Gerald Gerhard Pinter

1 - 500 out of 758Page size: 500

Publications / Theses

  1. 2024
  2. Published

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., May 2024, In: Polymer Testing. 134, 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G., 1 Jan 2023, In: Science and Engineering of Composite Materials. 30, 1, 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2022
  6. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 2022, In: Polymer Crystallization. 2022, 2387752.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2021
  8. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Morphology and Weld Strength of a Semi-Crystalline Polymer Produced via Material Extrusion-Based Additive Manufacturing

    Petersmann, S., Primetzhofer, A., Lammer, H., Leßlhumer, J., Pinter, G. G. & Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Correction to: Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiha, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 20 May 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Comment/debate › peer-review

  12. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Quantifying matrix-fiber mechanical interactions in hyperelastic materials

    Mansouri, M. R., Beter, J., Fuchs, P. F., Schrittesser, B. & Pinter, G., 5 Jan 2021, In: International Journal of Mechanical Sciences. 195.2021, 1 April, 14 p., 106268.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

    Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov 2020, In: Polymer Testing. 93.2021, January, 9 p., 106978.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device

    Beter, J., Schrittesser, B., Meier, G., Lechner, B., Mansouri, M., Fuchs, P. F. & Pinter, G., 24 Nov 2020, In: Polymers. 12.2020, 12, p. 1-16 16 p., 2780.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., 23 Nov 2020, In: International Journal of Fatigue. 144.2021, March, 8 p., 106050.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance

    Messiha, M., Frank, A., Koch, T., Arbeiter, F. & Pinter, G., 16 Nov 2020, In: International journal of polymer analysis and characterization. 25, 8, p. 649-666 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  26. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

    Khudiakova, A., Berer, M., Niedermair, S., Plank, B., Truszkiewicz, E., Meier, G., Stepanovsky, H., Wolfahrt, M., Pinter, G. & Lackner, J., 17 Oct 2020, (E-pub ahead of print) In: Additive Manufacturing. 36.2020, December, 14 p., 101671.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading

    Beter, J., Schrittesser, B., Lechner, B., Mansouri, M. R., Marano, C., Fuchs, P. F. & Pinter, G., 19 Aug 2020, In: Polymers. 12.2020, 9, 17 p., 1862.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  33. Published

    Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers

    Beter, J., Schrittesser, B., Meier, G., Fuchs, P. F. & Pinter, G., 4 May 2020, In: Applied composite materials. 27.2020, 3, p. 149-164 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites

    Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. & Pinter, G., 18 Feb 2020, In: Polymers. 12.2020, 2, 11 p., 472.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

    Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb 2020, In: Polymer Testing. 82.2020, February, 106304.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 2 Jan 2020, In: Advanced Manufacturing: Polymer and Composites Science. 6, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Accelerated approaches for life-time prediction of composites under static loads

    Gloggnitzer, S., Guttmann, P. & Pinter, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules

    Omazic, A., Oreski, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G. & Erceg, M., 1 Jan 2020, In: Journal of Applied Polymer Science. 48899.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Lifetime calculation of soil-loaded non-pressure polymer pipes

    Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 2020, In: Procedia structural integrity / ESIS, European Structural Integrity Society. 2020, 28

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  44. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  45. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2019
  47. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, In: Key Engineering Materials. 2019, 827

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene

    Wiener, J., Arbeiter, F., Tiwari, A., Kolednik, O. & Pinter, G., 19 Nov 2019, (E-pub ahead of print) In: Mechanics of materials. 140.2020, January, 13 p., 103243.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G. G., 18 Nov 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 545-551 7 p.

    Research output: Contribution to journal › Article › Research

  51. Published

    Fracture mechanics description of the defect in rolling cylinder

    Dlhy, P., Poduška, J., Berer, M., Gosch, A., Pinter, G. G. & Hutař, P., 4 Nov 2019.

    Research output: Contribution to conference › Paper › peer-review

  52. Published

    Soil Load on Plastic Pipe and its Influence on Lifetime

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 1 Nov 2019, In: Strojnícky časopis = Journal of mechanical engineering. 69, 3, p. 101-106 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Sept 2019, In: Lubricants. 7, 9, 73.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    NOVEL APPROACHES FOR LIFETIME PREDICTION OF COMPOSITE MATERIALS FOR STRUCTURAL APPLICATIONS UNDER STATIC LOADS

    Pilz, G., Gloggnitzer, S., Schneider, C. & Pinter, G. G., Sept 2019.

    Research output: Contribution to conference › Paper › peer-review

  56. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests

    Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions: Wet chemical surface treatment and selected environmental conditions

    Röper, F., Wolfahrt, M., Schlögl, S., Kucher, G. & Pinter, G., 15 May 2019, In: Journal of Applied Polymer Science. 136.2019, 19, 47506.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review

    Omazic, A., Oreski, G., Halwachs, M., Eder, G. C., Hirschl, C., Neumaier, L., Pinter, G. & Erceg, M., 1 Apr 2019, In: Solar energy materials and solar cells. 192.2019, April, p. 123-133 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers Inc., 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  67. Published

    Fracture Mechanics Lifetime Prediction of Polyethylene Pipes

    Frank, A., Arbeiter, F. J., Berger, I. J., Hutar, P., Náhlík, L. & Pinter, G., 1 Feb 2019, In: Journal of Pipeline Systems Engineering and Practice. 10.2019, 1, 04018030.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

    Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. & Conzatti, L., 4 Jan 2019, In: Polymers / Molecular Diversity Preservation International. 11.2019, 1, 61.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 2019, 1, p. 1-26 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Differences and similarities in fatigue failure mechanisms of PA12 pipe grades compared to modern PE pipe grades

    Messiha, M., Frank, A., Berger, I., Heimink, J., Van Laak, H., Pinter, G. & Arbeiter, F., 1 Jan 2019.

    Research output: Contribution to conference › Paper › peer-review

  72. Published

    Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition

    Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  73. Published

    Influence of polyolefin cross-contamination on the slow crack growth resistance of polyethylene pipe grade

    Frank, A., Berger, I. J., Messiha, M. & Pinter, G., 1 Jan 2019.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    MECHANICAL CHARACTERIZATION OF HIGH PERFORMANCE THERMAL DECOUPLING UNITS IN BUILDING ENVELOPS

    Pilz, G., Gloggnitzer, S., Schneider, C., Pinter, G. G. & Röper, F., 2019.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. 2018
  79. E-pub ahead of print

    Impact of temperature on the fatigue and crack growth behavior of rubbers

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G. G., 31 Dec 2018, (E-pub ahead of print) In: Procedia Structural Integrity. 13.2018, p. 642-647 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Nanostructured Carbon Fibre-Reinforced Polymer for Tailored Visual Appearance

    Lenzenweger, R., Feuchter, M., Pinter, G. G., Gruber, D. P., McNamara, D. & Brunner, A. J., 26 Nov 2018.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G., 4 Nov 2018, In: International journal of polymer science . 2018, 18 p., 7410925.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grun, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Accelerated aging of polyethylene pipe grades in aqueous chlorine dioxide at constant concentration

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G., 24 Sept 2018, In: Polymer Degradation and Stability. 157.2018, November, p. 80-89 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Fracture mechanical characterization of mica-filled epoxy glass composites under monotonic and cyclic loading

    Pothukuchi, H. K. R., Fuchs, P., Pinter, G. & Stelzer, S., 23 Aug 2018, In: Journal of composite materials. 53.2019, 6, p. 741-751 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation

    Dlhy, P., Poduska, J., Náhlík, L., Berer, M., Gosch, A., Pinter, G. G. & Hutar, P., 2 Aug 2018, Key Engineering Materials. Vol. 774. p. 331 336 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  87. Published

    Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G. G. & Nahlik, L., 2 Aug 2018, p. 325. 330 p.

    Research output: Contribution to conference › Paper › peer-review

  88. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. E-pub ahead of print

    Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 27 Jun 2018, (E-pub ahead of print) In: Engineering Fracture Mechanics. 203.2018, November, p. 18-31 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. E-pub ahead of print

    Induced material degradation of elastomers in harsh environments

    Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 15 May 2018, (E-pub ahead of print) In: Polymer Testing. 69.2018, August, p. 107-115 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  94. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  95. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  96. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  97. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  98. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  99. Published

    Tribological behavior of HNBR in oil and gas field applications

    Balasooriya, W., Schrittesser, B., Wang, C., Hausberger, A., Pinter, G. & Schwarz, T., 13 Feb 2018, In: Lubricants. 6, 1, 20.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Aging Mechanism of Polyethylene Pipe Material in Chlorine Dioxide and Hypochlorite Solution

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Analysis and Development of Transport Phenomena Models for PV Modules

    Castillon, L., Oreski, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  103. Published

    A STRENGTH BASED APPROACH ON S-N CURVES FOR THE FATIGUE LIFE ASSESSMENT OF CONTINUOUSLY FIBER REINFORCED COMPOSITES

    Pinter, G. G., Gaier, C., Maier, J., Fischmeister, S. & Dannbauer, H., 2018, Proceedings ICFC7. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Biomimetic Design Concepts for the Pipe Architecture of Tomorrow

    Pinter, G. G., Arbeiter, F., Wiener, J., Frank, A. & Kolednik, O., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Characterisation of degradation behaviour and material interactions in PV modules

    Barretta, C., Oreski, G., Resch-Fauster, K. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  106. Published

    Comparison of real and simulated failure times based on the slow crack growth behavior

    Berger, I. J., Frank, A., Pinter, G. G., Nitsche, D. & Petry, D., 2018, Proceedings ANTEC 2018. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Determination of the mode I strain energy release rate in carbon fibre reinforced composites by means of digital image correlation technique

    Khudiakova, A., Wolfahrt, M., Godec, D. & Pinter, G. G., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Determination of the Slow Crack Growth Resistance of PA12 Pipe Grades

    Messiha, M., Frank, A., Berger, I. J., Heimink, J., van Laak, H., Arbeiter, F. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Development of Non-Destructive Methods for Acetic Acid Detection in Photovoltaic Modules

    Barretta, C., Oreski, G., Resch-Fauster, K. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  110. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  111. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  113. Published

    Fatigue fracture properties and morphology of Polyoxymethylene (POM) plates produced under moderate processing conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  114. Published

    Fracture mechanical approach to identify the behavior of elastomers in hostile environments

    Balasooriya, W., Schrittesser, B., Pinter, G. G. & Schwarz, T., 2018.

    Research output: Contribution to conference › Poster › Research

  115. Published

    Fracture mechanical characterization of non-virgin pipe materials

    Frank, A., Berger, I. J., Koch, T., Arbeiter, F. & Pinter, G. G., 2018, Proceedings ANTEC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    Influence of backsheet-encapsulant combinations on PV degradation modes

    Castillon, L., Oreski, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  117. Published

    INFLUENCE OF CONDITIONING TIME AND WET CHEMICAL SURFACE TREATMENT ON AIRCRAFT REPAIR

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G. G., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Investigation of the Failure Behavior of Polyethylene Electrofusion Sockets

    Berger, I. J., Frank, A., Pinter, G. G., Nitsche, D. & Petry, D., 2018, Proceedings Plastics Pipes XIX.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Mode III fatigue in technical thermoplastics

    Gosch, A., Berer, M., Dlhy, P., Hutar, P., Arbeiter, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  120. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Multilayer Polymer Pipes - Possible Utilization of Recycled Material

    Hutař, P., Poduska, J., Dlhy, P., Frank, A., Kucera, J., Sadilek, J., Pinter, G. G. & Náhlík, L., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Performance of PE pipe resins in chlorine dioxide containing aqueous solution

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G. G., 2018, Proceedings ANTEC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Short glass fibre reinforced polyamide under low cycle fatigue

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Slow Crack Growth Resistance of Non-Vorgin Polymers

    Frank, A., Berger, I. J., Messiha, M., Arbeiter, F., Koch, T. & Pinter, G. G., 2018, Procedings Plastics Pipes XIX. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Primetzhofer, A., Stadler, G., Schneider, C., Pinter, G. G. & Grun, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  126. Published

    Towards higher reliability of PV modules: role of polymeric materials

    Omazic, M., Oreski, G., Eder, G. C., Hirschl, C., Neumaier, L., Edler, M., Pinter, G. G. & Erceg, M., 2018.

    Research output: Contribution to conference › Poster › Research

  127. Published

    Weathering stability of newly developed polyolefin-based and PET-based backsheet

    Omazic, M., Oreski, G., Eder, G. C., Hirschl, C., Edler, M., Pinter, G. G. & Erceg, M., 2018.

    Research output: Contribution to conference › Poster › Research

  128. Published

    Weathering stability of newly developed polyolefin-based and PET-based backsheet

    Omazic, M., Oreski, G., Eder, G. C., Hirschl, C., Edler, M., Pinter, G. G. & Erceg, M., 2018.

    Research output: Contribution to conference › Poster › Research

  129. 2017
  130. Published

    Influence of cooling rate and annealing on the DSC Tg of an epoxy resin

    Tao, Q., Pinter, G. & Krivec, T., 1 Nov 2017, In: Microelectronics Reliability. 78, p. 396-400 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017. 16 p.

    Research output: Contribution to conference › Poster › Research

  132. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017, (R)Evolution des Antriebs - Auswirkungen auf die Betriebsfestigkeit der Bauteile in der Wirkungskette. 44 ed. Berlin, Vol. DVM_Arbeitskreis Betriebsfestigkeit. 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Optimum Chip-Tape Adhesion for Reliable Pickup Process

    Omazic, M., Tscharnuter, D., Oreski, G., Pinczolits, M., Nikac, N., Rappmund, A., Erceg, M. & Pinter, G., 19 Sept 2017, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 7.2017, 12, p. 2057-2065 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  135. Published

    Crosslinking and post-crosslinking of ethylene vinyl acetate in photovoltaic modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Kraft, M., Eder, G. C. & Pinter, G., 15 Jun 2017, In: Journal of Applied Polymer Science. 134, 23, 44912.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades

    Nezbedova, E., Pinter, G., Frank, A., Hutar, P., Poduska, J. & Hodan, J., Jun 2017, In: Macromolecular Symposia. 373, 1

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Effect of cyclic fatigue on the fracture toughness of Polyoxymethylene

    Ramoa, B., Berer, M., Schwaiger, M. & Pinter, G., 31 May 2017, In: Journal of Physics: Conference Series. 843, 1, p. 168-176 9 p., 012052.

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  139. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  140. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  141. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Paper

  142. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  143. Published

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G., 15 Apr 2017, In: Engineering Fracture Mechanics. 175, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules

    Ottersböck, B., Oreski, G. & Pinter, G., 1 Apr 2017, In: Polymer Degradation and Stability. 138, p. 182-191 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Fatigue Analysis of Continuously Carbon Fiber Reinforced Laminates

    Gaier, C., Fischmeister, S., Maier, J. & Pinter, G., 28 Mar 2017, In: SAE International Journal of Engines. 10, 2, p. 305-315 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  147. Published

    Einfluss der Alterung auf HNBR in der Erdölindustrie

    Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 1 Mar 2017, In: Gummi, Fasern, Kunststoffe. 70, 3, p. 168-176 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Accelerated aging of polyethylene pipe grades in chlorine dioxide and hypochlorite solution applying a newly developed exposure device

    Bredács, M., Frank, A., Bastero, A. & Pinter, G., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1960-1966 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Comparison of real and simulated failure times of electrofusion sockets made of polyethylene

    Frank, A., Berger, I. J., Pinter, G. G., Nitsche, D. & Petry, D., 2017, In: Joining plastics = Fügen von Kunststoffen. 11, 3/4, p. 158 164 p.

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Concept of Optimized Encapsulant Composition for PV Module Reliability under Different Climatic Conditions

    Mihaljevic, A., Oreski, G., Eder, G. C., Voronko, Y., Mühleisen, W., Neumaier, L., Hirschl, C., Ebner, R. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  151. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  152. Published

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  154. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Influence of Backsheet Type on Formation of Acetic Acid in PV Modules

    Mihaljevic, A., Oreski, G. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  156. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polyproyplene

    Arbeiter, F. J., Pinter, G. & Frank, A., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1989-1993 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Influence of residual stress on the results of CRB test

    Poduška, J., Hutar, P., Frank, A., Kucera, J., Sadílek, J., Pinter, G. & Náhlík, L., 2017, p. 268-269. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  158. Published

    Influence of the Surface Pretreatment on the Durability of Adhesively Bonded Composite Repairs

    Röper, F., Wolfahrt, M., Horejsi, K., Kucher, G., Bubestinger, A. & Pinter, G. G., 2017, Proceedings ICCM 21. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Investigating photo-curable thiol-yne resins for biomedical materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Pinter, G., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017, In: Macromolecular materials and engineering. 302, 1600450, DOI: 10.1002/mame.201600450

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 1, p. 15-23 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Verification of the Hydrolysis Resistance of Polyester Based Backsheets on the Market

    Ottersböck, B., Oreski, G., Kühne, M. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  163. Published

    Verification of the Hydrolysis Resistance of Polyester Based Backsheets on the Market

    Ottersböck, B., Oreski, G., Kühne, M. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  164. Published

    WPR-V-3.02-07_TorsionUndMultiaxialeBelastung

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  165. Published

    WPR-V-3.02-08_LCF-Versuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  166. Published

    WPR-V-3.02-10_Lebensdauerberechnung am Bauteil und Validierung durch Bauteilversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  167. Published

    WPR-V-3.02-11_Optimierung Simulationskette

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  168. Published

    WPR-V-3.02-12_Materialgenerator

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  169. Published

    WPR-V-3.05-02_Entwicklung_Prüfstrategie_Probendefinition_und_Referenzversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  170. Published

    WPR-V-3.05-03_Stuetzwirkungsverhalten_in_Kombination_mit_Temperatur

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  171. Published

    WPR-V-3.05-04_Orientierungseinfluss und Bindenaht

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  172. Published

    WPR-V-3.05-05_Einfluss_Umgebungstemperatur_und_Medium

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  173. Published

    WPR-V-3.05-06_Gassnerlinien_variableAmplituden

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  174. 2016
  175. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Paper

  176. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  177. Published

    Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

    Arbeiter, F., Frank, A. & Pinter, G., 10 Oct 2016, In: Journal of Applied Polymer Science. 133, 38

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Lifetime Prediction of PE100 and PE100 RC Pipes based on Slow Crack Growth Resistance

    Frank, A., Berger, I. J., Hutař, P., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    POLYPROPYLENE MULTI-LAYER-PIPES - 100 YEAR LIFETIME ASSESSMENT USING LINEAR ELASTIC FRACTURE MECHANICS

    Pappler, U., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference . Plastics Pipes Conference Association, Vol. 18. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  181. Published

    FAST COMPARISON OF DIFFERENT POLYMERIC PIPE MATERIALS: EXTENDING THE USE OF THE CYCLIC CRBTEST (ISO 18489)

    Arbeiter, F., Pinter, G. & Frank, A., Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 10 p. 118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Fatigue Strength of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 30 Jun 2016. 8 p.

    Research output: Contribution to conference › Paper

  183. Published

    Review on the suitability of stiffness and strength based concepts for the fatigue-life prediction of composites

    Maier, J., Pinter, G. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Abstract › peer-review

  184. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  185. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  187. Published

    Fatigue Strenght of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  188. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Neuartige Elastomerwerkstoffe auf Basis von Nanocompositen

    Ziegler, W., Rieß, G. (Co-editor), Winter, J. (Co-editor), Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt: Schriftenreihe Kunststofftechnik Leoben. Pinter, G. & Pilz, G. (eds.). Leoben, Vol. 6. p. 209-210 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., Feb 2016, In: International Journal of Fatigue. 83, p. 293-299 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    25. Leobener Kunststoff Kolloquium "Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt"

    Pinter, G., Pilz, G. & Payer, M., 2016, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  193. Published

    Accelerated Aging of Polyolefin Pipe Materials in Chlorinated Water

    Bredacs, M., Redhead, A., Frank, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  194. Published

    An Adaptable Semi-Numerical Hyperelastic Model for the Simulation of High-Pressure Forming

    Tscharnuter, D., Truskiewics, E. & Pinter, G., 2016, Proceedings ICCM 2016 International Conference on Computational Mechanics. p. 1114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    A nonlinear viscoelastic constitutive model for polymeric solids based on multiple natural configuration theory

    Muliana, A., Rajagopal, K. R., Tscharnuter, D. & Pinter, G., 2016, In: International journal of solids and structures. 100-101, p. 95 110 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

    Primetzhofer, A., Mösenbacher, A., Pinter, G. & Haslinger, T., 2016, In: AIP Conference Proceedings. 1779, 050012.

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Correlation of epoxy material properties with the toughening effect of fullerene-like WS2 nanoparticles

    Haba, D., Brunner, A., Barbezat, M., Spetter, D., Tremel, W. & Pinter, G., 2016, In: European polymer journal. 84, p. 125 136 p.

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Correlation study of damp heat and pressure cooker testing on backsheets

    Ottersböck, B., Oreski, G. & Pinter, G., 2016, In: Journal of Applied Polymer Science. 133, 47, 44230.

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Development and implementation of an accelerated method for chlorine dioxide exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, In: AIP Conference Proceedings. 1779, 070009.

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  204. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016, Proceedings ECCM 17. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Impact of the acrylonitrile content on the mechanical performance of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Rubber, fibres, plastics international. p. 40 - 47

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Implementation of a New Chlorine Dioxide Device for Accelerated Aging of Polyolefin Pipe Materials

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016, Proceedings PVSEC.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  211. Published

    Influence of thermo-oxidative ageing of HNBR in oil field applications

    Balasooriya, W., Schrittesser, B., Ayalur-Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T. & Kadar, Z., 2016.

    Research output: Contribution to conference › Poster › Research

  212. Published

    Lifetime of polyethylene geomembranes for water proofing of tunnels

    Haager, M., Nitsche, D., Bredács, M., Frank, A. & Pinter, G., 2016, ITA-AITES World Tunnel Congress 2016, WTC 2016. Society for Mining, Metallurgy and Exploration, Vol. 2. p. 1262-1271 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Natural and artifical ageing on backsheets - Comparison of degradation effects

    Ottersböck, B., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  214. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  215. Published

    Rapid Gas Decompression Performance of elastomers - A study of influencing testing parameters

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Procedia Structural Integrity. 2, p. 1746-1754 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  216. Published

    Residual stress distribution in extruded polyolefin pipes

    Hutař, P., Poduska, J., Kučera, J., Nezbedová, E., Frank, A., Sadilek, J. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Residual stress in polyethylene pipes

    Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, In: Polymer Testing. 54, p. 288 295 p.

    Research output: Contribution to journal › Article › Research › peer-review

  218. Published

    Significance of epoxy network properties for the toughening effect of flaky and fullerene-like WS2 nanoparticles

    Haba, D., Barbezat, M., Ayalur-Karunakaran, S., Schlögl, S., Brunner, A. & Pinter, G., 2016, In: Journal of polymer science : B, Polymer physics. 54, 17, p. 1738 1747 p.

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

    Stelzer, S., Ucsnik, S. & Pinter, G., 2016, In: Composites Part A: Applied Science and Manufacturing. 88, p. 39–47

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    The effect of residual stress on the process of crack growth rate determination in polymer pipes

    Poduska, J., Hutař, P., Kucera, J., Sadilek, J., Frank, A., Pinter, G. & Náhlík, L., 2016, In: Solid State Phenomena. 258, p. 174 177 p.

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  222. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  223. 2015
  224. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  225. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  226. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 8 Oct 2015, In: Journal of polymer science : B, Polymer physics. 53, p. 1763 - 1773 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  230. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  231. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  232. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Silicon-based mercaptans: High-performance monomers for thiol-ene photopolymerization

    Roth, M., Oesterreicher, A., Mostegel, F., Moser, A., Pinter, G., Edler, M., Piock, R. & Grießer, T., 17 Aug 2015, In: Journal of polymer science : A, Polymer chemistry. 54, 3, p. 418-424 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 24 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  235. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 24 Jul 2015. 10 p.

    Research output: Contribution to conference › Paper

  236. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II Fatigue Delamination of Different Carbon Fibre Reinforced Composite Laminates

    Stelzer, S., Brunner, A. & Pinter, G., 22 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  237. Published

    Fatigue behaviour of composite-composite joints reinforced with cold metal transfer welded pins

    Stelzer, S., Ucsnik, S. & Pinter, G., 16 Jul 2015, In: International Journal of Fatigue. 81.2015, December, p. 37-47 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 1 Jul 2015.

    Research output: Contribution to conference › Poster › Research

  239. Published

    Stiffness and strength based modelsfor the fatigue-life predictionof continuously fiber reinforced composites

    Pinter, G. & Maier, J., 1 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  240. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. & Pinter, G., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. Coopenhagen, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Photocleavable epoxy based materials

    Radl, S. V., Kreimer, M., Manhart, J., Grießer, T., Moser, A., Pinter, G., Kalinka, G., Kern, W. & Schlögl, S., 15 Jun 2015, In: Polymer. 2015, Vol.69, July, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    Lightweight Design with Fibre Reinforced Polymers: Optimized and Reliable Components via Flexible Material Architecture

    Pinter, G. & Maier, J., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  243. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  244. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015, 10th International FEMFAT User Meeting 2015 HANDOUT: Ligthweight Design and New Materials. Steyr, 28 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  245. Published

    Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

    Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Jun 2015, In: Polymer Testing. 45, p. 83-92 10 p., 4441.

    Research output: Contribution to journal › Article › Research › peer-review

  246. Published

    Damage propagation in reinforced pipe grade polypropylene under fatigue loads

    Arbeiter, F., Schwab, M., Pinter, G. & Frank, A., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  247. Published

    Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques

    Feuchter, M., Bruckmoser, K., Arbeiter, F. & Pinter, G., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  248. Published

    Nanocomposite Hydrogels - Towards Understanding Origins of Extraordinary high Fracture Toughness

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 15 May 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  249. Published

    Anwendung bruchmechanischer Methoden zur Lebensdauerabschätzung von Kunst- und Verbundwerkstoffen

    Pinter, G., 9 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  250. Published

    Beschleunigte Werkstoffqualifizierung mit dem zyklischen CRB-Test

    Frank, A., Berger, I., Arbeiter, F. & Pinter, G., Apr 2015, In: 3 R. 04-05 2015, p. 74-80

    Research output: Contribution to journal › Article › Research

  251. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., 31 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  252. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  253. Published

    Linear elastic fracture mechanics: a useful tool for lifetime estimation of structures made from thermoplastic polymers

    Arbeiter, F., Berer, M. & Pinter, G., 30 Mar 2015.

    Research output: Contribution to conference › Poster › Research

  254. Published

    New elastomers based on polyurethanes

    Ziegler, W., Winter, J. (Co-editor), Rieß, G., Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 9 Mar 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  255. Published

    Simulation von Delamination in Mehrschichtverbunden

    Fuchs, P., Stelzer, S., Fellner, K., Pothukuchi, H. K. R. & Pinter, G., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  256. Published

    Acetic Acid Transmission Rates of PV Backsheets

    Oreski, G., Brasch, M., Mihaljevic, A., Hirschl, C. & Pinter, G., 2015.

    Research output: Contribution to conference › Poster › Research

  257. Published

    Analyses of viscoelastic solid polymers undergoing degradation

    Davoodi, B., Muliana, A., Tscharnuter, D. & Pinter, G., 2015, In: Mechanics of time-dependent materials. 19, 3, p. 397-417

    Research output: Contribution to journal › Article › Research › peer-review

  258. Published

    Characterization of the mechanical and fatigue behavior of braided composites made of twisted yarns

    Wolfahrt, M., Grosser, J., Fleischmann, M., Schubert, M. & Pinter, G., 2015, In: Materials Science Forum. 825-826, p. 876 882 p.

    Research output: Contribution to journal › Article › Research › peer-review

  259. Published

    Chemical functionalization of composite surfaces for improved structural bonded repairs

    Jölly, I., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. & Schlögl, S., 2015, In: Composites Part B: Engineering. 69, p. 296-303

    Research output: Contribution to journal › Article › Research › peer-review

  260. Published

    Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G., 2015, In: Materials Science Forum. 826-826, p. 883-890 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Computational fatigue life prediction of continuously fibre reinforced multiaxial composites

    Maier, J., Gaier, C. & Pinter, G., 2015, In: Composites Part B: Engineering. 80, p. 269-277 DOI: 10.1016/j.compositesb.2015.06.002.

    Research output: Contribution to journal › Article › Research › peer-review

  262. Published

    curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems

    Moser, A., Feuchter, M., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Degradation of photovoltaic backsheets: Comparison of the aging induced changes on module and component level

    Knausz, M., Oreski, G., Eder, G. C., Voronko, Y., Duscher, B., Koch, T., Pinter, G. & Berger, K. A., 2015, In: Journal of Applied Polymer Science. 132, 24, 42093.

    Research output: Contribution to journal › Article › Research › peer-review

  264. Published

    Development and Implementation of an Accelerated Method for Chlorine Dioxide Exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2015, Proceedings PPS 15.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  265. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    Dispersion of fullerene-like WS2 nanoparticles within epoxy and the resulting fracture mechanics

    Haba, D., Brunner, A. & Pinter, G., 2015, In: Composites science and technology. 119

    Research output: Contribution to journal › Article › Research › peer-review

  267. Published

    Dynamic mechanical response of polyetheretherketone (PEEK) exposed to cyclic loads in the high stress tensile regime

    Berer, M., Tscharnuter, D. & Pinter, G., 2015, In: International Journal of Fatigue. 80, p. 397-405

    Research output: Contribution to journal › Article › Research › peer-review

  268. Published

    Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

    Maier, J. & Pinter, G., 2015, In: International Journal of Fatigue. 75, p. 28-38 DOI: 10.1016/j.ijfatigue.2015.01.014.

    Research output: Contribution to journal › Article › Research › peer-review

  269. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  270. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Evaluation of the Influence of Climate and Microclimate on the Ageing Behaviour of PV

    Hirschmann, B., Oreski, G., Wagner, F. S. & Pinter, G., 2015.

    Research output: Contribution to conference › Poster › Research

  272. Published

    Fatigue Delamination Growth in CFRP Composites: From Pure Mode I and Mode II to Mixed Mode I/II

    Stelzer, S. & Pinter, G., 2015, In: Materials Science Forum. 825-826, p. 914-921 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  274. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015, ICCM20 - 20th International Conference on Composite Materials Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. Published

    Influence of post processing change of the fracture mechanical properties of polyoxymethylene (POM)

    Berer, M., Feuchter, M. & Pinter, G., 2015, PPS2015 - Book of Abstract.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  276. Published

    Influence of the acrylonitrile content on the mechanical properties of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2015, In: GAK (Gummi Fasern Kunststoffe). 68, 11

    Research output: Contribution to journal › Article › Research › peer-review

  277. Published

    Lifetime of polyethylene geomembranes for water proofing of tunnels from the perspective of polymer engineering

    Frank, A., Bredacs, M., Brasch, M., Pinter, G. & Nitsche, D., 2015, Proceedings EUROCK 2015 & 64th Geomechanics Colloquium. Vol. 64.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  278. Published

    Method to characterize the damping behavior of thin passively constrained layer laminates using dynamic mechanical analysis (DMA) in shear mode

    Knapp, G., Oreski, G. & Pinter, G., 2015, In: Polymer Testing. 42, p. 215 224 p.

    Research output: Contribution to journal › Article › Research › peer-review

  279. Published

    Novel composite-composite joining technology with through thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  280. Published

    Point load effect on the buried polyolefin pipes lifetime

    Hutař, P., Majer, Z., Frank, A., Sevcik, M., Zouhar, M., Pinter, G. & Náhlík, L., 2015, In: Polymer engineering and science.

    Research output: Contribution to journal › Article › Research › peer-review

  281. Published

    Software-basierte Methode zur Lebensdauerabschätzung endlosfaserverstärkter Kunststoffe

    Maier, J., Gaier, C., Stelzer, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  282. Published

    Stiffness and strength based models for the fatigue-life prediction of continuously fiber reinforced composites

    Maier, J. & Pinter, G., 2015, In: Advanced materials research. 825-826, p. 960-967

    Research output: Contribution to journal › Article › Research › peer-review

  283. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  284. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  285. Published

    Thermal expansion behavior of solar cell encapsulation materials

    Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K. A., Voronko, Y., Eder, G., Koch, T. & Pinter, G., 2015, In: Polymer Testing. 44, p. 160-167

    Research output: Contribution to journal › Article › Research › peer-review

  286. Published

    Thermoforming of polymer laminate films: Thermo-viscoelastic characterization

    Truszkiewicz, E., Tscharnuter, D., Pilz, G. & Pinter, G., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  287. 2014
  288. Published

    Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins

    Berer, M., Pinter, G. & Feuchter, M., 5 Oct 2014, In: Journal of Applied Polymer Science. 131, 19

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Definition of stress intensity factor development and determination of crack growth kinetics in multi layer polypropylene pipes

    Arbeiter, F., Hutař, P., Pinter, G. & Frank, A., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  290. Published

    Fracture toughness of high density polyethylene: Fatigue precracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodriguez, J., Arbeiter, F., Pinter, G. & Martínez, A. B., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  291. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 22 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  292. Published

    Alterungsbestimmungen an Kupplungsreiblamellen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  293. Published

    BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen

    Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Schwarz, R., Pukel, G. J. & Wiesbrock, F., 2014, Leobener Kunststoff-Kolloquium. p. 207-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  294. Published

    Bericht_WP1_Materialdefinition

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  295. Published

    Bericht_WP2_Definition_Prüfmatrix

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  296. Published

    Bericht_WP3_Definition Probekoerpergeometrie

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  297. Published

    Bericht_WP4_Herstellung Prüfkörper mittels Spritzgießen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  298. Published

    Bericht_WP5_Konzipierung geeigneter Einspannung für Torsionsproben

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  299. Published

    Bericht_WP5_Literaturrecherche_und_Aufbereitung_bereits_vorhandener_Materialdatensaetze

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  300. Published

    Bericht_WP6_Durchführung von quasistatischen und zyklischen Referenzversuchen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  301. Published

    Bestimmung temperaturabhängiger Eigenschaften

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  302. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  303. Published

    Bruchmechanische Methoden zur Abschätzung der Lebensdauer von thermoplastischen Rohrwerkstoffen

    Pinter, G., Frank, A. & Arbeiter, F., 2014, Tagungsband Polymertec 2014. p. 142-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  304. Published

    Challenges in measuring the degree of crosslinking of ethylene vinyl acetate

    Oreski, G., Rauschenbach, A., Hirschl, C., Neumaier, L., Kraft, M. & Pinter, G., 2014, 29th European Photovoltaic Solar Energy Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  306. Published

    Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode

    Knapp, G., Leyrer, M., Oreski, G. & Pinter, G., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition . p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests

    Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  309. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014, 6th World Conference on Photovoltaic Energy Conversion. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  310. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  311. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  312. Published

    Design independent lifetime assessment method for PCBs under low cycle fatigue loading conditions

    Fuchs, P. F., Pinter, G. & Krivec, T., 2014, 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  313. Published

    Determination of aging for different TPE-components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  314. Published

    Determination of aging for three different components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  315. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Pinter, G. & Berer, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  316. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  317. Published

    Determination of mechanical properties

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  318. Published

    Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test

    Kratochvilla, T., Andreas, F. & Pinter, G., 2014, In: Polymer Testing. 40, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  319. Published

    Elementanalyse metallischer Fremkörper

    Klein, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  320. Published

    Ermittlung dynamischer Kennlinien an drei unterschiedlichen Bauteilen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  321. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Brunbauer, J., Pinter, G. & Wolfahrt, M., 2014, Schriftenreihe Kunststofftechnik Leoben Band 4. p. 53-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Maier, J., Wolfahrt, M. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  323. Published

    Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool

    Frank, A. & Pinter, G., 2014, In: Polymer Testing. 38, p. 161-171

    Research output: Contribution to journal › Article › Research › peer-review

  324. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 2014, Fatigue behavior of through the thickness reinforced joints. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  325. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 2014.

    Research output: Contribution to conference › Poster › Research

  326. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  327. Published

    Fatigue life prediction of carbon fibre reinforced laminates by using cycle-dependent classical laminate theory

    Brunbauer, J. & Pinter, G., 2014, In: Composites / B. p. 167-174

    Research output: Contribution to journal › Article › Research › peer-review

  328. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  329. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  330. Published

    Fracture Mechanical Characterization of Nanocomposite Hydrogels

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  331. Published

    FRACTURE MECHANICS LIFETIME PREDICTION OF PRESSURIZED POLYOLEFIN PIPES

    Pinter, G. & Frank, A., 2014, Proceedings 31 ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA. p. 17-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  332. Published

    Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

    Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, In: Journal of Applied Polymer Science. 131, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  333. Published

    HDT measurements and Charpy tests on different materials

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  334. Published

    HDT measurements on different materials

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  335. Published

    Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, In: Mechanics of time-dependent materials. 18, p. 663-684

    Research output: Contribution to journal › Article › Research › peer-review

  336. Published

    Investigations on the Tribological Behaviour of engineering polymers

    Schwab, M., Hausberger, A., Godor, I. & Pinter, G., 2014, 13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014. p. 108-111 4 p. (13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  337. Published

    Kompressions- und Zugversuche an Schäumen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  338. Published

    Longitudinal rail restraint tests of rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  339. Published

    Material Ranking of Polyethylene Pipe grades with Cyclic CRB Tests

    Frank, A. & Pinter, G., 2014, Pipes in Infrastructure 2014. p. 32-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  340. Published

    Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content

    Brunbauer, J., Pinter, G. & Stadler, H., 2014, In: International Journal of Fatigue. 70, p. 85-92

    Research output: Contribution to journal › Article › Research › peer-review

  341. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  342. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 2014, In: Engineering Fracture Mechanics. 116, p. 92-107

    Research output: Contribution to journal › Article › Research › peer-review

  343. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  344. Published

    Monotone Kompressionsversuche an Schäumen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  345. Published

    Numerical lifetime prediction of polymer pipes taking into account residual stress

    Hutar, P., Sevcik, M., Nahlik, L., Frank, A., Kucera, J. & Pinter, G., 2014, In: Key engineering materials. 577-578, p. 169-172

    Research output: Contribution to journal › Article › Research › peer-review

  346. Published

    On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads

    Brunbauer, J. & Pinter, G., 2014, In: Polymer Testing. 40, p. 256-264

    Research output: Contribution to journal › Article › Research › peer-review

  347. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  348. Published

    Polypropylene Multi Layer Pipe Lifetime Assessment Under Realistic Loading Conditions

    Arbeiter, F., Ševčík, M., Pinter, G., Frank, A. & Hutar, P., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  349. Published

    Prediction of residual lifetimes of small diameter polyethylene pipes

    Bredacs, M., Frank, A., Nitsche, D., Riha, A. & Pinter, G., 2014, 17th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Koch, T. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  351. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Koch, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  352. Published

    Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen

    Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G. & Kern, W., 2014, Leobener Kunststoff-Kolloquium. p. 201-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  353. Published

    Simulation of the 'Single Via Thermal Cycle Test' – Finite Element Modelling of PCBs under thermal loads

    Fellner, K., Fuchs, P. & Pinter, G., 2014, 13th Youth Symposium on Experimental Solid Mechanics. p. 29-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  354. Published

    Static and dynamic tests of some rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  355. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  356. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  357. Published

    Technological approach to fatigue life prediction of CFRP

    Brunbauer, J. & Pinter, G., 2014, Eccm-16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  358. Published

    Technological approach to fatigue life prediction of CFRP

    Maier, J. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  359. Published

    Test of a rail damping pad "SGT ZW700"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  360. Published

    Test of rail damping pad "ZW700 and Wpf A204"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  361. Published

    The effect of soil load on fracture behaviour of three-layer polymer pipe for non-pressurised applications

    Ševčík, M., Arbeiter, F., Hutar, P., Pinter, G. & Luboš, N., 2014, In: Key engineering materials. 627, p. 197-200

    Research output: Contribution to journal › Article › Research › peer-review

  362. Published

    Thermokalorimetrische Analyse (DSC) an ABS/PA Bauteilen

    Moser, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  363. Published

    Thermomechanische Charakterisierung von Grünfolien

    Pilz, G. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  364. Published

    Thermo-mechnical characterisation of fluoropolymer films for concentrated solar thermal applications

    Hirschmann, B., Oreski, G. & Pinter, G., 2014, In: Solar energy materials and solar cells. 130, p. 615-622

    Research output: Contribution to journal › Article › Research › peer-review

  365. Published

    Unabhängige Lieferantenkontrolle

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  366. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., Pinter, G. & Frank, A., 2014, Tagungsband Polymertec 2014. p. 175-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  367. Published

    Vibrational analysis of PV modules

    Oreski, G., Knausz, M., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Wassermann, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  368. Published

    Zugversuche an Förderbändern aus kohlenstofffaserverstärktem PEEK

    Stelzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  369. Published

    Zugversuche an Isolatoren

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  370. 2013
  371. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 29 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  372. Published

    Novel composite-composite joining technology with through thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 1 Jan 2013, p. 4645-4653. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  373. Published

    A pressure-dependent nonlinear viscoelastic schapery model for POM

    Tscharnuter, D., Gastl, S. & Pinter, G., 2013, Conference Proceedings of the Society for Experimental Mechanics. p. 139-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  374. Published

    Bestimmung der Druckfestigkeit von PEEK

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  375. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  376. Published

    Bestimmung der Wasseraufnahme von PBT-Bauteilen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  377. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., Pinter, G., Lach, R., Grellmann, W. & Hutar, P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 228-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  378. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., Pinter, G. & Frank, A., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 62-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  379. Published

    Concept for characterisation of fatigue damage and failure of laminated composites by cycle-and stress-dependent stiffness properties

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  380. Published

    Concept for evaluating stiffness degradation of composite materials during fatigue life

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  381. Published

    Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

    Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  382. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  383. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Berer, M. & Pinter, G., 2013, In: Polymer Testing. 32, p. 870-879

    Research output: Contribution to journal › Article › Research › peer-review

  384. Published

    Dynamisch Mechanische Untersuchung (DMA) an VE-GF

    Guttmann, P. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  385. Published

    Elevated Pitting Wear of injection molded PEEK rolls

    Berer, M., Major, Z. & Pinter, G., 2013, In: Wear. 297, p. 1052-1063

    Research output: Contribution to journal › Article › Research › peer-review

  386. Published

    Fatigue Life Calculation of Short Fibre Reinforced Thermoplastic Parts

    Mösenbacher, A., Pichler, P., Brunbauer, J., Guster, C. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  387. Published

    IMPACT OF SINGLE AND DUAL PRESSURE BUTT-WELDING PROCEDURES ON THE RELIABILITY OF PE 100 PIPE WELDS

    Arbeiter, F., Pinter, G. & Frank, A., 2013, Proceedings of Eurotec 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  388. Published

    Interface thickness determination of mineral reinforced multilayer polypropylene pipes using Raman spectroscopy

    Arbeiter, F., Bruckmoser, K. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  389. Published

    Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests

    Redhead, A., Frank, A. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 101, p. 2-9

    Research output: Contribution to journal › Article › Research › peer-review

  390. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Brunbauer, J. & Pinter, G., 2013, DVM-Bericht 140. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  391. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  392. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  393. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013, Die Betriebsfestigkeit als eine Schlüsselfunktion der Zukunft. p. 301-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  394. Published

    Local damage simulations of printed circuit boards based on determined in plane cohesive zone parameters

    Fuchs, P. F., Pinter, G. & Fellner, K., 2013, In: Circuit World. 39, p. 60-66

    Research output: Contribution to journal › Article › Research › peer-review

  395. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  396. Published

    Mechanische und thermische Charakterisierung von einem glasfaserverstärkten Polymer

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  397. Published

    Mode II fatigue delamination resistance of advanced fiber-reinforced polymer–matrix laminates: Towards the development of a standardized test procedure

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., 2013, In: International Journal of Fatigue. 50, p. 57-62

    Research output: Contribution to journal › Article › Research › peer-review

  398. Published

    Monotone Zugversuche an ABS

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  399. Published

    Monotone Zugversuche an Blechen

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  400. Published

    New method of characterizing the fatigue behavior of thin films for acoustic applications at high frequencies

    Knapp, G., Oreski, G. & Pinter, G., 2013, 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013. p. 1600-1604 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  401. Published

    Non-destructive on-line damage monitoring in composites under fatigue loading

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  402. Published

    PCB drop test lifetime assessment based on simulations and cyclic bend tests

    Fuchs, P., Pinter, G. & Major, Z., 2013, In: Microelectronics Reliability. 53, p. 774-781

    Research output: Contribution to journal › Article › Research › peer-review

  403. Published

    Prüfung von Schienenzwischenlagen

    Föttinger, J. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  404. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2013, Proceedings of ECCM 15. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. Published

    Temperaturabhängige Druckuntersuchungen an Kupplungspaketen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  406. Published

    The effect of residual stress on polymer pipe lifetime

    Hutar, P., Sevcik, M., Andreas, F., Nahlik, L., Kucera, J. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 108, p. 98-108

    Research output: Contribution to journal › Article › Research › peer-review

  407. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  408. Published

    Zyklische Prüfung von Rohrverbindungen

    Stelzer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  409. 2012
  410. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.

    Research output: Contribution to conference › Presentation › Research

  411. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 19 Apr 2012.

    Research output: Contribution to conference › Presentation › Research

  412. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 18 Apr 2012, Proc. 3rd Fatigue Symposium, Leoben, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  413. Published

    Accelerated characterization of the resistance against crack initiation and slow crack growth of polyethylene for geomembrane application under the influence of media

    Redhead, A., Frank, A. & Pinter, G., 2012, 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012. p. 1250-1255 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  414. Published

    Accelerated Investigation of Media Impact on Polyethylene Geomembranes

    Redhead, A., Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  415. Published

    Accelerated investigation of the effect of chlorine dioxide on the long-term failure behavior and the material aging of polyethylene for raised temperature resistance

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  416. Published

    Accelerated investigation of the media resistance of polyethylene for geomembrane application

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  417. Published

    Accelerated material ranking with cyclic CRB tests

    Frank, A., Redhead, A., Kratochvilla, T., Dragaun, H. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  418. Published

    Analysis of molecular and morphological effects on slow crack growth in modern PE Pipe grades by cyclic fracture mechanics tests

    Redhead, A., Pinter, G. & Frank, A., 2012, In: Macromolecular Symposia. 311, p. 41-48

    Research output: Contribution to journal › Article › Research › peer-review

  419. Published

    Analysis of the process zone and the mechanism of slow crack growth initiation in high density polyethylene with accelerated cyclic tests

    Redhead, A., Pinter, G. & Frank, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  420. Published

    A pressure-dependent schapery model for polyoxymethylene

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, Proceedings of SEM Annual Conference. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  421. Published

    Bestimmung der Glasübergangstemperaturen an co-extrudierten Platten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  422. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  423. Published

    Bestimmung der Kraft-Deformtionsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  424. Published

    Bestimmung des linearen thermischen Ausdehnungskoeffizienten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  425. Published

    Characterization of the temperature dependent fracture behavior of HNBR based elastomers used in oil and gas industry

    Schrittesser, B., Pinter, G., Schwarz, G., Nagy, T. & Major, Z., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  426. Published

    Comparison of accelerated tests for PE grades lifetime assessment

    Frank, A., Pinter, G., Kapur, M. & Nezbedová, E., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  427. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Frank, A. & Pinter, G., 2012, proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  428. Published

    Determination of the orthotropic material properties of individual layers of printed circuit boards

    Fuchs, P. F., Pinter, G. & Tonejc, M., 2012, In: Microelectronics Reliability. 52, 11, p. 2723-2730

    Research output: Contribution to journal › Article › Research › peer-review

  429. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  430. Published

    Different methodologies to characterize the slow crack growth resistance of polyethylene pipe grades

    Frank, A., Pinter, G., Adib, A., Dominguez, C., Carcia, R. A. & Rodriguez, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  431. Published

    Fracture mechanical testing of PE under the impact of liquid media

    Redhead, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  432. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 2012, Proc. National Sampe Conference & Exhibition. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  433. Published

    Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide

    Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. Venice

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  434. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 103-111

    Research output: Contribution to journal › Article › Research › peer-review

  435. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  436. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  437. Published

    Lifetime prediction of polyethylene pipes

    Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  438. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  439. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  440. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  441. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 2012, In: Composites science and technology. 72, p. 1102-1107

    Research output: Contribution to journal › Article › Research › peer-review

  442. Published

    Modeling of the nonlinear viscoelasticity of polyoxymethylene in tension and compression

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, In: International journal of engineering science. 60, p. 37-52

    Research output: Contribution to journal › Article › Research › peer-review

  443. Published

    Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan Equation

    Frank, A., Hutar, P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 112-121

    Research output: Contribution to journal › Article › Research › peer-review

  444. Published

    Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model

    Janko, M., Ecker, W., Pinter, G. & Kolednik, O., 2012, In: Macromolecular Symposia. 311, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  445. Published

    Optical and mechanical characterization of fluoropolymer films for pneumatic pre-stressed sun concentrators

    Hirschmann, B., Oreski, G., Resch, K. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  446. Published

    Ramanspektroskopische Untersuchungen von Einschlüssen in PCTFE-Folien

    Bruckmoser, K., Pinter, G. & Resch, K., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  447. Published

    Simulation of pipe failures

    Mitev, I. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  448. Published

    Simulations and experiments of open hole tension tests - Assessment of intra-ply plasticity, damage, and localization

    Flatscher, T., Wolfahrt, M., Pinter, G. & Pettermann, H. E., 2012, In: Composites science and technology. 72, p. 1090-1095

    Research output: Contribution to journal › Article › Research › peer-review

  449. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  450. Published

    Surface characterization and functionalization of composites to optimize bonded repairs for aircraft structures

    Jölly, I., Schlögl, S., Wolfahrt, M. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  451. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  452. Published

    Temperature dependent mechanical tests

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  453. Published

    Tensile tests on pipe materials

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  454. Published

    The influence of test frequency and eccentric crack growth on cyclic CRB tests

    Frank, A., Redhead, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  455. Published

    Thermische und mechanische Analysen von ß-Polypropylen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  456. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  457. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  458. Published

    Untersuchungen von PMMA-Lichteinhausungen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  459. Published

    Veränderungen der Struktur und der mechanischen Eigenschaften von polymeren Nanokompositen durch Variation der Prozessparameter beim Compoundieren

    Feuchter, M., Pinter, G., Maier, G., Witschnigg, A., Kracalik, M. & Laske, S., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 77-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  460. Published

    Zugprüfungen an Folien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  461. 2011
  462. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 10 Nov 2011.

    Research output: Contribution to conference › Presentation › Research

  463. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 11 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  464. Published

    Delamination resistance of advanced fiber-reinforced polymer-matrix laminates under fatigue loading: Approaches for Mode II and Mixed Mode I/II testing

    Brunner, A., Stelzer, S., Dell'Anno, G., Pinter, G. & Terrasi, G. P., 5 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  465. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Development Of A Standardized Test Procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 15 Apr 2011.

    Research output: Contribution to conference › Presentation › Research

  466. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 13 Apr 2011, Proc. 11th International Conference on Interfacial Phenomena on Composite Materials, Cambridge, UK.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  467. Published

    Accelerated investigation of the influence of aggressive media on the resistance to slow crack growth of polyethylene for geomembrane applications

    Redhead, A., Pinter, G. & Frank, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  468. Published

    Analyse zweier Spritzgussteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  469. Published

    Analyse zweier Spritzgussteile II

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  470. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011, In: Engineering Fracture Mechanics. 78, p. 3049-3058

    Research output: Contribution to journal › Article › Research › peer-review

  471. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  472. Published

    Basischarakterisierung einer Polyethylen-Rohrummantelung

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  473. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Mösenbacher, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  474. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten - eine durchgängige Simulationskette von der Spritzgusssiumulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Mösenbacher, A., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 163-167

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  475. Published

    Bewitterungsuntersuchungen an PMMA-Linsen

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  476. Published

    Characterization of crack initiation and slow crack growth in polyethy-lene with cyclic cracked round bar tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Bensason, S. & Pinter, G., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 2214-2219 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  477. Published

    Characterization of Crack initiation and Slow Crack Growth in Polyethylene with Cyclic Cracked Round Bar Tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Pinter, G. & Bensason, S., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 2214-2219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  478. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  479. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G. & Pinter, G., 2011, 26th European Photovoltaic Solar Energy Conference and Exhibition (26th EU PVSEC). p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  480. Published

    Continious Simulation Loop for Fatigue Life Calculation of Short Fiber Reinforced Plastics Components

    Mösenbacher, A., Guster, C., Fleischer, H., Pinter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  481. Published

    Development of an instrumented autoclave for rapid gas decompression experiments

    Major, Z., Schrittesser, B. & Pinter, G., 2011, Tagung „Innovation Messtechnik“. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  482. Published

    Durchstoßversuch an unterschiedlichen Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  483. Published

    Dynamisch Mechanische Analyse an einem TPE Werkstoff

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  484. Published

    Dynamisch-mechanische Analyse an Tennissaiten

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  485. Published

    Dynamisch mechanische Untersuchungen an PTFE Werkstoffen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  486. Published

    Effect of the process parameter yarn width on the mechanical and fatigue behaviour of braided composite materials

    Wolfahrt, M., Zaremba, S., Reden von, T. & Pinter, G., 2011, of the 16th International Conference on Composite Structures (ICCS16). p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  487. Published

    Effects of the Processing History on the Crack Kinetics in a Polyethylene Pipe Grade

    Redhead, A., Frank, A. & Pinter, G., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 1414-1418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  488. Published

    Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstolerenz von Geflechtlaminaten

    Berger, I., Pinter, G. & Wolfahrt, M., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 187-181

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  489. Published

    Einfluss von Defekten auf das Langzeitermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  490. Published

    Einfluss von Defekten auf das Langzeit Ermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 169-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  491. Published

    Ermittlung der HDT Formbeständigkeitstemperatur an 5 Harzwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  492. Published

    Evaluation of a Simulation Process for Fatigue Life Calculation of Short Fibre Reinforced Plastic Components

    Guster, C., Pinter, G., Mösenbacher, A. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 2104-2109

    Research output: Contribution to journal › Article › Research › peer-review

  493. Published

    Impact of chemical and physical properties of H-NBR based elastomers on the rapid gas decompression performance

    Schrittesser, B. & Pinter, G., 2011,

    Proceedings of High Performance Thermoplastics & Composites for Oil and Gas Applications

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  494. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei -20 °C

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  495. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei Raumtemperatur

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  496. Published

    Investigation of the chemical resistance and the material aging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Paper › peer-review

  497. Published

    Investigation of the chemical resistance and the material anging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011, SPE-EUROTEC 2011. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  498. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  499. Published

    Kerbschlaguntersuchungen an ABS-Compounds

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  500. Published

    Kerbschlaguntersuchungen an Erdölcutingproben

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  501. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  502. Published

    Mechanische Prüfungen an ABS-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  503. Published

    Mechanische Prüfungen an unterschiedlichen Polypropylentypen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  504. Published

    Mechanische und thermo-mechanische Untersuchungen an PIM Feedstock-Grünteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  505. Published

    Mechanische Untersuchungen an mineralisch gefüllten Polypropylen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  506. Published

    Mikroskopie an Bruchflächen mehrerer Bauteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  507. Published

    Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung

    Tscharnuter, D., Gastl, S. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 142-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  508. Published

    Physikalische Prüfungen von Elastomer-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  509. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  510. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  511. Published

    Schlagbiegeuntersuchungen an gefüllten Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  512. Published

    Statische Zugversuche an Compositerohren

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  513. Published

    Thermo-kalorimetrische Untersuchung an Duromerwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  514. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Contact

Phone: 2100

Curriculum vitae

Gerald Pinter Öffentliches Curriculum

Latest Research Output

View more (758)