Petra Spörk-Erdely

(Future)

1 - 32 out of 32Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Book of Abstracts Polymer Meeting 14. TU Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction

    Staron, P., Stark, A., Schell, N., Spörk-Erdely, P. & Clemens, H., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-13 13 p., 727.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    In situ investigation of the rapid solidification behavior of intermetallic γ-TiAl-based alloys using high-energy X-ray diffraction

    Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 2021, In: Advanced Engineering Materials. 2021, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy

    Klein, T., Graf, G., Staron, P., Stark, A., Clemens, H. & Spörk-Erdely, P., 2021, In: Materials letters. 2021, 303, p. 1305001-1305004

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2020
  7. Published

    Ab initio study of chemical disorder as an effective stabilizing mechanism of bcc-based TiAl(+Mo)

    Abdoshahi, N., Spörk-Erdely, P., Friák, M., Mayer, S., Šob, M. & Holec, D., 2 Oct 2020, In: Physical review materials . 2020, 10, p. 1-14 103604.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spoerk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., Oct 2020, In: Additive Manufacturing. 35, 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 2020, In: Advanced Engineering Materials. 2020, p. 1-32

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 792, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2019
  13. Published

    Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation

    Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conference › Poster › Research

  18. 2018
  19. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018, In: Acta materialia. p. 193-205

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  22. 2017
  23. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced Engineering Materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 2017, In: Materials and Design. 131

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2016
  28. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments

    Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Poster › Research

  34. 2015
  35. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  38. 2014
  39. Published

    In-situ high-energy X-ray diffraction on an intermetallic β-stabilised γ-TiAl alloy

    Erdely, P., 2014

    Research output: Thesis › Diploma Thesis

  40. Published

    In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

View graph of relations

Latest Research Output

View more (32)