Montanuniversität

Organisational unit: University

501 - 550 out of 30,152Page size: 50

Publications / Theses

  1. 2021
  2. Published

    Investigation of particle-specific characteristics of non-hazardous, fine shredded mixed waste

    Weißenbach, T. & Sarc, R., 1 Jan 2021, In: Waste management. 119, 119, p. 162 - 171 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 1 Jan 2021, In: Materials and Design. 197, 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Sucker Rod Antibuckling System: Development and Field Application

    Langbauer, C., Fruhwirth, R. & Volker, L. J., 1 Jan 2021, In: SPE production & operations. 2021, doi.org/10.2118/205352-PA

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Alternative Transfer Chute System

    Prenner, M., Jan 2021, In: Mining Report Glückauf. 157.2021, 1, p. 78-86 9 p.

    Research output: Contribution to journal › Article › Research

  6. Published

    Effect of Pt nanoparticle decoration on the H2 storage performance of plasma-derived nanoporous graphene

    Kostoglou, N., Liao, C.-W., Wang, C.-Y., Kondo, J. N., Tampaxis, C., Steriotis, T., Giannakopoulos, K., Kontos, A. G., Hinder, S. J., Baker, M., Bousser, E., Matthews, A., Rebholz, C. & Mitterer, C., Jan 2021, In: Carbon. 171, 171, p. 294-305 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Lithium-Ion Batteries as Ignition Sources in Waste Treatment Processes—A Semi-Quantitate Risk Analysis and Assessment of Battery-Caused Waste Fires

    Nigl, T., Baldauf, M., Hohenberger, M. & Pomberger, R., Jan 2021, In: Processes : open access journal. 9, 1, p. 1-12 12 p., 49.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., Jan 2021, In: Additive Manufacturing. 37, January 2021, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    MINERALOGICAL, BIB-SEM AND PETROPHYSICAL DATA IN SEAL ROCK ANALYSIS: A CASE STUDY FROM THE VIENNA BASIN, AUSTRIA

    Misch, D., Siedl, W., Drews, M., Liu, B., Klaver, J., Pupp, M. & Sachsenhofer, R., Jan 2021, In: Journal of Petroleum Geology. 44, 1, p. 25-45 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P. & Kiener, D., Jan 2021, In: Materials characterization. 171.2021, January, 110822.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermomechanical and structural characterization of polybutadiene/poly(ethylene oxide)/CNT stretchable electrospun fibrous membranes

    Gürbüz, R., Sarac, B., Soprunyuk, V., Yüce, E., Eckert, J., Ozcan, A. & Sarac, A. S., Jan 2021, In: Polymers for Advanced Technologies. 32, 1, p. 248-261 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Über theoretische und reale Recyclingfähigkeit

    Pomberger, R., Jan 2021, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . p. 24 - 35 10 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Abgrenzung und Überlappung des europäischen Chemikalien- und Abfallrechts und Auswirkungen auf die Abfallwirtschaft

    Breiner, D., 2021

    Research output: Thesis › Master's Thesis

  16. Published

    A contribution of Middle – Late Jurassic Mélanges in the Northern Calcareous Alps (Raucherschober/Schafkogel) and the Inner Western Carpathians (Jaklovce) to the reconstruction of the Triassic – Jurassic passive and active Neo-Tethys distal continental margin

    Drvoderic, S., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Additive manufacturing of highly textured alumina ceramics

    Hofer, A.-K., Kraleva, I. & Bermejo, R., 2021, In: Open ceramics. 100085.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Additive manufacturing of high-strength alumina through a multi-material approach

    Schlacher, J. C., Hofer, A.-K., Geier, S., Kraleva, I. R., Papsik, R., Schwentenwein, M. & Bermejo, R., 2021, In: Open ceramics. 5, 100082.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Additive manufacturing of magnesium alloy using uniform droplet spraying: modeling of microstructure evolution

    Jaffar, S. M., Kostoglou, N., Fukuda, H., Rebholz, C., Ando, T., Liao, Y. & Doumanidis, C. C., 2021, In: MRS Advances. 2021, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Adsorption of Cholesterol by Carbon Nanotubes

    Vakhrushev, A. (Illustrator), 2021

    Research output: Book/Report › Book › Research

  22. Published

    Advanced Approach of SRP Downhole Dynamometer Evaluation - Proof of Concept

    Gattuso, E., 2021

    Research output: Thesis › Master's Thesis

  23. Published

    Advanced in situ electrochemical nanoindentation testing for understanding hydrogen-materials interactions

    Ebner, A., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Advances of materials for ion-selective membranes for extraction of Lithium ions out of saline water

    Raggam, S., 2021

    Research output: Thesis › Master's Thesis

  25. Published

    A lower bound for Cusick’s conjecture on the digits of n + t

    Spiegelhofer, L., 2021, In: Mathematical proceedings of the Cambridge Philosophical Society. 2021, 23 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Alteration-induced volcano instability at La Soufrière de Guadeloupe (Eastern Caribbean)

    Heap, M. J., Baumann, T., Rosas-Carbajal, M., Komorowski, J.-C., Gilg, H. A., Villeneuve, M., Moretti, R., Baud, P., Carbillet, L., Harnett, C. & Reuschlé, T., 2021, In: Journal of geophysical research.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    A multiscale structural investigation of metallic glass composites with advanced electron microscopic methods

    Fellner, S., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    An additively manufactured titanium alloy in the focus of metallography

    Fleißner-Rieger, C., Pogrielz, T., Obersteiner, D., Pfeifer, T., Clemens, H. & Mayer, S., 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 1, p. 4-31 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Analysis of Gas Trading - Examination of Gas Sales Agreements and Adaption of a ComFin Software Module

    Weninger, F., 2021

    Research output: Thesis › Master's Thesis

  30. Published

    Analysis of the strain information from nanodiffraction data

    Schretter, L., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Analysis of waste energy potential at compressor station and increase of its use

    Mullayanova, A., 2021

    Research output: Thesis › Master's Thesis

  32. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., 2021, In: Computational materials science. 2021, 197, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A New Drop Test Rig for Kiirunavaara Mine

    Ungerer, K., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    A new heuristic and an exact approach for a production planning problem

    Auer, P., Dósa, G., Dulai, T., Fügenschuh, A., Näser, P., Ortner, R. & Werner-Starkne, A., 2021, In: Central European Journal of Operations Research. 29.2021, September, p. 1079-1113 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Anlagenkonzeption für die Scholz Rohstoffhandel GmbH am Standort Laxenburg

    Bauernfeind, F., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    A Positioning System for Mobile Equipment based on Ultra Wideband Radio

    Plessing, L., 2021

    Research output: Thesis › Master's Thesis

  37. Published

    A simple method to model buckling slope instability using continuum numerical models

    Ridl, R., Bell, D., Villeneuve, M. & MacFarlane, D., 2021, Rocscience International Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Aufbau eines Versuchsstandes zur Entfernung von Quecksilber aus Erdöl

    Rokita, M., 2021

    Research output: Thesis › Master's Thesis

  39. Published

    Ausbildung und Training am ZAB

    Galler, R., 2021, In: Stein & Kies : Wissenswertes zur Gewinnung mineralischer Rohstoffe in Österreich. Jan-Feb 2021, 170, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  40. Published

    Auswirkungen intergranularer Oxidation auf die Oberflächenrissbildung beim Stranggießen von Stahl

    Gaiser, G., 2021

    Research output: Thesis › Master's Thesis

  41. Published

    Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., 2021, In: Steel research international. 2021, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Bewertung des Einsatzes des Wertstoffscanners bei der Sammlung von gemischtem Siedlungsabfall

    Pum, R., 2021

    Research output: Thesis › Master's Thesis

  44. Published

    Buckling Analysis of an Uncemented Tieback During Production, Injection and Pressure Tests

    Ulrich, B., 2021

    Research output: Thesis › Master's Thesis

  45. Published

    Bulk inclusion micro-zircon U–Pb geochronology: A new tool to date low-grade metamorphism

    Hollinetz, M. S., Schneider, D., McFarlane, C. R. M., Huet, B., Rantitsch, G. & Grasemann, B., 2021, In: Journal of metamorphic geology. 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Burial, accretion, and exhumation of the Oman-UAE metamorphic sole

    Ambrose, T., Searle, M., Waters, D., Gopon, P. & Forshaw, J., 2021, In: Tectonics. 40

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Business Model Innovation in the Fields of Industrial Goods: Designing a Framework

    Hechtl, B., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    CALPHAD assessment of the Ti-W system including experimental and ab-initio data

    Spitaler, T. & Romaner, L., 2021.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 2021, In: Surface & coatings technology. 2021, 421, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Cathodic arc evaporated high-entropy alloy-based metallic and nitride coatings

    Wasenbelz, F., 2021

    Research output: Thesis › Master's Thesis

  51. Published

    Challenges in production and distribution of low-tonnage LNG

    Mikriukov, P., 2021

    Research output: Thesis › Master's Thesis

Previous 1...7 8 9 10 11 12 13 14 ...604 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402