Svea Mayer

(Former)

1 - 218 out of 218Page size: 500

Publications / Theses

  1. 2021
  2. Published

    Local-probe based electrical characterization of a multiphase intermetallic γ-TiAl based alloy

    Kratzer, M., Huszar, M., Tengg, L., Billovits, T., Kaufmann, B., Supancic, P., Clemens, H., Mayer, S. & Teichert, C., 28 May 2021, In: Journal of applied physics. 129, 20, 205107.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

    Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H. & Mayer, S., Apr 2021, In: Intermetallics. 2021, 131, p. 1-10 107109.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Laser powder bed fusion of an engineering intermetallic TiAl alloy

    Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., Mar 2021, In: Materials and Design. 2021, 201, p. 1-11 109506.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    An additively manufactured titanium alloy in the focus of metallography

    Fleißner-Rieger, C., Pogrielz, T., Obersteiner, D., Pfeifer, T., Clemens, H. & Mayer, S., 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 1, p. 4-31 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., 2021, In: Computational materials science. 2021, 197, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

    Donchev, A., Mengis, L., Couret, A., Mayer, S., Clemens, H. & Galetz, M., 2021, In: Intermetallics. 2021, 139, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology

    Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., 2021, In: Intermetallics. 2021, 138, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2020
  10. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced Engineering Materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journal › Editorial › peer-review

  12. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    An Advanced TiAl Alloy for High-Performance Racing Applications

    Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H. & Mayer, S., 22 Oct 2020, In: Materials. 13.2020, 21, p. 1-14 14 p., 4720.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Ab initio study of chemical disorder as an effective stabilizing mechanism of bcc-based TiAl(+Mo)

    Abdoshahi, N., Spörk-Erdely, P., Friák, M., Mayer, S., Šob, M. & Holec, D., 2 Oct 2020, In: Physical review materials . 2020, 10, p. 1-14 103604.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 2020, In: Advanced Engineering Materials. 2020, p. 1-32

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructural and Phase Analysis of an Additively Manufactured Intermetallic TiAl Alloy using Metallographic Techniques and High-Energy X-Rays

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2020, In: Practical metallography = Praktische Metallographie. p. 84-95

    Research output: Contribution to journal › Article › Research

  17. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 792, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2019
  19. Published

    Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

    Wartbichler, R., Clemens, H. & Mayer, S., 1 Dec 2019, In: Advanced Engineering Materials. 21, 12, 1900800.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114, 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 4, p. 220-229 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conference › Poster › Research

  28. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Materialographie intermetallischer Titanaluminide - die (additive) Fertigung macht den Unterschied

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 21-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Metallography of Intermetallic Titanium Aluminides – the ( Additive ) Manufacturing Makes the Difference

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, In: Practical metallography = Praktische Metallographie. p. 567-584

    Research output: Contribution to journal › Article › Research

  31. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mikrostruktur- und Phasenanalyse einer additiv gefertigten intermetallischen TiAl Legierung mittels metallographischer Methoden und hochenergetischer Röntgenstrahlung

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 155-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2018
  34. Published

    Untersuchung des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in-und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 1 Oct 2018, In: Praktische Metallographie/Practical Metallography. 55, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, In: Materials Science Forum. 2018, 941, p. 1484-1489 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  40. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2018, In: Intermetallics. p. 27-33

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Invenstigation of the Precipitation Behavior of H-Carbides in a TiAI Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 10, p. 693-703

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018, In: Acta materialia. p. 193-205

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Metallographische Methoden der Pulvercharacterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Clemens, H. & Mayer, S., 2018, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. p. 64-68

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Multi-Scale Microstructural Characterization - The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 9, p. 584-602

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 2018, In: Scripta materialia. p. 70-74

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 2018, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  52. 2017
  53. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced Engineering Materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Advanced intermatallic titanium aluminides - from fundamentals to application

    Mayer, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  55. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, In: Materials Science Forum. 879, p. 113-118 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 2017, In: Materials and Design. 131

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Impact of alloying on stacking fault energies in ϒ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2017, In: Applied Sciences. 7, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 85, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, p. 495-502

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., No, M. L., Juan, J. S., Clemens, H. & Mayer, S., 2017, In: Acta materialia. 127, p. 440-450

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  67. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/Report › Scholarly edition

  68. Published

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 2017, In: Intermetallics. p. 100-109

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2017, In: MRS Advances.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2016
  73. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Advancement of Compositional and Microstructural Design of Intermetallic -TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9, p. 755-774 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  79. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  82. Published

    Characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  83. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Preparation Methods for Examining the ωo-Phase Formation in a β-Solidifying TiAl Alloy via Atom Probe Tomography

    Schachermayer, M., Klein, T., Clemens, H. & Mayer, S., 2016, In: Practical metallography = Praktische Metallographie. 53, 2, p. 73-85 13 p., 53 (2016) 2.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Silicon distribution and silicide precipitation in an advanced multi-phase γ-TiAl based alloy during annealing

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Poster › Research

  92. 2015
  93. Published

    Improving the creep behavior and microstructural stability of an advanced γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 14 Dec 2015.

    Research output: Contribution to conference › Presentation › Research

  94. Published

    Ab initio study on stacking faults in gamma-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Enhancing the operation temperature of TiAl-alloys

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 19 May 2015.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase

    Holec, D., Legut, D., Isaeva, L., Souvatzis, P., Clemens, H. & Mayer, S., 1 Jan 2015, In: Intermetallics. 61, p. 85-90 6 p., 5631.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Advanced intermetallic titanium aluminides

    Clemens, H., Mayer, S., Smarsly, W., Haberl, U. & Güther, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    Atom probe study of ωo phase in a β phase containing TiAl alloy

    Klein, T., Schachermayer, M., Mendez Martin, F., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  99. Published

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Acta materialia. 94, p. 205-213

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648, p. 208-216

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Decording the nanostructure of advanced TiAl alloys

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 63, p. 19-26

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Enhancement of the application temperature of titanium aluminides

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 342-345

    Research output: Contribution to journal › Article › Research

  104. Published

    Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness

    Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  105. Published

    Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Advanced Engineering Materials. 17, 6, p. 786-790

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    High temperature laser-scanning confocal microscopy for the in-situ investigation of grain growth and phase transformations in intermetallic γ-TiAl based alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 259-269

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden

    Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  109. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  112. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbau- werkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, p. 19-28.

    Research output: Contribution to conference › Presentation › Research › peer-review

  113. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 12, p. 691-720

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  116. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  117. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  120. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  122. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  123. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  125. 2014
  126. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  128. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  130. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  133. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  137. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  140. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  141. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  143. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  144. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  145. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conference › Presentation › Research › peer-review

  148. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  152. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  154. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

    Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, In: Advanced Engineering Materials. 16, p. 445-451

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  157. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Mikrostruktur - Eigenschaftsbeziehung einer warmumgeformten intermetallischen γ-TiAl-Legierung

    Lehner, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  159. Published

    Oxidation protection of multiphase Mo containing gamma-TiAl based alloys

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  160. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  161. Published

    Phasenumwandlungen und Kornwachstumsverhalten in β-stabilisierten TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  162. Published

    Phase transformations and grain growth behaviour in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  163. Published

    Phase transformations and grain growth in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 289-290

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    The use of in-situ characterization techniques for the development of intermetallic titanium aluminides

    Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. 2013
  166. Published

    3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

    Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, In: Advanced Engineering Materials. 15, p. 1125-1128

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Advanced beta-solidiying titanium aluminides – Development status and perspectives

    Clemens, H., Schloffer, M., Schwaighofer, E., Werner, R., Gaitzenauer, A., Rashkova, B., Schmölzer, T., Pippan, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 3-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Characterization of closely crystallographically related phases in gamma-TiAl alloys by HEXRD and TEM imaging

    Gabrisch, H., Mayer, S., Pyczak, F., Rackel, M., Lorenz, U., Schell, N., Schreyer, A. & Stark, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  170. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  171. Published

    Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys

    Clemens, H. & Mayer, S., 2013, In: Advanced Engineering Materials. 15, p. 191-215

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Evolution of the omega-phase and its effect on the hardness of the beta-phase in Ti-44Al-4Nb-1Mo alloys

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  173. Published

    Gefüge und Eigenschaften einer mehrphasigen intermetallischen Titanaluminidlegierung für innovative Leichtbauanwendungen

    Gaitzenauer, A., Schenk, M., Kuchling, W., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 113-117

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    High temperature oxidation protection of multi-phase Mo-containing TiAl-alloys by the fluorine effect

    Donchev, A., Pflumm, R., Mayer, S., Clemens, H. & Schütze, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    In situ high-energy XRD study of the hot-deformation behavior of a novel gamma-TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Clemens, H., Lippmann, T., Lottermoser, L., Schreyer, A. & Pyczak, F., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Microstructure – Property Relationship in a Near Net Shape Forged γ-TiAl Based Alloy

    Gaitzenauer, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Optimized Hot-forming of an Intermetallic Multi-phase gamma-TiAl based alloy

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 29-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Relaxation processes at high temperatures in an TiAl-Nb-Mo intermetallics

    Simas, P., Schmölzer, T., Mayer, S., No, M. L., Clemens, H. & Juan, J. S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 41-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach

    Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. 2012
  181. Published

    Eigenschaftsoptimiertes Warmumformen einer intermetallischen Titanaluminid-Legierung

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 319-322

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Hot Deformation of Cast and Extruded TiAl: An In-situ Diffraction Study

    Schmölzer, T., Liss, K.-D., Mayer, S., Yan, K., Reid, M., Dippenaar, R., Peel, M. & Clemens, H., 2012,

    Proceedings of International Conference of Processing & Manufacturing of Advanced Materials

    .     p. 1725-1730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    In situ forging experiments at HARWI II with advanced TiAl alloys: HASYLAB Annual Report

    Stark, A., Schwaighofer, E., Mayer, S., Lottermoser, L., Lippmann, T., Oehring, M., Clemens, H., Pyczak, F. & Schreyer, A., 2012

    Research output: Non-textual form › Web publication/site › Research

  185. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced Engineering Materials. 14, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    In situ study of the hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Stark, A., Lottermoser, L., René, K., Clemens, H., Mayer, S. & Schell, N., 2012

    Research output: Non-textual form › Web publication/site › Research

  187. Published

    In situ synchrotron radiation study during hot compressive deformation of a novel gamma TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Lippmann, T., Lottermoser, L., Pyczak, F., Clemens, H. & Schreyer, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  188. Published

    In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy

    Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, In: Advanced Engineering Materials. 14, p. 445-448

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Micro- and nanostructure evolution in intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 395-403

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Microstructural evolution and mechanical properties of a cast and heat-treated TiAl alloy

    Schwaighofer, E., Lindemann, J., Klose, J., Guether, V., Schloffer, M., Schmölzer, T., Clemens, H. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  191. Published

    Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy

    Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  193. Published

    Mikrostruktur und mechanische Eigenschaften einer intermetallischen gamma TiAl-Basislegierung für Leichtbauanwendungen: Forum für Metallurgie und Werkstofftechnik

    Schwaighofer, E., Mayer, S. & Clemens, H., 2012

    Research output: Non-textual form › Web publication/site › Research

  194. Published

    The effect of molybdenum on the phase transformation behavior of beta/gamma-TiAl alloys

    Mayer, S., Sailer, C., Lindemann, J., Lippmann, T., Takeyama, M., Staron, P. & Clemens, H., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 1421-1424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. 2011
  196. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti-44 at% Al-(3-7) at% Mo alloys.

    Schmölzer, T., Mayer, S., Sailer, C., Haupt, F., Güther, V., Staron, P., Liss, K.-D. & Clemens, H., 2011, In: Advanced Engineering Materials. 13, p. 306-311

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Intermetallisches Titanaluminid - Ein innovativer Leichtbauwerkstoff für Hochtemperaturanwendungen

    Clemens, H. & Mayer, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht - eine Fortsetzung

    Clemens, H. & Mayer, S., 2011, In: Practical metallography = Praktische Metallographie. p. 64-100

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    On phase equilibria and phase transformations in ß/y-TiAl alloys - a short review

    Mayer, S., Sailer, C., Schmölzer, T., Clemens, H., Lippmann, T., Staron, P., Güther, V. & Takeyama, M., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 438-442

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Phase Equilibria and Phase Transformations in Molybdenum-Containing TiAl Alloys

    Mayer, S., Sailer, C., Nakashima, H., Schmölzer, T., Lippmann, T., Staron, P., Liss, K.-D., Clemens, H. & Takeyama, M., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Phase fraction evolution in a multi-phase intermetallic gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Clemens, H., Stark, A., Staron, P., Lippmann, T. & Mayer, S., 2011

    Research output: Non-textual form › Web publication/site › Research

  203. Published

    Phase transition and ordering behavior of ternary Ti-Al-Mo alloys using in-situ neutron diffraction

    Kabra, S., Yan, K., Mayer, S., Schmölzer, T., Reid, M., Dippenaar, R., Clemens, H. & Liss, K.-D., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 697-702

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, In: Advanced Engineering Materials. p. 685-699

    Research output: Contribution to journal › Article › Research › peer-review

  207. 2010
  208. Published

    Characterization of TiAl by means of in-situ synchrotron radiation

    Schmölzer, T., Liss, K.-D., Zickler, G., Mayer, S. & Clemens, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    Charakterisierung einer Pulvermetallurgisch hergestellten TNM TM-Titanaluminid Legierung mittels komplementärer quantitativer Methoden

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 239-244

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Einfluss der bainitischen Umwandlung auf die mechanischen Eigenschaften von Warmarbeitsstählen

    Mayer, S., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    Einfluss von Wärmebehandlungen auf das Gefüge einer mehrphasigen Titanalumind-Legierung

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Clemens, H. & Guether, V., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht

    Clemens, H. & Mayer, S., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 13-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In-Situ Diffraction Experiments

    Schmölzer, T., Mayer, S., Haupt, F., Zickler, G., Sailer, C., Lottermoser, L., Güther, V., Liss, K.-D. & Clemens, H., 2010, In: Materials Science Forum. p. 456-459

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    Reibschweißen von intermetallischen Titanaluminiden - Gefügeentwicklung und mechanische Eigenschaften

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 227-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    The effect of Si on phase fractions and transition temperatures of a TiAl-Mo alloy: HASYLAB Annual Report

    Schmölzer, T., Mayer, S., Schwaighofer, E., Lippmann, T., Staron, P., Stark, A. & Clemens, H., 2010

    Research output: Non-textual form › Web publication/site › Research

  216. 2009
  217. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  218. Published

    Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 86-91

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Einfluss einer bainitischen / martensitischen Mikrostruktur auf die mechanischen Eigenschaften von Warmarbeitsstählen

    Mayer, S., 2009

    Research output: Thesis › Doctoral Thesis

  220. Published

    Influence of alloying elements on the martensitic and bainitic structure of hot work Tool steels

    Siller, I., Mayer, S., Caliskanoglu, D. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 635-642

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  221. 2008
  222. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  223. 2007
  224. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  225. Published

    “Influence of bainitic and martensitic microstructures on the mechanical properties of hot-work tool steels”

    Mayer, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  226. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journal › Article › Research › peer-review

  227. 2006
  228. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Influence of bainitic/martensitic microstructures on the mechanical properties of hot-work tool steels

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  230. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  231. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Warmarbeitsstähle

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  233. 2005
  234. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Zur Entwicklung von kornwachstumsstabilisierten Tantaldrähten

    Mayer, S., Bischof, M. A., Leitner, H., Clemens, H., Voiticek, A. & Knabl, W., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 246-250

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (218)