Ronald Schnitzer

1 - 103 out of 103Page size: 500

Publications / Theses

  1. 2021
  2. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  3. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., 2021, In: Steel research international. 2021, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 821, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 2021, 112, p. 262-270

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of microalloying elements and deformation parameters on the recrystallization and precipitation behavior of two low-alloyed steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., 2021, In: Steel research international. 2021, 2100065, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., 2021, In: Materialia. 2021, 15, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Influence of the heat input on the dentritic solidification structure and the mechanical properties of 2.25Cr-1Mo-0,25V submerged-arc weld metal

    Schönmaier, H., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., 2021, In: Journal of Materials Engineering and Performance. p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Microstructure and local mechanical properties of the heat-affected zone of a resistance spot welded medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 2021, In: Materials. 2021, 14, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 815, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2020
  14. Published

    Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

    Göbl, M., Eder, H., Prestl, A., Siller, I. & Schnitzer, R., 2 Dec 2020, In: Metals : open access journal . 10, 12, p. 1-11 11 p., 1622.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Defects in a laser powder bed fused tool steel

    Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B. & Schnitzer, R., 13 Oct 2020, (E-pub ahead of print) In: Advanced Engineering Materials. 2020, 2000833, 11 p., 2000833 .

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 15 Sept 2020, In: Acta materialia. 2020, 197, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Continuous Cooling Transformation Diagrams of 2.25Cr-1Mo-0.25V Submerged-Arc Weld Metal and Base Metal

    Schönmaier, H., Loder, B., Fischer, T., Grimm, F., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Aug 2020, In: Metals : open access journal . 10, 8, p. 1-19 19 p., 1055.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Determination of Martensite Start Temperature of High‐Speed Steels Based on Thermodynamic Calculations

    Platl, J., Leitner, H., Turk, C. & Schnitzer, R., 27 May 2020, In: Steel research international. 91.2020, 8, 8 p., 2000063.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Etching methods for the microstructural characterization of a heat resistant 2.25Cr-1Mo-0.25V weld metal

    Schönmaier, H., Pölzgutter, M. & Schnitzer, R., Jan 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 1, p. 5-30 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Defect and microstructure characterization of laser powder bed fused tool steels

    Platl, J., Schnitzer, R., Leitner, H. & Turk, C., 2020, Proceedings of Metal Additive Manufacturing Conference 2020.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Precipitation reactions in a Cu-Ni-Al medium carbon alloyed dual hardening steel

    Hofinger, M., Turk, C., Ognianov, M., Leitner, H. & Schnitzer, R., 2020, In: Materials characterization.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2019
  25. E-pub ahead of print

    Microstructural evolution of 2.25Cr-1Mo-0.25V submerged-arc weld metal

    Schönmaier, H., Grimm, F., Krein, R., Kirchheimer, K. & Schnitzer, R., 14 Dec 2019, (E-pub ahead of print) In: Welding in the world. 64.2020, 2, p. 379-393 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels

    Esterl, R., Sonnleitner, M., Weißensteiner, I., Hartl, K. & Schnitzer, R., 5 Jul 2019, In: Journal of materials science. 54.2019, 19, p. 12875-12886 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation

    Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 7, p. 3238 - 3245 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 1 Mar 2019, In: Steel research international. 90.2019, 3, 10 p., 1800500.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Microstructural evolution of a dual hardening steel during heat treatment

    Hofinger, M., Staudacher, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 10 Feb 2019, In: Micron. 120.2019, May, p. 48-56 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Early Stages of Precipitate Formation in a Dual Hardening Steel * Frühe Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 2019, In: HTM - journal of heat treatment and materials . p. 293-301

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Frühere Stadien der Ausscheidungsbildung eines dualhärtenden Stahls

    Hofinger, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 2019, ASMET Werkstofftechniktagung 2019 & 31. Härtereitagung. p. 102-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Influence of V and Nb Micro-Alloying on Direct Quenched and Tempered Ultra-High Strength Steels

    Esterl, R., Schnitzer, R., Sonnleitner, M. & Gschöpf, B., 2019, In: Steel research international. 90.2019, 9 p., 800640.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microstructural characterization of a double pulse resistance spot welded 1200 Mpa TBF steel

    Stadler, M., Gruber, M., Schnitzer, R. & Hofer, C., 2019, In: Welding in the world. 2020, p. 335-343

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  38. 2018
  39. Published

    Influence of inhomogeneity on several length scales on the local mechanical properties in V-alloyed all-weld metal

    Haslberger, P., Ernst, W., Schneider, C., Holly, S. & Schnitzer, R., 13 Aug 2018, In: Welding in the world. 62.2018, 6, p. 1153-1158 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Development of high-strength welding consumables using calculations and microstructural characterisation

    Holly, S., Haslberger, P., Zügner, D., Schnitzer, R. & Kozeschnik, E., 14 Feb 2018, In: Welding in the world. 62.2018, 3, p. 451-458 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    A high-resolution sight on the compositional differences of proeutectoid- and pearlitic cementite

    Landefeld, A. & Schnitzer, R., 2018.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Computational Analysis of the yield stress of ultra-high strength all-weld metals

    Zügner, D., Holly, S., Ernst, W., Schnitzer, R. & Kozeschnik, E., 2018, 12th International Seminar on Numerical Analysis of Weldability.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Correlation of heat treatment parameters, microstructure and mechanical properties of 3rd generation AHSS

    Ebner, S., Suppan, C., Schnitzer, R. & Hofer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Microstructural characterization of ultra-high strength martensitic steels

    Esterl, R., Sonnleitner, M., Stadler, M., Wölger, G. & Schnitzer, R., 2018, In: Practical metallography = Praktische Metallographie. p. 203-222

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Microstructure and mechanical properties of high-strength steel welding consumables with a minimum yield strength of 1100 MPa

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 2018, In: Journal of materials science. p. 6968-6979

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Multi-Scale Microstructural Characterization - The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 9, p. 584-602

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Precipitates in microalloyed ultra-high strength weld metal studied by atom probe tomography

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 2018, In: Welding in the world. p. 713-719

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2017
  51. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

    Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 2017, In: Welding in the world. 61, 1, p. 11-18 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2017, In: Science and Technology of Welding and Joining. p. 336-342

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Influence of alloying elements on the mechanical properties of high-strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 2017, In: Science and Technology of Welding and Joining. 22, 6, p. 536–543

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Influence of heat treatment on microstructure stability and mechanical properties of a carbide-free bainitic steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 2017, In: Advanced Engineering Materials. 19, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2017, In: Welding in the world. 61, p. 423 - 434

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Microstructural Characterization of Martensitic All-Weld Metal Samples

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 2017, In: Practical metallography = Praktische Metallographie. 54, p. 513-532

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Welding of S960MC with undermatching filler material

    Schneider, C., Ernst, W., Schnitzer, R., Staufer, H., Vallant, R. & Enzinger, N., 2017, Proceeding 70th IIW .

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. 2016
  61. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnik, E., 12 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  63. Published

    Development of the strongest welding consumables

    Schnitzer, R., Zügner, D., Haslberger, P., Holly, S., Ernst, W. & Enzinger, N., 1 Jun 2016, p. 1-28. 28 p.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 10 May 2016.

    Research output: Contribution to conference › Presentation › Research

  65. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal 

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnnik, E., 1 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Austenitic stainless steel bismuth-free flux-cored wires for high-temperature applications

    Westin, E. M., Schnitzer, R., Ciccomascolo, F., Maderthoner, A. & Grönlund, K., 2016, In: Welding in the world. 60, 6, p. 1147-1158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Creep Rupture Strength of Dissimilar CB2-P92 FCW Joint Welds

    Baumgartner, S., Pahr, H. & Schnitzer, R., 2016, Advances in Materials Technoloy for Fossil Power Plants: Proceedings from the Eighth International Conference Oct 11-14, 2016, Albufeira, Algarve, Portugal. p. 952-962 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    High resolution imaging of martensitic all-weld metal

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  69. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  70. Published

    Mikrostrukturielle Charakterisierung von ultra-hochfesten Schweißgütern

    Haslberger, P., Ernst, W. & Schnitzer, R., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 321-324 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2013
  72. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  74. 2012
  75. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  76. Published

    New developed filler metals for welding of high strength steels

    Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11

    Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  78. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  79. 2011
  80. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced Engineering Materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Nuovi materiali d´apporto sviluppati per i nouvi acciai ad alto snervamento della voestalpine AG

    Schnitzer, R., Posch, G., Fiedler, M., Strauß, C., Rauch, R., Fössl, T., Böck, B. & Bonalumi, P., 2011, Giornati Nazionali di Saldatura - GNS6. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Structure-Properties Relationship of a Stainless Maraging Steel

    Schnitzer, R., 2011, 125 p.

    Research output: Thesis › Doctoral Thesis

  83. 2010
  84. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    DIE AUSSCHEIDUNGSKINETIK DER NICKEL-BASIS SUPERLEGIERUNG ATI ALLVAC 718PLUS

    Zickler, G., Schnitzer, R., Radis, R., Kozeschnik, E., Schweins, R., Stockinger, M. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

    Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2065-2070

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Laser-Sealed Fülldraht-Fertigungstechnologie

    Posch, G., Fiedler, M., Bauer, P., Michael, B., Böck, B., Schnitzer, R., Strauss, C. & Moitzi, G., 2010, Join-Ex: Internationaler Fachkongress der Schweiß und Verbindungstechnik. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Modeling of the yield strength of a stainless maraging steel

    Schnitzer, R., Zinner, S. & Leitner, H., 2010, In: Scripta materialia. p. 286-289

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    NEW SAMPLE ENVIRONMENTS FOR IN-SITU MATERIALS SCIENCE SYNCHROTRON RADIATION STUDIES

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Reverted austenite in PH 13-8 Mo maraging steels

    Schnitzer, R., Radis, R., Nöhrer, M., Schober, M., Hochfellner, R., Zinner, S., Povoden-Karadeniz, E., Kozeschnnik, E. & Leitner, H., 2010, In: Materials chemistry and physics (including materials science communications ; an international interdisciplinary journal on science, characterization and processing of advanced materials). p. 138-145

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    The Precipitation Behavior of Superalloy ATI Allvac 718Plus

    Zickler, G., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M. & Leitner, H., 2010, In: Advanced Engineering Materials. p. 176-183

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Transformation of reverted austenite in a maraging steel studied by in-situ X-ray diffrcation

    Zickler, G., Schnitzer, R., Lippmann, T. & Leitner, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. 2009
  96. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    In-situ X-ray diffraction study of the transformation of reverted austenite in the maraging steel PH 13-8 Mo

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2008
  108. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  109. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  110. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  111. 2007
  112. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

  113. 2006
  114. Published

    Charakterisierung einer hoch niobhaltigen intermetallischen Titanaluminid-Legierung

    Schnitzer, R., 2006, 93 p.

    Research output: Thesis › Diploma Thesis

  115. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  116. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. 2005
  118. Published

    Texture characterisation of extruded TiAl

    Chladil, H., Klauber, W. & Schnitzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

View graph of relations

Contact

Phone: 4200

Latest Research Output

View more (103)