker, M., 2012, In: IEEE transactions on instrumentation and measurement. p. 1-27

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Maximum Likelihood Circle Fitting by Optimized Path Integration

    Harker, M. & O'Leary, P., 2012, Proceedings of the 15th International Conference on Geometry and Graphics. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    New Approaches to Machine Vision Based Displacement Analysis

    Neumayr, R., Harker, M. & O'Leary, P., 2012, Proceedings 2012 IEEE I2MTC. p. 979-984

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Strain Analysis by Regularized Non-Rigid Registration

    Badshah, A., O'Leary, P., Harker, M. & Tscharnuter, D., 2012, Eleltronic Imaging 2012. SPIE, The Internat. Soc. for Optical Engineering, p. 8300D-1-8300D-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Surface Modelling using Discrete Basis Functions for Real-Time Automatic Inspection

    O'Leary, P. & Harker, M., 2012, 3-D Surface Geometry and Reconstruction: Developing Concepts and Applications. Chandra Pati, U. (ed.). p. 216-264

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  107. 2011
  108. Published

    THERMOGRAFISCHE PRÜFVORRICHTUNG

    Oswald-Tranta, B. (Inventor), O'Leary, P. (Inventor) & Wally, G. (Inventor), 15 Nov 2011, IPC No. G01N 25/ 72 A I, Patent No. AT530897T, Priority date 30 Jun 2008, Priority No. EP20080011811

    Research output: Patent

  109. Published

    Precise pose measurement with single camera calibration for planar parallel manipulators

    Neumayr, R., Zsombor-Murray, P. & O'Leary, P., 24 Oct 2011, In: Transactions of the Canadian Society for Mechanical Engineering. 35, 2, p. 201-213 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Active Laser Target / Kamerakalibierung / Targetsuche

    O'Leary, P., Neumayr, R. & Gugg, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  111. Published

    Active Laser Target / Kamerakalibrierung

    Neumayr, R., O'Leary, P. & Gugg, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  112. Published

    An Algebraic Framework for the Analysis and Processing of Multivariate Cyclic Measurement Data

    Harker, M., O'Leary, P. & Neumayr, R., 2011, In: IEEE transactions on instrumentation and measurement.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Direct Discrete Variational Curve Reconstruction from Derivatives and its Application to Track Subsidence Measurements

    O'Leary, P. & Harker, M., 2011, Proceedings of the Instrumentation and Measurement Technology Conference (I2MTC), 2011. p. 344-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Discrete Local Basis Functions and Their Application to Seismic Data

    Steiner-Luckabauer, C., O'Leary, P. & Harker, M., 2011, EarthDoc. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Electro Active Glass and Laser Targets

    O'Leary, P., Gugg, C. & Neumayr, R., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  116. Published

    Endbericht Innovationsscheck Nr. 827453

    O'Leary, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  117. Published

    Fusion of geometric and thermographic data for the automatic inspection of forging and castings

    Oswald-Tranta, B. & O'Leary, P., 2011, Proc. of SPIE 8000. p. 80000G-1-80000G-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Gram Polynomial Image Decimation and its Application to Non-Rigid Registration

    Badshah, A., O'Leary, P. & Harker, M., 2011, Electronic Imaging 2011. SPIE, The Internat. Soc. for Optical Engineering, p. 7877071-7877078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Least squares surface reconstruction from gradients: Direct algebraic methods with spectral, Tikhonov, and constrained regularization

    Harker, M. & O'Leary, P., 2011, Proceedings of Computer Vision and Pattern Recognition (CVPR) 2011. p. 2529-2536

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  120. Published

    Least squares surface reconstruction from gradients: Direct algebraic methods with spectral, Tikhonov, and constrained regularization

    Harker, M. & O'Leary, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  121. Published

    Non-Rigid Registration for Quality Control of Printed Materials

    O'Leary, P., Badshah, A., Harker, M. & Sallinger, C., 2011, Proc. of SPIE 8000. p. 80000J-1-80000J-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Polynomial Approximation: An Alternative to Windowing in Fourier Analysis

    Harker, M. & O'Leary, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  123. Published

    Polynomial Approximation: An Alternative to Windowing in Fourier Analysis

    O'Leary, P. & Harker, M., 2011, Proceedings of I2MTC 2011. p. 1759-1764

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Projekt Active Laser Target: Endbericht Machbarkeitsstudie

    O'Leary, P. & Neumayr, R., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  125. 2010
  126. Published

    Active Laser Target - Endbericht

    O'Leary, P. & Neumayr, R., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  127. Published

    Active Laser Target / Geodata / Zwischenbericht 1

    O'Leary, P., Neumayr, R. & Probst, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. Published

    BVPs, ODEs, PDEs and Discrete Orthogonal Basis Functions

    O'Leary, P. & Harker, M., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  129. Published

    Concept for Geodata: Track Elevation Reconstruction from Gradients - I

    O'Leary, P., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  130. Published

    Concept for Geodata: Track Elevation Reconstruction from Gradients - II

    O'Leary, P., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  131. Published

    Discrete Polynomial Moments and Savitzky-Golay Smoothing

    O'Leary, P., 2010, Conference Proceeding ICVGIP 2010. p. 440-444

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. Published

    Discrete polynomial moments and the extraction of 3-D embossed digits for recognition

    O'Leary, P., Harker, M. & Mörtl, B., 2010, In: Journal of electronic imaging. 19, p. 031205-1-031205-8

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Documentation of the developed Non Rigid Registration for IPAC

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  134. Published

    First Evaluation of Real Measurement Data for the Track Subsidence Problem

    O'Leary, P. & Harker, M., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  135. Published

    Initial Results: Non-Rigid Image Registraion from Quad Tree using Phase Correlation

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  136. Published

    Motion deblurring of infrared images from a microbolometer camera

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Infrared Physics & Technology. 53, p. 274-279

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Non-Linear Modelling and HIL Simulation of Hydraulic Cylinders for Hydro Turbine Governing System

    Rath, G., O'Leary, P., Zaev, E., Tuneski, A. & Babunski, D., 2010, International Symposium Engergetics 2010. p. 379-391

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Non Rigid Registration

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  139. Published

    Non Rigid Registration: Extended with Weighted Bivariate Tensor Polynomial Approximation

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  140. Published

    Savitzky-Golay Smoothing for Multivariate Cyclic Measurement Data

    O'Leary, P., Harker, M. & Neumayr, R., 2010, I2MTC 2010 Proceedings. p. 1585-1590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Scalable Polynomial Basis and their Applications to Seismic Data Processing

    O'Leary, P. & Steiner-Luckabauer, C., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  142. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Journal of electronic imaging. 19, p. 031204-1-031204-7

    Research output: Contribution to journal › Article › Research › peer-review

  143. 2009
  144. Published

    SYSTEM AND METHOD FOR THE DEFECT ANALYSIS OF WORKPIECES

    O'Leary, P. (Inventor) & Oswald-Tranta, B. (Inventor), 23 Sept 2009, IPC No. G01B11/04, Priority date 12 Dec 2006

    Research output: Patent

  145. Published

    Object processing System, Thermographische Rissfindung von einzelnen Metallteilen

    Oswald-Tranta, B. (Inventor) & O'Leary, P. (Inventor), 24 Jun 2009, IPC No. EP2073002 (A1), Patent No. EP 07024827.3., Priority date 20 Dec 2007

    Research output: Patent

  146. Published

    Object processing System: Apparatus and Procedure for the Automatic Processing with a Robot

    O'Leary, P. (Inventor), Harker, M. (Inventor) & Reindl, I. (Inventor), 17 Jun 2009, IPC No. B25J9/16, Patent No. 07024300.1, Priority date 14 Dec 2007

    Research output: Patent

  147. Published

    AS2A Software - A new tool for Automatic Solidification Structure Analysis

    Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  148. Published

    Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs

    Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Determination of Primary Grain Boundaries in Metallurgical Micrographs via Discontinuities in the Dendrite Orientation

    Griesser, S., O'Leary, P. & Pierer, R., 2009, In: Journal of electronic imaging.

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Discrete Polynomial Moments for Real-Time Geometric Surface Inspection

    O'Leary, P. & Harker, M., 2009, In: Journal of electronic imaging. 18, p. 013015-013015-13

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Filtering: Cyclic Savitzky-Golay Smoothing for Profile Measurement Data

    O'Leary, P., Harker, M. & Neumayr, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  152. Published

    First Tests on Metallurgical Images for Mechanical Engineering

    O'Leary, P., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  153. Published

    Laser Distance Sensor Tests

    O'Leary, P., Tuatsop Tiossock, E. & Tenschert, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  154. Published

    Profile Measurement via Circle-Line Spline Fitting

    Harker, M., O'Leary, P. & Neumayr, R., 2009, Proceedings of the IEEE International Instrumentation and Measurement Technology Conference. p. 1531-1536

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Recognition of 3D Embossed Digits using Discrete Orthogonal Polynomials

    Mörtl, B., O'Leary, P., Harker, M. & Suesut, T., 2009, xx. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Refutal of Claims made in "Surface Reconstruction from Gradient Fields via Gradient Transformations" DOI 10.1007/s11263-009-0302-5

    Harker, M. & O'Leary, P., 2009, In: International Journal of Computer Vision.

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Fauster, E., Sorger, M. & O'Leary, P., 2009, Thermographic crack detection and failure classification.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. 2008
  159. Published

    Thermographic inspection apparatus

    Oswald-Tranta, B. (Inventor), O'Leary, P. (Inventor) & Wally, G. (Inventor), 30 Jun 2008, IPC No. G01N25/72, Patent No. 09008556.4, Priority date 30 Jun 2008

    Research output: Patent

  160. Published

    SYSTEM AND METHOD FOR THE DEFECT ANALYSIS OF WORKPIECES

    O'Leary, P. (Inventor) & Oswald-Tranta, B. (Inventor), 19 Jun 2008, IPC No. G01B11/04, Priority date 12 Dec 2006

    Research output: Patent

  161. Published

    Direct type-specific conic fitting and eigenvalue bias correction

    Harker, M., O'Leary, P. & Zsombor-Murray, P., 3 Mar 2008, In: Image and vision computing. 26, 3, p. 372-381

    Research output: Contribution to journal › Article › Research › peer-review

  162. Published

    An Algebraic Framework for Discrete Basis Functions in Computer Vision

    O'Leary, P. & Harker, M., 2008, Sixth Indian Conference on Computer Vision, Graphics and Image Processing. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Code Identification mittels Light-Sectioning

    O'Leary, P. & Mörtl, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  164. Published

    Combined Polynomial and Periodic Moments for the Analysis of Measured 3D Surfaces

    O'Leary, P., Harker, M. & Suesut, T., 2008, IEEE International Instrumentation and Measurement Technology Conference 2008. p. 354-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Generic Definition of Linked Lines and Circular Arcs - Sadef: Part II

    O'Leary, P., Neumayr, R. & Harker, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  166. Published

    Least squares surface reconstruction from measured gradient fields

    Harker, M. & O'Leary, P., 2008, IEEE Conference on Computer Vision and Pattern Recognition. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Line and Circle Splining: Version 2.0

    O'Leary, P., Neumayr, R. & Harker, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  168. Published

    Line and Circle Splining: Version 3:0

    Harker, M., O'Leary, P. & Neumayr, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  169. Published

    Machbarkeitsstudie VA-Tubulars

    O'Leary, P. & Mörtl, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  170. Published

    Measuring and Analyzing Cross-Sectional Profiles of Rotating Objects Using Light Sectioning

    Schalk, P., O'Leary, P., Ofner, R. & Gfrerrer, A., 2008, In: IEEE transactions on instrumentation and measurement. Oct. 2008, p. 2329-2338

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Methods of Statistical Uncertainty Analysis Applied to Evaluation Algorithms of a Video Extensometer System

    O'Leary, P. & Fauster, E., 2008, Electronic Imaging: Image Processing: Machine Vision Applications. SPIE, The Internat. Soc. for Optical Engineering, p. 68130O-1-68130O-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Profile Aquisition

    O'Leary, P., Harker, M. & Neumayr, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  173. Published

    Understanding the Measurement Problem at Sadef - Part I

    O'Leary, P. & Harker, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  174. 2007
  175. Published

    Algorithm for the Detection of Solder Contacts on Copper Braid

    O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  176. Published

    Calibration, Measurement and Error Analysis of Optical Temperature Measurement via Laser Induced Fluorescence

    Harker, M., O'Leary, P., Stefan Kharicha, M. & Eck, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Calibration, Measurement and Error Analysis of Optical Temperature Measurement via Laser Induced Fluorescence

    Harker, M., O'Leary, P., Stefan Kharicha, M. & Eck, S., 2007, Proceedings of the IEEE Instrumentation and Measurement Technology Conference 2007. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Detection of Smoke in Images of a Converter

    O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  179. Published

    Finding Steel-Plates in Images with the Fast-Fourier Transform (FFT)

    Harker, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  180. Published

    Geometric Surface Inspection for Copper Plates and Carriers

    O'Leary, P., Schalk, P. & Ofner, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  181. Published

    Instrumentation and Measurement Method for the Inspection of peeled Steel Rods

    Reindl, I. & O'Leary, P., 2007, IEEE Instrumentation and Measurement Technology Conference Proceeding. Inst. of Electrical and Electronics Engineers, p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Instrumentation and Measurement Method for the Inspection of peeled Steel Rods

    Reindl, I. & O'Leary, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  183. Published

    Magneto-thermische Prüfungsergebnisse

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  184. Published

    Magneto-thermische Rissprüfung, Weitere Messergebnisse

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  185. Published

    Measuring the Cross-Section and Straightness of Pipes

    Schalk, P., O'Leary, P., Ofner, R. & Gfrerrer, A., 2007, Tagungsband Seminar Rohrherstellung und -verarbeitung. p. 219-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Modelling Drilling Working Times

    O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  187. Published

    New Results for Surface Reconstruction for Photometric Stereo

    Harker, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  188. Published

    Pipe eccentricity measurement using laser triangulation

    Schalk, P., Ofner, R. & O'Leary, P., 2007, In: Image and vision computing. Volume 25, p. 1194-1203

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Plane Calibration with a Fisheye Lens

    Harker, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  190. Published

    Preliminary Measurement of a Graphite Disc

    O'Leary, P. & Reindl, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  191. Published

    Preliminary Measurement of a Small Carbon Brush

    O'Leary, P. & Reindl, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  192. Published

    Preliminary Measurement of Solder Contacts on Copper Braid

    Reindl, I. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  193. Published

    Preliminary Measurement on Carbon Brushes

    Reindl, I. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  194. Published

    Real-Time Geometric Surface Inspection

    Suesut, T., Schalk, P., O'Leary, P., Harker, M. & Fauster, E., 2007, Proceedings ICEAST 2007. p. 415-418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Rectification of Images with Circles

    Harker, M. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  196. Published

    Rissprüfung von Gussteilen

    Oswald-Tranta, B., Sorger, M., Reindl, I. & O'Leary, P., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  197. 2006
  198. Published

    Analysis System: Combined Thermographic and Geometric Inspection

    O'Leary, P. (Inventor), Oswald-Tranta, B. (Inventor) & Wally, G. (Inventor), 12 Dec 2006, Patent No. PCT/EP2006/011949

    Research output: Patent

  199. Published

    A capacitance ultrasonic transducer with micromachined backplate for fast flow measurements in hot pulsating gases

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 1 Aug 2006, In: IEEE sensors journal. 6, 4, p. 898-905 8 p., 1661569.

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Adaptive pulse repetition frequency technique for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 1 Aug 2006, In: IEEE sensors journal. 6, 4, p. 906-915 10 p., 1661570.

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    A Capacitance Ultrasonic Transducer with Micromaschined Backplate for Fast Flow-Measurements in Hot Pulsating Gases

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 898-905

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Adaptive pulse repetition frequency for an ultrasonic transit-time gas flowmeter for hot pulsating gases

    Kupnik, M., Schröder, A., O'Leary, P., Benes, E. & Gröschl, M., 2006, In: IEEE sensors journal. VOL. 6, p. 906-915

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Automatic Positioning of a Robot

    O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  204. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  205. Published

    Direct Estimation of Homogeneous Vectors: An Ill-Solved Problem in Computer Vision

    Harker, M. & O'Leary, P., 2006, Indian Conference on Computer Vision, Graphics and Image Processing. Springer, p. 919-930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Erkennung, Vermessung und Verfolgung von Grobblechtafeln auf Basis optischer Sensoren auf der Grobblechstraße der voestalpine Grobblech GmbH

    Tratnig, M., Reisinger, J., Ackerl, R., Hlobil, H., Degelsegger, R., O'Leary, P. & Harker, M., 2006, XXV. Verformungskundliches Kolloquium. p. 19-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    First Order Geometric Distance (The Myth of Sampsonus)

    Harker, M. & O'Leary, P., 2006, British Machine Vision Conference 2006. BMVA-Pr., p. 87-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Fitting Specific Conics to Scattered Data via Explicit Polynomials

    Harker, M. & O'Leary, P., 2006, International Conference on Signal and Image Processing. MacMillan, p. 489-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Instrumentation and Analysis-Methods for the Measurement of Profiles using Light Sectioning

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, IMTC/06 Proceeding of the 23rd IEEE Instrumentation and Measurement Technology Conference. Inst. of Electrical and Electronics Engineers, p. 1108-1113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Labormessungen zur Erkennung von Schweißnahtfehlern an Vierkantrohren der voestalpine Krems mittels Lichtschnittverfahren

    Schalk, P., O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  211. Published

    Measuring the Straightness and Cross-Sections of Rolled Seamless-Pipes

    O'Leary, P., Schalk, P., Ofner, R. & Gfrerrer, A., 2006, XXV. Verformungskundliches Kolloquium. p. 37-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Messung der Oberflächengeometrie von Knüppelproben für Fa. Rumpler

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  213. Published

    Metric Tracking of Steel Plates

    Harker, M. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  214. Published

    Optical Detection of Surface Defects and Cracks

    O'Leary, P., 2006, Optical Detection of Surface Defects and Cracks. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Optical Inspection of Steel Bars for Automatic Grinding of Surface Defects

    Fauster, E., Koller, N., Ofner, R. & O'Leary, P., 2006, XXV.Verformungskundliches Kolloguium. p. 5-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Optical Servoing for Industrial Surface Machining

    Koller, N., Ofner, R., O'Leary, P. & Fauster, E., 2006, Proceeding of Electronic Imaging, Machine Vision Applications in Industrial Inspection XIV. p. 607001-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Preliminary Investigation of the Measurement of Copper Plates

    O'Leary, P. & Ofner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  218. Published

    Rißdetektion mit thermo-induktiver Methode

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  219. Published

    Thermographische Untersuchung an Schmiedeteilen

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  220. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  221. Published

    Thermoinduktive Drahtinspektion für Oberflächenrisse 2

    Oswald-Tranta, B., Wally, G. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  222. Published

    Thermoinduktive Messungen für Saarstahl AG

    Wally, G., Oswald-Tranta, B. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  223. Published

    Vermessung von geschälten Rundproben für Saarstahl AG

    Reindl, I. & O'Leary, P., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  224. 2005
  225. Published

    Positional and orientational referencing of multiple light sectioning systems for precision profile measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O'Leary, P., 21 Jul 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5679, p. 74-85 12 p., 10.

    Research output: Contribution to journal › Conference article › peer-review

  226. Published

    Berührungsloses Magneto-Thermal Inspektionsverfahren

    O' Leary, P., Oswald-Tranta, B. & Wally, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  227. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005, British Machine Vision Conference 2005. BMVA-Pr., p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Computation of Homographies

    Harker, M. & O'Leary, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  229. Published

    Detection of Surface Cracks on Steel Wire using Thermo-inductive Method

    Oswald-Tranta, B., Wally, G. & O' Leary, P., 2005, Proceedings of 7th International Conference on Quality Control by Artifical Vision. p. 69-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components

    Fauster, E., Steinberger, R., Major, Z., O'Leary, P. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  231. Published

    Direct and least square fitting of coupled geometric objects for metric vision

    O' Leary, P., Harker, M. & Zsombor-Murray, P. J., 2005, In: IEE proceedings / Vision, image and signal processing. Volume 152, p. 687-694

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Evaluation and Calibration Methods for the Application of a Video-Extensometer to Tensile Testing of Polymer Materials

    Fauster, E., Schalk, P. & O'Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII. p. 187-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Fast flow measurements in hot pulsating gases with capacitance ultrasonic transducers

    Schröder, A., Kupnik, M., O'Leary, P., Benes, E. & Gröschl, M., 2005, Proceeding 2st Congress of Alps Adria Acoustics Association. p. 375-380

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. Published

    First Test of Photometric Stereo for the detection of Open Cracks in Steel Blocks

    O' Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  235. Published

    High-temperature video-extensometry for material testing of refractories

    Schalk, P., Fauster, E. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 129-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  236. Published

    Incremental Matrix Orthogonalization with an Application to Curve Fitting

    Harker, M., O' Leary, P. & Zsombor-Murray, P. J., 2005, Electronic Imaging Science and Technology: Computational Imaging III. p. 354-361

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Machine Vision for feedback control in a steel rolling mill

    O' Leary, P., 2005, In: Computers in industry. 56, p. 997-1004

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    Optische Risserkennung an der Brammenoberfläche

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  239. Published

    Positional and Orientational Referencing of Multiple Light Sectioning for Precision Profile Measurement

    Tratnig, M., Hlobil, H., Reisinger, J. & O' Leary, P., 2005, Machine Vision Applications in Industrial Inspection XIII, Electronic Imaging, Science and Technology. p. 74-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    Proben von April 2005

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  241. Published

    Real Time Cutter Path Generation and Control of a Hydraulically Actuated Tunnelling Robot

    Rath, G., Zsombor-Murray, P. & O'Leary, P., 2005, ISR2005 - 36th International Symposion on Robotics. p. 139-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  242. Published

    Reconstruction of the Tube Form for VA Tublars

    O' Leary, P., Schalk, P. & Ofner, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  243. Published

    Risserkennung auf Brammen

    Reindl, I. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  244. Published

    Scaled Images of Cracks on Steel Slabs

    O' Leary, P. & Reindl, I., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  245. Published

    Tool Path Generation for 3D Laser Cladding Using Adaptive Slicing Technology

    Kerschbaumer, M., Ernst, G. & O'Leary, P., 2005, Congress Proceeding Laser Materials Processing Conference. p. 310-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    Versuchsmessungen an "Schieber" der Firma RHI

    Schalk, P., Ofner, R. & O'Leary, P., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  247. 2004
  248. Published

    Camera calibration, data segmentation, and fitting approaches for a visual edge inspection system

    Tratnig, M., O'Leary, P., Hlobil, H. & Reisinger, J., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 42-51 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  249. Published

    Comparison of CMOS and CCD cameras for laser profiling

    Koller, N., O'Leary, P. & Lee, P., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 108-115 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  250. Published

    Geometric surface inspection of raw milled steel blocks

    Reindl, I. & O'Leary, P., 1 Dec 2004, In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 3212, p. 849-856 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    Panoramic optical-servoing for industrial inspection and repair

    Sallinger, C., O'Leary, P., Retschnig, A. & Kammerhofer, M., 1 Dec 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5303, p. 73-80 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  252. Published

    Framework for automatic quality control in industrial environments using distributed image processing

    Schalk, P., Fauster, E., O'Leary, P. & Weiss, M., Jul 2004, In: Journal of electronic imaging. 13, 3, p. 504-514

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Real-time stereo for industrial inspection

    Buchner, B. & O'Leary, P., 2004, Machine Vision Applications in Industrial Inspection XII. p. 22-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. 2003
  255. Published

    A search-and-score structure learning algorithm for Bayesian network classifiers

    Pernkopf, F. & O'Leary, P., 1 Dec 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5132, p. 231-240 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  256. Published

    Image acquisition techniques for automatic visual inspection of metallic surfaces

    Pernkopf, F. & O'Leary, P., 1 Dec 2003, In: NDT and E international. 36, 8, p. 609-617 9 p.

    Research output: Contribution to journal › Review article › peer-review

  257. Published

    Shape description and analysis of range data for milled steel blocks

    Pernkopf, F. & O'Leary, P., 12 Sept 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5011, p. 74-81 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  258. Published

    Calibration verification of a mining machine using image processing

    Ofner, R., Rath, G. & O'Leary, P., 1 Jan 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5011, p. 59-65 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  259. Published

    Floating search algorithm for structure learning of Bayesian network classifiers

    Pernkopf, F. & O'Leary, P., 1 Jan 2003, In: Pattern Recognition Letters. 24, 15, p. 2839-2848 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  260. 2002
  261. Published

    Analogue realizations of fractional-order controllers

    Podlubny, I., Petráš, I., Vinagre, B. M., O'Leary, P. & Dorčák, L., 1 Jul 2002, In: Nonlinear dynamics : an international journal of nonlinear dynamics and chaos in engineering systems. 29, 1-4, p. 281-296 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  262. Published

    Fitting geometric models in image processing using grassmann manifolds

    O'Leary, P., 1 Jan 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4664, p. 22-33 12 p.

    Research output: Contribution to journal › Conference article › peer-review

  263. 1998
  264. Published

    Low-cost, high-precision measurement system for capacitive sensors

    Kolle, C. & O'Leary, P., 1 Jan 1998, In: Measurement science and technology. 9, 3, p. 510-517 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  265. Published

    Optical oxygen sensor instrumentation based on the detection of luminescence lifetime

    Trettnak, W., Kolle, C., Reininger, F., Dolezal, C., O'Leary, P. & Binot, R. A., 1 Jan 1998, In: Advances in Space Research. 22, 10, p. 1465-1474 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  266. 1997
  267. Published

    Fast optochemical sensor for continuous monitoring of oxygen in breath-gas analysis

    Kolle, C., Gruber, W., Trettnak, W., Biebernik, K., Dolezal, C., Reininger, F. & O'Leary, P., 1 Jan 1997, In: Sensors and Actuators, B: Chemical. 38, 1-3, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  268. 1996
  269. Published

    Miniaturized luminescence lifetime-based oxygen sensor instrumentation utilizing a phase modulation technique

    Trettnak, W., Kolle, C., Reininger, F., Dolezal, C. & O'Leary, P., 1 Jan 1996, In: Sensors and Actuators, B: Chemical. 36, 1-3, p. 506-512 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  270. 1995
  271. Published

    Fiber optic and non-fiber optic double-beam pH sensors for use in a flow-through cell

    Holobar, A., Benes, R., Weigl, B. H., O'Leary, P., Raspor, P. & Wolfbeis, O. S., 1 Jan 1995, In: Analytical methods and instrumentation : AMI ; the international journal of new techniques and applications. 2, 2, p. 92-100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  272. 1991
  273. Published

    A Direct-Digital Synthesizer with Improved Spectral Performance

    O'Leary, P. & Maloberti, F., 1 Jan 1991, In: IEEE Transactions on Communications. 39, 7, p. 1046-1048 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (247)