Harald Harmuth

1 - 100 out of 262Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Phase formation in MgO-C refractories with different antioxidants

    Atzenhofer, C. & Harmuth, H., 17 Jul 2021, In: Journal of the European Ceramic Society. 2021, 14, p. 7330-7338

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Harmuth, H. & Marschall, I., 21 Feb 2021.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    A comparison of two damage models for inverse identification of mode Ⅰ fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 13 Feb 2021, In: International Journal of Mechanical Sciences. 197.2021, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Accepted/In press

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 2021, (Accepted/In press) In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2020
  11. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  12. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 2020, In: Journal of the European Ceramic Society. 40, p. 4655 4663 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2019
  15. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL

    Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. E-pub ahead of print

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., 12 Sept 2019, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Review article › peer-review

  21. Published

    Wedge-splitting test on carbon-containing refractories at high temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 1 Aug 2019, In: Applied Sciences (Switzerland). 9, 16, 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

    Kölbl, N. & Harmuth, H., 25 Jul 2019, In: Ironmaking and steelmaking. 2019, 9, p. 1-4 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 12 Jul 2019, (E-pub ahead of print) In: Steel research international. p. ? 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  26. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Creep testing of carbon containing refractories under reducing conditions

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., 2019, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Review article › peer-review

  30. Published

    High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques

    Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.

    Research output: Contribution to journal › Review article › peer-review

  31. Published

    Identification of secondary raw materials in mold powders and their melting behavior

    Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.

    Research output: Contribution to journal › Article › Research

  33. Published

    Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2018
  35. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  43. Published

    An improved Double Hot Thermocouple Technique for Mold Slag Investigation

    Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS

    Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes

    Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.

    Research output: Contribution to journal › Article › Research

  47. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2017
  49. Published

    Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

    Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5035-5043 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation

    Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

    Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37, 6, p. 2521-2529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 15 Mar 2017, In: China's refractories. 26, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  55. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  56. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 2017, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  58. 2016
  59. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Harmuth, H. & Gschiel, S., 19 Nov 2016, In: Journal of the European Ceramic Society. 37, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 29 Mar 2016, In: Engineering Failure Analysis. 62, p. 254-262

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. 2015
  69. Published

    Simulation of micro-crack formation in a magnesia spinel refractory during the production process

    Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Assessment of thermal shock resistance by hmor test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015, UNITECR 2015. Wien, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Firing research for refractories in steel ladle applications

    Parr, C., Harmuth, H., Pandolfelli, V., Poirrier, J., Rigaud, M. & Sinnema, S., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    HIGH TEMPERATURE MICROSCOPIC INVESTIGATIONS IN THE FIELD OF CERAMICS – AN OVERVIEW

    Kircher, V., Kölbl, N., Marschall, I. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Ö. M. G. (ed.). Wien: Eigenverlag, Vol. 161. p. 59 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  77. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Influence of specimen shape and the specimen/pressure plate interface on the cold crushing strength

    Gruber, D., Harmuth, H., Urbanek, G. & Sharma, V., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    In situ observation of slag crystallization

    Kölbl, N., Harmuth, H. & Kircher, V., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 64 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  80. Published

    Interaction steel/slag/submerged entry nozzle and its impact on refractory wear - thermochemical process simulation

    Harmuth, H. & Xia, G., 2015, In: ISIJ international. 55, 4, p. 775-780 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace

    Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen

    Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  83. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  84. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  85. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  86. Published

    Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide

    Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit

    Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. 2014
  91. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453

    Research output: Contribution to journal › Article › Research

  92. Published

    Thermomechanical behavior of steel ladle linings and the influence of insulations

    Gruber, D. & Harmuth, H., 1 Apr 2014, In: Steel research international. 85, 4, p. 512-518 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    A laser irradiation disc test for fracture testing of refractory fine ceramics

    Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Fractographic and Fracture Mechanical Invstigations of Refractories under Different Loading Conditions

    Harmuth, H. & Tschegg, E. K., 2014, In: China's refractories. 23, p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Impact of an increase of Al2O3, TiO2 and ZrO2 on mold slag properties

    Kircher, V., Marschall, I., Kölbl, N. & Harmuth, H., 2014, Proceedings - 8th European Continuous Casting Conference. p. 1050-1059

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Mathematical Modelling of Slag Entrainment in a Gas Stirred Ladle by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2014, 10th India International Refractories Congress - IREFCON14. p. 200-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Refractory Corrosion by Dissolution in Slags - Challenges and Trends of Present Fundamental Research

    Harmuth, H. & Vollmann, S., 2014, In: Iron & [and] steel review. 58, 4, p. 157 - 170

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Steel ladle linings – key issues regarding thermomechanical behaviour

    Gruber, D. & Harmuth, H., 2014, In: RHI bulletin : the journal of refractory innovations. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2013
  108. Published

    The mechanical fracture characterization of non-linear flexible ceramics using digital image correlation

    Belrhiti, Y., Pop, I. O., Doumalin, P., Dupre, J. C., Auer, T., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 1 Jan 2013, p. 3587-3595. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  109. Published

    A Glance on Turbulence Modelling in Simulating Bubble Stirred Ladle Flow

    Pirker, S., König, B., Puttinger, S., Doletschek, M. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 472-474

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (262)