Acta materialia, ‎1359-6454

Journal

ISSNs1359-6454
Additional searchable ISSN (electronic)1873-2453
1 - 217 out of 217Page size: 500

Publications / Theses

  1. 2022
  2. Published

    Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

    Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237, 118191.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

    Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Jun 2022, In: Acta Materialia. 232, 117935.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2021
  5. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 2021, 215, 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density

    Ketov, S. V., Ivanov, Y. P., Putz, B., Zhang, Z., Eckert, J. & Greer, A. L., 1 Aug 2021, In: Acta Materialia. 214, 116993.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Nayak, G. K., Renk, O., Holec, D., Mayrhofer, P. H. & Zhang, Z., 21 May 2021, In: Acta materialia. 214.2021, 1 August, 11 p., 117004.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Real-time atomic-resolution observation of coherent twin boundary migration in CrN

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Sheng, H., Gammer, C., Holec, D. & Zhang, Z., 11 Feb 2021, In: Acta materialia. 208.2021, 15 April, 13 p., 116732.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys

    LI, J., Hage, F. S., Ramasse, Q. M. & Schumacher, P., 15 Jan 2021, In: Acta materialia. 206.2021, March, 9 p., 116652.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation

    Holzapfel, D. M., Music, D., Hans, M., Wolff-Goodrich, S., Holec, D., Bogdanovski, D., Arndt, M., Eriksson, A. O., Yalamanchili, K., Primetzhofer, D., Liebscher, C. & Schneider, J. M., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices

    Buchinger, J., Wagner, A., Chen, Z., Zhang, Z., Holec, D., Mayrhofer, P. H. & Bartosik, M., 2021, In: Acta materialia. 2021, 202, p. 376-386

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance

    Koutná, N., Brenner, A., Holec, D. & Mayrhofer, P. H., 2021, In: Acta materialia. 2021, 206, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, p. 1-11 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Theoretical investigation of the 70.5° mixed dislocations in body-centered cubic transition metals

    Romaner, L., Pradhan, T., Kholtobina, A., Drautz, R. & Mrovec, M., 2021, In: Acta materialia. p. 117154 1-10 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 31 Dec 2020, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Initiation of fatigue damage in ultrafine grained metal films

    Glushko, O. & Kiener, D., 27 Dec 2020, In: Acta Materialia. 206.2021, March, 10 p., 116599.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 20 Nov 2020, (E-pub ahead of print) In: Acta materialia. 204.2021, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 15 Sept 2020, In: Acta materialia. 2020, 197, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    The role of crystallographic texture on mechanically induced grain boundary migration

    Renk, O., Ghosh, P., Sabat, R. K., Eckert, J. & Pippan, R., 9 Sept 2020, (E-pub ahead of print) In: Acta Materialia. 200.2020, November, p. 404-416 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Age-hardening response of AlMgZn alloys with Cu and Ag additions

    Stemper, L., Tunes, M. A., Oberhauser, P., Uggowitzer, P. J. & Pogatscher, S., 15 Aug 2020, In: Acta Materialia. 195.2020, August, p. 541–554 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

    Coleman, K., Bermejo, R., Leguillon, D. & Trolier-McKinstry, S., Jun 2020, In: Acta Materialia. 191, p. 245-252

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction

    Todt, J., Krywka, C., Zhang, Z. L., Mayrhofer, P. H., Keckes, J. & Bartosik, M., 29 May 2020, In: Acta Materialia. 195.2020, 15 August, p. 425-432 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy

    Alfreider, M., Issa, I., Renk, O. & Kiener, D., 15 Feb 2020, In: Acta Materialia. 185.2020, 15 February, p. 309-319 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

    Klünsner, T., Lube, T., Gettinger, C., Walch, L. & Pippan, R., 12 Feb 2020, In: Acta materialia. 188, p. 30-39

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Chemical bonding effects on the brittle-to-ductile transition in metallic glasses

    Moitzi, F., Şopu, D., Holec, D., Perera, D., Mousseau, N. & Eckert, J., 10 Feb 2020, In: Acta Materialia. 188.2020, 15 April, p. 273-281 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, (E-pub ahead of print) In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams

    Sorensen, D., Hintsala, E., Stevick, J., Pischlar, J., Li, B., Kiener, D., Myers, J. C., Jin, H., Liu, J., Stauffer, D., Ramirez, A. J. & Ritchie, R. O., 15 Jan 2020, In: Acta Materialia. 183.2020, 15 January, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution

    Zhao, M., Issa, I., Pfeifenberger, M. J., Wurmshuber, M. & Kiener, D., 1 Jan 2020, In: Acta Materialia. 182.2020, 1 January, p. 215-225 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mapping the mechanical properties in nitride coatings at the nanometer scale

    Zhang, Z., Chen, Z., Holec, D., Liebscher, C., Koutná, N., Bartosik, M., Zheng, Y. H., Dehm, G. & Mayrhofer, P. H., 2020, In: Acta materialia. 2020, 194, p. 343-353

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2019
  34. Published

    Assessment of ductile character in superhard Ta-C-N thin films

    Glechner, T., Hahn, R., Wojcik, T., Holec, D., Kolozsvari, S., Zaid, H., Kodambaka, S., Mayrhofer, P. H. & Riedl, H., 15 Oct 2019, In: Acta materialia. 179, p. 17-25 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers

    Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pippan, R. & Sun, J., 7 Sept 2019, In: Acta Materialia. 180.2019, November, p. 73-83 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials

    Pfeifenberger, M. J., Nikolić, V., Žák, S., Hohenwarter, A. & Pippan, R., 1 Sept 2019, In: Acta Materialia. 176, p. 330-340 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Thermodynamics of an austenitic stainless steel (AISI-348) under in situ TEM heavy ion irradiation

    Tunes, M. A., Greaves, G., Kremmer, T., Vishnyakov, V. M., Edmondson, P. D., Donnelly, S. E., Pogatscher, S. & Schön, C. G., 27 Aug 2019, In: Acta Materialia. 179, p. 360-371 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Transmission Electron Microscopy study of the neutron-irradiation response of Ti-based MAX phases at high temperatures

    Tunes, M. A., Harrison, R. W., Donnelly, S. E. & Edmondson, P. D., 8 Mar 2019, In: Acta Materialia. 169.2019, May, p. 237-247 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Rate limiting deformation mechanisms of bcc metals in confined volumes

    Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 2019, 165, p. 409-419 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN / AlN multilayers

    Chen, Z., Holec, D., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 2019, In: Acta materialia. 168.2019, 15 April, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F.-D. & Svoboda, J., 2019, In: Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    On Solute Depletion Zones Along Grain Boundaries During Segregation

    Scheiber, D., Svoboda, J., Fischer, F.-D. & Romaner, L., 2019, In: Acta materialia. 182, p. 100-107

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2018
  49. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

    Wang, Z., Prashanth, K. G., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2, p. 157-166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

    Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Metallic glass nanolaminates with shape memory alloys

    Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, (E-pub ahead of print) In: Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition

    Kormout, K. S., Ghosh, P., Bachmaier, A., Hohenwarter, A. & Pippan, R., 8 May 2018, In: Acta Materialia. 154.2018, 1 August, p. 33-44 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

    Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P. & Hohenwarter, A., 1 Jan 2018, In: Acta materialia. 142, p. 201-212 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018, In: Acta materialia. p. 193-205

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2017
  60. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure

    Liu, J., Li, J., Hage, F., Ghosh, P., Li, J., Wang, W., Chen, Z., Wang, T., Tang, W., Ramasse, Q. & Schumacher, P., 6 Apr 2017, In: Acta materialia. 131.2017, June, p. 169-186 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

    Kosiba, K., Scudino, S., Kobold, R., Kühn, U., Greer, A. L., Eckert, J. & Pauly, S., Apr 2017, In: Acta Materialia. 127, p. 416-425

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Prashanth, K. G., Scudino, S. & Eckert, J., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 25-35 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Fatigue crack growth anisotropy in ultrafine-grained iron

    Leitner, T., Hohenwarter, A., Ochensberger, W. & Pippan, R., 1 Mar 2017, In: Acta materialia. 126, p. 154-165 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    In-situ observation of coupled peritectic growth in a binary organic model alloy

    Ludwig, A., Mogeritsch, J. P. & Pfeifer, T., 1 Mar 2017, In: Acta Materialia. 126, p. 329-335 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F. D. & Svoboda, J., 2017, In: Acta materialia. 129, p. 331-342

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Electric-field-induced structural changes in multilayer piezoelectric actuators during electrical and mechanical loading

    Esteves, G., Fancher, C. M., Röhrig, S., Maier, G. A., Jones, J. L. & Deluca, M., 2017, In: Acta materialia. 132, p. 96-105 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M., Mitterer, C. & Keckes, J., 2017, In: Acta materialia. 122, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

    Merle, B., Maier-Kiener, V. & Pharr, G. M., 2017, In: Acta materialia. 134, p. 167-176

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., No, M. L., Juan, J. S., Clemens, H. & Mayer, S., 2017, In: Acta materialia. 127, p. 440-450

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 2017, In: Acta materialia. 131, p. 391-399

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences

    Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F. D. & Dehm, G., 2017, In: Acta materialia. 124, p. 195-203

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Systematic ab initio investigation of the elastic modulus in quaternary transition metal nitride alloys and their coherent multilayers

    Wang, F., Holec, D., Odén, M., Mücklich, F., Abrikosov, I. A. & Tasnádi, F., 2017, In: Acta materialia. 127, p. 124-132 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    The contribution of 180° domain wall motion to dielectric properties quantified from in situ X-ray diffraction

    Fancher, C. M., Brewer, S., Chung, C. C., Röhrig, S., Rojac, T., Esteves, G., Deluca, M., Bassiri-Gharb, N. & Jones, J. L., 2017, In: Acta materialia. 126, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    The enhanced theta-prime (q0) precipitation in an Al-Cu alloy with trace Au additions

    Chen, Y., Zhang, Z., Chen, Z., Tsalanidis, A., Weyland, M., Findlay, S., J. Allen, L., Li, J., V. Medhekar, N. & Bourgeois, L., 2017, In: Acta materialia. 125, p. 340-350 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2016
  78. Published

    Interface dominated mechanical, properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., Dec 2016, In: Acta materialia. 121, p. 104-116

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Prillhofer, R., Ebner, T., Curtin, W. A., Uggowitzer, P. J. & Pogatscher, S., 1 Oct 2016, In: Acta materialia. 118, p. 296-305 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys

    Wang, X. H., Inoue, A., Kong, F. L., Zhu, S. L., Stoica, M., Kaban, I., Chang, C. T., Shalaan, E., Al-Marzouki, F. & Eckert, J., 1 Sept 2016, In: Acta materialia. 116, p. 370-381 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

    Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O. & Ramamurty, U., 15 Aug 2016, In: Acta materialia. 115, p. 285-294 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction

    Shakur Shahabi, H., Scudino, S., Kaban, I., Stoica, M., Escher, B., Menzel, S., Bm Vaughan, G., Kühn, U. & Eckert, J., 1 Jun 2016, In: Acta materialia. 111, p. 187-193 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 15 May 2016, In: Acta materialia. 110, p. 283-294 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M. W., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 1 Mar 2016, In: Acta materialia. 106, p. 239-248 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Manipulation of free volumes in a metallic glass through Xe-ion irradiation

    Bian, X. L., Wang, G., Chen, H. C., Yan, L., Wang, J. G., Wang, Q., Hu, P. F., Ren, J. L., Chan, K. C., Zheng, N., Teresiak, A., Gao, Y. L., Zhai, Q. J., Eckert, J., Beadsworth, J., Dahmen, K. A. & Liaw, P. K., 1 Mar 2016, In: Acta materialia. 106, p. 66-77 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Structure-property relationships in nanoporous metallic glasses

    Şopu, D., Soyarslan, C., Sarac, B., Bargmann, S., Stoica, M. & Eckert, J., 1 Mar 2016, In: Acta materialia. 106, p. 199-207 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In: Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys

    Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G. & Schumacher, P., 2016, In: Acta materialia. 111, p. 85-95 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Grain refinement of hypoeutectic Al-Si alloys with B

    Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X. & Wang, T., 2016, In: Acta materialia. 120, p. 168 178 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy

    Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F. & Schumacher, P., 2016, In: Acta materialia. 108, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Strain-induced phase transformation of a thin Co film on flexible substrates

    Marx, V. M., Kirchlechner, C., Breitbach, B., Cordill, M., Többens, D. M., Waitz, T. & Dehm, G., 2016, In: Acta materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The bulk and interfacial structures of the η (Al2Au) precipitate phase

    Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. 2015
  102. Published

    Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

    Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 22 Aug 2015, In: Acta materialia. 98, p. 423-432 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses

    Thurnheer, P., Maaß, R., Laws, K. J., Pogatscher, S. & Löffler, J. F., 29 Jul 2015, In: Acta materialia. 96, p. 428-436 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Modification of eutectic Si in Al-Si alloys with Eu addition

    Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z. & Schumacher, P., 1 Feb 2015, In: Acta materialia. 84, p. 153-163 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Acta materialia. 94, p. 205-213

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P. H., 2015, In: Acta Materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P., 2015, In: Acta materialia. 83, p. 276-284

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Nitrogen atom shift and the structural change in chromium nitride

    Wan, P., Zhang, Z., Holec, D., Daniel, R., Mitterer, C. & Duan, H., 2015, In: Acta materialia. 98, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Origin of temperature-induced low friction of sputtered Si-containing amorphous carbon coatings

    Jantschner, O., Field, S. K., Holec, D., Fian, A., Music, D., Schneider, J. M., Zorn, K. & Mitterer, C., 2015, In: Acta materialia. 82, p. 437-446

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Solute adsorption and entrapment during eutectic Si growth in Al-Si-based alloys

    Li, J., Albu, M., Hofer, F. & schumacher, P., 2015, In: Acta materialia. 83, p. 187-202

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journal › Article › Research › peer-review

  115. 2014
  116. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Grain boundary excess volume and defect annealing of copper after high-pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E. M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 15 Apr 2014, In: Acta materialia. 68, p. 189-195 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

    Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In: Acta materialia. 73, p. 240-250

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In: Acta materialia. 67, p. 335-341

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Grain boundary excess volume and defect annelaing of copper after high pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E.-M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 2014, In: Acta materialia. 68, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Improvements of Strength and Fracture Restistance by Spatial Material Property Variations

    Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P., 2014, In: Acta materialia. 68, p. 279-294

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction

    Vaxelaire, N., Labat, S., Cornelius, T., Kirchlechner, C., Keckes, J., Schülli, T. & Thomas, O., 2014, In: Acta materialia. 78, p. 46-55

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Nucleation Kinetics of Entrained Eutectic Si in Al-5Si Alloys

    Li, J., Zarif, M. Z., Albu, M., McKay, B., Hofer, F. & Schumacher, P., 2014, In: Acta materialia. 72, p. 80-98

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Reverse alpha' to gamma transformation mechanisms of martensitic Fe–Mn and age-hardenable Fe–Mn–Pd alloys upon fast and slow continuous heating

    Moszner, F., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J., Estrin, Y., Gerstl, S. S. A., Kozeschnik, E. & Löffler, J. F., 2014, In: Acta materialia. 72, p. 99-109

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Thermodynamic Extremal Principles for Irreversible Processes in Materials Science

    Fischer, F. D., Svoboda, J. & Petryk, H., 2014, In: Acta materialia. 67, p. 1-20

    Research output: Contribution to journal › Article › Research › peer-review

  132. 2013
  133. Published

    A Variational Approach to Grooving and Wetting

    Hackl, K., Fischer, F. D., Klevakina, K., Renner, J. & Svoboda, J., 2013, In: Acta materialia. 61, p. 1581-1591

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Detailed Modelling of Delamination Buckling of Thin Film Under Global Tension

    Toth, F., Rammerstorfer, F. G., Cordill, M. & Fischer, F. D., 2013, In: Acta materialia. 61, p. 2425-2433

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion – Experiments and Model

    Fischer, F. D., Svoboda, J. & Schillinger, W., 2013, In: Acta materialia. 61, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms

    Hohenwarter, A. & Pippan, R., 2013, In: Acta materialia. 61, p. 2973-2983

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    In situ observation of austenite–ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjäger, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In: Acta materialia. 61, p. 2414-2424

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite

    Vojtek, T., Pippan, R., Hohenwarter, A., Holan, L. & Pokluda, J., 2013, In: Acta materialia. 61, p. 4625-4635

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journal › Article › Research › peer-review

  141. 2012
  142. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Derivation of the Phase Field Equations from the Thermodynamic Extremal Principle

    Svoboda, J., Fischer, F. D. & McDowell, D. L., 2012, In: Acta materialia. 60, p. 396-406

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment

    Lelito, J., Pawel L., Z., Shirzadi, A. A., Greer, A. L., Krajewski, W. K., Suchy, J. S., Faerber, K. & Schumacher, P., 2012, In: Acta materialia. 60, p. 2950-2958

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys

    Zhu, L.-F., Friák, M., Dick, A., Grabowski, B., Hickel, T., Liot, F., Holec, D., Schlieter, A., Kühn, U., Eckert, J., Ebrahimi, Z., Emmerich, H. & Neugebauer, J., 2012, In: Acta materialia. 60, p. 1594-1602

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Pöschmann, D., Zhang, Z. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 4496-4505

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Interdependent Effect of Chemical Composition and Thermal History on Artificial Aging of AA6061

    Pogatscher, S., Antrekowitsch, H. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 5545-5554

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Modelling for Hydrogen Diffusion in Metals with Traps Revisited

    Svoboda, J. & Fischer, F. D., 2012, In: Acta materialia. 60, p. 1211-1220

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Modelling the Kinetics of a Triple Junction

    Fischer, F. D., Svoboda, J. & Hackl, K., 2012, In: Acta materialia. 60, p. 4704-4711

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J. J., Voevodin, A. A., Resch, K. & Mayrhofer, P. H., 2012, In: Acta materialia. 60, p. 2091-2096

    Research output: Contribution to journal › Article › Research › peer-review

  152. 2011
  153. Published

    Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens

    Senger, J., Weygand, D., Motz, C., Gumbsch, P. & Kraft, O., 2011, In: Acta materialia. p. 2937-2947

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Diffusion Processes in a Migrating Interface – The Thick Interface Model

    Svoboda, J., Gamsjäger, E., Fischer, F. D., Liu, Y. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 4775-4786

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel

    Rathmayer, G. & Pippan, R., 2011, In: Acta materialia. p. 7228-7240

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Mechanisms controlling the artificial aging of Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Ebner, T. & Uggowitzer, P. J., 2011, In: Acta materialia. 59, p. 3352-3363

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Modelling of Excess Vacancy Annihilation at Different Types of Sinks

    Fischer, F. D., Svoboda, J., Appel, F. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 3463-3472

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Modelling of the Influence of Sources and Sinks for Vacancies and Stress State on Diffusion in Crystalline Solids

    Svoboda, J. & Fischer, F. D., 2011, In: Acta materialia. 59, p. 1212-1219

    Research output: Contribution to journal › Article › Research › peer-review

  162. Published

    Precipitation hardening of biodegradable Fe-Mn-Pd alloys

    Moszner, F., Sologubenko, A. S., Schinhammer, M., Lerchbacher, C., Hänzi, A. C., Leitner, H., Uggowitzer, P. J. & Löffler, J. F., 2011, In: Acta materialia. p. 981-991

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Source controlled yield and hardening of Cu(100) studied by in situ transmission electron microscopy

    Kiener, D. & Minor, A. M., 2011, In: Acta materialia. 59, p. 1328-1337

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Transient Solute Drag in Migrating Grain Boundaries

    Svoboda, J., Fischer, F. D. & Leindl, M., 2011, In: Acta materialia. 59, p. 6556-6562

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Work hardening in micropillar compression: In situ experiments and modeling

    Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840

    Research output: Contribution to journal › Article › Research › peer-review

  167. 2010
  168. Published

    Achieving the ideal strength in annealed Molybdenum nanopillars

    Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, In: Acta materialia. 58, p. 5160-5167

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In: Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Experimental and computational study on the effect of Yttrium on the phase stability of sputtered Cr-Al-Y-N hard coatings

    Rovere, F., Music, D., Schneider, J. M. & Mayrhofer, P. H., 2010, In: Acta materialia. 58, p. 2708-2715

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In: Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Modelling of Diffusional Phase Transformation in Multi-Component Systems with Stoichiometric Phases

    Svoboda, J., Fischer, F. D. & Abart, R., 2010, In: Acta materialia. 58, p. 2905-2911

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Stress Development During Reaction of Metallic Nanospheres with Gas

    Svoboda, J. & Fischer, F. D., 2010, In: Acta materialia. 59, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Substitutional Diffusion in Multicomponent Solids with Non-Ideal Sources and Sinks for Vacancies

    Fischer, F. D. & Svoboda, J., 2010, In: Acta materialia. 58, p. 2698-2707

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

    Pippan, R., Zhang, H. W., Huang, X. & Hansen, N., 2010, In: Acta materialia. p. 1698-1707

    Research output: Contribution to journal › Article › Research › peer-review

  180. 2009
  181. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity

    Motz, C., Weygand, D., Senger, J. & Gumbsch, P., 2009, In: Acta materialia. 57, p. 1744-1754

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique

    Massl, S., Thomma, W., Keckes, J. & Pippan, R., 2009, In: Acta materialia. 57, p. 1768-1776

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644

    Research output: Contribution to journal › Article › Research › peer-review

  187. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Modeling of Formation of Binary-Phase Hollow Nanospheres from Metallic Solid Nanospheres

    Svoboda, J., Fischer, F. D. & Vollath, D., 2009, In: Acta materialia. 57, p. 1912-1919

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Vacancy-Driven Stress Relaxation in Layers

    Svoboda, J. & Fischer, F. D., 2009, In: Acta materialia. 57, p. 4649-4657

    Research output: Contribution to journal › Article › Research › peer-review

  190. 2008
  191. Published

    Structure, elastic properties and phase stability of Cr1–xAlxN

    Mayrhofer, P. H., Music, D., Reeswinkel, T., Fuß, H.-G. & Schneider, J. M., 14 Mar 2008, In: Acta materialia. 56.2008, 11, p. 2469-2475 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    A further step towards an understanding of size-dependent crystal plasticity: In-situ tension experiments of miniaturized single crystal copper samples

    Kiener, D., Grosinger, W., Dehm, G. & Pippan, R., 2008, In: Acta materialia. 56, p. 580-592

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    A model for evolution of shape changing precipitates in multicomponent systems

    Svoboda, J., Fischer, F. D. & Mayrhofer, P. H., 2008, In: Acta materialia. 56, p. 4896-4904

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    From Distribution Functions to evolution equations for grain growth and coasening

    Fischer, F. D., Svoboda, J., Gamsjäger, E. & Oberaigner, E., 2008, In: Acta materialia. 56, p. 5395-5400

    Research output: Contribution to journal › Article › Research › peer-review

  195. Published

    Simulation of Chemically Driven Inelastic Strain in Multi-Component Systems with Non-Ideal Sources and Sinks for Vacancies

    Svoboda, J., Fischer, F. D. & Gamsjäger, E., 2008, In: Acta materialia. 56, p. 351-357

    Research output: Contribution to journal › Article › Research › peer-review

  196. 2007
  197. Published

    A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale

    Massl, S., Keckes, J. & Pippan, R., 2007, In: Acta materialia. 55, p. 4835-4844

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    A new approach to modelling of non-steady grain growth

    Svoboda, J. & Fischer, F. D., 2007, In: Acta materialia. 55, p. 4467-4474

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    A note on the contact conditions at migrating interfaces

    Gamsjäger, E., 2007, In: Acta materialia. 55, p. 4823-4833

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation

    Kreuzer, H. G. M. & Pippan, R., 2007, In: Acta materialia. 55, p. 3229-3235

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti1-XAlXN

    Mayrhofer, P. H., Fischer, F. D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 2007, In: Acta materialia. 55, p. 1441-1446

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    High Temperature Mechanical Behaviour of Flaw Tolerant Almunia-Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Sánchez-Herencia, A. J., Llanes, L. & Baudín, C., 2007, In: Acta materialia. 55, p. 4891-4901

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    In situ TEM straining of single crystal Au films on polyimide: Change of deformation mechanisms at the nanoscale

    Oh, S. H., Legros, M., Kiener, D., Gruber, P. A. & Dehm, G., 2007, In: Acta materialia. 55, p. 5558-5571

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Kinetics of Solute Driven Melting and Solidification

    Gamsjäger, E., Svoboda, J., Fischer, F. D. & Rettenmayr, M., 2007, In: Acta materialia. 55, p. 2599-2607

    Research output: Contribution to journal › Article › Research › peer-review

  205. Published

    Precipitation Twinning

    Appel, F., Fischer, F. D. & Clemens, H., 2007, In: Acta materialia. 55, p. 4915-4923

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Prediction of Fracture Toughness of a Ceramic Multilayer Composite - Modelling and Experiments

    Chen, C. R., Pascual-Herrero, J., Fischer, F. D., Kolednik, O. & Danzer, R., 2007, In: Acta materialia. 55, p. 409-421

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Size-independent stresses in Al thin films thermally strained down to -100°C

    Eiper, E., Keckes, J., Zizak, I., Cabie, M. & Dehm, G., 2007, In: Acta materialia. 55, p. 1941-1946

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Strain Compensation by Twinning in Au Thin Films: Experimental and Model

    Dehm, G., Oh, S. H., Gruber, P., Legros, M. & Fischer, F. D., 2007, In: Acta materialia. 55, p. 6659-6665

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    Texture transition in Cu thin films: Electron backscatter diffraction vs. X-ray diffraction

    Sonnweber-Ribic, P., Gruber, P., Dehm, G. & Arzt, E., 2007, In: Acta materialia. 55, p. 765-766

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels

    Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    Three-dimensional finite element simulation of a polycrystalline copper specimen

    Musienko, A., Tatschl, A., Kolednik, O., Pippan, R. & Cailletaud, G., 2007, In: Acta materialia. 55, p. 4121-4136

    Research output: Contribution to journal › Article › Research › peer-review

  212. 2006
  213. Published

    A combined experimantal and computational study of deformation in grains of biomedical grade 316LVM stainless steel

    You, X., Connolley, T., McHugh, P. E., Cuddy, H. & Motz, C., 2006, In: Acta materialia. 54, p. 4825-4840

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    A Thick-Interface Model for Diffusive and Massive Phase Transformation in Substitutional Alloys

    Svoboda, J., Vala, J., Gamsjäger, E. & Fischer, F. D., 2006, In: Acta materialia. 54, p. 3953-3960

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    Diffusion and Creep in Multi-Component Alloys with Non-Ideal Sources and Sinks for Vacancies

    Svoboda, J., Fischer, F. D. & Fratzl, P., 2006, In: Acta materialia. 54, p. 3043-3053

    Research output: Contribution to journal › Article › Research › peer-review

  216. Published

    Epitaxy and Bonding of Cu Films on Oxygen-Terminated a-Al2O3 (0001) Surfaces

    Oh, S. H., Scheu, C., Wagner, T., Tchernychova, E. & Rühle, M., 2006, In: Acta materialia. 54, p. 2685-2696

    Research output: Contribution to journal › Article › Research › peer-review

  217. Published

    Influence of Diffusional Stress Relaxation on Growth of Stoichiometric Precipitates in Binary Systems

    Svoboda, J., Gamsjäger, E. & Fischer, F. D., 2006, In: Acta materialia. 54, p. 4575-4581

    Research output: Contribution to journal › Article › Research › peer-review

  218. Published

    Microstructural evolution of the deformed volume beneath microindents in tungsten and copper

    Kiener, D., Pippan, R., Motz, C. & Kreuzer, E., 2006, In: Acta materialia. 54, p. 2801-2811

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Nanocomposite Ti-B-N coatings synthesized by reactive arc evaporation

    Neidhardt, J., Czigany, Z., Sartory, B., Tessadri, R., Sullivan, M. O. & Mitterer, C., 2006, In: Acta materialia. 54, p. 4193-4200

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Numeric Modelling of the Deformation Behaviour of Lamellar gamma-TiAl

    Svoboda, J., Fischer, F. D. & Fratzl, P., 2006, In: Acta materialia. 54, p. 3043-3053

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

    Sommitsch, C. & Mitter, W., 2006, In: Acta materialia. p. 357-375

    Research output: Contribution to journal › Article › Research › peer-review

  222. Published

    Recrystallisation and Phase Transitions in a g-TiAl Based Alloy as Observed by ex- and in-situ High-energy X-ray Diffraction

    Liss, K.-D., Bartels, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F.-P., Gerling, R., Scheu, C. & Schreyer, A., 2006, In: Acta materialia. 54, p. 3721-3735

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    The Role of Elastic Contrast on the Strain Energy and the Stress State of a Spheroidal Inclusion with a General Eigenstrain State

    Fischer, F. D., Böhm, H. J., Oberaigner, E. & Waitz, T., 2006, In: Acta materialia. 54, p. 151-156

    Research output: Contribution to journal › Article › Research › peer-review

  224. 2005
  225. Published

    Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness

    Sabirov, I., Kolednik, O., Valiev, R. Z. & Pippan, R., 2005, In: Acta materialia. 53, p. 4919-4930

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Intergranular Films at Metal-Ceramic Interfaces: Part I – Interface, Structure & Chemistry

    Avishai, A., Scheu, C. & Kaplan, W. D., 2005, In: Acta materialia. 53, p. 1559-1569

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique

    Motz, C., Schöberl, T. & Pippan, R., 2005, In: Acta materialia. 53, p. 4269-4279

    Research output: Contribution to journal › Article › Research › peer-review

  228. Published

    Structure of Cu deformed by high pressure torsion

    Hebesberger, T., Stüwe, H.-P., Vorhauer, A., Wetscher, F. & Pippan, R., 2005, In: Acta materialia. 53, p. 393-402

    Research output: Contribution to journal › Article › Research › peer-review

  229. 2004
  230. Published

    Application of the thermodynamic extremal principle to the diffusional phase transformation

    Svoboda, J., Gamsjäger, E., Fischer, F. D. & Fratzl, P., 2004, In: Acta materialia. 52, p. 959-967

    Research output: Contribution to journal › Article › Research › peer-review

  231. Published

    Asymmetric crack wake plasticity - a reason for roughness induced crack closure

    Pippan, R., Strobl, G., Kreuzer, H. & Motz, C., 2004, In: Acta materialia. 52, p. 4493-4502

    Research output: Contribution to journal › Article › Research › peer-review

  232. 2003
  233. Published

    Local microstructure and its influence on precipitation behavior in hot deformed Nimonic 80a

    Tian, B., Zickler, G., Lind, C. & Paris, O., 2003, In: Acta materialia. 51, p. 4149-4160

    Research output: Contribution to journal › Article › Research › peer-review

  234. 2002
  235. Published

    Influence of solute segregation and drag on properties of migrating interfaces

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2002, In: Acta materialia. 50, p. 967-977

    Research output: Contribution to journal › Article › Research › peer-review

  236. 2001
  237. Published

    Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature

    Ludwig, A., 2001, In: Acta materialia. p. 165-169

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    Kinetics of Interfaces during Diffusional Transformation

    Svoboda, J., Fischer, F. D., Fratzl, P., Gamsjäger, E. & Simha, N. K., 2001, In: Acta materialia. 49, p. 1249-1259

    Research output: Contribution to journal › Article › Research › peer-review

  239. 1996
  240. Published

    Direct Observation of Solidification Microstructures around Absolute Stability

    Ludwig, A. & Kurz, W., 1996, In: Acta materialia. p. 3643-3648

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations