Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

Jin, S. & Harmuth, H., Juli 2021, in: Engineering Fracture Mechanics. 252.2021, July, 12 S., 107819.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of microstructural properties on the crack threshold of aluminium castings

Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan. 2021, in: Engineering Fracture Mechanics. 241, 10 S., 107431.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dez. 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Engineering Fracture Mechanics. 224.2020, March, 16 S., 106776.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the behaviour of non-propagating cracks in steel and aluminium castings

Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept. 2019, in: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Understanding the tensile strength of ceramics in the presence of small critical flaws

Martin, E., Leguillon, D., Sevecek, O. & Bermejo, R., 1 Okt. 2018, in: Engineering Fracture Mechanics. 201, S. 167-175 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry

Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 27 Juni 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Engineering Fracture Mechanics. 203.2018, November, S. 18-31 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Juni 2018, in: Engineering Fracture Mechanics. 203.2018, November, S. 2-17 16 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept. 2017, in: Engineering Fracture Mechanics. 182, S. 438-448 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

Berer, M., Mitev, I. & Pinter, G., 15 Apr. 2017, in: Engineering Fracture Mechanics. 175, S. 1-14 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Lifetime Prediction of Ceramic Components - A Case Study on Hybrid Rolling Contact

Khader, I., Rasche, S., Lube, T., Raga, R., Degenhardt, U. & Kailer, A., 2017, in: Engineering Fracture Mechanics. 169, S. 292-308 17 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of effective mode II fatigue crack growth threshold for metallic materials

Vojtek, T., Pippan, R., Hohenwarter, A. & Pokluda, J., 16 Sept. 2016, in: Engineering Fracture Mechanics. 174.2017, 1 April, S. 117-126 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

Krácalik, M., Daves, W. & Antretter, T., 2016, in: Engineering Fracture Mechanics. 152, 2, S. 10-25

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modelling of edge crack formation and propagation in ceramic laminates using the stress-energy coupled criterion

Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2016, in: Engineering Fracture Mechanics. 167, S. 45–55

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

Jin, S., Gruber, D. & Harmuth, H., 2014, in: Engineering Fracture Mechanics. 116, S. 228-236

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins

Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 2014, in: Engineering Fracture Mechanics. 116, S. 92-107

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests

Redhead, A., Frank, A. & Pinter, G., 2013, in: Engineering Fracture Mechanics. 101, S. 2-9

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of the crack bifurcation in layered ceramics with high residual stresses

Sevecek, O., Bermejo Moratinos, R. & Kotoul, M., 2013, in: Engineering Fracture Mechanics. 108, S. 120-138

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, in: Engineering Fracture Mechanics. 100, S. 108-121

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of residual stress on polymer pipe lifetime

Hutar, P., Sevcik, M., Andreas, F., Nahlik, L., Kucera, J. & Pinter, G., 2013, in: Engineering Fracture Mechanics. 108, S. 98-108

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite

Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2013, in: Engineering Fracture Mechanics. 108, S. 285-293

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A numerical methodology for lifetime estimation of HDPE pressure pipes

Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011, in: Engineering Fracture Mechanics. 78, S. 3049-3058

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Computational and experimental investigation of delamination in L-shaped laminated composite components

Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2010, in: Engineering Fracture Mechanics. S. 2810-2820

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cracks in Inhomogeneous Materials: Comprehensive Assessment Using the Configurational Forces Concepts

Kolednik, O., Predan, J. & Fischer, F. D., 2010, in: Engineering Fracture Mechanics. 77, S. 2698-2711

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

Bermejo Moratinos, R. & Danzer, R., 2010, in: Engineering Fracture Mechanics. 77, S. 2126-2135

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, in: Engineering Fracture Mechanics. 77, S. 2567-2576

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of crack propagation in layered ceramics with strong interfaces

Nahlik, L., Lucie, S., Hutar, P. & Bermejo Moratinos, R., 2010, in: Engineering Fracture Mechanics. 77, S. 2192-2199

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, in: Engineering Fracture Mechanics. 76, S. 2780-2787

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Computational and experimental simulation of delamination in L-shaped laminated composite components

Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, in: Engineering Fracture Mechanics. 76, S. 2810-2820

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

Brunner, A. J., Murphy, N. & Pinter, G., 2009, in: Engineering Fracture Mechanics. 76, S. 2678-2689

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Uniaxial and biaxial fracture behaviour of refractory materials

Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, in: Engineering Fracture Mechanics. 76, S. 2249-2259

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

Trattnig, G., Antretter, T. & Pippan, R., 2008, in: Engineering Fracture Mechanics. 75, S. 223-235

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC-Co cemented carbides

Torres, Y., Bermejo Moratinos, R., Llanes, L. & Anglada, M., 2008, in: Engineering Fracture Mechanics. 75, S. 4422-4430

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A micromechnics-based model for micro-toughness estimation from dimple geometry measurements

Srinivasan, K., Kolednik, O. & Siegmund, T., 2007, in: Engineering Fracture Mechanics. 74, S. 1323-1343

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of single overloads in ductile metals: A reconsideration

Bichler, C. & Pippan, R., 2007, in: Engineering Fracture Mechanics. 74, S. 1344-1359

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, in: Engineering Fracture Mechanics. 74, S. 2919-2932

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the local variation of the crack driving force in a double mismatched weld

Predan, J., Gubeljak, N. & Kolednik, O., 2007, in: Engineering Fracture Mechanics. 74, S. 1739-1757

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Three-Dimensional Modeling of Ductile Crack Growth: Cohesive Zone Parameters and Crack Tip Triaxiality

Chen, C. R., Kolednik, O., Heerens, J. & Fischer, F. D., 2005, in: Engineering Fracture Mechanics. 72, S. 2072-2094

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A Threshold Stress Intensity Factor at the Onset of Stable Extension of Knoop Indentation Cracks

Lube, T. & Fett, T., 2004, in: Engineering Fracture Mechanics. S. 2263-2269

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)