Acta materialia, ‎1359-6454

Journal

ISSNs1359-6454
Additional searchable ISSN (electronic)1873-2453
1 - 100 out of 217Page size: 100

Publications / Theses

  1. 2022
  2. Published

    Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

    Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237, 118191.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments

    Kapp, M. W., Renk, O., Eckert, J. & Pippan, R., 15 Jun 2022, In: Acta Materialia. 232, 117935.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2021
  5. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 2021, 215, 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density

    Ketov, S. V., Ivanov, Y. P., Putz, B., Zhang, Z., Eckert, J. & Greer, A. L., 1 Aug 2021, In: Acta Materialia. 214, 116993.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Nayak, G. K., Renk, O., Holec, D., Mayrhofer, P. H. & Zhang, Z., 21 May 2021, In: Acta materialia. 214.2021, 1 August, 11 p., 117004.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Real-time atomic-resolution observation of coherent twin boundary migration in CrN

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Sheng, H., Gammer, C., Holec, D. & Zhang, Z., 11 Feb 2021, In: Acta materialia. 208.2021, 15 April, 13 p., 116732.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys

    LI, J., Hage, F. S., Ramasse, Q. M. & Schumacher, P., 15 Jan 2021, In: Acta materialia. 206.2021, March, 9 p., 116652.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation

    Holzapfel, D. M., Music, D., Hans, M., Wolff-Goodrich, S., Holec, D., Bogdanovski, D., Arndt, M., Eriksson, A. O., Yalamanchili, K., Primetzhofer, D., Liebscher, C. & Schneider, J. M., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices

    Buchinger, J., Wagner, A., Chen, Z., Zhang, Z., Holec, D., Mayrhofer, P. H. & Bartosik, M., 2021, In: Acta materialia. 2021, 202, p. 376-386

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance

    Koutná, N., Brenner, A., Holec, D. & Mayrhofer, P. H., 2021, In: Acta materialia. 2021, 206, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, p. 1-11 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 2021, In: Acta materialia. 2021, 218, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Theoretical investigation of the 70.5° mixed dislocations in body-centered cubic transition metals

    Romaner, L., Pradhan, T., Kholtobina, A., Drautz, R. & Mrovec, M., 2021, In: Acta materialia. p. 117154 1-10 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 31 Dec 2020, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Initiation of fatigue damage in ultrafine grained metal films

    Glushko, O. & Kiener, D., 27 Dec 2020, In: Acta Materialia. 206.2021, March, 10 p., 116599.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 20 Nov 2020, (E-pub ahead of print) In: Acta materialia. 204.2021, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 15 Sept 2020, In: Acta materialia. 2020, 197, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    The role of crystallographic texture on mechanically induced grain boundary migration

    Renk, O., Ghosh, P., Sabat, R. K., Eckert, J. & Pippan, R., 9 Sept 2020, (E-pub ahead of print) In: Acta Materialia. 200.2020, November, p. 404-416 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Age-hardening response of AlMgZn alloys with Cu and Ag additions

    Stemper, L., Tunes, M. A., Oberhauser, P., Uggowitzer, P. J. & Pogatscher, S., 15 Aug 2020, In: Acta Materialia. 195.2020, August, p. 541–554 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

    Coleman, K., Bermejo, R., Leguillon, D. & Trolier-McKinstry, S., Jun 2020, In: Acta Materialia. 191, p. 245-252

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction

    Todt, J., Krywka, C., Zhang, Z. L., Mayrhofer, P. H., Keckes, J. & Bartosik, M., 29 May 2020, In: Acta Materialia. 195.2020, 15 August, p. 425-432 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy

    Alfreider, M., Issa, I., Renk, O. & Kiener, D., 15 Feb 2020, In: Acta Materialia. 185.2020, 15 February, p. 309-319 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

    Klünsner, T., Lube, T., Gettinger, C., Walch, L. & Pippan, R., 12 Feb 2020, In: Acta materialia. 188, p. 30-39

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Chemical bonding effects on the brittle-to-ductile transition in metallic glasses

    Moitzi, F., Şopu, D., Holec, D., Perera, D., Mousseau, N. & Eckert, J., 10 Feb 2020, In: Acta Materialia. 188.2020, 15 April, p. 273-281 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, (E-pub ahead of print) In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams

    Sorensen, D., Hintsala, E., Stevick, J., Pischlar, J., Li, B., Kiener, D., Myers, J. C., Jin, H., Liu, J., Stauffer, D., Ramirez, A. J. & Ritchie, R. O., 15 Jan 2020, In: Acta Materialia. 183.2020, 15 January, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution

    Zhao, M., Issa, I., Pfeifenberger, M. J., Wurmshuber, M. & Kiener, D., 1 Jan 2020, In: Acta Materialia. 182.2020, 1 January, p. 215-225 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mapping the mechanical properties in nitride coatings at the nanometer scale

    Zhang, Z., Chen, Z., Holec, D., Liebscher, C., Koutná, N., Bartosik, M., Zheng, Y. H., Dehm, G. & Mayrhofer, P. H., 2020, In: Acta materialia. 2020, 194, p. 343-353

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2019
  34. Published

    Assessment of ductile character in superhard Ta-C-N thin films

    Glechner, T., Hahn, R., Wojcik, T., Holec, D., Kolozsvari, S., Zaid, H., Kodambaka, S., Mayrhofer, P. H. & Riedl, H., 15 Oct 2019, In: Acta materialia. 179, p. 17-25 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers

    Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pippan, R. & Sun, J., 7 Sept 2019, In: Acta Materialia. 180.2019, November, p. 73-83 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials

    Pfeifenberger, M. J., Nikolić, V., Žák, S., Hohenwarter, A. & Pippan, R., 1 Sept 2019, In: Acta Materialia. 176, p. 330-340 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Thermodynamics of an austenitic stainless steel (AISI-348) under in situ TEM heavy ion irradiation

    Tunes, M. A., Greaves, G., Kremmer, T., Vishnyakov, V. M., Edmondson, P. D., Donnelly, S. E., Pogatscher, S. & Schön, C. G., 27 Aug 2019, In: Acta Materialia. 179, p. 360-371 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Transmission Electron Microscopy study of the neutron-irradiation response of Ti-based MAX phases at high temperatures

    Tunes, M. A., Harrison, R. W., Donnelly, S. E. & Edmondson, P. D., 8 Mar 2019, In: Acta Materialia. 169.2019, May, p. 237-247 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Rate limiting deformation mechanisms of bcc metals in confined volumes

    Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 2019, 165, p. 409-419 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN / AlN multilayers

    Chen, Z., Holec, D., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 2019, In: Acta materialia. 168.2019, 15 April, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F.-D. & Svoboda, J., 2019, In: Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    On Solute Depletion Zones Along Grain Boundaries During Segregation

    Scheiber, D., Svoboda, J., Fischer, F.-D. & Romaner, L., 2019, In: Acta materialia. 182, p. 100-107

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2018
  49. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

    Wang, Z., Prashanth, K. G., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2, p. 157-166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

    Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Metallic glass nanolaminates with shape memory alloys

    Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, (E-pub ahead of print) In: Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition

    Kormout, K. S., Ghosh, P., Bachmaier, A., Hohenwarter, A. & Pippan, R., 8 May 2018, In: Acta Materialia. 154.2018, 1 August, p. 33-44 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

    Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P. & Hohenwarter, A., 1 Jan 2018, In: Acta materialia. 142, p. 201-212 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018, In: Acta materialia. p. 193-205

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2017
  60. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure

    Liu, J., Li, J., Hage, F., Ghosh, P., Li, J., Wang, W., Chen, Z., Wang, T., Tang, W., Ramasse, Q. & Schumacher, P., 6 Apr 2017, In: Acta materialia. 131.2017, June, p. 169-186 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

    Kosiba, K., Scudino, S., Kobold, R., Kühn, U., Greer, A. L., Eckert, J. & Pauly, S., Apr 2017, In: Acta Materialia. 127, p. 416-425

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Prashanth, K. G., Scudino, S. & Eckert, J., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 25-35 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Fatigue crack growth anisotropy in ultrafine-grained iron

    Leitner, T., Hohenwarter, A., Ochensberger, W. & Pippan, R., 1 Mar 2017, In: Acta materialia. 126, p. 154-165 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    In-situ observation of coupled peritectic growth in a binary organic model alloy

    Ludwig, A., Mogeritsch, J. P. & Pfeifer, T., 1 Mar 2017, In: Acta Materialia. 126, p. 329-335 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F. D. & Svoboda, J., 2017, In: Acta materialia. 129, p. 331-342

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Electric-field-induced structural changes in multilayer piezoelectric actuators during electrical and mechanical loading

    Esteves, G., Fancher, C. M., Röhrig, S., Maier, G. A., Jones, J. L. & Deluca, M., 2017, In: Acta materialia. 132, p. 96-105 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M., Mitterer, C. & Keckes, J., 2017, In: Acta materialia. 122, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

    Merle, B., Maier-Kiener, V. & Pharr, G. M., 2017, In: Acta materialia. 134, p. 167-176

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., No, M. L., Juan, J. S., Clemens, H. & Mayer, S., 2017, In: Acta materialia. 127, p. 440-450

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 2017, In: Acta materialia. 131, p. 391-399

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences

    Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F. D. & Dehm, G., 2017, In: Acta materialia. 124, p. 195-203

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Systematic ab initio investigation of the elastic modulus in quaternary transition metal nitride alloys and their coherent multilayers

    Wang, F., Holec, D., Odén, M., Mücklich, F., Abrikosov, I. A. & Tasnádi, F., 2017, In: Acta materialia. 127, p. 124-132 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    The contribution of 180° domain wall motion to dielectric properties quantified from in situ X-ray diffraction

    Fancher, C. M., Brewer, S., Chung, C. C., Röhrig, S., Rojac, T., Esteves, G., Deluca, M., Bassiri-Gharb, N. & Jones, J. L., 2017, In: Acta materialia. 126, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    The enhanced theta-prime (q0) precipitation in an Al-Cu alloy with trace Au additions

    Chen, Y., Zhang, Z., Chen, Z., Tsalanidis, A., Weyland, M., Findlay, S., J. Allen, L., Li, J., V. Medhekar, N. & Bourgeois, L., 2017, In: Acta materialia. 125, p. 340-350 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2016
  78. Published

    Interface dominated mechanical, properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., Dec 2016, In: Acta materialia. 121, p. 104-116

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Prillhofer, R., Ebner, T., Curtin, W. A., Uggowitzer, P. J. & Pogatscher, S., 1 Oct 2016, In: Acta materialia. 118, p. 296-305 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys

    Wang, X. H., Inoue, A., Kong, F. L., Zhu, S. L., Stoica, M., Kaban, I., Chang, C. T., Shalaan, E., Al-Marzouki, F. & Eckert, J., 1 Sept 2016, In: Acta materialia. 116, p. 370-381 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

    Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O. & Ramamurty, U., 15 Aug 2016, In: Acta materialia. 115, p. 285-294 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Mapping of residual strains around a shear band in bulk metallic glass by nanobeam X-ray diffraction

    Shakur Shahabi, H., Scudino, S., Kaban, I., Stoica, M., Escher, B., Menzel, S., Bm Vaughan, G., Kühn, U. & Eckert, J., 1 Jun 2016, In: Acta materialia. 111, p. 187-193 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 15 May 2016, In: Acta materialia. 110, p. 283-294 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M. W., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 1 Mar 2016, In: Acta materialia. 106, p. 239-248 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Manipulation of free volumes in a metallic glass through Xe-ion irradiation

    Bian, X. L., Wang, G., Chen, H. C., Yan, L., Wang, J. G., Wang, Q., Hu, P. F., Ren, J. L., Chan, K. C., Zheng, N., Teresiak, A., Gao, Y. L., Zhai, Q. J., Eckert, J., Beadsworth, J., Dahmen, K. A. & Liaw, P. K., 1 Mar 2016, In: Acta materialia. 106, p. 66-77 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Structure-property relationships in nanoporous metallic glasses

    Şopu, D., Soyarslan, C., Sarac, B., Bargmann, S., Stoica, M. & Eckert, J., 1 Mar 2016, In: Acta materialia. 106, p. 199-207 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In: Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys

    Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G. & Schumacher, P., 2016, In: Acta materialia. 111, p. 85-95 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Grain refinement of hypoeutectic Al-Si alloys with B

    Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X. & Wang, T., 2016, In: Acta materialia. 120, p. 168 178 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy

    Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F. & Schumacher, P., 2016, In: Acta materialia. 108, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Strain-induced phase transformation of a thin Co film on flexible substrates

    Marx, V. M., Kirchlechner, C., Breitbach, B., Cordill, M., Többens, D. M., Waitz, T. & Dehm, G., 2016, In: Acta materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The bulk and interfacial structures of the η (Al2Au) precipitate phase

    Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. 2015
  102. Published

    Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

    Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 22 Aug 2015, In: Acta materialia. 98, p. 423-432 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses

    Thurnheer, P., Maaß, R., Laws, K. J., Pogatscher, S. & Löffler, J. F., 29 Jul 2015, In: Acta materialia. 96, p. 428-436 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Modification of eutectic Si in Al-Si alloys with Eu addition

    Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z. & Schumacher, P., 1 Feb 2015, In: Acta materialia. 84, p. 153-163 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Acta materialia. 94, p. 205-213

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P. H., 2015, In: Acta Materialia.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P., 2015, In: Acta materialia. 83, p. 276-284

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations