Ralf Schledjewski

(Former)

1 - 100 out of 206Page size: 100

Publications / Theses

  1. 2024
  2. Published

    Manufacturing bio-based fiber-reinforced polymer composites: process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10, 1, 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., Mar 2023, In: Journal of composites science. 7, 3, 122.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A COMPARATIVE STUDY ON MANUFACTURING TECHNIQUES FOR PRODUCTION OF SUSTAINABLE RECYCLATE SANDWICH COMPOSITES

    Ravindran, B., Feuchter, M. & Schledjewski, R., 2023.

    Research output: Contribution to conference › Paper › peer-review

  6. 2021
  7. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS): Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 22 Jul 2021.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. E-pub ahead of print

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., 15 Jun 2021, (E-pub ahead of print) In: Polymer Composites. 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 2021, In: Advanced Manufacturing: Polymer and Composites Science. 7, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. 2020
  16. Published

    Fatigue monitoring of flax fibre reinforced epoxy composites using integrated fibre-optical FBG sensors

    Szebényi, G., Blößl, Y., Hegedüs, G., Tábi, T., Czigany, T. & Schledjewski, R., 20 Oct 2020, In: Composites science and technology. 199, 108317.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A robust empirical model equation for the compaction response of textile reinforcements

    Blößl, Y. & Schledjewski, R., 1 Oct 2020, In: Polymer Composites. 42.2021, 1, p. 297-308 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Applicability of fiber Bragg grating sensors for cure monitoring in resin transfer molding processes

    Blößl, Y., Hegedüs, G., Szebényi, G., Tábi, T., Schledjewski, R. & Czigany, T., 10 Sept 2020, In: Journal of Reinforced Plastics and Composites.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system

    Costa Dias, R. D. C., Leali Costa, M., Santos, L. D. S. & Schledjewski, R., 22 Jun 2020, In: Thermochimica Acta. 690.2020, August, 12 p., 178636.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Reliable and Sustainable composite production for Biobased Components (RSBC) Verarbeitung und Prozessmonitoring

    Schledjewski, R., Blößl, Y. & Salzmann, M., 18 Feb 2020.

    Research output: Contribution to conference › Poster › Transfer

  21. Published

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 2 Jan 2020, In: Advanced Manufacturing: Polymer and Composites Science. 6, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. 2019
  24. Published

    SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT

    Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  33. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 1 Jan 2019, In: International Journal of Production Research. 57, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  40. 2018
  41. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Path calculation, technology and opportunities in dry fiber winding: A review

    Sofi, T., Neunkirchen, S. & Schledjewski, R., 3 Jul 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4, 3, p. 57-72 16 p.

    Research output: Contribution to journal › Review article › peer-review

  45. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  47. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2, 2

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    A built-in sensor with carbon nanotubes coated by Ag clusters for deformation monitoring of glass fibre/epoxy composites

    Slobodian, P., Riha, P., Matyas, J., Olejnik, R., Lloret Pertegás, S., Schledjewski, R. & Kovar, M., 5 Apr 2018, In: Journal of Physics: Conference Series. 987, 1, 012017.

    Research output: Contribution to journal › Conference article › peer-review

  55. Published

    Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection

    Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 1 Mar 2018, In: Composites science and technology. 156, p. 61-69 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 2018, 39(2), p. 360-367 8 p., 2018, 39(2).

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    ELLIPTIC PARABOLOID FLOW FRONT MODELLING FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY THE RADIAL FLOW TECHNIQUE

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, In: Advanced Manufacturing: Polymer and Composites Science.

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2017
  66. Published

    Monitoring of FRPC manufacturing processes

    Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.

    Research output: Contribution to conference › Paper

  67. Published

    Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact

    Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. p. 58-65

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie

    Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications : TTP, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings

    Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25, 5, p. 315-326 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades

    Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Continuous welding of unidirectional fiber reinforced thermoplastic tape material

    Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  81. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen

    Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  83. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  85. Published

    Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen

    Blößl, Y. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  86. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  87. Published

    Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure

    Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). p. 402-407 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Permeability customisation through preform manipulation utilising 3d-printing technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Jan 2017, In: Polymers and Polymer Composites. 25, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. 2016
  92. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 1 Nov 2016, Materials Science Forum. Vol. 879. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection

    Lloret Pertegas, S., Matyas, J., Olejnik, R., Slobodian, P. & Schledjewski, R., Nov 2016.

    Research output: Contribution to conference › Paper

  94. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms

    Konstantopoulos, S., Hueber, C., Mühlbachler, E. & Schledjewski, R., 20 Sept 2016, In: Advanced Manufacturing: Polymer and Composites Science. p. 57-66 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Nanostructured CNT based sensing films used in multi-functional hybrid composites

    Schledjewski, R., Lloret Pertegas, S., Matyas, J., Olejnik, R. & Slobodian, P., 15 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  97. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 9 Sept 2016, IOP Conference Series: Materials Science and Engineering. Vol. 139(1). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes

    Schledjewski, R. & Maier, A., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Schledjewski, R. & Konstantopoulos, S., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions

    Konstantopoulos, S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Automated tape laying (ATL) process simulation through 3d thermos-mechanical model

    Schledjewski, R., Satheesh, B. & Duplesis Kergomard, Y., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Improved cure simulation in pultrusion process about heating systems: A case study

    Costa Dias, R. D. C., Santos, L. S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Hybrid structures manufactured by using thermoplastic tape placement for local reinforcement build-up

    Schledjewski, R., Satheesh, B. & Duplessis Kergomard, Y., 23 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  105. Published

    Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic

    Schledjewski, R. & Grössing, H., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  106. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2, 1

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 1 Jun 2016, In: Polymer Composites. 37, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Review of cost estimation: methods and models for aerospace composite manufacturing

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. Vol. 2

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (206)