Stephan Schuschnigg

1 - 20 out of 94Page size: 20

Publications / Theses

  1. 2021
  2. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72, p. 604-612

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2020
  5. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  6. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13, 14, 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  8. Published

    Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

    Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication

    Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2019
  11. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  12. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  14. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  15. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  17. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2018
  19. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  20. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11, p. 2-36 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  23. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguz, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 134, p. 1 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers / Molecular Diversity Preservation International. 10, 490, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 3511

Latest Research Output

View more (94)