Chair of Polymer Processing (350)

Organisational unit: Chair

51 - 100 out of 768Page size: 50

Publications / Theses

  1. 2019
  2. Published

    Physical foaming and crosslinking of polyethylene with modified talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 1 Sept 2019, In: Polymers. 11, 9, 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  5. Published

    Determination of the material data for the PA66-Compound

    Duretek, I., 20 Aug 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  6. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzalez-Gutierrez, J., 7 Aug 2019, In: Polymers / Molecular Diversity Preservation International. 11, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  9. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Investigations of rheological behaviour of two PIM-feedstocks (Catamold 17-4PH)

    Duretek, I., 30 Jul 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  11. Published

    Determination of the material data for one TPU-compound

    Duretek, I., 24 Jul 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Jul 2019, In: Journal of Applied Polymer Science. 137.2020, 2, 10 p., 48269.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing

    Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Jul 2019. 1 p.

    Research output: Contribution to conference › Abstract

  14. Published

    Determination of the material data for ZY-Feedstock

    Duretek, I., 1 Jul 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    Vergleichende REM-Analyse vier verschiedenen PP-Extrudaten

    Duretek, I., 28 Jun 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Determination of the material data for PIM-feedstock "2"

    Duretek, I., 12 Jun 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  18. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP EPDM T20

    Duretek, I., 25 May 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Microscopic examination of 3 melt filter

    Duretek, I., 22 May 2019, 25 p.

    Research output: Book/Report › Commissioned report › Research

  20. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Determination of the material data for the CIM-feedstock "1"

    Duretek, I., 15 May 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Determination of the material data for the PIM-feedstock "2"

    Duretek, I., 15 May 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

    Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. & Schlögl, S., 2 May 2019, In: International journal of biomaterials . 2019, p. 2019 12 p., Article ID 2393481.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Determination of the material data for the CIM-feedstock "3"

    Duretek, I., 30 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  26. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Optimisation of the interfacial bonding in polypropylene filled with different types of glass spheres produced by extrusion-based additive manufacturing

    Spörk, M. & Gonzalez-Gutierrez, J., 8 Apr 2019, p. 87-87. 1 p.

    Research output: Contribution to conference › Abstract

  31. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  32. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Determination of the material data for the CIM-feedstock "2"

    Duretek, I., 4 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein gefülltes Polypropylen

    Duretek, I., 28 Mar 2019, 10 p.

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein ungefülltes Polypropylen

    Duretek, I., 14 Mar 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  37. Published

    Vergleichende MFR Messungen an 6 PP Proben mit unterschiedlicher thermomechanischer Vorgeschichte

    Duretek, I. & Wallner, A., 14 Mar 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für ein PBT-Compound

    Duretek, I., 18 Feb 2019, 19 p.

    Research output: Book/Report › Commissioned report › Research

  40. Published

    Bestimmung der Viskosität an zwei Polyvinylidenfluoriden

    Duretek, I., 6 Feb 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  41. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, p. 1 - 5 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Bestimmung der Materialdaten an einem PA6

    Duretek, I., 4 Feb 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  43. Published

    Die rheologischen Stoffdatenbestimmung für zwei thermoplastischen Compounds (PPS- und PA12-Blends)

    Duretek, I., 27 Jan 2019

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Fused Filament Fabrication (FFF) of Metal-Ceramic Components

    Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Abschätzung der Schaumeigenschaften durch Messung der rheologischen Materialeigenschaften und gezielte Beeinflussung der Schaummorphologie durch Anpassung der Materialformulierungen und Düsengeometrie in der Schaumextrusion

    Walluch, M., 2019

    Research output: Thesis › Doctoral Thesis

  46. Published

    Anwendung von Holz-Kunststoff-Verbundwerkstoffen für die additive Fertigung

    Krainer, M., 2019

    Research output: Thesis › Master's Thesis

  47. Published

    Biofunktionelle Kunststoffimplantate durch additive Fertigung für die kraniomaxillofaziale Chirurgie

    Katschnig, M., 2019

    Research output: Thesis › Doctoral Thesis

  48. Published

    Development of feedstocks for extrusion based additive manufacturing for catalytic debinding

    Hentschel, L., 2019

    Research output: Thesis › Master's Thesis

  49. Published

    Effect of compatibilizers on blends of immiscible polymers containing polyolefins

    Schuster, F., 2019

    Research output: Thesis › Master's Thesis

  50. Published

    Experimental and numerical investigation of special flow phenomena in powder injection molding

    Schwaiger, M., 2019

    Research output: Thesis › Master's Thesis

  51. Published

    High-Density Polyethylene as Phase-Change Material: Long-Term Stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 2019.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501