Thomas Lucyshyn

1 - 106 out of 106Page size: 500

Publications / Theses

  1. 2023
  2. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., Oct 2023, In: Polymers. 15, 20, 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2022
  4. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 2022, In: Polymer Crystallization. 2022, 2387752.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2021
  6. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2019
  8. Published

    Physical foaming and crosslinking of polyethylene with modified talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 1 Sept 2019, In: Polymers. 11, 9, 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  10. Published

    Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Jul 2019, In: Journal of Applied Polymer Science. 137.2020, 2, 10 p., 48269.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, p. 1 - 5 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    High-Density Polyethylene as Phase-Change Material: Long-Term Stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 2019.

    Research output: Contribution to conference › Poster › Research

  15. 2018
  16. Published

    Optimization of fiber prediction model coefficients in injection molding simulation based on micro computed tomography

    Morak, M., Tscharnuter, D., Lucyshyn, T., Hahn, W., Göttlinger, M., Kummer, M., Steinberger, R. & Gross, T., 5 Dec 2018, In: Polymer engineering and science. 59.2019, s2, p. E152-E160 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2017
  19. Published

    Neues Werkzeug für die Messung der Entformungskräfte

    Lucyshyn, T. & Holzer, C., 1 Nov 2017, In: GAK (Gummi Fasern Kunststoffe). 11/2017, Jahrgang 70, p. 704-708 5 p.

    Research output: Contribution to journal › Article › Research

  20. Published

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., Aug 2017, In: International polymer processing. 32, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 16 Feb 2017, In: Journal of Physics: Conference Series. 790, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  22. Published

    Influence of Compounding Technology on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 2017, In: AIP Conference Proceedings. 1914

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Spezielle Aspekte der Spritzgießsimulation

    Lucyshyn, T., Messiha, M. & Holzer, C., 2017, Schriftenreihe Kunststofftechnik Leoben: 26. Leobener Kunststoff-Kolloquium. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 67-76 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2016
  25. Published

    Characterization and Prediction of Fiber Orientation in Short Fiber Reinforced Thermoplastics

    Morak, M., Tscharnuter, D., Lucyshyn, T., Gross, T., Steinberger, R., Göttlinger, M. & Hahn, W., 16 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., Struklec, T., Lucyshyn, T. & Holzer, C., Oct 2016. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

    Lucyshyn, T., Burgsteiner, M., Graninger, G. & Holzer, C., Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS. Vol. 1779. 5 p. 020009

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Influence of mold steel on injection molding process: Experimental and numerical studies

    Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Injection Molds - The Key to Quality Products

    Holzer, C. & Lucyshyn, T., 23 Sept 2016.

    Research output: Contribution to conference › Abstract

  30. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Kunststoffe - Fluch oder Segen?

    Lucyshyn, T., 3 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Simulation des Einflusses der thermischen Eigenschaften des Werkzeugstahls auf den Spritzgießprozess

    Lucyshyn, T., 26 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  38. 2015
  39. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  40. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

    Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Jun 2015, In: Journal of Applied Polymer Science. 132, 23, p. 1-12 12 p., 42025.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Besondere Aspekte bei der Herstellung mikrostrukturierter Spritzgussteile

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, Schriftenreihe Kunststofftechnik Leoben: 24. Leobener Kunststoff-Kolloquium. Leoben, Vol. 05. p. 198-207 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Research in manufacturing of micro-structured injection molded polymer parts

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, AIP Conference Proceedings. Vol. 1695. p. 1-9 9 p. 020014

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    The mold in the focus of research for improved quality of injection molded parts

    Lucyshyn, T., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  45. 2014
  46. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Spritzgießtechnologie

    Lucyshyn, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2013
  57. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Capabilities of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Holzer, C., Lucyshyn, T., Balika, W. & Moderegger, S., 2013, Proceedings of the Asia-Australasia Conference of PPS 2013. p. 051-051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Compact Recreational Rebreather With Innovative Gas Sensing Concept and Low Work of Breathing Design

    Sieber, A., Schuster, A., Reif, S., Kessler, M., Lucyshyn, T., Buzzacott, P. & Enoksson, P., 2013, In: Marine Technology Society journal. 47, 6, p. 27-41

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Design of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    DESIGN OF A DEMOLDING FORCE MEASUREMENT TOOL FOR INJECTION MOLDING

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Entformungskraftmessung an mikrostrukturierten Bauteilen

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 90-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Grenzflächenphänomene im Mehrkomponenten-Spritzguss

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium. p. 58-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    High-End Spritzgießsimulation

    Lucyshyn, T., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    IMPACT OF INJECTION MOLDING PARAMETERS ON THE FIBERLENGTH DISTRIBUTION AND THE MECHANICAL PROPERTIES OF A SHORT CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE

    Janko, M., Lucyshyn, T., Schlögl, S., Raimann, P., Lenko, D., Meisel, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    INTERFACE CONDITIONS OF TWO-SHOT MOLDED PARTS

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. 2012
  77. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 7 Mar 2012, Patent No. GB1201067.4

    Research output: Patent

  78. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

    Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 123, p. 1162-1168

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    EXINMOLD: a Design Support Software for Injection Mold Makers

    Holzer, C., Kisslinger, T., Hirner, M., Lucyshyn, T. & Langecker, G., 2012,

    Program & Abstracts of PPS 2011

    .     p. 134-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2011
  88. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 27 Jul 2011, Patent No. 10196048

    Research output: Patent

  89. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 30 Jun 2011, Patent No. 102009055314

    Research output: Patent

  90. Published

    A new setup for viscosity measurements of fluids as a function of shear rate and pressure

    Gallaun, U., Zurk, A.-P., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 276-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    A physical model for a quality control concept in injection moulding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 251-251

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Investigations of adhesion on two-shot moulded parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 153-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. 2010
  96. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    INVESTIGATIONS OF ADHESION ON TWO-SHOT MOULDED PARTS

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Virtual determination of a process window for injection moulding

    Lucyshyn, T., Kukla, C., Kipperer, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. 2009
  102. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  103. Published

    EXINMOLD

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Messung von pvT-Daten bei prozessnahen Abkühlraten und deren Einfluss auf die Simulation von Schwindung und Verzug mit Moldflow Plastics Insight

    Lucyshyn, T., 2009

    Research output: Thesis › Doctoral Thesis

  106. Published

    Spritzgießsimulation

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. 2008
  108. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, PPS-24. p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  110. Published

    Measurement of PVT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  111. 2007
  112. Published

    Expertensystem Spritzgießtechnik: Vom Design bis zum qualitätsgeprüften Formteil

    Langecker, G., Fischer, K., Lucyshyn, T., Fertschej, A. & Hirner, M., 2007,

    H.F. Mark Symposium 2007 - Fortschritte auf dem Gebiet der Elastomere & Thermoplastischen Elastomere

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Optical measuring technique for the verification of warpage computations with moldflow plastics insight (MPI)

    Fischer, K., Wassertheurer, M., Lucyshyn, T. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. 2006
  115. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  116. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen

    Fischer, K., Langecker, G., Lucyshyn, T. & Hirner, M., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results

    Lucyshyn, T., Duretek, I., Langecker, G. & Fischer, K., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 237-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T., Fischer, K. & Duretek, I., 2006

    Research output: Non-textual form › Web publication/site › Research

  120. Published

    Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug

    Lucyshyn, T., Duretek, I., Fischer, K. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Stoffdaten und Simulation

    Lucyshyn, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  122. 2004
  123. Published

    3D-Bauteilvermessung im Spritzguss-Werkzeugbau

    Lucyshyn, T., Fischer, K. & Langecker, G., 2004, In: VLK-News. p. 8-11

    Research output: Contribution to journal › Article › Research › peer-review

  124. 1999
  125. Published

    Rheologische Charakterisierung von zwei PVC-U-Mischungen unter Berücksichtigung des Wandgleitens

    Lucyshyn, T., 21 Jun 1999, 123 p.

    Research output: Thesis › Diploma Thesis › peer-review

View graph of relations

Contact

Phone: 3510

Latest Research Output

View more (106)