Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating

Todt, J., Zalesak, J., Krywka, C. & Keckes, J., 11 Juli 2021, in: Advanced Engineering Materials.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Additive Manufacturing of Aluminum-Based Metal Matrix Composites—A Review

Tang, S., Ummethala, R., Suryanarayana, C., Eckert, J., Prashanth, K. G. & Wang, Z., Juli 2021, in: Advanced Engineering Materials. 23, 7, 2100053.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

In situ investigation of the rapid solidification behavior of intermetallic γ-TiAl-based alloys using high-energy X-ray diffraction

Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 2021, in: Advanced Engineering Materials. 2021, S. 1-7

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dez. 2020, in: Advanced Engineering Materials. 2021, S. 1-12 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Defects in a laser powder bed fused tool steel

Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B. & Schnitzer, R., 13 Okt. 2020, (Elektronische Veröffentlichung vor Drucklegung.) in: Advanced Engineering Materials. 2020, 2000833, 11 S., 2000833 .

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrosion in Hank's Solution and Mechanical Strength of Ultrafine-Grained Pure Iron

Batista, B. A., Soares, R. B., Lins, V. D. F. C., Figueiredo, R. B., Hohenwarter, A. & Matencio, T., 1 Jan. 2020, in: Advanced Engineering Materials.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and Failure Characteristics of Nanostructured Molybdenum–Copper Composites

Schwarz, K. T., Rosalie, J. M., Wurster, S., Pippan, R. & Hohenwarter, A., 1 Jan. 2020, in: Advanced Engineering Materials. 22.2020, 1, 10 S., 1900474.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 2020, in: Advanced Engineering Materials. 2020, S. 1-32

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

Wartbichler, R., Clemens, H. & Mayer, S., 1 Dez. 2019, in: Advanced Engineering Materials. 21, 12, 1900800.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Clustering in Age-Hardenable Aluminum Alloys

Dumitraschkewitz, P., Gerstl, S. S. A., Stephenson, L. T., Uggowitzer, P. J. & Pogatscher, S., 1 Okt. 2018, in: Advanced Engineering Materials. 20, 10, 1800255.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Characterization of Surface and Structure of In Situ Doped Sol-Gel-Derived Silicon Carbide

Kettner, O., Šimić, S., Kunert, B., Schennach, R., Resel, R., Grießer, T. & Friedel, B., 1 Juni 2018, in: Advanced Engineering Materials. 20, 6, 1701067.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Advanced Engineering Materials. 19.2017, 4, 27 S., 1600735.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

Petersmann, M., 31 Jan. 2017, in: Advanced Engineering Materials. 19, 4, 6 S., 1600684.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing

Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., Li, J. & Hohenwarter, A., 3 Jan. 2017, in: Advanced Engineering Materials. 19, 4, 10 S., 1600674.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Atomistic modelling-based design of novel materials

Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, P. H., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 2017, in: Advanced Engineering Materials. 19, 4, 19 S., 1600688.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

Leitner, A., Maier-Kiener, V. & Kiener, D., 2017, in: Advanced Engineering Materials. 19, 4, 9 S., 1600669.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of heat treatment on microstructure stability and mechanical properties of a carbide-free bainitic steel

Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 2017, in: Advanced Engineering Materials. 19, 4, 5 S., 1600658.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors

Raidl, N., Hofstätter, M. & Supancic, P. H., 2017, in: Advanced Engineering Materials. 19, 4

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitation of long-period stacking ordered structure in Mg-Gd-Zn-Mn alloy

Li, J., Albu, M., Wu, Y. J., Peng, L. M., Dienstleder, M., Kothleitner, G., Hofer, F. & Schumacher, P., 2017, in: Advanced Engineering Materials. 19, 1600705

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thin Film Adhesion of Flexible Electronics Influenced by Interlayers

Kleinbichler, A., Bartosik, M., Völker, B. & Cordill, M. J., 2017, in: Advanced Engineering Materials. 19.2017, 4, 7 S., 1600665.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dez. 2016, in: Advanced Engineering Materials. 19, 4, 15 S., 1600683.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cranial Polypropylene Implants by Fused Filament Fabrication

Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dez. 2016, in: Advanced Engineering Materials. Online ISSN: 1527-2648, S. n-a

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thiol-Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

Sahin, M., Ayalur-Karunakaran, S., Manhart, J., Wolfahrt, M., Kern, W. & Schlögl, S., 23 Nov. 2016, (Elektronische Veröffentlichung vor Drucklegung.) in: Advanced Engineering Materials. 19.2017, 4, 10 S., 1600620.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb. 2016, in: Advanced Engineering Materials. 18, 2, S. 224-230 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Atom Probe Tomography Study of As-Quenched Al–Mg–Si Alloys 

Dumitraschkewitz, P., Gerstl, S. S. A., Uggowitzer, P. J., Löffler, J. F. & Pogatscher, S., 2016, in: Advanced Engineering Materials. S. n/a-n/a

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, in: Advanced Engineering Materials. 2016, 19, 19.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy

Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, in: Advanced Engineering Materials. 17, 6, S. 786-790

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, in: Advanced Engineering Materials. 16, S. 445-451

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, in: Advanced Engineering Materials. 15, S. 1125-1128

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys

Clemens, H. & Mayer, S., 2013, in: Advanced Engineering Materials. 15, S. 191-215

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel

Renk, O., Hohenwarter, A. & Pippan, R., 2012, in: Advanced Engineering Materials. 11, S. 948-954

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, in: Advanced Engineering Materials. 14, S. 299-303

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy

Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, in: Advanced Engineering Materials. 14, S. 445-448

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strength, Hardening, and Failure Observed by In Situ TEM Tensile Testing

Kiener, D., Kaufmann, P. & Minor, A. M., 2012, in: Advanced Engineering Materials. 14, S. 960-967

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, in: Advanced Engineering Materials. S. 664-673

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti-44 at% Al-(3-7) at% Mo alloys.

Schmölzer, T., Mayer, S., Sailer, C., Haupt, F., Güther, V., Staron, P., Liss, K.-D. & Clemens, H., 2011, in: Advanced Engineering Materials. 13, S. 306-311

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ Experiments with Synchrotron High-Energy X-Rays and Neutrons

Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2011, in: Advanced Engineering Materials. S. 658-663

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings

Bartosik, M., Pitonak, R. & Keckes, J., 2011, in: Advanced Engineering Materials. S. 705-711

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ µLaue: Instrumental setup for the deformation of micron sized samples

Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, in: Advanced Engineering Materials. 13, S. 837-844

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mapping local structure and composition in biological materials by means of microbeam X-ray diffraction

Paris, O., Aichmayer, B., Al-Sawalmih, A., Li, C., Siegel, S. & Fratzl, P., 2011, in: Advanced Engineering Materials. 13, S. 784-792

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion

Khorashadizadeh, A., Raabe, D., Winning, M.-F. & Pippan, R., 2011, in: Advanced Engineering Materials. S. 245-250

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, in: Advanced Engineering Materials. S. 685-699

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature

Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, in: Advanced Engineering Materials.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bulk Nanostructured Functional Materials By Severe Plastic Deformation

Pippan, R., Zehetbauer, M., Grössinger, R., Krenn, H., Krystian, M., Rogl, P., Waitz, T. & Würschum, R., 2010, in: Advanced Engineering Materials. S. 692-700

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micrometer-Sized Specimen Preparation Based on Ion Slicing Technique

Pippan, R., Wurster, S., Motz, C. & Jenko, M., 2010, in: Advanced Engineering Materials. S. 61-63

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Precipitation Behavior of Superalloy ATI Allvac 718Plus

Zickler, G., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M. & Leitner, H., 2010, in: Advanced Engineering Materials. S. 176-183

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In Situ Characterization of a Nb and Mo Containing y-TiAl Based Alloy Using Neutron Diffraction and High-Temperature Microscopy

Watson, B. I. J., Liss, K.-D., Clemens, H., Wallgram, W., Schmölzer, T., Hansen, T. C. & Reid, M., 2009, in: Advanced Engineering Materials. 11, S. 932-937

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and Texture Formation During Near Conventional Forging of an Intermetallic Ti-45Al-5Nb Alloy

Stark, A., Bartels, A., Clemens, H., Kremmer, S., Schimansky, F.-P. & Gerling, R., 2009, in: Advanced Engineering Materials. 11, S. 976-981

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of Phospholipid Bilayers on Ti-6Al-4V and Ti-6Al-7Nb

Pressl, D., Teichert, C., Hlawacek, G., Clemens, H., Iliev, P. P., Schuster, A., Feyerabend, F. & Willumeit, R., 2008, in: Advanced Engineering Materials. 10, S. B47-B52

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Design of Novel ß-solidifying TiAl Alloys with Adjustable ß/B2-phase Fraction and Excellent Hot-Workability

Clemens, H., Wallgram, W., Kremmer, S., Güther, V., Otto, A. & Bartels, A., 2008, in: Advanced Engineering Materials. 10, S. 707-713

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Directional Atomic Rearrangements during Transformations between the apha- and gamma-phases in TiAl”

Liss, K.-D., Stark, A., BARTELS, A., Clemens, H., Buslaps, T., Phelan, D. & Yeoh, L., 2008, in: Advanced Engineering Materials. 10, S. 389-392

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture of Ceramics

Danzer, R., Lube, T., Supancic, P. & Damani, R. J., 2008, in: Advanced Engineering Materials. 10, S. 275-298

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the Formation of Ordered w-phase in High Nb Containing γ-TiAl Based Alloys”

Stark, A., BARTELS, A., Clemens, H. & Schimansky, F.-P., 2008, in: Advanced Engineering Materials. 10, S. 929-934

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

iffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry

Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Kocak, M. & Schreyer, A., 2007, in: Advanced Engineering Materials. 9, S. 627-638

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An Experimental and Theoretical Study on the Precipitation Behaviour of a Complex Steel

Leitner, H., Bischof, M., Clemens, H., Erlach, S. D., Sonderegger, B., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, in: Advanced Engineering Materials. 8, S. 1066-1077

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Atomistic Modelling of Optical Properties of Thin Films

Puschnig, P. & Ambrosch-Draxl, C., 2006, in: Advanced Engineering Materials. 8, S. 1151-1155

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of Residual Stresses in Compressor Discs for Aeroengines

Cihak, U., Staron, P., Stockinger, M. & Clemens, H., 2006, in: Advanced Engineering Materials. 8, S. 1088-1092

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of Mechanical Properties of Copper at the Micron Scale

Kiener, D., Motz, C., Schöberl, T., Jenko, M. & Dehm, G., 2006, in: Advanced Engineering Materials. 8, S. 1119-1125

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

Balika, W., Pinter, G. & Lang, R., 2006, in: Advanced Engineering Materials. S. 1146-1150

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Functional Properties of Wires and Thin Ribbons of Several Shape Memory Alloys

Kneißl, A., Unterweger, E. & Lojen, G., 2006, in: Advanced Engineering Materials. 8, S. 1113-1118

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High-Temperature Tribological Behavior of Cr'N-Ag Self-lubricating Coatings

Kutschej, K., Mitterer, C., Mulligan, C. P. & Gall, D., 2006, in: Advanced Engineering Materials. 8, S. 1125-1129

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films

Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, in: Advanced Engineering Materials. 8, S. 1140-1145

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ X-ray Diffraction as a tool to probe mechanical phenomena down to the nano-scale

Keckes, J., Eiper, E., Martinschitz, K. J., Boesecke, P., Gindl, W. & Dehm, G., 2006, in: Advanced Engineering Materials. S. 1084-1088

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Materials Research at the Materials Center Leoben

Ebner, R., 2006, in: Advanced Engineering Materials. 8, S. 1171-1177

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical Size-effects in Miniaturized and Bulk Materials

Dehm, G., Motz, C., Scheu, C., Clemens, H., Mayrhofer, P. H. & Mitterer, C., 2006, in: Advanced Engineering Materials. 8, S. 1033-1045

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Metallurgical Aspects of Casting High-Manganese Steel Grades

Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, in: Advanced Engineering Materials. 8, S. 1096-1100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, in: Advanced Engineering Materials. 8, S. 1092-1096

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and Texture Formation during Hot Rolling of Nb-Rich Gamma TiAl Alloys with Different C Contents

Stark, A., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, in: Advanced Engineering Materials. S. 1101-1108

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microwave Studies of Photonic Crystals

Kuchar, F., Meisels, R., Oberhumer, P. & Gajic, R., 2006, in: Advanced Engineering Materials. 8, S. 1156-1161

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numeric Modeling of the Deformation Behaviour of g-TiAl Based Alloys with Lamellar Microstructures

Schaden, T., Fischer, F. D., Clemens, H., Appel, F. & Bartels, A., 2006, in: Advanced Engineering Materials. 8, S. 1109-1113

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Oxide Fibre Composites with Promising Properties for High-Temperature Applications

Simon, R. & Danzer, R., 2006, in: Advanced Engineering Materials. 8, S. 1145-1150

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Self-organization of Nanostructures in Inorganic and Organic Semiconductor Systems

Teichert, C., Hofer, C. & Hlawacek, G., 2006, in: Advanced Engineering Materials. 8, S. 1057-1065

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The characterization of local deformation and fracture properties - a tool for advanced materials design

Kolednik, O., 2006, in: Advanced Engineering Materials. 8, S. 1079-1083

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The limits of refinement by severe plastic deformation

Pippan, R., Wetscher, F., Hafok, M., Vorhauer, A. & Sabirov, I., 2006, in: Advanced Engineering Materials. 8, S. 1046-1056

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermodyamic Modeling of High-Temperature Fe-Ni-Heazlewoodite

Waldner, P. & Sitte, W., 2006, in: Advanced Engineering Materials. 8, S. 1161-1164

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermography and Simulation of Advanced Nonlinear Electroceramic Components

Platzer, A., Supancic, P. & Danzer, R., 2006, in: Advanced Engineering Materials. 8, S. 1150-1155

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wet or dry - Hardness, stiffness and wear resistance of biological materials on the micron scale

Schöberl, T. & Jäger, I., 2006, in: Advanced Engineering Materials. S. 1164-1169

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

1st Autumn School "Engineering Materials Science with Neutrons and Synchrotron Radiation"

Schreyer, A., Reimers, W., Wroblewski, T., Haibel, A., Pyzalla, A. & Clemens, H., 2005, in: Advanced Engineering Materials. 7, S. 980-981

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Experimental Studies of Phase Transformations in a Carbon Containing Ti-45Al-7.5Nb Alloy and Related Thermodynamic Simulations

Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R. & Marketz, W. T., 2005, in: Advanced Engineering Materials. 7, S. 1131-1134

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the Impact of Macroscopic Phase Separation on Solidification Microstructures

Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, in: Advanced Engineering Materials. 7-9, S. 846-851

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Self-organized Nanostructures in Hard Ceramic Coatings

Mayrhofer, P., Mitterer, C. & Clemens, H., 2005, in: Advanced Engineering Materials. 7, S. 1071-1082

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Grain refinement of aluminium alloys by inoculation

Greer, A. L., Cooper, P. S., Meredith, M. W., Schneider, W., Schumacher, P., Spittle, J. A. & Tronche, A., 1 Jan. 2003, in: Advanced Engineering Materials. 5, 1-2, S. 81-91 11 S.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Cooperation within MEBSP on the Subject of Air Gap Formation during a Casting Process

Kron, J., Bellet, M., Ludwig, A., Wendt, J., Pustal, B. & Fredrikson, H., 2003, in: Advanced Engineering Materials. 5, S. 78-79

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification

Wu, M. & Ludwig, A., 2003, in: Advanced Engineering Materials. 5, S. 62-66

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure Control by Solidification Processing – Outcome from a European Thematic Network

Lacaze, J., Greer, L., Howe, A., Ludwig, A. & Fredrikson, H., 2003, in: Advanced Engineering Materials. 5, S. 11-16

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

How to Find Thermophysical Material Property Data for Casting Simulations?

Ludwig, A., 2001, in: Advanced Engineering Materials. S. 11-15

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)